Académique Documents
Professionnel Documents
Culture Documents
SENA
MEMBERS
Luis Felipe Garca
Marcela Bonett
Flor caro vega
Pedro Nues
INSTRUCTOR
Alfonso Caro
BOGOTA D.C
MAYO DEL 2011
Conceptualization
Software
It is a generic term for the programs that run inside of a computer. In this case
possibly Windows operating system or operating programme that gives life to your
computer, as well as you can now see this information on your screen.
Hardware
It is commonly used for the physical components of a computer or a computer. This
is the most basic level on which the computer runs. The dominant to remember is
that the information is processed electronically by the hardware. The pc is
prepared as a computer or personal computer. The monitor, keyboard, and mouse
(parts of your hardware) are connected to the system unit.
Multi-user: allows two or more users to use their programmes at the same
time. Some operating systems allow hundreds or thousands of users at the
same time.
2. Multiprocessing: supports opening the same program on more than one
CPU.
1.
3.
4.
Multitramo: allow various parts of a single program to run at the same time.
5.
that the program is actually harmless, but has been manipulated to include
software spy as it was the case of a version of the Kazaa. We can also be affected
by these programs when we browse on the Internet with low security or if we
accept any request that comes from a site. There are pages which tend to be quite
insistent when we press the "No" to deny the request; These are usually the most
dangerous.
Anti-spyware is known as the best and Google includes the trial version in the
Google Pack. He has received numerous awards from leading computer
publications (PC Word, PC Magazine, PC Pro, PC Plus, PC Authority, PC
Utilities, PC Advisor, PC Choice, Microdatorn, competence Bild and PC
Answers Magazine) and around the world testing laboratories highlighted it for
their qualities.
Preventive Maintenance
Preventive maintenance is the periodic revision of certain aspects, both hardware
and software on a PC. These influence the reliable performance of the system, in
the integrity of stored data and an exchange of accurate information, to the
maximum possible speed within the configuration optima system.
Preventive maintenance in general dealt with in the determination of operating
conditions, durability and reliability of a team, in reference to this type of
maintenance helps to reduce the time that can be generated by corrective
maintenance.
OBSERVATION
Most of the failures come from layers of dust that accumulate in the internal
device which causes overheating and gives as a result the damage of the
component or that her plots are encouraged.
Corrective Maintenance of a Computer
Corrective maintenance is done when it is necessary to correct or repair any
problem that is going on in the PC which can be software or hardware respectively.
Corrective maintenance of software is to correct a problem either programs or the
operating system. When need to replace a mouse, keyboard, source of power,
speakers, memory card, motherboard or expansion or in the latter cases should be
a small welding is speaking of corrective maintenance of hardware.
Preventive maintenance
It is recommended to perform a maintenance every 6 months if the computer
equipment is not widely used either every 4 months if this constantly is in use. But
it is very important to do it every 2 months if the PC is used every day, more so if
the Internet network is used constantly.
Whenever the use of a PC is at risk of that will break down a card, Mouse, or any
part of the Pc. But also where there are likely to find more problems that harm the
PC is on the Internet because that's where unintentionally it can infect any
computer with a virus of any kind and that hampered the proper functioning of any
computer equipment.
What does the preventive maintenance
Preventive maintenance can detect failures repeated, decrease the points killed by
stops, increase the useful life of equipment, lower costs of repairs, detect weak
points in the installation from a long list of advantages. Including common
peripherals e.g.: CPU, mouse, etc.; as well as keep it free of pollutants such as
liquid, powder.
OBSERVATION
Many times the processor is clean, so is not recommended to remove it, since in
some cases the pins may bend or break easily. Between the processor and the
heatsink, there is a thermal paste which should not touch or remove because the
lack of this means that the processor is hot. In any case the only thing that could
clean up serious fan and the heatsink without remove the processor and remove
the paste attached to the heatsink.
Maintaining external
Follow these steps
(apague_el_monitor_y_el_computador,_2) unplug the monitor from the wall
outlet, 3) clean with a soft bayetilla screen and Cabinet, if it is necessary to use
a blower.
Housekeeping
Follow steps 1 and 2 of the previous maintenance
Observatin
is necessary to have a blower or a can of compressed air
It
DIMM
SIMM
only necessary to introduce all DIMM modules in the same bank of slots. Or they
can exchange data with the bus through two simultaneous channels, one for each
bank.
