Académique Documents
Professionnel Documents
Culture Documents
= Even more Power with the Maxi | GRIP High Performance Power Clamping System
In order to be able to use the CENTRO | P clamping technology for extreme roughing and highly resistant materials as well, this simple but technically ingenious
clamping technology increases the holding torque of the CENTRO | P to 800 Nm
and more.
= The FAHRION SYNCHRO | T Tapping Chuck
By compensating the pitch differences or tolerances of the tap and the synchronous spindle, the machining results can be optimised while maintaining quality
and cost-effectiveness. A special tapping chuck with minimum length compensation is required for this. Weve got it the SYNCHRO | T!
Rely on tool clamping systems from FAHRION and obtain perfect results with
unbeatable cost-effectiveness.
Chuck
Holder
For all common spindle holder types.
= DIN 69871
SK
30 / 40 / 50
Version
The CENTRO | P Precision Collet Chuck is
available in two versions for different
collets. In addition there is an optimised
Tapping Chuck: the SYNCHRO | T.
GER
GOZ
= DIN 69893
HSK-F
63
= ISO 26623 - 1
C
4/5/6/8
GB
= JIS 6339
MAS / BT
30 / 40 / 50
= ANSI B5.50
CAT
40 / 50
= DIN 1835
Z
10 / 16 / 20 / 25 / 32
CENTRO | P
- for collets according to
DIN ISO 15488 - B (ER/ESX)
- very high concentricity of
3 m with FAHRION
GER-HP collets
CENTRO | P
- for collets according to
DIN ISO 10897 - B (OZ)
- extremely stable versions
with holding forces of
over 600 Nm with CP 432
- ideal for rough milling
Chuck Form
The chuck is classified into three basic forms. Different chuck
diameters and lengths give rise to 260 variants of the CENTRO | P.
A unique variety of possible applications. Mixed forms such as
Mini-Tapered and Tapered-Standard are possible.
MINI
TAPERED
STANDARD
SYNCHRO | T
- for tap collets similar
to DIN ISO 15488 - A with
internal square drive
- with minimum length
compensation
Collet
Clamping nut
Cooling
Suitable for all possible methods of
supplying cooling lubricant.
central (AD)
laterally via the collar (C)
minimum-quantity lubrication (MQL)
air cooling
peripheral cooling along the shaft by
means of larger sealing disc
Pull Stud
DIN 69872 Form A
Cooling lubricant
supply through
the centre
Form AD / BT
Pull Stud
DIN 69872 Form B
Cooling lubricant
supply via the
collar
Form B / BTB
GER-HP
Precision Collet 2 m
DIN ISO 15488 - B (ER/ESX)
Since the chuck body is supplied without clamping nuts, these must be ordered separately. You
have the choice between the standard version
and the version for sealing discs!
Technical Information
MQL
GER-HPD
Precision Collet 2 m
similar to DIN ISO 15488 - A
with seals for IC (inner coolant supply)
GER-HPDD
Precision Collet 2 m
similar to DIN ISO 15488 - A
with seals for IC (inner coolant
supply) and jet holes
G 2,5
GER-GBD
Tap Collet
similar to DIN ISO 15488 - A
with internal square drive and seals
for IC (inner coolant supply)
GER-GBDD
Tap Collet
similar to DIN ISO 15488 - A
with internal square drive, seals for
IC (inner coolant supply) and jet holes
GOZ-DG-HP
Precision Collet 3 m
DIN ISO 10897 - B
30.000 rpm
or U1gmm
G 2,5
25.000 rpm
or U1gmm
G 6,3
18.000 rpm
or U1gmm
G 6,3
12.000 rpm
or U1gmm
CENTRO | P
Standard balancing quality for
HSK DIN 69893 Form E and F
CENTRO | P
Standard balancing quality for
DIN 69871, HSK DIN 69893 / ISO 12164
Form A, polygonal, MAS/BT (JIS B 6339)
and CAT (ANSI B5.50)
SYNCHRO | T
Standard balancing quality for
HSK DIN 69893 / ISO 12164 Form A
SYNCHRO | T
Standard balancing quality for
DIN 69871 and MAS/BT (JIS B 6339)
Page
2
4
6
8
10
12
14
GB
Holder
Type
AD30
AD40-AD/B40
AD50-AD/B50
16
17
20
HSK-A32
HSK-A40
HSK-A50
HSK-A63
HSK-A80
HSK-A100
21
22
25
28
32
33
HSK-E25
HSK-E32
HSK-E40
HSK-E50
HSK-E63
HSK-F63
34
35
35
36
37
38
C4
C5
C6
C8
39
39
40
41
MAS/BT30 (AD)
41
MAS/BT40 (ADAD/B) 42
MAS/BT50 (ADAD/B) 46
CAT40 (AD/B)
CAT50 (AD/B)
47
49
Cylindrical Shanks
Z (AD)
50
A30 (AD)
51
GOZ
Page
GER
GOZ
GB
Page
59
60
60
61
62
62
Accessories
HPC Clamping Nuts
RO | DRO Roller Bearing Wrenches
DRMO Torque Setting Wrenches
TBRS Mounting Devices
DI | DIG Sealing Discs
BIS Data Carriers
AS-U | AS-W Adjustable Stop Screws
KW Taper Wipers
FH Flex-Hone Brushes
IKR | SCHL-IKR Coolant Supply Tubes and Wrenches
AZB Pull Studs
MAXI | GRIP High Performance Power Clamping System
52
57
58
58
63
63
64
65
65
66
67
70
Conversion Table
71
Ordering Example
71
7
precise.
Accuracy
Finishing
CENTRO | P
Pre-roughing
3xD
HSC roughing
Standard ER
collet chuck
HPC
roughing
Clamping Force
= Optimum Design
Due to well-thought-out chuck design,
we achieve maximum symmetry with
minimum residual imbalance.
Further design features are the ground
30 trapezoidal thread and the special
coating of the nut, which reduce
friction and, together with the double
guiding, ensure accurate centring of
the nut on the chuck.
powerful.
10
The CENTRO | P
More Powerful in Principle
0,0 mm
CENTRO | P
DIN collet sits
completely in the
holder:
FAHRION patent
300
225
2,0 mm
Approximate
competitors
solution
150
Standard ER
collet chuck
90
22
4,0 mm
Standard ER
collet chuck
12
16
20
Clamping
in mm
CENTRO | P
Perfect
clamping (recommended
for HPC)
Reduced
clamping
force
CENTRO | P
CENTRO | P
= High Rigidity
The reduction of bending and compressive forces creates an enormous
stability. This has been implemented in
the design of the CENTRO | P according
to the latest findings. The chuck body
is reinforced to the diameter of the
clamping nut, leading to maximum
rigidity and an optimum interference
contour.
= Strong and Insensitive
Even insensitivity is a strong point.
The CENTRO | P is resistant to temperature fluctuations and is fully suitable
for dry processes and hard milling up
to 200 C.
Hydraulic chuck
= Immense Stability
The special design of the CENTRO | P
achieves a better and more even distribution of the clamping forces over the
entire cylindrical surface of the tool
shank and the radial forces are optimally absorbed. So milling operations
produce perfect surfaces.
11
System Intelligence in
the Details, too
FAHRIONs most important principle has always been to keep things simple. For
us, a technical development only reaches full maturity when it is immediately
understandable and usually when it is amazingly simple.
And that is precisely what we have succeeded in doing with our precision collet
chucks. A precise collet chuck with a unique design and with a large range of
possible applications. Constructional intelligence is the basis for the entire system and the top series CENTRO | P represents the peak of simple perfection.
Intelligent Innovations
= Consistently innovative
Precision collet chucks by FAHRION
have been perfected over a period of
many years, making use of a great
deal of experience and benefit from
large investments in development. It is
often the smallest details that move us
forward and which ultimately provide
the technical advantage. For many
years, we have worked with our customers to turn practical requirements
into useful products.
= Environmental Protection
Sustainability is not just a question
of money, but also of conscientious
dealing with energy and resources.
Thanks to its perfect concentricity,
CENTRO | P reduces the power consumption of the spindle. Workpieces
can be machined in a shorter time,
12
= Simple Handling
FAHRION relies on simplicity where
handling is concerned, too. Despite
its many technical advantages, an
ingeniously simple, mechanical collet
chuck requires no peripheral devices.
It can be clamped simply, quickly,
and securely, using the roller bearing
wrench. The high purchase costs for
ancillary equipment can be dispensed
with.
= Variable Cooling
CENTRO | P is suitable for all methods
of cooling lubricant supply (central,
laterally via the collar, minimum quantity
lubrication, air cooling or peripheral
cooling along the tool shank).
Tool clearance
CENTRO | P
Tool clearance
conventional collet
chuck
intelligent.
= Universally Usable
The CENTRO | P is ideal for drilling,
countersinking, reaming, milling, for
HPC / HSC, and for tapping.
Drilling / Precision
Counter- reaming
sinking
Milling
Hard
milling
13
The machining of highly resistant materials such as stainless steel or titanium is increasingly in demand, placing
high demands on the holding torques of your tool clamping
systems. The newly developed Maxi | GRIP High Performance
Power Clamping System doubles the already high holding
torques of the CENTRO | P Precision Collet Chuck and thus
enables extreme rough machining. With the specially
developed and patented induction technology the range
of application of the CENTRO | P Precision Collet Chuck is
expanded, tool service lives are extended and top surface
qualities are achieved. The total system costs are thus
reduced.
14
SYNCHRO | T
The Perfectly Optimised Tapping Chuck
intelligent.
15
GER
MINI
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
CP11M-AD30-A=50
43213000500
CP11M-AD30-A=100
43213001000
Form
AD
16
A 1)
50
100
G
max.
G
min.
H
max.
H
min.
68
36
18
26
12
Clamping Range /
Collets
Clamping
Nuts
1,07,0
GER11-HP
HPC11M
HPC11M-DI
Accessories: Clamping Nuts pages 52, 53, Wrenches page 57, Mounting Devices page 58, Precision Collets page 59, Stop Screws page 64, Taper Wipers page 65,
Flex-Hone Brushes page 65, Pull Studs page 67
E
A
GER
STANDARD
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
Form
A 1)
44313000500
CP16-AD30-A=100
44313001000
CP25-AD30-A=70
44513000700
CP32-AD30-A=70
44613000700
30
AD
G
min.
H
max.
H
min.
45
28
31
16
1,010,0
GER16-HP/HPD/GBD
HPC16
HPC16-DI
66
49
35
31
18
1,016,0
GER25-HP/HPD/GBD
HPC25
HPC25-DI
75
56
45
40
29
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
50
75
100
125
40
70
50
Clamping
Nuts
G
max.
E
CP16-AD30-A=50
Clamping Range /
Collets
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs page 67
1)
16
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on pages 52 and 54
GER
E
G
MINI
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
Form
A 1)
G
max.
G
min.
H
max.
H
min.
CP11M-B40-A=70
43214000700
70
60
32
15
22
CP11M-B40-A=100
43214001000
100
68
36
18
26
12
CP11M-B40-A=130
43214001300
130
110
32
15
22
CP11M-B40-A=160
43214001600
160
68
36
18
26
12
CP16M-B40-A=70
43314000700
70
90
CP16M-B40-A=100
43314001000
100
110
CP16M-B40-A=130
43314001300
130
140
50
28
36
14
CP16M-B40-A=160
43314001600
160
170
16
AD/B
24
Clamping Range /
Collets
Clamping
Nuts
1,07,0
GER11-HP
HPC11M
HPC11M-DI
1,010,0
GER16-HP/HPD/GBD
HPC16MS
HPC16MS-DI
Accessories: Clamping Nuts pages 52, 53, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 67, 68
GER
E
G
TAPERED
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
Form
A 1)
CPC16-B40-A=100
44314401000
CPC16-B40-A=160
44314401600
AD/B
24
100
4,5
140
160
2,5
200
G
max.
