Académique Documents
Professionnel Documents
Culture Documents
MSDS Code
2009 Morgan Thermal Ceramics, a business within the Morgan Ceramics Division of The Morgan Crucible Company plc
Description
Morgan Thermal Ceramics produces multi-grades of
insulating firebricks with limiting temperatures of use
ranging from 1100C to 1760C. Each grade is
formulated to meet specific thermal and physical
requirements.
Morgan Thermal Ceramics Insulating Firebricks are
made from high-purity refractory clays, with graduated
additions of alumina for the higher temperature products,
and a carefully graded organic filler, which burns out
during manufacture to give a uniform, controlled pore
structure.
Each brick is machined to precise tolerances on all six
faces.
Type
Features
Insulating firebricks
Classification Temperatures
From 1100C up to 1760C
Typical Applications
Recommended for use as a primary hot face refractory
lining or as back-up insulation behind other refractories in
furnaces, kilns, flues, refining vessels and heaters,
regenerators, gas producers and main, soaking pits,
stress relieving furnaces, reactor chambers and similar
high temperature industrial equipment.
Special Shapes
In addition to the standard brick sizes, Morgan Thermal
Ceramics Insulating Firebricks are available in premachined special shapes. The blanks for very large
shapes are formed by mortaring together two or more
slabs, the unique large sizes of these slabs ensuring the
least number of sections and joints in the finished article.
A Morgan Thermal Ceramics distributor will be pleased to
review your requirements.
www.morganthermalceramics.com
06:2011 Page 1 of 4
Insulating Firebricks
Low Temperature Series
TJM 20
TJM B4
TJM 23
JM 23
TJM B5
TJM 25
1100
1200
1260
1260
1300
1350
500
800
500
480
800
800
0.8
2.0
1.0
1.2
2.0
1.8
0.7
1.2
0.7
1.0
1.2
1.2
Main Properties
Classification temperature (C)
-0.5
1170C
-1.0
1230C
-0.2
-0.2
1300C
-1.0
1350C
Reversible linear thermal expansion (max) %
-0.5
0.6
0.7
0.6
0.5
0.7
0.7
0.1
0.2
0.1
0.1
0.2
0.1
0.7
0.15
0.20
0.15
0.20
0.20
400C
0.18
1.24
0.18
0.12
0.24
0.25
600C
0.22
0.30
0.22
0.14
0.30
0.28
800C
0.27
0.17
1000C
0.32
0.19
CO Attack (ASTM C288-78) : Zero popouts were observed after 200 hours
Chemical Composition % (tr = trace)
AI2O3
45.0
45.0
45.0
37.0
45.0
50.0
SiO2
50.0
50.0
48.0
44.4
48.0
45.0
Fe2O3
1.0
1.0
1.0
0.7
1.0
0.9
TiO2
1.2
CaO
15.2
MgO
0.3
1.0
1.0
1.2
1.1
1.0
1.0
Na2O + K2O
The values given herein are typical values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
They are supplied as a technical service and are subject to change without notice. Therefore, the data contained herein should not be used for specification purposes.
Check with your Thermal Ceramics office to obtain current information.
www.morganthermalceramics.com
06:2011 Page 2 of 4
Insulating Firebricks
High Temperature Series
Main Properties
JM 26
TJM 26
JM 28
TJM 28
TJM 29
JM 30
JM 32
1430
1430
1540
1540
0580
1650
1760
800
800
890
900
1100
1020
1250
1.6
2.0
2.1
2.5
3.0
2.1
3.5
1.5
1.8
1.8
1.8
2.0
2.0
2.1
-0.2
-0.5
1510C
-0.4
-1.0
1550C
-1.0
1570C
1620C
-0.8
1730C
+0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.1
-
0.2
0.3
0.1
0.2
0.2
0.1
0.1
0.5
0.2
0.28
0.32
0.36
400C
0.25
0.29
0.30
0.33
0.38
0.38
0.49
600C
0.27
0.32
0.32
0.34
0.41
0.39
0.50
800C
0.30
0.35
0.34
0.37
0.40
0.51
1000C
0.33
0.39
0.36
0.41
0.41
0.53
1200C
0.35
0.43
0.38
0.46
0.42
0.56
1400C
0.60
CO Attack (ASTM C288-78) Zero popouts were observed after 200 hours
Chemical Composition % (tr = trace)
AI2O3
58.0
55.0
67.1
64.0
70.0
73.4
77.0
SiO2
39.1
41.0
31.0
32.0
28.0
25.1
21.5
Fe2O3
0.7
0.9
0.6
0.7
0.7
0.5
0.3
TiO2
0.1
0.1
0.1
tr
CaO
0.1
0.1
tr
tr
MgO
0.2
0.1
tr
tr
Na2O+K2O
1.7
0.9
0.9
0.8
0.7
0.9
0.9
The values given herein are typical values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
They are supplied as a technical service and are subject to change without notice. Therefore, the data contained herein should not be used for specification purposes.
Check with your Thermal Ceramics office to obtain current information.
www.morganthermalceramics.com
06:2011 Page 3 of 4
Insulating Firebricks
High Temperature Series
Main Properties
TJM C1
TJM B6
TJM C2
TJM B7
1300
1400
1400
1500
1000
800
1100
900
3.5
2.0
4.0
3.0
2.1
1.8
3.0
2.5
-0.5
1400C
-0.5
-0.5
1500C
-1.0
0.7
0.7
0.7
0.8
0.1
0.3
0.2
0.2
200C
0.24
0.28
0.30
0.32
400C
0.30
0.29
0.32
033
600C
0.34
0.32
0.34
0.34
AI2O3
45.0
5.0
57.0
64.0
SiO2
49.0
41.0
38.0
32.0
Fe2O3
0.9
0.9
0.9
0.8
Na2O + K2O
1.0
0.9
1.0
0.8
CO Attack (ASTM C288-78) Zero popouts were observed after 200 hours
Chemical Composition % (tr = trace)
Standard
Length
230
Width
114
Thickness
65
The values given herein are typical values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
They are supplied as a technical service and are subject to change without notice. Therefore, the data contained herein should not be used for specification purposes.
Check with your Thermal Ceramics office to obtain current information.
www.morganthermalceramics.com
06:2011 Page 4 of 4