Académique Documents
Professionnel Documents
Culture Documents
Print Options
2005 Electronics for Imaging, Inc. The information in this publication is covered
under Legal Notices for this product.
45048778
20 May 2005
CONTENTS
CONTENTS
INTRODUCTION
PRINT OPTIONS
Fiery print options
More about print options
INDEX
7
8
9
9
21
Auto Trapping
21
Booklet Maker
21
Centering Adjustment
23
Creep Adjustment
24
Duplex
24
Image Shift
26
Scale
26
27
INTRODUCTION
INTRODUCTION
This manual provides a description of the Fiery print options.
Refers to
Aero
Copier
DocuColor 5065
Fiery
Mac OS
Mac OS 9, Mac OS X
Titles in italics
Windows
Important information
PRINT OPTIONS
PRINT OPTIONS
This chapter explains each print option, default setting, and any constraints or requirements.
It also provides details about specific print options.
10
PRINT OPTIONS
To determine the current Setup defaults, print the Configuration page from Command
WorkStation.
Option and settings
(default setting is underlined)
Description
Requirements, constraints,
and information
Specify to align the front cover image to the This option is available in the Windows
back cover image when using the Image Shift 2000/XP/Server 2003 printer drivers or
print option.
Command WorkStation. For more
information, see page 26.
This option is not available for PCL
printing.
Auto Trapping
Off/On
Specify whether the job should automatically For more information, see page 21.
trap text and graphics.
This option is not available for PCL
printing.
Back Cover
None/Print on Front/Print on Back/Print
on Both/Blank Front and Back
Black Detection
On/Off
Black Overprint
Printers default/TextGraphics/Text/Off
11
PRINT OPTIONS
Description
Booklet Maker
Specify how you want pages of your job
None/Saddle/Saddle (Right Binding)/
arranged in special layouts for folding or
Perfect/ Perfect (Right Binding)/Gang Up - cutting after printing.
Speed Print/Gang Up - Double Print
Requirements, constraints,
and information
For more information, see page 21.
Brightness
85% Lightest/90% Lighter/95% Light/
100% Normal/105% Dark/ 110% Darker/
115% Darkest
Select 85% for a substantially lighter image, This option is not available for PCL
115% for a substantially darker image, or use printing.
one of the settings in between.
Centering Adjustment
XY Centering/Bottom X Centering
Select Quick to use one-dimensional transfer Printers default reflects the setting specified
curves to adjust density output of individual in Fiery Setup. For Windows, choose Expert
Color as the Print Mode to access this
color channels.
option.
Select Full (Source GCR) for a more
For more information, see Color Printing.
complete and accurate simulation.
Full (Source GCR) applies colorimetric
This option is not available for PCL
transformations that adjust hue as well as
printing.
output density. This option produces output
that maintains the same amount of black as
the source document.
Collate
Off/On
12
PRINT OPTIONS
Description
Color Mode
Specify the color mode for the current
Printers default/CMYK/Grayscale
print job.
(from Mac OS 9 printer driver and Windows
Select CMYK, Standard Color, or Expert
PCL driver)
OR
Print Mode
Standard Color/Expert Color/Grayscale
(from the Windows PS printer drivers and
Mac OS X printer driver)
Requirements, constraints,
and information
The options differ depending on which
printer driver you use.
For Windows, you must choose Expert Color
to set other color print options, including
Pure Black Text/Graphics.
Select Grayscale for a grayscale or black-andTo achieve 65 pages per minute (ppm), select
white document.
Grayscale in Color Mode. If you do not
select Grayscale, the maximum speed is only
50 ppm.
For more information, see Color Printing.
Combine Separations
On/Off
Copies
1-9999
Cover Source
Same as Job/Tray 1/Tray 2/Tray 3/Tray 4/
Tray 5 (Bypass)/ Tray 6
Create Master
None/1-15
Creep Adjustment
None/Thick/Normal
13
PRINT OPTIONS
Description
Face-Down Printing
Face Up/Face Down
Fasten Mode
Off/Fold and Staple/Fold
Front Cover
None/Print on Front/Print on Back/Print
on Both/Blank Front and Back
Requirements, constraints,
and information
Gloss Level
Normal/Enhanced
Group Name
Group Password
Hole Punching
Off/2 Holes/3 Holes/4 Holes
Image Quality
Printers default/Normal/Best
Imposition Reduction
On/Off
Select On when the original document size is N OTE : If Imposition Reduction is set to
to be printed on the same paper size by
Off, make sure you select the actual print size
reducing the image size by 1/2.
of your document output using the Print
Size option.
14
PRINT OPTIONS
Description
Requirements, constraints,
and information
Image Smoothing
Printer's Default/Automatic/Off/On/
Below 90 ppi/Below 150 ppi/
Below 200 ppi/Below 300 ppi
Manual Duplex
Off/Manual
Specify On if you want to manually load and For more information, see page 25.
turn over paper in the bypass tray.
Specify a media quality setting for Coated 1. You must set the Paper Source to Tray 5.