G
min.
H
max.
H
min.
48
28
35
20
Clamping
Range /
Collets
Clamping
Nuts
1,010,0
GER16-HP/
HPD/GBD
HPC16C
HPC16C-DI
Accessories: Clamping Nuts page 53, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 67, 68
1)
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on pages 52 and 53
17
GER
STANDARD
05.09.2011 - K:\SW-AWU\Modelle\CP-Futter\Zusammenstellungen\CP32\Katalogzeichn\44614000700-K
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
Form
Kanten 0,3x45
gebrochen
1)
Passma
E
CP16-AD40-A=70
44315000700
AD
CP16-B40-A=70
44314000700
AD/B
CP16-AD40-A=100
44315001000
AD
CP16-B40-A=100
44314001000
CP16-B40-A=130
44314001300
130
CP16-B40-A=160
44314001600
160
200
CP16-B40-A=200
44314002000
200
240
CP20-B40-A=70
44414000700
70
100
CP20-B40-A=130
44414001300
130
160
CP25-B40-A=45
44514000450
45
85
CP25-AD40-A=70
44515000700
AD
CP25-B40-A=70
44514000700
AD/B
70
110
CP25-AD40-A=100
44515001000
CP25-B40-A=100
44514001000
100
113
CP25-B40-A=130
44514001300
130
140
CP25-B40-A=160
44514001600
160
118
CP25-B40-A=200
44514002000
200
148
CP32-AD40-A=50
44615000500
AD
CP32-B40-A=50
44614000500
AD/B
50
CP32-AD40-A=70
44615000700
AD
CP32-B40-A=70
44614000700
AD/B
70
CP32-AD40-A=100
44615001000
AD
CP32-B40-A=100
44614001000
CP32-B40-A=130
44614001300
CP32-B40-A=160
44614001600
CP40-AD40-A=70
44715000700
2)
CP40-AD40-A=100
2)
44715001000
70
Abma
10-30
0,1 Gez.
30-80
80-180
0,2 Gepr.
Gen.
0,3
180-500
0,5
500-1000
1,0
Datum:
G
max.
Name:
AD/B
32
40
AD/B
100
Mastab:
Wrmebehandlung:
Gewicht:
verg. auf:
angelassen auf:
Einsatztiefe:
Artikel-Bez. 2:
G
min.
H
max.
H
min.
31
16
28
140
50
34
14
45
31
16
48
31
60
35
42
20
67
38
49
21
60
35
42
20
85
70
52
52
26
111
75
55
62
42
70
52
52
32
42
55
28
48
50
100
AD/B
94
130
63
Clamping
Nuts
110
45
30
AD
zul.Abweichg.n. Werkstoff:
tol.bearb.Mae:
Rohteil
-10
0,06 Nr.
74
160
135
70
70
105
55
100
120
62
1,010,0
GER16-HP/HPD/GBD
HPC16
HPC16-DI
1,013,0
GER20-HP/HPD/GBD
HPC20
HPC20-DI
1,016,0
GER25-HP/HPD/GBD
HPC25
HPC25-DI
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
3,026,0
GER40-HP/HPD/GBD
HPC40
HPC40-DI
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 67, 68
1)
2)
18
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1 under Clamping Nuts on page 54
Without clearance to DIN 69871 in front of the tool change flange
GOZ
STANDARD
G 2,5
25.000 rpm
or U1gmm
Description
CP225DG-B40-A=40
Order-No.
48414000400
Form
AD/B
50
A 1)
40
F 2)
G
max.
G
min.
H
max.
H
min.
80
59
65
53
48
37
Clamping Range /
Collets
Clamping
Nuts
2,025,0
FM25DGHP
HPC225
HPC225-DIG
Accessories: Clamping Nuts page 55, Wrenches page 57, Mounting Devices page 58, Precision Collets page 62, Sealing Discs page 63, Stop Screws page 64,
Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 67, 68
GB
G 6,3
12.000 rpm
or U1gmm
SYNCHRO | T
Tap insertion depth T
Description
Order-No.
Form
ST16-GB-B40-A=79
52314000790
30
79
ST20-GB-B40-A=80
52414000800
32
80
ST25-GB-B40-A=84
52514000840
40
84
ST32-GB-B40-A=95
52614000950
50
95
ST40-GB-B40-A=120
52714001200
63
120
AD/B
Shank-
2,8 7,1
Shank-
89
Shank-
10 16
Shank-
18 25
18
22
25
Cutting range
Collets
M3M12
GER16-GBD
M3M16
GER20-GBD
M3M20
GER25-GBD
30
M4M27
GER32-GBD
33
M4M33
GER40-GBD
Accessories: Wrenches page 57, Mounting Devices page 58, Tap Collets pages 61, 62, Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 67, 68
1)
2)
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on page 55
Dimension E is for tool shanks 20 mm and dimension F is for tool shanks > 20 mm
19
E
A
Order-No.
Form
Kanten 0,3x45
gebrochen
Passma
A 1)
Abma
1,0
Ho
Mastab:
1:1
1:2
Spannzangenfutter
CP32-B50-A=70
Wrmebehandlung:
Gewicht:
verg. auf:
angelassen auf:
Einsatztiefe:
Artikel-Bez. 2:
Artikel-Nr.:
44616000700
FAHRION
..
45
130
160
190
70
120
100
150
44317001600
44517000700
CP25-AD50-A=100
44517001000
CP25-AD50-A=160
44517001600
160
200
CP32-B50-A=70
44616000700
70
CP32-B50-A=100
44616001000
100
CP32-B50-A=160
44616001600
CP40-AD50-A=70
44717000700
CP40-AD50-A=100
44717001000
63
0,5
Name:
100
CP25-AD50-A=70
AD
180-500
500-1000
Datum:
04.07.05.
100
CP16-AD50-A=160
50
30-80
80-180
0,2 Gepr.
Gen.
0,3
70
44317001000
40
0,1 Gez.
G
max.
44317000700
AD
10-30
CP16-AD50-A=100
30
zul.Abweichg.n. Werkstoff:
tol.bearb.Mae:
Rohteil
-10
0,06 Nr.
CP16-AD50-A=70
AD/B
G 2,5
25.000rpm
or U1gmm
Description
STANDARD
07.09.2011 - K:\SW-AWU\Modelle\CP-Futter\Zusammenstellungen\CP32\CP-Katalog\44616000700-K
G
min.
H
max.
Clamping Range /
Collets
Clamping
Nuts
16
1,010,0
GER16-HP/HPD/GBD
HPC16
HPC16-DI
1,016,0
GER25-HP/HPD/GBD
HPC25
HPC25-DI
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
3,026,0
GER40-HP/HPD/GBD
HPC40
HPC40-DI
H
min.
35
28
55
41
64
35
48
20
120
85
59
70
40
150
81
160
200
83
70
120
60
100
150
70
63
53
35
65
48
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61,62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 67, 68
GOZ
Order-No.
Form
Werkstoff:
Rohteil
Nr.
Gez.
48416000500
CP432DG-B50-A=50
48716000500
Ca
1:1
1:2
A 1)
Wrmebehandlung:
Gewicht:
verg. auf:
angelassen auf:
Einsatztiefe:
Mastab:
Spannzangenfutter
CP225DG-B50-A=50
50
63
Name:
Gen.
Artikel-Bez. 2:
Artikel-Nr.:
48416000500
50
AD/B
Datum:
06.09.11
Gepr.
E
CP225DG-B50-A=50
Clamping Range /
Collets
Clamping
Nuts
G
max.
G
min.
H
max.
H
min.
66
55
2,025,0
FM25DGHP
HPC225
HPC225-DIG
70
62
4,032,0
FM32DG
HPC432
HPC432-DIG
110
Accessories: Clamping Nuts page 55, Wrenches page 57, Mounting Devices page 58, Precision Collets page 62, Sealing Discs page 63, Stop Screws page 64,
Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 67, 68
1)
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on pages 54 and 55
20
G 2,5
25.000 rpm
or U1gmm
Description
STANDARD
07.09.2011 - K:\SW-AWU\Modelle\CP-Futter\Zusammenstellungen\CP225DG\Katalog\48416000500-K
G 6,3
GB
12.000 rpm
or U1gmm
SYNCHRO | T
Tap insertion depth T
Description
Order-No.
Form
ST16-GB-B50-A=79
52316000790
30
79
ST20-GB-B50-A=80
52416000800
32
80
ST25-GB-B50-A=84
52516000840
40
84
ST32-GB-B50-A=95
52616000950
50
95
ST40-GB-B50-A=105
52716001050
63
105
AD/B
Shank-
2,8 7,1
Shank-
89
Shank-
10 16
Shank-
18 25
18
22
25
Cutting range
Collets
M3M12
GER16-GBD
M3M16
GER20-GBD
M3M20
GER25-GBD
30
M4M27
GER32-GBD
33
M4M33
GER40-GBD
Accessories: Wrenches page 57, Mounting Devices page 58, Tap Collets pages 61, 62, Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 67, 68
A
E
GER
M Q L 1)
MINI
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
Form
A 2)
CP11M-HSK-A32-A=403)
43223000400
CP16M-HSK-A32-A=503)
43323000500
CP16M-HSK-A32-A=100
43323001000
16
A
24
40
24
50
32
100
67
G
max.
G
min.
44
H
max.
30
Clamping
Nuts
1,07,0
GER11-HP
HPC11M
HPC11M-DI
1,010,0
GER16-HP/HPD/GBD
HPC16MS
HPC16MS-DI
H
min.
27
Clamping Range /
Collets
14
Accessories: Clamping Nuts pages 52, 53, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
1)
2)
3)
21
A
E
GER
M Q L 1)
STANDARD
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
CP20-HSK-A32-A=503)
44423000500
Form
32
A 2)
50
G
max.
G
min.
H
max.
H
min.
35
Clamping Range /
Collets
Clamping
Nuts
1,013,0
GER20-HP/HPD/GBD
HPC20
HPC20-DI
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GER
MINI
M Q L 1)
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
CP11M-HSK-A40-A=60
43224000600
CP11M-HSK-A40-A=130
43224001300
Form
16
A 2)
G
max.
60
40
24
130
75
32
G
min.
16
H
max.
H
min.
22
Clamping Range /
Collets
Clamping
Nuts
1,07,0
GER11-HP
HPC11M
HPC11M-DI
Accessories: Clamping Nuts page 52, Wrenches page 57, Mounting Devices page 58, Precision Collets page 59, Stop Screws page 64, Taper Wipers page 65,
Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
1)
2)
3)
22
GER
MINI
TAPERED
M Q L 1)
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
CPC11M-HSK-A40-A=100
43224401000
Form
16
A 2)
100
4,5
G
max.
G
min.
H
max.
H
min.
65
34
15
25
Clamping
Range /
Collets
Clamping
Nuts
1,07,0
GER11-HP
HPC11M
HPC11M-DI
Accessories: Clamping Nuts page 52, Wrenches page 57, Mounting Devices page 58, Precision Collets page 59, Stop Screws page 64, Taper Wipers page 65,
Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GER
E
G
TAPERED
M Q L 1)
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
CPC16-HSK-A40-A=60
44324400600
CPC16-HSK-A40-A=100
44324401000
Form
24
A 2)
60
100
G
max.
43
30
67
47
G
min.
26
H
max.
H
min.
