Académique Documents
Professionnel Documents
Culture Documents
Description
The KA78XXE / KA78XXAE series of three-terminal positive regulators is available in the TO-220 / D-PAK package with several fixed-output voltages, making them
useful in a wide range of applications. Each type employs
internal current limiting, thermal shut-down, and safe
operating area. If adequate heat sinking is provided, they
can deliver over 1 A output current. Although designed
primarily as fixed-voltage regulators, these devices can
be used with external components for adjustable voltages
and currents.
Output Current up to 1 A
Output Voltages of 5, 6, 8, 9, 10, 12, 15, 18, 24 V
Thermal Overload Protection
Short-Circuit Protection
Output Transistor Safe Operating Area Protection
D-PAK
GND
GND
1. Input
2. GND
3. Output
Block Diagram
INPUT
SERIES
PASS
ELEMENT
1
CURRENT
GENERATOR
STARTING
CIRCUIT
OUTPUT
3
SOA
PROTECTION
REFERENCE
VOLTAGE
ERROR
AMPLIFIER
THERMAL
PROTECTION
GND
2
www.fairchildsemi.com
March 2015
Product Number
Output Voltage
Tolerance(1)
Package
Operating
Temperature
Parking Method
KA7805ETU
KA7806ETU
KA7808ETU
KA7809ETU
KA7810ETU
Rail
KA7812ETU
KA7815ETU
KA7818ETU
4%
-40C to +125C
KA7824ETU
KA7805ERTF
KA7805ERTM
D-PAK(2)
KA7808ERTM
KA7809ERTM
KA7812ERTM
KA7805AETU
KA7809AETU
KA7810AETU
KA7812AETU
2%
0C to +125C
Rail
KA7815AETU
KA7824AETU
Notes:
1. Above output voltage tolerance is available at 25C.
2. Refer to below figure for TM / TF Suffix for DPAK.
www.fairchildsemi.com
2
Ordering Information
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25C unless otherwise noted.
Symbol
VI
Parameter
Input Voltage
Value
VO = 5 V to 18 V
35
VO = 24 V
40
C/W
65
C/W
RJC
RJA
TOPR
TSTG
Unit
KA78XXE / KA78XXER
KA78XXAE
-40 to +125
0 to +125
-65 to +150
C
C
www.fairchildsemi.com
3
Refer to test circuit, -40C < TJ < 125C, IO = 500 mA, VI =10 V, CI= 0.33 F, CO=0.1 F, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ = +25C
4.80
5.00
5.20
Output Voltage
5.0 mA IO 1.0 A, PO 15 W,
VI = 7 V to 20 V
4.75
5.00
5.25
Regline
Line Regulation(3)
TJ = +25C
VI = 7 V to 25 V
4.0
100.0
VI = 8 V to 12 V
1.6
50.0
Regload
Load Regulation(3)
TJ = +25C
IO = 5.0 mA to 1.5 A
100
IO = 250 mA to 750 mA
50
IQ
Quiescent Current
TJ = +25C
IO = 5 mA to 1.0 A
0.03
0.50
VI = 7 V to 25 V
0.30
1.30
-0.8
mV/C
42
VO
IQ
VO/T
IO = 5 mA
VN
(4)
mV
mV
mA
mA
RR
Ripple Rejection
f = 120 Hz, VI = 8 V to 18 V
73
dB
VDrop
Dropout Voltage
IO = 1 A, TJ = +25C
f = 1 kHz
15
Resistance(4)
62
RO
Output
ISC
Short-Circuit Current
VI = 35 V, TA = +25C
230
mA
IPK
Peak Current(4)
TJ = +25C
2.2
Notes:
3. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
4. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
4
Refer to test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 11 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
TJ = +25C
5.75
6.00
6.25
Output Voltage
5.0 mA IO 1.0 A, PO 15 W,
VI = 8.0 V to 21 V
5.70
6.00
6.30
Regline
Line Regulation(5)
TJ = +25C
VI = 8 V to 25 V
5.0
120.0
VI = 9 V to 13 V
1.5
60.0
Regload
Load Regulation(5)