RAM
2y3
The use of the defragmented is very simple, in "My PC or team" where it has
your disk drive to the right (D) and partitions (if you have them), in the example
would be (C). It will mean is desfragmentara the drive C.
We're going to "Properties" and give you left click, get out a table of dialogue
What will be the first thing you should do is to select the partition (we had said that
we will do it on (d) and we are first going to "Analyze" to inform us whether it is
necessary or not defragmenting, so is to click on the button and begins to analyze).
From there it can click on "Defragment" (to avoid having to return to the previous
screen)
There are many white and red vertical lines which means respectively I have many
"spaces" between sectors and many "fragmented files" over D, so what will the
defragmented is logic: try to put everything together so that all sectors (or most) in
blue-displayed must be taken into account that green spaces are fixed so it will
remain there (are always system).
After several minutes (which will vary
according to the power of your PC), will be a message saying that the
defragmentation has been completed:
If you click on the button defragment begins the process and displayed on the bar
of estimated disk usage after defragmentation displays the disk's status during the
defragmentation process, which will vary as the process advances
Conclusions
Once we have finished the process, our hard disk is again in perfect conditions of
work and we can enjoy it. We must bear in mind that it is appropriate to perform on
a regular basis, at least the analysis to verify the degree of defragmentation of your
hard drive, especially when we have subjected to continuous operations of
recording files, more so if these files are large and deletion, as RAW type, is the
case in the editing processes of video or images in high resolution formats or any
program that uses files large and with many operations of reading / writing.
How to install the operating system Windows xp
It must be done without loading the entire operating system. To this end, a startup
with an operating system disk is used. The steps to perform are. With the pc
turned off, insert the disk OS, in the CD - ROM drive home and later, with the CD
and released, turn on the pc. So the first thing we do is go to the BIOS Setup, to
get our Windows installation CD to start once we turn our PC and place the
installation
CD
in
the
CD/DVD
drive.
To enter the BIOS Setup by pressing Delete, F2 or F11 (depending on the model of
motherboard) turn anything else on our PC.
Look for the Advance Bios Features option in the BIOS Setup and press ENTER
on this option.
We will post the following: First Boot Device CD-ROM, Second Boot Device - HDD-
We return to the previous menu and select Save & Exit Setup and accept with
ENTER.
Note: The settings of the Setup can change from one to another. In other BIOS
boot sequence is in the section Boot Secuence instead of being included in
Advance Bios Features. With the CD-ROM in the CD/DVD drive-restart the
computer to start the installation of Windows XP will appear a message press any
key. The installation will begin to copy files and to start devices, we will wait.
When we get to this point in the installation press ENTER to confirm the installation
of Windows on a hard drive.
It will then show us the license of Windows that we accept pressing F8 to continue
installing Windows XP.
We will now prepare the hard disk to install the Windows XP files.
partition if any and eliminate by pressing D.
Select a
Below is presented the space not partitioning that will be similar to the volume of
the partition you just delete. Press C to create the partition, and will accept the
confirmation with ENTER.
In this new screen select a quick NTFS disk format and press ENTER.
If we have any suspicion of failure on the disk is better not to use the option of
formatting fast and do a normal formatting. This will take us much longer, but will
check us the integrity of our hard drive (at least in the partition, which is the most
important).
Then the partition is formatted, the basic files will be installed and automatically
restarts the computer as shown in these images. While we wait without pressing
any key.
1
* Now the installation will continue to be graphic and more easily.
We will leave to follow the course of the facility waiting to be required to introduce
configuration options.
Enter the details of language and geographical location when we see this screen.
We then ask the name and the Organization to which we belong. We fill the data
and click Next.
Then ask us to introduce the key to our Windows, introduced once click Next.
We must now give a name to your computer, the default is fully valid even if we can
get one that is easier to remember. We will also write an administrator password to
provide greater security for our team.
Once complete click Next.
The following is to adjust the date and the hour of our system, as well as the time
zone where we are.
After
completing
this
process
click
Next
again.
When we get to this screen, enter the network settings. If we do not have a
network at home or do not know the parameters of the network, we will leave the
values
by
default
and
click
Next.
From this point the installation will continue with copying files. Now the computer
will reboot, and we should not press any key, so that it will not boot from the CD.