32
12
Clamping
Range /
Collets
Clamping
Nuts
1,010,0
GER16-HP/
HPD/GBD
HPC16C
HPC16C-DI
Accessories: Clamping Nuts page 53, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
1)
2)
23
Description
CP16-HSK-A40-A=60
A
E
GER
M Q L 1)
30.08.2011 - K:\SW-AWU\Modelle\CP-Futter\Zusammenstellungen\CP16u.CP16M\CP16\CP-Katalog\44324000600-K
G 2,5
25.000 rpm
or U1gmm
Order-No.
Form
A 2)
Kanten 0,3x45
gebrochen
E
44324000600
CP25-HSK-A40-A=603)
44524000600
CP25-HSK-A40-A=100
44524001000
CP32-HSK-A40-A=613)
44624000610
30
A
60
Passma
50
61
100
Abma
0,06
Rohteil
Nr.
0,1 Gez.
30-80
0,2 Gepr.
Gen.
0,3
4080-180
60
40
-10
10-30
180-500
0,5
500-1000
1,0
76
G
max.
G
H verg. auf:H
Einsatztiefe:
min. Mastab:
max. min.
Datum:
Name:
16.05.08
Ho
32
1:1
28
Spannzangenfutter
CP16-HSK-A40-A=60
-
45
Clamping
Nuts
angelassen auf:
Artikel-Bez. 2:
1,010,0
Artikel-Nr.:
HPC16
HPC16-DI
GER16-HP/HPD/GBD
44324000600
1,016,0
FAHRION
GER25-HP/HPD/GBD
HPC25
HPC25-DI
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
54
32
36
20
..
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GB
A
T
M Q L 1)
G 6,3
18.000 rpm
or U1gmm
SYNCHRO | T
Tap insertion depth T
Description
Order-No.
ST16-GB-HSK-A40-A=87
52324000870
ST20-GB-HSK-A40-A=88
52424000880
Form
30
87
32
88
Shank-
2,8 7,1
Shank-
89
18
22
Shank-
10 16
25
Shank-
18 25
-
Cutting range
Collets
M3M12
GER16-GBD
M3M16
GER20-GBD
Accessories: Wrenches page 57, Mounting Devices page 58, Tap Collets pages 61, 62, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and
Wrenches page 66
1)
2)
3)
24
GER
MINI
M Q L 1)
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
CP11M-HSK-A50-A=130
43225001300
Form
16
A 2)
130
G
max.
G
min.
H
max.
H
min.
60
32
15
22
Clamping Range /
Collets
Clamping
Nuts
1,07,0
GER11-HP
HPC11M
HPC11M-DI
Accessories: Clamping Nuts page 52, Wrenches page 57, Mounting Devices page 58, Precision Collets page 59, Stop Screws page 64, Taper Wipers page 65,
Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GER
MINI
TAPERED
M Q L 1)
G 2,5
25.000 rpm
or U1gmm
Description
CPC11M-HSK-A50-A=100
Order-No.
43225401000
Form
16
A 2)
100
4,5
G
max.
G
min.
H
max.
H
min.
65
34
15
25
Clamping
Range /
Collets
Clamping
Nuts
1,07,0
GER11-HP
HPC11M
HPC11M-DI
Accessories: Clamping Nuts page 52, Wrenches page 57, Mounting Devices page 58, Precision Collets page 59, Stop Screws page 64, Taper Wipers page 65,
Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
1)
2)
25
A
E
GER
TAPERED
M Q L 1)
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
CPC16-HSK-A50-A=65
44325400650
CPC16-HSK-A50-A=100
44325401000
CPC16-HSK-A50-A=130
44325401300
Form
A 2)
65
A
24
100
4,5
130
G
max.
44
32
77
38
102
G
min.
28
H
max.
H
min.
36
14
Clamping
Range /
Collets
Clamping
Nuts
1,010,0
GER16-HP/
HPD/GBD
HPC16C
HPC16C-DI
Accessories: Clamping Nuts page 53, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64 , Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GER
M Q L 1)
STANDARD
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
CP25-HSK-A50-A=60 3
44525000600
CP25-HSK-A50-A=70
44525000700
CP25-HSK-A50-A=100
44525001000
CP32-HSK-A50-A=70
44625000700
Form
40
A
50
A 2)
G
max.
G
min.
H
max.
H
min.
60
37
70
49
35
100
75
53
35
20
70
47
34
-
Clamping Range /
Collets
Clamping
Nuts
1,016,0
GER25-HP/HPD/GBD
HPC25
HPC25-DI
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
1)
2)
3)
26
M Q L 1)
G 6,3
18.000 rpm
or U1gmm
SYNCHRO | T
Tap insertion depth T
Description
Order-No.
Form
ST16-GB-HSK-A50-A=87
52325000870
30
87
ST20-GB-HSK-A50-A=88
52425000880
32
88
ST25-GB-HSK-A50-A=92
52525000920
40
92
ST32-GB-HSK-A50-A=116
52625001160
50
116
Shank-
2,8 7,1
Shank-
89
Shank-
10 16
Shank-
18 25
18
22
25
30
Cutting range
Collets
M3M12
GER16-GBD
M3M16
GER20-GBD
M3M20
GER25-GBD
M4M27
GER32-GBD
Accessories: Wrenches page 57, Mounting Devices page 58, Tap Collets pages 61, 62, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and
Wrenches page 66
27
MINI
E
G
M Q L 1)
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
Form
A 2)
G
max.
G
min.
H
max.
H
min.
CP11M-HSK-A63-A=70
43226000700
70
48
32
15
22
CP11M-HSK-A63-A=100
43226001000
100
68
36
18
26
12
CP11M-HSK-A63-A=130
43226001300
130
108
32
15
22
CP11M-HSK-A63-A=160
43226001600
160
135
36
18
26
12
CP16M-HSK-A63-A=70
43326000700
70
46
34
CP16M-HSK-A63-A=100
43326001000
100
62
44
CP16M-HSK-A63-A=130
43326001300
130
87
CP16M-HSK-A63-A=160
43326001600
160
97
16
A
24
Clamping Range /
Collets
Clamping
Nuts
1,07,0
GER11-HP
HPC11M
HPC11M-DI
1,010,0
GER16-HP/HPD/GBD
HPC16MS
HPC16MS-DI
20
27
52
30
14
38
Accessories: Clamping Nuts pages 52, 53, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GER
TAPERED
M Q L 1)
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
Form
A 2)
CPC16-HSK-A63-A=100
44326401000
CPC16-HSK-A63-A=160
44326401600
24
100
4,5
74
160
2,5
106
G
max.
G
min.
H
max.
H
min.
48
28
35
20
Clamping
Range /
Collets
Clamping
Nuts
1,010,0
GER16-HP/
HPD/GBD
HPC16C
HPC16C-DI
Accessories: Clamping Nuts page 53, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
1)
2)
28
GER
STANDARD
M Q L 1)
06.09.2011 - K:\SW-AWU\Modelle\CP-Futter\Zusammenstellungen\CP32\CP-Katalog\44626001000-K
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
Form
Kanten 0,3x45
gebrochen
2)
zul.Abweichg.n. Werkstoff:
tol.bearb.Mae:
Rohteil
-10
0,06 Nr.
Wrmebehandlung:
Passma
Abma
10-30
0,1 Gez.
30-80
80-180
0,2 Gepr.
Gen.
0,3
180-500
0,5
500-1000
1,0
verg. auf:
Name:
Datum:
Mastab:
Artikel-Bez. 2:
G
max.
G
min.
H
max.
H
min.
44326000550
55
32
CP16-HSK-A63-A=100
44326001000
100
71
45
28
31
16
CP16-HSK-A63-A=130
44326001300
130
87
50
26
38
17
CP16-HSK-A63-A=160
44326001600
160
106
CP16-HSK-A63-A=200
44326002000
200
136
45
28
31
16
3)
CP20-HSK-A63-A=60
44426000600
60
35
CP20-HSK-A63-A=100
44426001000
100
70
38
31
CP25-HSK-A63-A=603)
44526000600
60
37
CP25-HSK-A63-A=100
44526001000
100
70
55
35
37
24
CP25-HSK-A63-A=130
44526001300
130
89
60
37
42
12
CP25-HSK-A63-A=160
44526001600
160
128
CP25-HSK-A63-A=200
44526002000
200
148
60
35
42
24
CP32-HSK-A63-A=70
3)
44626000700
70
46
CP32-HSK-A63-A=100
44626001000
100
71
57
41
39
26
CP32-HSK-A63-A=130
44626001300
130
101
69
42
41
18
60
26
32
40
50
CP32-HSK-A63-A=160
44626001600
160
129
70
52
CP40-HSK-A63-A=803)4)
44726000800
80
56
CP40-HSK-A63-A=1604)
44726001600
160
130
75
48
63
1234 g
angelassen auf:
Einsatztiefe:
CP16-HSK-A63-A=553)
30
Gewicht:
Clamping
Nuts
1,010,0
GER16-HP/HPD/GBD
HPC16
HPC16-DI
1,010,0
GER20-HP/HPD/GBD
HPC20
HPC20-DI
1,016,0
GER25-HP/HPD/GBD
HPC25
HPC25-DI
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
3,026,0
GER40-HP/HPD/GBD
HPC40
HPC40-DI
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
1)
2)
3)
4)
29
GER
TAPERED
STANDARD
M Q L 1)
G 2,5
25.000 rpm
or U1gmm
Description
CPC32-HSK-A63-A=753)
Order-No.
44626400750
Form
50
A 2)
75
G
max.
G
min.
H
max.
H
min.
51
Clamping
Range /
Collets
Clamping
Nuts
2,020,0
GER32-HP/
HPD/GBD
HPC32
HPC32-DI
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GOZ
TAPERED
STANDARD
M Q L 1)
G 2,5
25.000 rpm
or U1gmm
Description
CPC225DG-HSK-A63A=853)
Order-No.
48426400850
Form
50
A 2)
85
2,5
G
max.
G
min.
H
max.
H
min.
60
Clamping
Range /
Collets
Clamping
Nuts
2,025,0
FM25DGHP
HPC225
HPC225-DIG
Accessories: Clamping Nuts page 55, Wrenches page 57, Mounting Devices page 58, Precision Collets page 62, Sealing Discs page 63, Taper Wipers page 65,
Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
1)
2)
3)
30
GOZ
M Q L 1)
STANDARD
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
CP432DG-HSK-A63-A=903)
48726000900
Form
63
A 2)
90
G
max.
G
min.
H
max.
H
min.
67
Clamping Range /
Collets
Clamping
Nuts
4,032,0
FM32DG
HPC432
HPC432-DIG
Accessories: Clamping Nuts page 55, Wrenches page 57, Mounting Devices page 58, Precision Collets page 62, Sealing Discs page 63, Taper Wipers page 65,
Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GB
M Q L 1)
G 6,3
18.000 rpm
or U1gmm
SYNCHRO | T
Tap insertion depth T
Description
Order-No.
Form
ST16-GB-HSK-A63-A=89
52326000890
30
89
ST20-GB-HSK-A63-A=90
52426000900
32
90
ST25-GB-HSK-A63-A=94
52526000940
40
94
ST32-GB-HSK-A63-A=105
52626001050
50
105
ST40-GB-HSK-A63-A=134
52726001340
63
134
Shank-
2,8 7,1
Shank-
89
Shank-
10 16
Cutting range
Collets
M3M12
GER16-GBD
M3M16
GER20-GBD
M3M20
GER25-GBD
30
M4M27
GER32-GBD
33
M4M33
GER40-GBD
Shank-
18 25
18
22
25
Accessories: Wrenches page 57, Mounting Devices page 58, Tap Collets pages 61, 62, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and
Wrenches page 66
1)
2)
3)
31
A
E
STANDARD
M Q L 1)
06.09.2011 - K:\SW-AWU\Modelle\CP-Futter\Zusammenstellungen\CP32\CP-Katalog\44627001000-K
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
CP32-HSK-A80-A=100
44627001000
CP40-HSK-A80-A=120
44727001200
Form
Kanten 0,3x45
gebrochen
A 2)
10-30
0,1 Gez.