TJ = +25C
IO = 5 mA to 1.5 A
120
IO = 250 mA to 750 mA
60
IQ
Quiescent Current
TJ = +25C
IQ
Quiescent Current
Change
IO = 5 mA to 1 A
0.5
VI = 8 V to 25 V
1.3
VO/T
IO = 5 mA
VN
VO
(6)
mV
mV
mA
mA
-0.8
mV/C
45
RR
Ripple Rejection
f = 120 Hz, VI = 9 V to 19 V
75
dB
VDrop
Dropout Voltage
IO = 1 A, TJ = +25C
f = 1 kHz
19
Resistance(6)
59
Unit
RO
Output
ISC
Short-Circuit Current
VI = 35 V, TA= +25C
250
mA
IPK
Peak Current(6)
TJ = +25C
2.2
Notes:
5. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
6. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
5
Refer to test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 14 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
TJ = +25C
7.7
8.0
8.3
Output Voltage
5.0 mA IO 1.0 A, PO 15 W,
VI = 10.5 V to 23 V
7.6
8.0
8.4
Regline
Line Regulation(7)
TJ = +25C
Regload
Load Regulation(7)
TJ = +25C
IQ
Quiescent Current
TJ = +25C
IQ
Quiescent Current
Change
VO/T
VN
VO
Unit
V
VI = 10.5 V to 25 V
160
VI = 11.5 V to 17 V
80
IO = 5.0 mA to 1.5 A
10
160
IO = 250 mA to 750 mA
80
IO = 5 mA to 1.0 A
0.05
0.50
VI = 10.5 A to 25 V
0.50
1.00
IO = 5 mA
-0.8
mV/C
52
RR
Ripple Rejection
VDrop
Dropout Voltage
(8)
Resistance(8)
56
mV
mV
mA
mA
73
dB
IO = 1 A, TJ = +25C
f = 1 kHz
17
RO
Output
ISC
Short-Circuit Current
VI = 35 V, TA = +25C
230
mA
IPK
Peak Current(8)
TJ = +25C
2.2
Notes:
7. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
8. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
6
Refer to test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 15 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ = +25C
8.65
9.00
9.35
Output Voltage
5.0 mA IO 1.0 A, PO 15 W,
VI = 11.5 V to 24 V
8.60
9.00
9.40
Regline
Line Regulation(9)
TJ = +25C
Regload
Load Regulation(9)
TJ = +25C
IQ
Quiescent Current
TJ = +25C
IQ
Quiescent Current
Change
IO = 5 mA to 1.0 A
0.5
VI = 11.5 V to 26 V
1.3
IO = 5 mA
-1
mV/C
58
VO
VO/T
VN
RR
Ripple Rejection
VDrop
Dropout Voltage
(10)
Resistance(10)
VI = 11.5 V to 25 V
180
VI = 12 V to 17 V
90
IO = 5 mA to 1.5 A
12
180
IO = 250 mA to 750 mA
90
f = 120 Hz, VI = 13 V to 23 V
56
mV
mV
mA
mA
71
dB
IO = 1 A, TJ = +25C
f = 1 kHz
17
RO
Output
ISC
Short-Circuit Current
VI = 35 V, TA = +25C
250
mA
IPK
Peak Current(10)
TJ = +25C
2.2
Notes:
9. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
10. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
7
Refer to test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 16 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ = +25C
9.6
10.0
10.4
Output Voltage
5.0 mA IO 1.0 A, PO 15 W,
VI = 12.5 V to 25 V
9.5
10.0
10.5
Regline
Line Regulation(11)
TJ = +25C
Regload
Load Regulation(11)
TJ = +25C
IQ
Quiescent Current
TJ = +25C
IQ
Quiescent Current
Change
IO = 5 mA to 1.0 A
0.5
VI = 12.5 V to 29 V
1.0
IO = 5 mA
-1
mV/C
58
VO
VO/T
VN
RR
Ripple Rejection
VDrop
Dropout Voltage
(12)
Resistance(12)
VI = 12.5 V to 25 V
10
200
VI = 13 V to 25 V
100
IO = 5 mA to 1.5 A
12
200
IO = 250 mA to 750 mA
400
5.1
8.0
f = 120 Hz, VI = 13 V to 23 V
56
mV
mV
mA
mA
71
dB
IO = 1 A, TJ = +25C
f = 1 kHz
17