15
PRINT OPTIONS
Description
Requirements, constraints,
and information
Media Type
Use Machine Settings/Plain (64-105gsm)/
Plain (Side 2)(64-105gsm)/Transparency/
Tab Stock 1 (105-176gsm)/
Tab Stock 2 (177-280 gsm)/
Labels 1 (105-176gsm)/
Labels 2 (177-220 gsm)/
Coated 1 (105-176gsm)/
Coated 1 (Side 2)(105-176gsm)/
Coated 2 (177-220gsm)/
Coated 2 (Side 2) (177-220 gsm)/
Coated 2 (221-280 gsm)/
Coated 2 (Side 2)(221-280 gsm)/
Holepunched/ Recycled (64-104gsm)
Heavyweight 1 (105-176 gsm)/
Heavyweight 1 (Side 2)(105-176 gsm)/
Heavyweight 2 (177-220 gsm)/
Heavyweight 2 (Side 2)(177-220 gsm)/
Heavyweight 2 (221-300 gsm)/
Heavyweight 2 (Side 2)(221-300 gsm)/
Custom 1- Custom 5
Mixed Media
Define (define mixed media)
Click Define to specify the media types used This option is only available in the Windows
for specific pages.
PostScript printer driver.
Offset Mode
Printers default/On/Off
16
PRINT OPTIONS
Description
Orientation
Portrait/Landscape
Output Profile
Use Media Defined Profile/
Use Servers Default/
Use Output Profile
Requirements, constraints,
and information
Page Size
Letter/8.5x11 LEF/8.5x11 SEF/A4 LEF/
A4 SEF/ A5 LEF/A5 SEF/297x223mm LEF/
B5 LEF/B5 SEF/8.5x13 SEF/8.5x14 SEF/
B4 SEF/A3 SEF/11x17 SEF/12x18 SEF/
SRA3 SEF/13x19 SEF/4x6 SEF/9x11 LEF/
5x7 SEF/PostScript Custom Page Size/A5/
A4/A3/9x11/Legal/Tabloid
Paper Source
Auto Select/Tray 1/Tray 2/Tray 3/
Tray 4/Tray 5 (Bypass)/ Tray 6
Preview Master
Click to preview
17
PRINT OPTIONS
Description
Requirements, constraints,
and information
Print Master
Printers default/On/Off
Print Mode
Punch Position
None/Left/Right/Top
18
PRINT OPTIONS
Description
Requirements, constraints,
and information
Select Off to print black text and graphics as Printers default reflects the setting specified
in Fiery Setup.
a four-color black using C, M, Y, and K
toner, and to use normal PostScript
This option automatically enables the Black
rendering.
Overprint option.
Select On to print black text and graphics as
For more information, see Color Printing.
a one-color black, using 100% black toner
only.
This option is not available for PCL
printing.
Rendering Style
Printers default/Photographic/
Presentation/Absolute Colorimetric/
Relative Colorimetric
RGB Separation
Printers default/Simulation/Output
Rotate 180
Yes/No
19
PRINT OPTIONS
Description
Requirements, constraints,
and information
Scale
25-400%
100%
Specify whether to insert a slip sheet between This option is effective only for non-sorted
copies or pages of multiple-copy jobs.
or collated jobs.
Stapler Mode
Specify how to staple multiple-page/multiple
Off/Left Bottom Single/Right Bottom
copy jobs.
Single/Left Top Single/Right Top Single/
Left Double/Bottom Double/Right Double/
Top Double
Text/Graphics Edge Enhancement
Printers default/On/Off
Text/Graphics Quality
Printers default/Normal/Best
Transparency Interleaving
Off/On
20
PRINT OPTIONS
Description
Requirements, constraints,
and information
Tray Alignment
Enable/Disable
Specify if you want to enable tray alignment. For more information, see Command
WorkStation Help.
This option is not available for PCL
printing.
Units
inches/mm/points
Use Master
None/1-15
21
PRINT OPTIONS
Auto Trapping
Use this option to apply the Auto Trapping feature for your print job. When you set this
option to On, it ensures proper registration and fit of adjacent colors.
The following illustration is an example of the On and Off settings for Auto Trapping.
Auto Trapping
1
2
Off
On
Booklet Maker
Use this option to arrange the pages of your print job in special layouts for folding or cutting
after printing.
N OTE : The Mac OS 9 printer driver does not support Booklet Maker.
N OTE : Custom Paper Sizes are not supported when creating a booklet.
Off: The job is printed without any booklet imposition features.
Saddle: Choose this setting to print entire documents that are folded and stacked in booklet
order. Finished pages can be stapled or stitched across the center fold, or spine.
You can also use Creep to adjust the image shifting that may occur when you print booklet
jobs. For more information, see Creep Adjustment on page 24.
22
PRINT OPTIONS
Saddle (Right Binding): This option is the same as Saddle, except that the page order sequence
Front
Back
Perfect: Choose this setting to print separate folded pages that are stacked in booklet order.
Finished pages are stitched adjacent to one another for trimming or gluing.
Perfect (Right Binding): This option is the same as Perfect, except that the page order
sequence is from right to left.
Perfect Booklet
Front
Back
Gang-Up - Double Print: Choose this setting to print a job so that the data on the first page is
duplicated on the first sheet. The next sheet duplicates the data on the second page, and
so forth. For example, when each of the printed copies is cut in half, the result is two complete
sets of the same document.