30-80
Datum:
Name:
31.08.11
Ca
Mastab:
1:1
Wrmebehandlung:
Gewicht:
verg. auf:
angelassen auf:
Einsatztiefe:
Artikel-Bez. 2:
zul.Abweichg.n. Werkstoff:
tol.bearb.Mae:
Rohteil
-10
0,06 Nr.
Abma
80-180
0,2 Gepr.
Gen.
0,3
180-500
0,5
500-1000
1,0
1:2
Artikel-Nr.:
..
G
max.
G
min.
50
100
70
55
48
63
120
86
54
35
H
max.
Clamping Range /
Collets
Clamping
Nuts
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
3,026,0
GER40-HP/HPD/GBD
HPC40
HPC40-DI
H
min.
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GB
A
T
M Q L 1)
G 6,3
18.000 rpm
or U1gmm
SYNCHRO | T
Tap insertion depth T
Description
Order-No.
ST32-GB-HSK-A80-A=111
52627001110
ST40-GB-HSK-A80-A=131
52727001310
Form
50
111
63
131
Shank-
2,8 7,1
Shank-
89
Shank-
10 16
18
22
25
Shank-
18 25
Cutting range
Collets
30
M4M27
GER32-GBD
33
M4M33
GER40-GBD
Accessories: Wrenches page 57, Mounting Devices page 58, Tap Collets pages 61, 62, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and
Wrenches page 66
1)
2)
32
A
E
STANDARD
Order-No.
Form
Kanten 0,3x45
gebrochen
Passma
A 2)
Abma
zul.Abweichg.n. Werkstoff:
tol.bearb.Mae:
Rohteil
-10
0,06 Nr.
10-30
0,1 Gez.
30-80
Datum:
Name:
31.08.11
Ca
80-180
0,2 Gepr.
Gen.
0,3 Benennung:
180-500
0,5
500-1000
1,0
44328001000
CP16-HSK-A100-A=160
44328001600
CP25-HSK-A100-A=100
44528001000
CP25-HSK-A100-A=160
44528001600
CP32-HSK-A100-A=100
44628001000
CP32-HSK-A100-A=160
44628001600
CP32-HSK-A100-A=200
44628002000
CP40-HSK-A100-A=100
44728001000
3)
30
40
A
50
63
Mastab:
1:1
1:2
Spannzangenfutter
CP32-HSK-A100-A=100
Wrmebehandlung:
Gewicht:
verg. auf:
angelassen auf:
2.58 g
Einsatztiefe:
Artikel-Bez. 2:
Artikel-Nr.:
44628001000
FAHRION
..
CP16-HSK-A100-A=100
G 2,5
25.000 rpm
or U1gmm
Description
M Q L 1)
06.09.2011 - K:\SW-AWU\Modelle\CP-Futter\Zusammenstellungen\CP32\CP-Katalog\44628001000-K
Clamping Range /
Collets
Clamping
Nuts
G
max.
G
min.
H
max.
H
min.
48
28
35
16
1,010,0
GER16-HP/HPD/GBD
HPC16
HPC16-DI
20
1,016,0
GER25-HP/HPD/GBD
HPC25
HPC25-DI
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
3,026,0
GER40-HP/HPD/GBD
HPC40
HPC40-DI
100
70
160
130
100
71
56
160
105
68
100
70
59
160
99
70
200
150
72
43
54
28
100
65
40
38
50
40
42
52
24
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GOZ
TAPERED
STANDARD
Kanten 0,3x45
gebrochen
zul.Abweichg.n. Werkstoff:
tol.bearb.Mae:
Rohteil
-10
0,06 Nr.
Description
Order-No.
Form
Passma
A 2)
48428400900
CPC432DG-HSK-A100A=1003)
48728401000
Abma
10-30
0,1 Gez.
30-80
80-180
0,2 Gepr.
Gen.
0,3
180-500
0,5
500-1000
1,0
Datum:
Name:
31.08.11
Ca
Mastab:
1:1
Wrmebehandlung:
Gewicht:
verg. auf:
angelassen auf:
50
90
60
63
100
69
G 2,5
25.000 rpm
or U1gmm
Einsatztiefe:
Artikel-Bez. 2:
Artikel-Nr.:
Spannzangenfutter
CPC432DG-HSK-A100-A=100
48728401000
FAHRION
PRAZISION
..
CPC225DG-HSK-A100A=903)
M Q L 1)
12.09.2011 - K:\SW-AWU\Modelle\CPC-Futter\Zusammenstellungen\CPC432DG\Katalog\48728401000-K
G
max.
G
min.
H
max.
Clamping Range /
Collets
Clamping
Nuts
2,025,0
FM25DGHP
HPC225
HPC225-DIG
4,032,0
FM32DG
HPC432
HPC432-DIG
H
min.
Accessories: Clamping Nuts page 55, Wrenches page 57, Mounting Devices page 58, Precision Collets page 62, Sealing Discs page 63, Taper Wipers page 65,
Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
1)
2)
33
A
T
M Q L 1)
G 6,3
18.000 rpm
or U1gmm
SYNCHRO | T
Tap insertion depth T
Description
Order-No.
Form
ST16-GB-HSK-A100-A=95
52328000950
30
95
ST20-GB-HSK-A100-A=97
52428000970
32
97
ST25-GB-HSK-A100-A=101
52528001010
40
101
ST32-GB-HSK-A100-A=110
52628001100
50
110
ST40-GB-HSK-A100-A=133
52728001330
63
133
Shank-
2,8 7,1
Shank-
89
Shank-
10 16
Cutting range
Collets
M3M12
GER16-GBD
M3M16
GER20-GBD
M3M20
GER25-GBD
30
M4M27
GER32-GBD
33
M4M33
GER40-GBD
Shank-
18 25
18
22
25
Accessories: Wrenches page 57, Mounting Devices page 58, Tap Collets pages 61, 62, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and
Wrenches page 66
GER
MINI
TAPERED
M Q L 1)
G 2,5
30.000 rpm
or U1gmm
Description
Order-No.
Form
A 2)
CPC8M-HSK-E25-A=353)
43142000350
10
16
2,5
22
30
G
max.
G
min.
H
max.
H
min.
35
CPC11M-HSK-E25-A=353)
43242000350
CPC16M-HSK-E25-A=453)
43342000450
16
22
45
Clamping
Range /
Collets
Clamping
Nuts
1,05,0
GER8-HP
HPC8M
1,07,0
GER11-HP
HPC11M
HPC11M-DI
1,010,0
GER16-HP/
HPD/GBD
HPC16MS
HPC16MS-DI
Accessories: Clamping Nuts pages 52, 53, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
1)
2)
3)
34
GER
MINI
TAPERED
M Q L 1)
G 2,5
30.000 rpm
or U1gmm
Description
Order-No.
CP8M-HSK-E32-A=503)
Form
43143000500
A 2)
10
G
max.
G
min.
30
50
CPC11M-HSK-E32-A=50
43243000500
CPC16M-HSK-E32-A=55
43343000550
16
31
20
18
40
32
28
H
max.
H
min.
22
12
4,5
22
55
Clamping
Range /
Collets
Clamping
Nuts
1,05,0
GER8-HP
HPC8M
1,07,0
GER11-HP
HPC11M
HPC11M-DI
1,010,0
GER16-HP/
HPD/GBD
HPC16MS
HPC16MS-DI
Accessories: Clamping Nuts pages 52, 53, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GER
MINI
TAPERED
G
M Q L 1)
G 2,5
30.000 rpm
or U1gmm
Description
Order-No.
CPC11M-HSK-E40-A=50
43244000500
CPC11M-HSK-E40-A=100
43244001000
CPC16M-HSK-E40-A=55
43344000550
CPC16M-HSK-E40-A=100
43344001000
Form
16
E
22
A 2)
50
100
4,5
55
100
2,5
G
max.
31
20
64
36
38
30
66
48
G
min.
18
28
H
max.
H
min.
26
20
38
12
Clamping
Range /
Collets
Clamping
Nuts
1,07,0
GER11-HP
HPC11M
HPC11M-DI
1,010,0
GER16-HP/
HPD/GBD
HPC16MS
HPC16MS-DI
Accessories: Clamping Nuts pages 52, 53, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
1)
2)
3)
35
GER
M Q L 1)
12.09.2011 - K:\SW-AWU\Modelle\CP-Futter\Zusammenstellungen\CP25\CP-Katalog\44544000600-K
STANDARD
G 2,5
30.000 rpm
or U1gmm
Description
Order-No.
CP25-HSK-E40-A=603)
Form
A 2)
44544000600
40
60
Kanten 0,3x45
gebrochen
39
zul.Abweichg.n. Werkstoff:
tol.bearb.Mae:
Rohteil
-10
0,06 Nr.
G
max.
G
min.
H
max.
Datum:
Clamping Range /
Collets
H
min.
Name:
10-30
0,1 Gez.
30.08.11
Ho
-30-80
80-180
0,2 Gepr.
Gen.
0,3
180-500
0,5
Mastab:
Clamping
Nuts
Wrmebehandlung:
Gewicht:
verg. auf:
angelassen auf:
1234 g
Einsatztiefe:
Artikel-Bez. 2:
1:1
1,016,0
HPC25
HPC25-DI
Artikel-Nr.:
44544000600
GER25-HP/HPD/GBD
CP25-HSK-E40-A=60
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision
Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Passma Abma 500-1000 1,0
Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GER
M Q L 1)
06.09.2011 - K:\SW-AWU\Modelle\CPC-Futter\Zusammenstellungen\CPC11M\Katalog\43245001000-K
MINI
TAPERED
G 2,5
30.000 rpm
or U1gmm
Description
Order-No.
CPC11M-HSK-E50-A=60
43245000600
CPC11M-HSK-E50-A=100
43245001000
CPC16M-HSK-E50-A=60
43345000600
CPC16M-HSK-E50-A=100
43345001000
Kanten 0,3x45
gebrochen
Form
A 2)
Clamping
Nuts
43245971000
16
E
22
60
100
37
Passma
4,5
60
100
2,5
Abma
500-1000
1,0
23
50
30
39
31
72
48
15
28
21
21
35
..
- FAHRION
1,07,0
PRAZISION
GER11-HP
10
12
1,010,0
GER16-HP/
HPD/GBD
HPC11M
HPC11M-DI
HPC16MS
HPC16MS-DI
Accessories: Clamping Nuts pages 52, 53, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64,Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
1)
2)
3)
36
GER
M Q L 1)
STANDARD
G 2,5
30.000 rpm
or U1gmm
Description
CP25-HSK-E50-A=703)
Order-No.
44545000700
Form
40
A 2)
70
G
max.
G
min.
H
max.
H
min.
49
39
30
Clamping Range /
Collets
Clamping
Nuts
1,016,0
GER25-HP/HPD/GBD
HPC25
HPC25-DI
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GER
M Q L 1)
STANDARD
G 2,5
30.000 rpm
or U1gmm
Description
CP32-HSK-E63-A=704)
Order-No.
44646000700
Form
50
A 2)
70
G
max.
G
min.
H
max.
H
min.
47
Clamping Range /
Collets
Clamping
Nuts
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
1)
2)
3)
4)
37
GER
M Q L 1)
STANDARD
G 2,5
30.000 rpm
or U1gmm
Description
Order-No.
CP32-HSK-F63-A=653)
44686000650
Form
50
A 2)
65
G
max.
G
min.
H
max.
H
min.
39
Clamping Range /
Collets
Clamping
Nuts
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GOZ
M Q L 1)
STANDARD
G 2,5
30.000 rpm
or U1gmm
Description
CP225DG-HSK-F63-A=753)
Order-No.