RO
Output
ISC
Short-Circuit Current
VI = 35 V, TA = +25C
250
mA
IPK
Peak Current(12)
TJ = +25C
2.2
Notes:
11. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
12. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
8
Refer to test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 19 V, CI = 0.33 F, CO= 0.1 F, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
TJ = +25C
11.5
12.0
12.5
Output Voltage
5.0 mA IO 1.0 A, PO 15 W,
VI = 14.5 V to 27 V
11.4
12.0
12.6
Regline
Line Regulation(13)
TJ = +25C
VI = 14.5 V to 30 V
10
240
VI = 16 V to 22 V
120
Regload
Load Regulation(13)
TJ = +25C
IO = 5 mA to 1.5 A
11
240
IO = 250 mA to 750 mA
120
IQ
Quiescent Current
TJ = +25C
5.1
8.0
IQ
Quiescent Current
Change
IO = 5 mA to 1.0 A
0.1
0.5
VI = 14.5 V to 30 V
0.5
1.0
IO = 5 mA
-1
mV/C
76
VO
VO/T
VN
(14)
mV
mV
mA
mA
RR
Ripple Rejection
f = 120 Hz, VI = 15 V to 25 V
71
dB
VDrop
Dropout Voltage
IO = 1 A, TJ= +25C
f = 1 kHz
18
Resistance(14)
55
RO
Output
ISC
Short-Circuit Current
VI = 35 V, TA = +25C
230
mA
IPK
Peak Current(14)
TJ = +25C
2.2
Notes:
13. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
14. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
9
Refer to test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 23 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
TJ = +25C
14.40
15.00
15.60
Output Voltage
5.0 mA IO 1.0 A, PO 15 W,
VI = 17.5 V to 30 V
14.25
15.00
15.75
Regline
Line Regulation(15)
TJ = +25C
VI = 17.5 V to 30 V
11
300
VI = 20 V to 26 V
150
Regload
Load Regulation(15)
TJ = +25C
IO = 5 mA to 1.5 A
12
300
IO = 250 mA to 750 mA
150
IQ
Quiescent Current
TJ = +25C
5.2
8.0
VO
IQ
VO/T
VN
IO = 5 mA to 1.0 A
0.5
VI = 17.5 V to 30 V
1.0
Unit
V
mV
mV
mA
mA
IO = 5 mA
-1
mV/C
90
(16)
RR
Ripple Rejection
70
dB
VDrop
Dropout Voltage
IO = 1 A, TJ= +25C
f = 1 kHz
19
Resistance(16)
54
RO
Output
ISC
Short-Circuit Current
VI = 35 V, TA= +25C
250
mA
IPK
Peak Current(16)
TJ =+25C
2.2
Notes:
15. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
16. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
10
Refer to test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 27 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
TJ =+25C
17.3
18.0
18.7
Output Voltage
5.0 mA IO 1.0 A, PO 15 W,
VI = 21 V to 33 V
17.1
18.0
18.9
Regline
Line Regulation(17)
TJ = +25C
Regload
Load Regulation(17)
TJ = +25C
IQ
Quiescent Current
TJ =+25C
IQ
Quiescent Current
Change
IO = 5 mA to 1.0 A
0.5
VI = 21 V to 33 V
1.0
IO = 5 mA
VO
VO/T
VN
RR
Ripple Rejection
VDrop
Dropout Voltage
(18)
Resistance(18)
VI = 21 V to 33 V
15
360
VI = 24 V to 30 V
180
IO = 5 mA to 1.5 A
15
360
IO = 250 mA to 750 mA
180
5.2
8.0
f = 120 Hz, VI = 22 V to 32 V
53
Unit
V
mV
mV
mA
mA
-1
mV/C
110
69
dB
IO = 1 A, TJ= +25C
f = 1 kHz
22
RO
Output
ISC
Short-Circuit Current
VI = 35 V, TA = +25C
250
mA
IPK
Peak Current(18)
TJ = +25C
2.2
Notes:
17. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
18. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
11
Refer to test circuit, -40C < TJ < 125C, IO = 500 mA, VI = 33 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