The installation will ask us the latest configuration data. Configure the screen
accepting all the menus that appear.
1.
2
We accept the first display of completion of the installation of Windows XP. We
omit the check of the Internet connection.
This screen is to activate your copy of Windows. If we are connected to the Internet
(by a Reuter) choose the option Yes, activate Windows online now. Otherwise
select No, reminded me in a few days.
Then enter the user names of people who will use the equipment.
Note: This step is very important for a correct configuration of the computer, it is at
this point that is going to define the user that will make the functions of
administrator (the first to say). The omission of this point is one of the main causes
of subsequent failures of the system.
and
the
total
detection
of
the
vast
majority
of
threats.
WARNING
Do not perform this procedure but previously known steps and measures of
protection.
But if the source with this test if it works and even turn on the computer
clean connections with clean contacts and check that the switch has good your
connection depending on the map of the main board and if bad her connect this
possibly make it work but if it is good to check the main board is perhaps damaged
processor or any other part of the main board because this fix will correspond an
electrical engineer.
DA NO VIDEO EQUIPMENT
the monitor turns on but this this black screen, look at electrical installations again
as with the previous problem I look also to the video connection this well both the
monitor and the Tower if they are well can try the monitor on another tower to rule
out that it is the monitor that does not give video if it works normally with another
Tower I rule out that it is the monitor and I focus on the tower to review it I
disconnect all external connections of the monitor and the Tower already
disconnected remove the screws of the lids and open the Tower check the video
card probandola in another Tower if it doesn't work is that this damaged the video
card and If it is so simply change by one serving.
But if the screen appears in calculus is with colors running only look at the video
cable connections and if the pins are damaged either by that were twisted or
parties can cause me this damage and opened that change it.
NOT FOUND THE OPERATING SYSTEM
It may be because perhaps no operating system installed or that the hard disk is
damaged or there is any damage file systems within the system operating this I
must then remove the hard drive and can be in another Tower putting it as a slave
and so make a backup of the information that is in This what formatting and I
connect again to the Tower initial changing it again to master and install the
operating system.
possibly the mouse disconnected and the system does not recognize this
peripheral or possibly the PS/2 pins are twisted if they are twisted can straighten
but if they are parties to change the mouse but if the problem is already in the main
board you must install a USB card to mouse but if they are well connectors I test
on another computer then I come to connect the mouse and reboot the system so
that it recognizes, but does not work if you can right-click this dirty in such a way
remove you the screws of the party less I open and so clean clean contact and
again it to join and if it doesn't already It is problem or it mouse or its connector we
would have to change it but not to repair it.
Or for a more simple than the mouse case this good but that monitor the cursor
does not move should be also because this has locked up and it can be solved by
pressing CTRL and 5 option appears administrator tasks to give click there get me
this Windows.
I would like to end task, and this close me the program that I have blocked the
cursor this may be another possible problem with solution.
possibly the keyboard this disconnected and the system does not recognize this
peripheral or possibly the PS/2 pins are twisted if they are twisted can straighten
but if they are parties to change the keyboard but if the problem is already in the
main board you must install a USB card keyboard but if they are well connectors I
test on another computer then I proceed to connect the keyboard and reboot the
system so that it recognizes, but if it does not work it may be that harm will come of
the membrane or card and these parties must change if it is not the case and their
internal parts are fine but the problem persists can be that the keyboard this dirty in
such a way remove you the screws of the party less I open and so clean clean
contact and again it to join and if it doesn't already a problem or keyboard and its
connector We would have to change it but not to repair it.
dirt is done with blower and cleaning with a CD of cleaning and a bit of isopropyl
alcohol (to recognize a cleaning CD this comes with) a small brush which is
impregnated with alcohol and this makes you clean the CD-ROM CD-WRITER or
DVD-ROM drive.
These common failures are continuously presented to users, was solved by
means that questions were technical support Ilyich Mauritius antolinez
Interviews
INTERVIEWS with users of the capacity of bogota d.c
LABORATORY TOOLS HERRAMIENTAS DE LABORATORIO
description of the support: the printer does not work does not print it
solution provided: checked the brand of the printer and the ip address
that is the port that is using the other computer for printing and look in
the computer effectively does related such way is configured the printer
to the computer and both wanted the (IP) port and are looking for the
printer are send a test print and is functioning normally
extension:466
Case No: 3
extension:106
Case No:5
extension:131
Case No:11
solution provided: makes a copy of the Word file and sticks in an open
office file.