48486000750
Form
50
A 2)
75
G
max.
G
min.
H
max.
H
min.
56
Clamping Range /
Collets
Clamping
Nuts
2,025,0
FM25DG-HP
HPC225
HPC225-DIG
Accessories: Clamping Nuts page 55, Wrenches page 57, Mounting Devices page 58, Precision Collets page 62, Sealing Discs page 63, Taper Wipers page 65,
Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
1)
2)
3)
38
GER
STANDARD
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
CP16-C4-A=55
44354000550
CP20-C4-A=552)
44454000550
Form
A 1)
30
AD
Clamping
Nuts
G
max.
G
min.
H
max.
H
min.
47
38
29
1,010,0
GER16-HP/HPD/GBD
HPC16
HPC16-DI
44
1,013,0
GER20-HP/HPD/GBD
HPC20
HPC20-DI
55
32
Clamping Range /
Collets
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Coolant Supply Tubes and Wrenches page 66
GER
STANDARD
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
Form
CP16-C5-A=60
44355000600
CP16-C5-A=100
44355001000
CP20-C5-A=602)
44455000600
CP25-C5-A=602)
44555000600
40
CP32-C5-A=602)
44655000600
50
30
A 1)
G
max.
60
47
38
100
87
51
47
48
49
32
G
min.
Clamping
Nuts
1,010,0
GER16-HP/HPD/GBD
HPC16
HPC16-DI
H
max.
H
min.
37
29
1,013,0
GER20-HP/HPD/GBD
HPC20
HPC20-DI
1,016,0
GER25-HP/HPD/GBD
HPC25
HPC25-DI
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
29
AD
60
Clamping Range /
Collets
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65
1)
2)
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on page 54
Extra short version, without stop screw
39
GER
STANDARD
G 2,5
05.09.2011 - K:\SW-AWU\Modelle\CP-Futter\Zusammenstellungen\CP32\CP-Katalog\44656001000-K
25.000 rpm
or U1gmm
Description
Order-No.
CP16-C6-A=602)
44356000600
CP16-C6-A=100
44356001000
CP20-C6-A=602)
44456000600
CP20-C6-A=100
44456001000
Form
30
32
A 1)
Passma
Abma
zul.Abweichg.n. Werkstoff:
tol.bearb.Mae:
Rohteil
-10
0,06 Nr.
10-30
0,1 Gez.
30-80
80-180
0,2 Gepr.
Gen.
0,3
180-500
0,5
500-1000
1,0
G
max.
60
44
100
83
60
100
1234 g
Artikel-Bez. 2:
Artikel-Nr.:
Clamping Range /
Clamping
Nuts
44656001000
Collets
H
min.
53
29
39
25
1,010,0
GER16-HP/HPD/GBD
HPC16
HPC16-DI
44
84
59
33
1,013,0
GER20-HP/HPD/GBD
HPC20
HPC20-DI
30
1,016,0
GER25-HP/HPD/GBD
HPC25
HPC25-DI
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
3,026,0
GER40-HP/HPD/GBD
HPC40
HPC40-DI
60
38
44556001000
100
78
62
36
CP25-C6-A=130
44556001300
130
99
CP25-C6-A=160
44556001600
160
118
CP32-C6-A=602)
44656000600
60
CP32-C6-A=100
44656001000
100
45
70
34
50
42
79
63
45
CP32-C6-A=130
44656001300
130
99
65
CP40-C6-A=652)
44756000650
65
51
CP40-C6-A=100
44756001000
100
86
46
50
63
Gewicht:
angelassen auf:
Einsatztiefe:
H
max.
44556000600
50
Wrmebehandlung:
verg. auf:
G
min.
CP25-C6-A=602)
40
Mastab:
CP32-C6-A=100
CP25-C6-A=100
AD
Name:
Datum:
45
53
-
25
-
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65
1)
2)
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on page 54
Extra short version, without stop screw
40
A
E
STANDARD
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
Form
A 1)
CP32-C8-A=100
44658001000
CP40-C8-A=100
44758001000
50
AD
100
Clamping
Nuts
G
max.
G
min.
H
max.
H
min.
63
41
45
27
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
55
47
3,026,0
GER40-HP/HPD/GBD
HPC40
HPC40-DI
86
63
Clamping Range /
Collets
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65
GER
MINI
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
Form
A 1)
CP11M-BT30-A=50
43263000500
CP11M-BT30-A=100
43263001000
AD
16
50
100
68
G
max.
32
36
G
min.
18
H
max.
22
26
Clamping Range /
Collets
Clamping
Nuts
1,07,0
GER11-HP
HPC11M
HPC11M-DI
H
min.
12
Accessories: Clamping Nuts page 52, Wrenches page 57, Mounting Devices page 58, Precision Collets page 59, Stop Screws page 64, Taper Wipers page 65,
Flex-Hone Brushes page 65, Pull Studs pages 68, 69
1)
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on pages 52 and 54
41
GER
STANDARD
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
Form
A 1)
G
max.
G
min.
H
max.
H
min.
44
28
31
16
28
31
CP16-BT30-A=50
44363000500
50
73
CP16-BT30-A=60
44363000600
60
82
CP16-BT30-A=75
44363000750
75
97
CP16-BT30-A=90
44363000900
90
112
CP16-BT30-A=100
44363001000
100
123
44
16
CP16-BT30-A=120
44363001200
120
112
45
14
CP20-BT30-A=75
44463000750
75
65
47
31
CP25-BT30-A=60
44563000600
60
77
59
35
42
30
CP25-BT30Z-A=75
44563000750
75
72
CP25-BT30Z-A=90
44563000900
90
87
56
38
39
23
CP25-BT30Z-A=120
44563001200
120
115
CP32-BT30Z-A=60
44663000600
60
69
CP32-BT30Z-A=75
44663000750
75
84
CP32-BT30Z-A=90
44663000900
90
94
45
24
30
AD
32
40
50
45
14
52
62
42
Clamping Range /
Collets
Clamping
Nuts
1,010,0
GER16-HP/HPD/GBD
HPC16
HPC16-DI
1,013,0
GER20-HP/HPD/GBD
HPC20
HPC20-DI
1,016,0
GER25-HP/HPD/GBD
HPC25
HPC25-DI
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 68, 69
1)
42
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on page 54
GER
MINI
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
Form
A 1)
G
max.
G
min.
H
max.
H
min.
CP11M-BTB40-A=75
43264000750
75
100
30
15
21
CP11M-BTB40-A=100
43264001000
100
68
36
18
26
12
CP11M-BTB40-A=120
43264001200
120
140
30
15
21
CP11M-BTB40-A=160
43264001600
160
68
36
18
26
12
CP16M-BTB40-A=75
43364000750
75
100
CP16M-BTB40-A=90
43364000900
CP16M-BTB40-A=120
43364001200
49
27
32
16
CP16M-BTB40-A=150
43364001500
16
AD/B
24
90
115
120
145
150
175
Clamping Range /
Collets
Clamping
Nuts
1,07,0
GER11-HP
HPC11M
HPC11M-DI
1,010,0
GER16-HP/HPD/GBD
HPC16MS
HPC16MS-DI
Accessories: Clamping Nuts pages 52, 53, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 68, 69
GER
TAPERED
G 2,5
12.09.2011 - K:\SW-AWU\Modelle\CPC-Futter\Zusammenstellungen\CPC16\CP-Katalog\44364401000-K
25.000 rpm
or U1gmm
Description
Order-No.
CPC16-BTB40-A=100
44364401000
CPC16-BTB40-A=160
44364401600
Form
AD/B
24
Kanten 0,3x45
gebrochen
1)
160
4,5
Wrmebehandlung:
Gewicht:
100
zul.Abweichg.n. Werkstoff:
tol.bearb.Mae:
Rohteil
-10
0,06 Nr.
72
180
Abma
10-30
0,1 Gez.
30-80
80-180
0,2 Gepr.
Gen.
0,3
180-500
0,5
500-1000
1,0
verg. auf:
Datum:
Name:
Mastab:
angelassen auf:
Einsatztiefe:
Artikel-Bez. 2:
48
28
35
20
1,010,0
GER16-HP/
HPD/GBD
Clamping
Nuts
HPC16C
HPC16C-DI
Accessories: Clamping Nuts page 53, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 68, 69
1)
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on pages 52 and 53
43
GER
STANDARD
G 2,5
13.09.2011 - K:\SW-AWU\Modelle\CP-Futter\Zusammenstellungen\CP32\CP-Katalog\44664000700-K
25.000 rpm
or U1gmm
Description
Order-No.
Form
Kanten 0,3x45
gebrochen
1)
Passma
E
CP16-BT40-A=70
44365000700
AD
CP16-BTB40-A=70
44364000700
AD/B
CP16-BT40-A=100
44365001000
AD
CP16-BTB40-A=100
44364001000
CP16-BTB40-A=120
44364001200
CP16-BTB40-A=160
44364001600
CP16-BTB40-A=200
70
110
100
138
120
140
160
198
44364002000
200
238
CP20-BTB40-A=75
44464000750
75
76
CP20-BTB40-A=120
44464001200
120
105
CP25-BTB40-A=55
44564000550
AD/B
55
93
CP25-BT40-A=70
44565000700
AD
CP25-BTB40-A=70
44564000700
AD/B
70
110
CP25-BT40-A=100
44565001000
AD
CP25-BTB40-A=100
44564001000
CP25-BTB40-A=120
44564001200
CP25-BTB40-A=160
44564001600
CP25-BTB40-A=200
44564002000
CP32-BTB40-A=55
44664000550
AD/B
CP32-BT40-A=70
44665000700
AD
CP32-BTB40-A=70
44664000700
AD/B
CP32-BT40-A=100
44665001000
AD
CP32-BTB40-A=100
44664001000
CP32-BTB40-A=120
44664001200
CP32-BTB40-A=160
CP40-BT40-A=70
CP40-BT40-A=100
44765001000
30
AD/B
AD/B
32
40
100
zul.Abweichg.n. Werkstoff:
tol.bearb.Mae:
Rohteil
-10
0,06 Nr.
100
Abma
10-30
0,1 Gez.
30-80
80-180
0,2 Gepr.
Gen.
0,3
180-500
0,5
500-1000
1,0
Datum:
Name:
Wrmebehandlung:
Gewicht:
verg. auf:
angelassen auf:
Artikel-Bez. 2:
Artikel-Nr.:
Clamping Range /
44664000700
Collets
Clamping
Nuts
G
max.
G
min.
H
max.
H
min.
45
28
31
16
1,010,0
GER16-HP/HPD/GBD
HPC16
HPC16-DI
57
31
1,013,0
GER20-HP/HPD/GBD
HPC20
HPC20-DI
60
44
60
35
1,016,0
GER25-HP/HPD/GBD
HPC25
HPC25-DI
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
3,026,0
GER40-HP/HPD/GBD
HPC40
HPC40-DI
24
42
20
120
AD/B
160
116
200
146
55
90
70
52
61
35
70
100
75
55
62
42
100
113
120
110
44664001600
160
129
44765000700
70
90
58
100
120
65
50
AD/B
AD
1234 g
Einsatztiefe:
Mastab:
63
70
42
52
32
48
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 68, 69
1)
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on page 54
44
GOZ
STANDARD
G 2,5
05.09.2011 - K:\SW-AWU\Modelle\CP-Futter\Zusammenstellungen\CP225DG\Katalog\48464000480-K
25.000 rpm
or U1gmm
Description
CP225DG-BTB40-A=48
Order-No.
48464000480
Form
AD/B
50
Werkstoff:
Wrmebehandlung:
Gewicht:
Rohteil
Nr.
verg. auf:
angelassen auf:
Name:
Mastab:
Artikel-Bez. 2:
Gez.