TJ = +25C
23.00
24.00
25.00
Output Voltage
5.0 mA IO 1.0 A, PO 15 W,
VI = 27 V to 38 V
22.80
24.00
25.25
Regline
Line Regulation(19)
TJ = +25C
Regload
Load Regulation(19)
TJ = +25C
IQ
Quiescent Current
IQ
Quiescent Current
Change
VO
VO/T
VN
Unit
V
VI = 27 V to 38 V
17
480
VI = 30 V to 36 V
240
IO = 5 mA to 1.5 A
15
480
IO = 250 mA to 750 mA
240
TJ = +25C
5.2
8.0
IO = 5 mA to 1.0 A
0.1
0.5
VI = 27 V to 38 V
0.5
1.0
IO = 5mA
-1.5
mV/C
120
RR
Ripple Rejection
VDrop
Dropout Voltage
(20)
Resistance(20)
f = 120 Hz, VI = 28 V to 38 V
50
mV
mV
mA
mA
67
dB
IO = 1 A, TJ= +25C
f = 1 kHz
28
RO
Output
ISC
Short-Circuit Current
VI = 35 V, TA= +25C
230
mA
IPK
Peak Current(20)
TJ = +25C
2.2
Notes:
19. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
20. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
12
Refer to the test circuit, 0C < TJ < +125C, Io = 1 A, VI = 10 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified.
Symbol
VO
Regline
Parameter
Output Voltage
Line Regulation
(21)
Conditions
Min.
Typ.
Max.
TJ =+25C
4.9
5.0
5.1
IO = 5 mA to 1 A, PO 15 W,
VI = 7.5 V to 20 V
4.8
5.0
5.2
VI = 7.5 V to 25 V, IO = 500 mA
5.0
50.0
VI = 8 V to 12 V
3.0
50.0
VI= 7.3 V to 20 V
5.0
50.0
VI= 8 V to 12 V
TJ = +25C
Regload
IQ
Load Regulation
(21)
Quiescent Current
1.5
25.0
TJ =+25C, IO = 5 mA to 1.5 A
100
IO = 5 mA to 1 A
100
IO = 250 mA to 750 mA
50
TJ = +25C
IO = 5 mA to 1 A
IQ
V/T
VN
RR
VDrop
Unit
V
mV
mV
mA
0.5
VI = 8 V to 25 V, IO = 500 mA
0.8
VI = 7.5 V to 20 V, TJ = +25C
0.8
mA
IO = 5 mA
-0.8
mV/C
42
Ripple Rejection(22)
68
dB
Dropout Voltage
IO = 1 A, TJ = +25C
RO
Output Resistance(22)
f = 1 kHz
17
ISC
Short-Circuit Current
VI = 35 V, TA = +25C
250
mA
TJ = +25C
2.2
IPK
Peak Current
(22)
Notes:
21. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
22. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
13
Refer to the test circuit, 0C < TJ < +125 C, IO = 1 A, VI = 15 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified.
Symbol
VO
Regline
Parameter
Output Voltage
Line Regulation
(23)
Conditions
Min.
Typ.
Max.
TJ = +25C
8.82
9.00
9.18
IO = 5 mA to 1 A, PO 15 W,
VI = 11.2 V to 24 V
8.65
9.00
9.35
VI = 11.7 V to 25 V, IO = 500 mA
90
VI = 12.5 V to 19 V
45
90
TJ = +25C
Regload
IQ
Load Regulation(23)
Quiescent Current
VI = 11.5 V to 24 V
45
TJ = +25C, IO = 5 mA to 1.0 A
VI = 12.5 V to 19 V
12
100
IO = 5 mA to 1.0 A
12
100
IO = 250 mA to 750 mA
50
TJ = +25C
VI = 11.7 V to 25 V, TJ = +25C
IQ
V/T
VN
RR
VDrop
Unit
V
mV
mV
mA
0.8
VI = 12 V to 25 V, IO = 500 mA
0.8
IO = 5 mA to 1.0 A
0.5
mA
IO = 5 mA
-1
mV/C
58
Ripple Rejection(24)
62
dB
Dropout Voltage
IO = 1 A, TJ = +25C
RO
Output Resistance(24)
f = 1 kHz
17
ISC
Short-Circuit Current
VI= 35 V, TA = +25C
250
mA
TJ = +25C
2.2
IPK
Peak Current
(24)
Notes:
23. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
24. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
14
Refer to the test circuit, 0C < TJ < +125 C, IO = 1 A, VI = 16 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified.