Gang-Up - Double Print
Simplex
Front only
Duplex
Front
Back
23
PRINT OPTIONS
Gang-Up - Speed Print: Choose this setting to speed print a job so that when the sheets are
stacked and cut from the central position, the job is numbered in order and separated as two
stacks. The order of print is such that when they are cut in half, they can be combined to form
a single complete set of the document, in faster printing time.
Gang-Up - Speed Print
Simplex
Duplex
Front only
Front
Back
Centering Adjustment
Use this option to specify how you want the image positioned on the page.
N OTE : Centering Adjustment is available only when Booklet Maker is selected.
Bottom X Centering
Positions the image flush with the bottom of the page.
24
PRINT OPTIONS
Creep Adjustment
Use this option to adjust images that may shift from the center of the sheet in booklet jobs.
Creep occurs in booklets that contain a large number of pages or when booklets are printed
on heavy media.
N OTE : To use this option you must set the Booklet Maker option to Saddle or Saddle (Right
Duplex
The Fiery copier is equipped for automatic duplex printing. When the Duplex print option is
set to one of the duplex settings, the copier automatically turns the paper for printing on the
opposite side.
TO PRINT DUPLEX PAGES AUTOMATICALLY
1 Choose Print in your application and locate the Duplex print option.
The location of Fiery print options varies, depending on the printer driver that you use.
2 Choose a Duplex setting.
Top-Top: Prints the top of the image on Side 1 on the same edge of the page as the top of the
image on Side 2.
Top-Bottom: Prints the top of the image on Side 1 on the opposite edge of the page from the
Top-Bottom
Portrait
2
1
Landscape
2
1
25
PRINT OPTIONS
Make sure there is paper in the bypass tray. After the first side prints, you may receive a
message on the Fiery display window.
4 Remove the pages from the output tray and flip them as shown below.
In either the Top-Top or Top-Bottom row, find the illustration that shows how the pages look
in the output tray. Before you place the pages in the bypass tray, flip them along the edge
indicated by the arrows.
For Top-Top
output
For TopBottom
output
N OTE : For jobs imposed using Impose, always flip the pages along the long edge of the page.
5 Place the pages in the bypass tray.
PRINT OPTIONS
26
Image Shift
Image Shift allows you to specify how much the image on each page should be shifted relative
to the X (horizontal) and Y (vertical) axis. Moving the job content in this manner enables you
to allow for various finishing options, such as stapling and binding. Image Shift prevents the
image from being clipped.
N OTE : This option is available in Windows printer drivers or Command WorkStation and
Spooler.
N OTE : This option is effective only for jobs in which Layout is set to 1-up.
N OTE : The maximum value for both X and Y axes is 999.99 points/13.88 inches/352.77 mm.
4 To align front and back images proportionately, select Align front and back images.
Scale
The operator can specify a scaling override, but the override is applied to any scaling value
already set in the active job. For example, if a user sends a job with a scaling value of 50% and
the operator specifies a Scale override of 200%, the job is printed at 100% of the original
document size, that is, 50% of 200%.
27
INDEX
INDEX
A
B
Back Cover option 10
Black Detection option 10
Black Overprint option 10
Booklet Maker Option 21
Booklet Maker option 11
Brightness option 11
C
Centering Adjustment 23
Centering Adjustment option 11
CMYK Simulation Method option 11
CMYK Simulation Profile option 11
Collate option 11
Color Mode option 12
ColorWise Pro Tools
job overrides 8
Combine Separations option 12
Copies option 12
Create Master option 12
Creep Adjustment option 12
D
defining
Image Shift 26
Duplex option 12, 24
F
Front Cover option 13
G
Gang-Up - Double Print booklet setting 22
Group Name field 13
Group Password field 13
H
Hole Punching 13
J
job overrides
Auto Trapping option 10
Back Cover option 10
Black Detection option 10
Black Overprint option 10
Booklet Maker option 11
Brightness option 11
Centering Adjustment option 11
CMYK Simulation Method option 11
CMYK Simulation Profile option 11
Collate option 11
Color Mode option 12
Combine Separations option 12
Copies option 12
Create Master option 12
Creep Adjustment option 12
Duplex option 12, 24
Front Cover option 13
Image Quality option 13
Imposition Reduction option 13
Media Type option 15
Mixed Media option 15
Orientation option 16
Page Size option 16
Preview Master option 16
Print Master option 17
Print Mode option 12, 17
print settings 8
Print Size option 17
Printer Screen Mode option 17
28
INDEX
R
Rendering Style option 18
RGB Separation option 18
RGB Source option 18
RIPping 6
Rotate 180 option 18
Notes field 15
O
Orientation option 16
Output Profile option 16
overrides, of job settings 8
P
Page Size option 16
PCL printer description files, see PDDs
Perfect booklet setting 22
PostScript printer description files, see PPDs
PostScript printer drivers
explained 6
PPDs (PostScript printer description files)
options 8
Preview Master option 16
Print Master option 17
U
Units option 20
Use Master option 20