Gepr.
A 1)
Artikel-Nr.:
Clamping Range /
Clamping
Nuts
2,025,0
FM25DG-HP
HPC225
HPC225-DIG
48464000480
Collets
Gen.
CP225DG-BTB50-A=48
48
Einsatztiefe:
E 2)
F 2)
G
max.
G
min.
H
max.
H
min.
89
59
62
56
Accessories: Clamping Nuts page 55, Wrenches page 57, Mounting Devices page 58, Precision Collets page 62, Sealing Discs page 63, Stop Screws page 64,
Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 68, 69
GB
G 6,3
12.000 rpm
or U1gmm
SYNCHRO | T
Tap insertion depth T
Description
Order-No.
Form
ST16-GB-BTB40-A=84
52364000840
30
84
ST20-GB-BTB40-A=85
52464000850
32
85
ST25-GB-BTB40-A=89
52564000890
40
89
ST32-GB-BTB40-A=110
52664001100
50
110
ST40-GB-BTB40-A=115
52764001150
63
115
AD/B
Shank-
2,8 7,1
Shank-
89
Shank-
10 16
Shank-
18 25
18
22
25
Cutting range
Collets
M3M12
GER16-GBD
M3M16
GER20-GBD
M3M20
GER25-GBD
30
M4M27
GER32-GBD
33
M4M33
GER40-GBD
Accessories: Wrenches page 57, Mounting Devices page 58, Tap Collets pages 61, 62, Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 68, 69
1)
2)
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on page 55
Dimension E is for tool shanks 20 mm and dimension F is for tool shanks > 20 mm
45
E
A
G
STANDARD
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
CP32-BT50-A=70
44667000700
CP32-BTB50-A=100
44666001000
CP32-BTB50-A=160
44666001600
CP40-BT50-A=70
44767000700
CP40-BT50-A=100
44767001000
Form
AD
AD/B
AD
50
63
A 1)
G
max.
G
min.
H
max.
H
min.
70
90
75
45
55
30
100
150
70
160
200
80
70
120
100
150
53
55
48
70
63
60
-
35
-
Clamping Range /
Collets
Clamping
Nuts
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
3,026,0
GER40-HP/HPD/GBD
HPC40
HPC40-DI
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 68, 69
GB
G 6,3
12.000 rpm
or U1gmm
SYNCHRO | T
Tap insertion depth T
Description
Order-No.
Form
ST16-GB-BTB50-A=99
52366000990
30
99
ST20-GB-BTB50-A=100
52466001000
32
100
ST25-GB-BTB50-A=104
52566001040
40
104
ST32-GB-BTB50-A=120
52666001200
50
120
ST40-GB-BTB50-A=120
52766001200
63
120
AD/B
Shank-
2,8 7,1
Shank-
89
Shank-
10 16
Shank-
18 25
18
22
25
Cutting range
Collets
M3M12
GER16-GBD
M3M16
GER20-GBD
M3M20
GER25-GBD
30
M4M27
GER32-GBD
33
M4M33
GER40-GBD
Accessories: Wrenches page 57, Mounting Devices page 58, Tap Collets pages 61, 62, Taper Wipers page 65, Flex-Hone Brushes page 65, Pull Studs pages 68, 69
1)
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on page 54
46
GER
MINI
G 2,5
D1
25.000 rpm
or U1gmm
Description
Order-No.
Form
D1
A 2)
E
CP11M-CAT40-A=42)
43275001016
CP11M-CAT40-A=52)
43275001270
AD/B
16
44,45
130
150
G
max.
G
min.
H
max.
H
min.
43
19
32
10
Clamping
Range /
Collets
Clamping
Nuts
1,07,0
GER11-HP
HPC11M
HPC11M-DI
Accessories: Clamping Nuts page 52, Wrenches page 57, Mounting Devices page 58, Precision Collets page 59, Stop Screws page 64, Taper Wipers page 65,
Flex-Hone Brushes page 65
GER
A
E
TAPERED
D1
G 2,5
25.000 rpm
or U1gmm
Description
Order-No.
CPC16-CAT40-A=42)
44375401016
CPC16-CAT40-A=6
44375401524
2)
Form
AD/B
30
D1
44,45
A 2)
G
max.
4,5
125
56
2,5
175
66
G
min.
29
H
max.
42
47
H
min.
18
Clamping
Range /
Collets
Clamping
Nuts
1,010,0
GER16-HP/
HPD/GBD
HPC16C
HPC16C-DI
Accessories: Clamping Nuts page 53, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65
1)
2)
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on pages 52 and 53.
CAT40 is supplied with thread 5/8-11 UNC complying with ANSI B5.50
47
GER
STANDARD
G 2,5
D1
25.000 rpm
or U1gmm
Description
Order-No.
Form
D1
A 2)
E
CP16-CAT40-A=2,52)
44375000635
CP16-CAT40-A=42)
44375001016
CP16-CAT40-A=52)
CP20-CAT40-A=3
2)
2,5
30
125
44375001270
150
44475000762
CP20-CAT40-A=42)
44475001016
CP25-CAT40-A=42)
44575001016
32
AD/B
40
44,45
CP32-CAT40-A=32)
44675000762
CP32-CAT40-A=42)
44675001016
CP32-CAT40-A=5
2)
44675001270
CP32-CAT40-A=62)
44675001524
CP40-CAT40-A=42)
44775001016
50
63
H
max.
H
min.
28
32
16
1,010,0
GER16-HP/
HPD/GBD
HPC16
HPC16-DI
33
1,013,0
GER20-HP/
HPD/GBD
HPC20
HPC20DI
65
35
45
26
1,016,0
GER25-HP/
HPD/GBD
HPC25
HPC25-DI
62
75
58
44
65
41
48
27
51
75
58
26
HPC32
HPC32-DI
65
41
48
27
2,020,0
GER32-HP/
HPD/GBD
3,026,0
GER40-HP/
HPD/GBD
HPC40
HPC40-DI
45
63
85
94
5
6
134
74
Clamping
Nuts
G
min.
75
Clamping
Range /
Collets
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65
1)
2)
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on page 54
CAT40 is supplied with thread 5/8-11 UNC complying with ANSI B5.50
48
E
A
STANDARD
Order-No.
Form
D
Kanten 0,3x45
gebrochen
Passma
D1
A 2)
Abma
zul.Abweichg.n. Werkstoff:
tol.bearb.Mae:
Rohteil
-10
0,06 Nr.
10-30
0,1 Gez.
30-80
80-180
0,2 Gepr.
Gen.
0,3
180-500
0,5
500-1000
1,0
Datum:
Name:
31.08.11
Ho
44377001016
CP16-CAT50-A=6
2)
CP20-CAT50-A=4
2)
1:1
Wrmebehandlung:
Gewicht:
verg. auf:
angelassen auf:
Artikel-Bez. 2:
Spannzangenfutter
CP32-CAT50-A=3,5"
44677000889
44377001524
175
44477001016
87
115
85
115
95
120
95
57
120
67
44477001524
CP25-CAT50-A=42)
44577001016
CP25-CAT50-A=6
2)
44577001524
CP32-CAT50-A=4
2)
44677001016
CP32-CAT50-A=62)
44677001524
CP40-CAT50-A=42)
44777001016
CP40-CAT50-A=6
44777001524
30
32
AD/B
40
50
63
1234 g
Einsatztiefe:
CP20-CAT50-A=62)
2)
Mastab:
Artikel-Nr.:
E
CP16-CAT50-A=42)
25.000 rpm
or U1gmm
Description
G 2,5
D1
12.09.2011 - K:\SW-AWU\Modelle\CP-Futter\Zusammenstellungen\CP32\CP-Katalog\44677000889-K
Clamping
Nuts
G
min.
H
max.
H
min.
30
43
19
1,010,0
GER16-HP/
HPD/GBD
HPC16
HPC16-DI
32
1,013,0
GER20-HP/
HPD/GBD
HPC20
HPC20-DI
25
1,016,0
GER25-HP/
HPD/GBD
HPC25
HPC25-DI
27
2,020,0
GER32-HP/
HPD/GBD
HPC32
HPC32-DI
3,026,0
GER40-HP/
HPD/GBD
HPC40
HPC40-DI
57
36
69,85
Clamping
Range /
Collets
65
46
41
47
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65
1)
2)
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1 under Clamping Nuts on page 54
CAT50 is supplied with thread 1-8 UNC complying with ANSI B5.50
49
GER
MINI
H
L2
L1
Description
Order-No.
CP8M-Z10-L=150
42110001500
CP8M-Z10-L=200
42110002000
CP11M-Z16-L=150
42216001500
CP11M-Z16-L=200
42216002000
CP16M-Z16-L=150
42316001500
CP16M-Z20-L=150
42320001500
CP16M-Z20-L=200
42320502000
10
16
20
10
16
22
L1
138
188
133
183
117
L2 1)
12
Clamping
Range /
Collets
Clamping
Nuts
G
max.
G
min.
H
max.
H
min.
16
1,05,0
GER8-HP
HPC8M
36
18
26
12
1,07,0
GER11-HP
HPC11M
HPC11M-DI
48
28
35
16
1,010,0
GER16-HP/
HPD/GBD
HPC16MS
HPC16MS-DI
17
68
33
167
Accessories: Clamping Nuts pages 52, 53, Wrenches page 57, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63, Stop Screws page 64,
Taper Wipers page 65, Flex-Hone Brushes page 65
A
GB
Order-No.
ST16-GB-Z20-A=58
52304000580
20
ST16-GB-Z25-A=58
52305000580
25
ST20-GB-Z20-A=59
52404000590
20
ST20-GB-Z25-A=61
52405000610
25
ST25-GB-Z20-A=63
52504000630
20
ST25-GB-Z25-A=65
52505000650
ST32-GB-Z25-A=69
52605000690
ST32-GB-Z25-A=87
52605000870
ST32-GB-Z32-A=69
52606000690
30
58
32
40
25
32
ST40-GB-Z25-A=109
52705001090
25
ST40-GB-Z32-A=109
52706001090
32
Shank-
89
Shank-
10 16
Cutting range
Collets
M3M12
GER16-GBD
M3M16
GER20-GBD
M3M20
GER25-GBD
30
M4M27
GER32-GBD
33
M4M33
GER40-GBD
Shank-
18 25
59
61
63
65
69
50
Shank-
2,8 7,1
18
22
25
87
69
63
109
Accessories: Wrenches page 57, Tap Collets pages 61, 62, Taper Wipers page 65, Flex-Hone Brushes page 65
1)
50
L2 applies to Clamping Nuts without Sealing Discs, for Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on pages 52 and 53
GER
STANDARD
G 2,5
25.000 rpm
or U1gmm
CENTRO | P Version for HPC Clamping Nuts (without driving and positioning slot)
Description
Order-No.
Form
A 1)
CP32-A30H-A=50
44613000500
CP32-A30H-A=70
44613000701
50
50
66
70
76
G
max.
G
min.
H
max.
H
min.
52
40
Clamping Range /
Collets
Clamping
Nuts
2,020,0
GER32-HP/HPD/GBD
HPC32
HPC32-DI
Accessories: Clamping Nuts page 54, Wrenches page 57, Mounting Devices page 58, Precision Collets pages 59, 60, Tap Collets pages 61, 62, Sealing Discs page 63,
Stop Screws page 64, Taper Wipers page 65, Flex-Hone Brushes page 65
E
A
GOZ
STANDARD
G 2,5
25.000 rpm
or U1gmm
Description
CP225DG-A30-A=70
Order-No.
48413000700
Form
50
A 1)
70
F 2)
G
max.
G
min.
H
max.
H
min.
