Académique Documents
Professionnel Documents
Culture Documents
iRange Technology:
Calibrated Thresholding - separate
threshold per metre of cable
Software Segmentation - optimized
sensor performance
Software Zoning - up to 50 zones per
processor, easily adjusted
Pinpoint Target Location - 1 metre
(3.3 ft.) accuracy, improved assessment
Precise Diagnostics - locate faults and
sources of nuisance alarms
Simplified Installation - fewer
constraints, cable plough possible
Sensor Features:
Enhanced Diagnostic Tools - using UCM
OmniTrax is the fifth generation, covert
outdoor perimeter security intrusion detection sensor that generates an invisible radar
detection field around buried sensor cables.
If an intruder disturbs the field, an alarm is
declared and the exact location of the intrusion is identified.
Targets are detected based on their
conductivity, size and movement. Smaller
targets, such as small animals, do not meet
the minimum requirements and are ignored.
OmniTrax operates through vegetation such
as grass, bushes and trees. OmniTraxs
digital processor easily filters out common
alarms caused by environmental effects such
as wind, rain, snow or blowing debris. As
a result, OmniTrax has an extremely low
False and Nuisance Alarm Rate (FAR/NAR)
and maintains a very high Probability of
Detection (Pd).
Sensor Technology
Auxiliary
Device
Sensor
Processor 3
Network Power
Auxiliary
Sensor
Fiber Optic or
RS-422 Data
Cable x 2
Sensor
Processor 2
Zone 5
silver network
Zone 11 to Zone 13
Zone 6 to Zone 10
Sensor
Processor 1
Control Gate
Access
UCM
(On a PC or laptop.
Optionally UCM can be
on the same PC as StarNeT)
Lead-in
Cable
OmniTrax Network
Sensor
Processor 4
Zone 2
to Zone 4
Zone 16 to
Zone 18
Zone 1
Network
Interface
Unit
(NIU)
Zone 14 to
Zone 15
Non-Reporting
Segment
SC1 Sensor
Cable
StarNeT 1000
with Silver Network Manager
(On a PC)
Zone 20
USB to USB
Cable
Fiber Optic or
RS-422 Data
Cable x 2
Zone 19
UCM
(On a PC or laptop)
NOTE: This diagram is for illustrative purpose only and should not be used for site planning or installation.
Performance
ISO 9001:2000
CGSB Registered
Certificate 95711
Senstar-Stellar Corp.
119 John Cavanaugh Drive
Carp, ON K0A 1L0
Canada
Tel: (613) 839-5572
Fax: (613) 839-5830
info@senstarstellar.com
Silver Network
Processor Options
UNITED STATES
Magal-Senstar, Inc.
43180 Osgood Road
Fremont, CA 94539
Toll Free: +1 (800) 676-3300
Fax: +1 (510) 249-1540
mkt@magalsenstarinc.com
UNITED KINGDOM
Senstar-Stellar Limited
Orchard House
Evesham Road
Broadway
Worcs., U.K. WR12 7HU
Tel: + 44 (1386) 834433
Fax: + 44 (1386) 834477
senstaruk@senstarstellar.com
Packaging/Environmental
Power Requirements
LATIN AMERICA
EUROPE
Senstar GmbH
Riedheimer Str. 8
88677 Markdorf Germany
Tel: + 49 7544-95910
Fax: + 49 7544-959129
info@senstar.de
Senstar-Stellar is
represented by dealers
in over 75 countries.
www.senstarstellar.com
Copyright 2005. All rights reserved. Features and specifications are subject to change without notice. Senstar-Stellar, OmniTrax, Senstar, the Senstar-Stellar logo are registered trademarks and StarNeT is a trademark of Senstar-Stellar Corporation.
A4MM0112-001
Printed in Canada