Symbol
VO
Regline
Parameter
Output Voltage
Line Regulation
(25)
Conditions
Min.
Typ.
Max.
TJ =+25C
9.8
10.0
10.2
IO = 5 mA to 1 A, PO 15 W,
VI = 12.8 V to 25 V
9.6
10.0
10.4
VI = 12.8 V to 26 V, IO = 500 mA
100
VI = 13 V to 20 V
50
100
TJ = +25C
Regload
IQ
Load Regulation(25)
Quiescent Current
VI = 12.5 V to 25 V
VI = 13 V to 20 V
50
TJ = +25C, IO = 5 mA to 1.5 A
12
100
IO = 5 mA to 1 mA
12
100
IO = 250 mA to 750 mA
50
TJ = +25C
IO = 5 mA to 1.0 A
IQ
V/T
VN
RR
VDrop
Unit
V
mV
mV
mA
0.5
VI = 12.8 V to 25 V, IO = 500 mA
0.8
VI = 13 V to 26 V, TJ = +25C
0.5
mA
IO = 5 mA
-1
mV/C
58
Ripple Rejection(26)
62
dB
Dropout Voltage
IO = 1 A, TJ = +25C
RO
Output Resistance(26)
f = 1 kHz
17
ISC
Short-Circuit Current
VI = 35 V, TA = +25C
250
mA
TJ = +25C
2.2
IPK
Peak Current
(26)
Notes:
25. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
26. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
15
Refer to the test circuit, 0C < TJ < +125C, IO = 1 A, VI = 19 V, CI= 0.33 F, CO = 0.1 F, unless otherwise specified.
Symbol
VO
Regline
Parameter
Output Voltage
Line Regulation(27)
Conditions
Min.
Typ.
Max.
TJ = +25C
11.75
12.00
12.25
IO = 5 mA to 1 A, PO 15 W,
VI = 14.8 V to 27 V
11.50
12.00
12.50
VI = 14.8 V to 30 V, IO = 500 mA
10
120
VI= 16 V to 22 V
120
10
120
TJ = +25C
Regload
Load Regulation(27)
VI= 14.5 V to 27 V
60
TJ = +25C, IO = 5 mA to 1.5 A
VI= 16 V to 22 V
12
100
IO = 5 mA to 1.0 A
12
100
IO = 250 mA to 750 mA
IQ
IQ
V/T
VN
RR
VDrop
Quiescent Current
Quiescent Current Change
Output Voltage Drift(28)
TJ = +25C
50
5.1
6.0
VI = 15 V to 30 V, TJ = +25C
0.8
VI = 14 V to 27 V, IO = 500 mA
0.8
IO = 5 mA to 1.0 A
0.5
Unit
V
mV
mV
mA
mA
IO = 5 mA
-1
mV/C
76
Ripple Rejection(28)
60
dB
Dropout Voltage
IO = 1 A, TJ = +25C
RO
Output Resistance(28)
f = 1 kHz
18
ISC
Short-Circuit Current
VI = 35 V, TA = +25C
250
mA
TJ = +25C
2.2
IPK
Peak Current
(28)
Notes:
27. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
28. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
16
Refer to the test circuit, 0C < TJ < +125C, IO = 1 A, VI = 23 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified.
Symbol
VO
Regline
Parameter
Output Voltage
Line Regulation
(29)
Conditions
Min.
Typ.
Max.