81
57
61
53
Clamping Range /
Collets
Clamping
Nuts
2,025,0
FM25DGHP
HPC225
HPC225-DIG
Accessories: Clamping Nuts page 55, Wrenches page 57, Mounting Devices page 58, Precision Collets page 62, Sealing Discs page 63, Stop Screws page 64,
Taper Wipers page 65, Flex-Hone Brushes page 65
1)
2)
Dimension A applies to Clamping Nuts without Sealing Discs. For Clamping Nuts with Sealing Discs see dimension A1) under Clamping Nuts on pages 54 and 55
Dimension E is for tool shanks 20 mm and dimension F is for tool shanks > 20 mm
51
GER
Order-No.
Clamping Range
for Collets
HPC8M
4381000
1,0 5,0
10
12
CP8M
GER8-HP
HPC11M
4381100
1,0 7,0
16
16,2
CP11MCPC11M
GER11-HP
HPC16MS
43812000010
HPC16M
4381200
20,9
CP16MCPC16M
GER16-HP/HPD/GBD
22
1,0 10,0
24
GER
Order-No.
Clamping Diameter
HPC11M-DI =3,0
43821010300
3,0
HPC11M-DI =4,0
43821010400
4,0
HPC11M-DI =5,0
43821010500
5,0
HPC11M-DI =6,0
43821010600
6,0
HPC11M-DI =7,0
43821010700
7,0
A1)
for Collets
16
18,7
+2,5
CP11MCPC11M
GER11-HP
GER
Order-No.
for Collets
AZ-ER8
4499000
HPC8M
GER8-HP
AZ-ER11
4499100
HPC11M-DI
GER11-HP
= for extraction of the Collet out of the Clamping Nut
52
GER
Order-No.
HPC16MS-DI
43822000010
HPC16M-DI
4382200
Clamping Range
D
22
1,0 10,0
24
A1)
for Collets
23,9
+3
CP16MCPC16M
GER16-HP/HPD/GBD
GER
Due to their design DI Clamping Nuts are longer than standard Clamping Nuts (A-dimension see product pages 16 to 51 plus A1))
L
L
Order-No.
Clamping Range
for Collets
HPC16C
4483200
1,0 10,0
24
23,2
CPC16
GER16-HP/HPD/GBD
GER
Description
Order-No.
Clamping Range
A1)
for Collets
HPC16C-DI
4484200
1,0 10,0
24
26,2
+3
CPC16
GER16-HP/HPD/GBD
53
GER
Order-No.
Clamping Range
D1)
for Collets
HPC16
4481200
1,0 10,0
30
23,4
CP16
GER16-HP/HPD/GBD
HPC20
4481300
1,0 13,0
32
24,6
CP20
GER20-HP/HPD/GBD
HPC25
4481400
1,0 16,0
40
25,6
CP25
GER25-HP/HPD/GBD
HPC32
4481500
2,0 20,0
50
26,9
CP32
GER32-HP/HPD/GBD
HPC40
4481600
3,0 26,0
63
31,5
CP40
GER40-HP/HPD/GBD
GER
Order-No.
Clamping Range
for Collets
HPC16-DI
4482200
1,0 10,0
30
26,4
+3
CP16
GER16-HP/HPD/GBD
HPC20-DI
4482300
1,0 13,0
32
27,6
+3
CP20
GER20-HP/HPD/GBD
HPC25-DI
4482400
1,0 16,0
40
28,9
+3,3
CP25
GER25-HP/HPD/GBD
HPC32-DI
4482500
2,0 20,0
50
30,1
+3,2
CP32
GER32-HP/HPD/GBD
HPC40-DI
4482600
3,0 26,0
63
34,8
+3,3
CP40
GER40-HP/HPD/GBD
54
GOZ
Order-No.
Clamping Range
for Collets
HPC225
4881500
2,0 25,0
50
21,2
CP225DG
FM25DGHP
HPC432
4881700
4,0 32,0
63
28
CP432DG
FM32DG
GOZ
Order-No.
Clamping Range
A1)
for Collets
HPC225-DIG
4882400
2,0 25,0
50
25,2
+4
CP225DG
FM25DGHP
HPC432-DIG
4882700
4,0 32,0
63
32
+4
CP432DG
FM32DG
55
GER
Order-No.
Clamping Range
for Collets
4185200
1,0 10,0
30
21,3
CP16
GER16-HP
CP20-HSS--0,4
4185300
1,0 13,0
32
22,8
CP20
GER20-HP
CP25-HSS--0,4
4185400
1,0 16,0
40
23,8
CP25
GER25-HP
CP32-HSS--0,4
4185500
2,0 20,0
50
24,9
CP32
GER32-HP
CP40-HSS--0,4
4185600
3,0 26,0
63
31,6
CP40
GER40-HP
GER
Order-No.
Clamping Range
A1)
for Collets
CP16-HSS-DI--0,4
4186200
1,0 10,0
30
24,8
+2,5
CP16
GER16-HP
CP20-HSS-DI--0,4
4186300
1,0 13,0
32
25,9
+3,1
CP20
GER20-HP
CP25-HSS-DI--0,4
4186400
1,0 16,0
40
26,8
+3
CP25
GER25-HP
CP32-HSS-DI--0,4
4186500
2,0 20,0
50
28,2
+3,3
CP32
GER32-HP
CP40-HSS-DI--0,4
4186600
3,0 26,0
63
34,6
+3
CP40
GER40-HP
56
GER
GOZ
GB
Order-No.
ROD10
4996200
HPC8M
RO16
4990400
HPC11MHPC11M-DI
RO22
4990500
HPC16MSHPC16MS-DI
RO24
4990600
HPC16MHPC16M-DIHPC16CHPC16C-DI
RO30
4990800
HPC16HPC16-DICP16-HSS--0,4
CP16-HSS-DI--0,4ST16-GB
RO32
4991000
HPC20HPC20-DICP20-HSS--0,4
CP20-HSS-DI--0,4ST20-GB
RO40
4991400
HPC25HPC25-DICP25-HSS--0,4
CP25-HSS-DI--0,4ST25-GB
RO50
4991800
HPC32HPC32-DICP32-HSS--0,4
CP32-HSS-DI--0,4ST32-GBHPC225HPC225-DIG
RO63
4992000
HPC40HPC40-DICP40-HSS--0,4
CP40-HSS-DI--0,4ST40-GBHPC432HPC432-DIG
Order-No.
VKT
DRO16
4993400
HPC11MHPC11M-DI
DRO22
4993500
HPC16MSHPC16MS-DI
DRO24
4993600
HPC16MHPC16M-DIHPC16CHPC16C-DI
9x12
HPC16HPC16-DICP16-HSS--0,4CP16-HSS-DI--0,4
ST16-GB
DRO30
4993800
DRO32
4994000
HPC20HPC20-DICP20-HSS--0,4CP20-HSS-DI--0,4
ST20-GB
DRO40
4994400
HPC25HPC25-DICP25-HSS--0,4CP25-HSS-DI--0,4
ST25-GB
DRO50
4994800
DRO63
4995000
14x18
HPC32HPC32-DICP32-HSS--0,4CP32-HSS-DI--0,4
ST32-GBHPC225HPC225-DIG
HPC40HPC40-DICP40-HSS--0,4CP40-HSS-DI--0,4
ST40-GBHPC432HPC432-DIG
57
GER
GOZ
GB
GOZ
GB
Order-No.
VKT
DRMO-10-100
4490400
9x12
DRMO-20-200
4490600
DRMO-60-300
4490800
14x18
Torque range
10 100 Nm
DRO16DRO22DRO24DRO30DRO32
20 200 Nm
DRO40DRO50DRO63
60 300 Nm
GER
Order-No.
TBRS25
4980200
25
HSK25
TBRS32
4980400
32
HSK32C3
TBRS40
4980600
40
HSK40C4
TBRS46
4980800
46
MAS/BT30
TBRS50
4981000
50
SK30HSK50C5
TBRS63
4981200
63
SK40HSK63C6MAS/BT40CAT40
TBRS80
4981600
80
HSK80C8
TBRS97
4981800
97,5
SK50
TBRS100
4982000
100
HSK100MAS/BT50CAT50
= for easy and safe clamping of holder shanks at the flange using rollers for
mounting and removing cutting tools, therefore self clamping and ideal
for HSK forms E and F as well as polygonal shanks
= for all common holder shanks such as SK (DIN 69871),
HSK (DIN 69893 forms A, B, C, D, E, F), polygonal shanks (ISO 26623-1),
MAS/BT (JIS B 6339) and CAT (ANSI B5.50)
58
GER
Order-No.
1303001
1303004
1302001
1302004
5 m
8,5
13,6
2 m
11,3
18
1302101
426E GER16-HP
2 m
17
27,5
430E GER25-HP
470E GER32-HP
472E GER40-HP
1302201
1302204
1302301
1302304
1302401
1302404
1302501
1302504
from to
steps
1,0 5,0
0,5
1/161/83/16
1,0 7,0
0,5
1/161/83/161/4
1,0 10,0
0,5
0,1
0,1
5,66,37,1
1/163/321/85/323/167/321/49/325/1611/32
3/813/32
1302104
428E GER20-HP
Profile
2 m
21
31,5
2 m
26
34
2 m
33
40
2 m
41
46
1,0 13,0
0,5
1/83/161/45/163/87/161/2
1,0 16,0
0,5
1/83/161/45/163/87/161/29/165/8
2,0 20,0
0,5
1/83/161/45/163/87/161/29/165/83/4
3,0 26,0
0,5
1/43/81/25/83/4 7/81
Ordering Example
Complete Order-No. with the diameter,
e.g. GER32-HP 6 mm = Order-No. 13024010600 resp. 1/8
= Order-No. 13024040318
Inch conversion table please see page 71 at the bottom!
59
GER
Precision Coolant Collets GER-HPD with Seals for IC (Inner Coolant Supply) 2 m
Description
425E GER16-HPD
427E GER20-HPD
Order-No.
1342101
1342104
1342201
1342204
2 m
16,7
27,5
2 m
20,7
31,5
2 m
25,7
34
2 m
32,7
40
2 m
40,7
46
Profile
469E GER32-HPD
471E GER40-HPD
1342304
1342401
1342404
1342501
steps
3,0 10,0
1,0
1/83/161/45/163/8
3,0 13,0
1,0
1/83/161/45/163/87/161/2
3,0 16,0
1342301
429E GER25-HPD
from to
1,0
1/83/161/45/163/87/161/29/165/8
3,0 20,0
1,0
1/83/161/45/163/87/161/29/165/8
6,08,010,012,014,016,018,020,022,025,0
Precision Coolant Collets GER-HPDD with Seals for IC (Inner Coolant Supply) and Jet Holes 2 m
Description
Order-No.
429E GER25-HPDD
1343301
2 m
25,7
34
469E GER32-HPDD
1343401
2 m
32,7
40
Profile
Standard bore
4,06,08,010,012,014,0
4,06,08,010,012,014,016,018,0
Ordering Example
Complete Order-No. with the diameter,
e.g. GER20-HPD 8 mm = Order-No. 13422010800 resp. 3/16 =
Order-No. 13422040476
Inch conversion table please see page 71 at the bottom!
Incorrect Position!
60
Correct Position!
GER
GB
Tap Collets GER-GBD with Internal Square Drive and Seals for IC (Inner Coolant Supply) 10 m
Description
4031E GER16-GBD
4276E GER20-GBD
4282E GER25-GBD
4537E GER32-GBD
4716E GER40-GBD
Order-No.