TJ = +25C
14.7
15.0
15.3
IO = 5 mA to 1 A, PO 15 W,
VI = 17.7 V to 30 V
14.4
15.0
15.6
VI = 17.9 V to 30 V, IO = 500 mA
10
150
VI = 20 V to 26 V
150
11
150
TJ = +25C
Regload
Load Regulation(29)
VI = 17.5 V to 30 V
75
TJ = +25C, IO = 5 mA to 1.5 A
VI = 20 V to 26 V
12
100
IO = 5 mA to 1.0 A
12
100
IO = 250 mA to 750 mA
IQ
IQ
V/T
VN
RR
VDrop
Quiescent Current
Quiescent Current Change
Output Voltage Drift(30)
TJ = +25C
50
5.2
6.0
VI = 17.5 V to 30 V, TJ = +25C
0.8
VI = 17.5 V to 30 V, IO = 500 mA
0.8
IO = 5 mA to 1.0 A
0.5
Unit
V
mV
mV
mA
mA
IO = 5 mA
-1
mV/C
90
Ripple Rejection(30)
58
dB
Dropout Voltage
IO = 1 A, TJ = +25C
RO
Output Resistance(30)
f = 1 kHz
19
ISC
Short-Circuit Current
VI = 35 V, TA = +25C
250
mA
TJ = +25C
2.2
IPK
Peak Current
(30)
Notes:
29. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
30. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
17
Refer to the test circuit, 0C < TJ < +125C, IO =1 A, VI = 33 V, CI = 0.33 F, CO = 0.1 F, unless otherwise specified.
Symbol
VO
Regline
Parameter
Output Voltage
Line Regulation
(31)
Conditions
Min.
Typ.
Max.
TJ = +25C
23.5
24.0
24.5
IO = 5 mA to 1 A, PO 15 W,
VI = 27.3 V to 38 V
23.0
24.0
25.0
VI = 27 V to 38 V, IO = 500 mA
18
240
VI = 21 V to 33 V
240
18
240
TJ = +25C
Regload
Load Regulation(31)
VI = 26.7 V to 38 V
120
TJ = +25C, IO = 5 mA to 1.5 A
VI = 30 V to 36 V
15
100
IO = 5 mA to 1.0 A
15
100
IO = 250 mA to 750 mA
IQ
Quiescent Current
TJ = +25C
50
5.2
6.0
VI = 27.3 V to 38 V, TJ = +25C
IQ
V/T
VN
RR
VDrop
Unit
V
mV
mV
mA
0.8
VI = 27.3 V to 38 V, IO = 500 mA
0.8
IO = 5 mA to 1.0 A
0.5
mA
IO = 5 mA
-1.5
mV/C
120
Ripple Rejection(32)
54
dB
Dropout Voltage
IO = 1 A, TJ = +25C
RO
Output Resistance(32)
f = 1 kHz
20
ISC
Short-Circuit Current
VI = 35 V, TA = +25C
250
mA
TJ = +25C
2.2
IPK
Peak Current
(32)
Notes:
31. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must
be taken into account separately. Pulse testing with low duty is used.
32. These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
18
5.75
VI = 10V
VO = 5V
IO = 5mA
5.5
5.25
5
4.75
2
1.5
1
.5
4.5
-50
-25
25
50
75
100
125
1.01
0.99
-25
25
50
75
100
10
15
20
25
30
35
TJ = 25C
VO = 5V
IO = 10mA
6.5
6
5.5
5
4.5
4
125
10
15
20
25
30
35
VI VO = 5V
IO = 5mA
0.98
-50
1.02
TJ = 25C
VO = 100mV
2.5
OUTPUT CURRENT (A)
www.fairchildsemi.com
19
KA78XXE
Input
Output
CO
CI
0.33 F
0.1 F
Figure 6. DC Parameters
KA78XXE
Input
Output
270 pF
RL
2N6121
OR EQ
0.33 F
VO
OV
30 S
VO
100
5.1
KA78XXE
Input
3
Output
0.33 F
RL
470 F
120 Hz
www.fairchildsemi.com
20
Typical Applications
KA78XXE
Input
Output
CO
CI
0.33F
0.1F
Input
CI
KA78XXE
CO
0.33 F
Output
0.1 F
Vxx
R1
IQ
IO
RL
Vxx
IO =
+
R1 IQ
Input
CI
CO
0.33 F
Output
KA78XXE
0.1 F
Vxx
R1
IQ
R2
I RI 5IQ
VO = VXX(1+R2/R1) + IQR2
Figure 11. Circuit for Increasing Output Voltage
www.fairchildsemi.com
21
Input
Output
KA7805E
2
CI
0.33F
CO
- 2
KA741
+ 3
4
0.1F
10K
IRI 5 IQ
VO = VXX(1+R2/R1) + IQR2
Figure 12. Adjustable Output Regulator (7 V to 30 V)
Input
VI
IQ1
R1
Output
KA78XXE
Vo
Io
IREG
0.33 F
0.1 F
Input
VI
Q2
R1
3
0.33 F
Q1 = TIP42
Q2 = TIP42
RSC =
KA78XXE
2
Vo
Output
0.1 F
VBEQ2
ISC
www.fairchildsemi.com
22
KA78XXE
VI
VO
0.33 F
0.1 F
COMMON
COMMON
KA741
+
-VIN
4.7 k
4.7 k
-VO
TIP42
Figure 15. Tracking Voltage Regulator
1
+20 V
KA7815E
2
3
+15 V
0.1 F
0.33 F
+ 2.2 F
1 F +
1N4001
-20 V
1N4001
KA7915E
-15 V
www.fairchildsemi.com
23
Output
Input
+
0.1 F
2
1
KA78XXE
D45H11
Input
1mH
Output
470
4.7
Z1
KA78XXE
0.33 F
10 F
0.5
2
+
2000 F
www.fairchildsemi.com
24
Physical Dimensions
www.fairchildsemi.com
25
0,1
)
0,1
)
&
0$;
0,1
0,1
/$1'3$77(515(&200(1'$7,21
)
%
)
)
0,1
)
6(('(7$,/$
%
)
*$*(3/$1(
)
127(681/(6627+(5:,6(63(&,),('
$127&203/,$1772-('(&729$5,$7,21$%
0$;
%$//',0(16,21$5(,10,//,0(7(5
&',0(16,216$5((;&/86,9(2)%855602/')/$6+
6($7,1*3/$1(
$1'7,(%$5(;7586,216
'/$'3$77(513(5,3&$$7$1'$5'
723;1
('5$:,1*),/(1$0(0.772'5(9
)'2(6127&203/<-('(&67$1'$5'9$/8(
*)$,5&+,/'6(0,&21'8&725
'(7$,/$
6&$/(
0,1
)
Figure 20. 3-LEAD, TO-252, NOT COMPLIANT TO JEDEC TO-252 VAR. AB, SURFACE MOUNT (DPAK)
www.fairchildsemi.com
26
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
F-PFS
FRFET
SM
Global Power Resource
GreenBridge
Green FPS
Green FPS e-Series
Gmax
GTO
IntelliMAX
ISOPLANAR
Making Small Speakers Sound Louder
and Better
MegaBuck
MICROCOUPLER
MicroFET
MicroPak
MicroPak2
MillerDrive
MotionMax
MotionGrid
MTi
MTx
MVN
mWSaver
OptoHiT
OPTOLOGIC
AccuPower
AttitudeEngine
Awinda
AX-CAP*
BitSiC
Build it Now
CorePLUS
CorePOWER
CROSSVOLT
CTL
Current Transfer Logic
DEUXPEED
Dual Cool
EcoSPARK
EfficientMax
ESBC
Fairchild
Fairchild Semiconductor
FACT Quiet Series
FACT
FAST
FastvCore
FETBench
FPS
OPTOPLANAR
PowerTrench
PowerXS
Programmable Active Droop
QFET
QS
Quiet Series
RapidConfigure
TinyBoost
TinyBuck
TinyCalc
TinyLogic
TINYOPTO
TinyPower
TinyPWM
TinyWire
TranSiC
TriFault Detect
TRUECURRENT*
SerDes
UHC
Ultra FRFET
UniFET
VCX
VisualMax
VoltagePlus
XS
Xsens
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I73
www.fairchildsemi.com