1332101
1332201
1332301
1332401
1332501
10m
10m
10m
10m
10m
16,7
20,7
25,7
32,7
40,7
27,5
31,5
34
40
46
L2
Profile
Standard bore
(Shank-/Square)
2,8/2,1
3,5/2,74,0/3,24,5/3,555,0/4,05,5/4,56,0/5,06,3/5,0
7,0/5,67,1/5,6
22
8,0/6,39,0/7,1
18
3,5/2,74,0/3,24,5/3,555,0/4,05,5/4,56,0/5,06,3/5,0
7,0/5,67,1/5,6
22
8,0/6,39,0/7,1
25
10,0/8,011,0/9,011,2/9,0
18
3,5/2,74,0/3,24,5/3,555,0/4,05,5/4,56,0/5,06,3/5,0
7,0/5,67,1/5,6
22
8,0/6,39,0/7,1
25
10,0/8,011,0/9,011,2/9,012,0/9,012,5/10,014,0/11,2
16,0/12,5
18
4,0/3,24,5/3,555,0/4,05,5/4,56,0/5,06,3/5,07,0/5,6
7,1/5,6
22
8,0/6,39,0/7,1
25
10,0/8,011,0/9,011,2/9,012,0/9,012,5/10,014,0/11,2
16,0/12,5
30
18,0/14,520,0/16,0
18
22
25
33
18
6,0/5,06,3/5,07,0/5,67,1/5,6
ww
ww
ww
8,0/6,39,0/7,1
10,0/8,011,0/9,011,2/9,012,0/9,012,5/10,014,0/11,2
16,0/12,5
18,0/14,520,0/16,022,0/18,025,0/20,0
Ordering Example
Complete Order-No. with the diameter, e.g. GER40-GBD 8/6,3 mm =
Order-No. 13325010800
61
GER
GB
Tap Collets GER-GBDD with Internal Square Drive, Seals for IC (Inner Coolant Supply) and Jet Holes 10 m
Description
Order-No.
4276E GER20-GBDD
1333201
4537E GER32-GBDD
1333401
10m
20,7
31,5
10m
32,7
40
Standard bore
(Shank-/Square)
Profile
4,5/3,556,0/5,07,0/5,68,0/6,39,0/7,110,0/8,0
ww
4,5/3,556,0/5,07,0/5,68,0/6,39,0/7,110,0/8,011,0/9,0
12,0/9,014,0/11,216,0/12,518,0/14,5
ww
Order-No.
462E FM25DG-HP
1224201
3m
35,05
52
Profile
Standard bore
3,04,06,08,010,012,014,016,018,020,025,0
Ordering Example
Complete Order-No. with the diameter,
e.g. FM25DG-HP 20 mm = Order-No. 12242012000
62
Order-No.
1220201
1220204
1220301
6m
35,05
52
10m
43,7
60
Profile
from to
steps
2,0 25,0
0,5
1/81/43/81/25/83/41
4,0 32,0
0,5
GER
Sealing Discs DI
Description
Order-No.
Profile
2430301
DI16
from to
steps
1,0 10,0
0,5
12,6
1/83/161/45/163/8
2430304
DI20
2440301
15,8
2,0 13,0
DI25
2450301
20,2
2,0 16,0
2460301
DI32
26,2
2460304
+0,4/-0,1
1/83/161/45/16
3/81/25/83/4
3,0 26,0
34,2
2470304
0,5
2,0 20,0
2470301
DI40
range
for Clamping
Nuts
for Collets
HPC16MS-DI
HPC16M-DI
HPC16C-DI
HPC16-DI
GER16-HP
HPC20-DI
GER20-HP
HPC25-DI
GER25-HP
HPC32-DI
GER32-HP
HPC40-DI
GER40-HP
0,5
1/83/161/45/163/8
1/25/83/47/81
Ordering Example
Complete Order-No. with the diameter,
GOZ
Order-No.
DIG225 (DS50)
2159201
31
DIG432 (DS60)
2159301
40
Profile
from to
4,0 25,0
4,0 32,0
steps
range
1,0
-0,5
for Clamping
Nuts
for Collets
HPC225-DIG
FM25DGHP
HPC432-DIG
FM32DG
GOZ
GB
Order-No.
BIS C-122-04/L
4499900
all HSK-A
63
SB
SW1
L1
GER
GOZ
GER
GOZ
Order-No.
SW1
AS-CP11-U
44981000100
M8x1
AS-CP16-U
44982000100
M11x1
AS-CP20-U
44983000100
M14x1
AS-CP25/32/225-U
44984000101
M18x2,5
AS-CP25-U
44984000102
M18x1,5
AS-CP32/225-U
44984000103
M22x1,5
AS-CP40-U
44985000100
M28x1,5
SB
L1
1,6
1,5
CP20
CP25CP32CP225DG
(for old chuck types)
10
6
CP25
1,6
CP40
L2
G
SW1
SB
L1
Order-No.
SW1
AS-CP11-W
44981000200
M8x1
AS-CP16-W
44982000200
M11x1
AS-CP25/32/225-W
44984000201
M18x2,5
AS-CP25-W
44984000202
M18x1,5
AS-CP32/225-W
64
44984000203
M22x1,5
SB
L1
1,2
L2
18
4,5
CP11MCPC11M
CP16MCPC16MCP16CPC16
(for old chuck types)
22
10,5
1,6
10
28
CP25CP32CP225DG
(for old chuck types)
CP25
14
GER
GOZ
GB
Order-No.
KW-ER16
2231600
CP16CPC16CP16MST16-GB
KW-ER20
2232000
CP20ST20-GB
KW-ER25
2232500
CP25ST25-GB
KW-ER32
2233200
CP32ST32-GB
KW-ER40
2234000
CP40ST40-GB
KW-OZ225
2237500
CP225DG
KW-OZ432
2238200
CP432DG
for cleaning of the collet closing taper
GER
GOZ
GB
Flex-Hone Brushes FH
Description
Order-No.
Available measurements
(please indicate when ordering)
FH-BC 180 SC
2400501
6,478910111212,71416182022,225,4
Ordering Example
Complete Order-No. with the diameter,
e.g. FH-BC 180 SC 12,7 mm = Order-No. 24005011270
65
GER
GOZ
GB
GER
GOZ
GB
Order-No.
for HSK
Form
IKR-HSK32
2490300
32
M10x1
IKR-HSK40
2490400
40
M12x1
IKR-HSK50
2490500
50
IKR-HSK63
2490600
63
A and E
M16x1
M18x1
IKR-HSK80
2490700
80
M20x1,5
IKR-HSK100
2490800
100
M24x1,5
Order-No.
for HSK
SCHL-IKR-HSK32
2492300
32
SCHL-IKR-HSK40
2492400
40
SCHL-IKR-HSK50
2492500
50
SCHL-IKR-HSK63
2492600
63
SCHL-IKR-HSK80
2492700
80
SCHL-IKR-HSK100
2492800
100
66
GER
GOZ
GB
GOZ
GB
GOZ
GB
GOZ
GB
Order-No.
L1
L2
D1
D2
D3
AZB30-DIN-A
2910300
44
24
13
13
M12
15
30
AZB40-DIN-A
2910500
54
26
19
14
17
M16
15
40
AZB50-DIN-A
2910700
74
34
28
21
25
M24
15
50
GER
Order-No.
L1
L2
D1
D2
D3
AZB30-DIN-B
2911300
44
24
13
13
M12
15
30
AZB40-DIN-B
2911500
54
26
19
14
17
M16
15
40
AZB50-DIN-B
2911700
74
34
28
21
25
M24
15
50
GER
Order-No.
L1
L2
D1
D2
D3
AZB40-ISO-A
2920500
45
16,4
19
12,95
17
M16
45
40
AZB50-ISO-A
2920700
65
25,5
29
19,6
25
M24
45
50
GER
Order-No.
L1
L2
D1
D2
D3
AZB40-ISO-B
2921500
45
16,4
19
12,95
17
M16
45
40
AZB50-ISO-B
2921700
65
25,5
29
19,6
25
M24
45
50
67
GER
GOZ
GB
GOZ
GB
GOZ
GB
GOZ
GB
Order-No.
L1
L2
D1
D2
D3
AZB40-DIN 2080-G
2943500
53
25
25
21,1
17
M16
15
40
AZB50-DIN 2080-G
2943700
65
25,5
39,5
32
25
M24
15
50
GER
Order-No.
L1
L2
D1
D2
D3
AZB30-BT-45-A
2930300
43
23
11
13
M12
45
30
AZB40-BT-45-A
2930500
60
35
15
10
17
M16
45
40
AZB50-BT-45-A
2930700
85
45
23
17
25
M24
45
50
GER
Order-No.
L1
L2
D1
D2
D3
AZB30-BT-30-A
2931300
43
23
11
13
M12
30
30
AZB40-BT-30-A
2931500
60
35
15
10
17
M16
30
40
AZB50-BT-30-A
2931700
85
45
23
17
25
M24
30
50
GER
Order-No.
L1
L2
D1
D2
D3
AZB30-BT-90-A
2932300
43
23
11
13
M12
90
30
AZB40-BT-90-A
2932500
60
35
15
10
17
M16
90
40
AZB50-BT-90-A
2932700
85
45
23
17
25
M24
90
50
68
GER
GOZ
GB
GOZ
GB
GOZ
GB
Order-No.
L1
L2
D1
D2
D3
AZB30-BT-45-B
2933300
43
23
11
13
M12
45
30
AZB40-BT-45-B
2933500
60
35
15
10
17
M16
45
40
AZB50-BT-45-B
2933700
85
45
23
17
25
M24
45
50
GER
Order-No.
L1
L2
D1
D2
D3
AZB30-BT-30-B
2934300
43
23
11
13
M12
30
30
AZB40-BT-30-B
2934500
60
35
15
10
17
M16
30
40
AZB50-BT-30-B
2934700
85
45
23
17
25
M24
30
50
GER
Order-No.
L1
L2
D1
D2
D3
AZB30-BT-90-B
2935300
43
23
11
13
M12
90
30
AZB40-BT-90-B
2935500
60
35
15
10
17
M16
90
40
AZB50-BT-90-B
2935700
85
45
23
17
25
M24
90
50
69
GER
GOZ
GER
GOZ
GER
GOZ
Order-No.
4970200
50 and 63 mm
CP32CP225CP225DG
CP40CP432DG
Coolant Bath KW
Description
Order-No.
KW1
4978500
SK40HSK63C6MAS/BT40CAT40
Mounting Device TBRS-KW with Roller Bearing incl. installation parts for fixing on a work bench
Description
Order-No.
TBRS63-KW
49812000010
63
SK40HSK63C6
MAS/BT40CAT40
70
Information
Conversion Table
Conversion of inch to metric, which is in accordance with the last 4 digits of the order number:
1/16 = 0159
3/32 = 0238
1/8 = 0318
5/32 = 0397
3/16 = 0476
7/32 = 0556
1/4 = 0635
9/32 = 0714
5/16 = 0794
11/32 = 0873
3/8 = 0953
13/32 = 1032
7/16 = 1111
1/2 = 1270
9/16 = 1429
5/8 = 1588
11/16 = 1746
3/4 = 1905
13/16 = 2064
7/8 = 2223
1 = 2540
Ordering Example
Collet Chuck
e.g. CP32-B40-A=100
e.g. CP32-B40-A=100
+ Clamping Nut
e.g. HPC32
e.g. HPC32-DI
+ Sealing Disc
none
e.g. DI32
e.g. GER32-HP
e.g. GER32-HPD
e.g. GER32-GBD
e.g. GER32-HP
+ Collet
+ Accessories
In order to guarantee the highest possible flexibility of the Precision Collet Chuck
CENTRO | P, the Collet Chucks, Clamping Nuts, Collets and the accessories MUST
be ordered separately.
Please do not hesitate to contact us if you require a version that is not included in this catalogue.
71
09.2012 || Apollo 11
Tool clamping
Tool clamping systems
Workpiece clamping