Unit: jurisdictional
extension:296
Glossary
Computers are composed of a series of electronic components that are
responsible for their proper functioning. These include
Central unit of processes (CPU): is the brain of the pc. He is responsible for
processing instructions and data that the computer works. The processor is the
most important device and which most influences his speed to analyze information.
Memory RAM or main memory: is the random access memory, stored instructions
and data for programs to ensure that the CPU can access them directly through
the external high speed data bus.
The RAM is known as a read/write memory, to differentiate it from the ROM. It is
said that in the RAM, the CPU can write and read. For this reason, most of the
programmes allocated part of the RAM as a temporary space for storing data,
which allows to rewrite. As it does not retain its contents, turn off the computer it is
important to save the information.
The amount of RAM memory rather influences the speed of a pc. Among more
memory RAM you have, faster work and more programs may have open at the
same time.
Memory ROM: it is the memory only for reading. It is the part of the main storage
of the computer that does not lose its contents when power is interrupted. It
contains essential programs of the system that the computer or the user can be
deleted, as those that allow you to start the operation every time you turn on the
computer.
Memory ROM: it is the memory only for reading. It is the part of the main storage
of the computer that does not lose its contents when power is interrupted. It
contains essential programs of the system that the computer or the user can be
deleted, as those that allow you to start the operation every time you turn on the
computer.
Hard drive: is the device of secondary storage that uses
multiple hard drives of a magnetically sensitive material. It is
housed, together with the heads of reading in a sealing
mechanism in hermetic manner, which saved programs and all files created by the
user when working with these programs. Between more ability to have a disk hard,
more information and programs can be stored on your pc.
The capacity of the hard drive is measured in gigabytes (GB). A GB equals 1,024
megabytes (MB) for approximate mind.
Cache: is a small unit of ultrafast memory which stores information that has been
accessed recently or that are accessed frequently, which prevents that the
microprocessor has to retrieve this information from slower memory circuits.
The cache is usually located on the motherboard, but sometimes it is integrated
into the processor module. Data storage capacity is measured in kilobytes (KB).
While more cache has the computer it is better, because you will have more
instructions and data available in a faster memory.
Motherboard: is circuit board containing the processor, or CPU, RAM,
microprocessor support chips and expansion slots. These are those that allow
insert, for example, the sound (which allows the pc to play sound), the internal
modem (which makes it possible to surf the internet) or the graphics card or card
video (which allows to display images on the screen).
CD-ROM: this unit is used to read CDs, whether these programs, music or
multimedia (sounds, images, texts), such as encyclopaedias and video games. The
speed of this unit depends on two factors: the rate of data transfer and access
time.
Data transfer rate refers to the amount of data that the unity of CD - ROM can send
to your pc in a second. This rate is measured in kilobytes per second (kbps) and
indicated with a number next to a x, e.g.: 16 x, 24 x, 48 x. While more x, faster.
Access time refers to it takes the entire process.
CD drive: this drive reads and writes on CDs. These discs are used to save and
read information, but in contrast to the hard disk, which is fixed inside the pc, can
enter and get out of the unit, so enable transporting data from one side to another.
The CD's have a very high capacity for data storage.
The essential data entry tools are called input devices: input devices incorporate
the information into the drive of the pc system.
Keyboard: it is an input device consisting of a system of keys, such as the of a
typewriter, which allows input data the computer or digital device.
When you press a character, an encrypted entry is sent to the computer, which
then shows the character on the screen. Numeric keypad refers to the set of keys
with numbers in the right hand side of some keyboards.
The keys on the keyboard of the computer are usually classified follows:
Special keys: function keys, control keys, arrows, key caps, among others. Mouse /
mouse: piece of hardware connects your computer to help you control the
movements of the cursor and the ability to handle objects on your screen. It allows
navigation in an easy and convenient way.
A positive point of this hardware is that it works perfectly with any of the types of
computer that are on the market today. It is difficult to see any incompatibility
changing mouse/mouse, whatever the brand of a system to another.
The function main mouse, "mouse" is find or organize information with the
left hand side. The right side presents several options, such as copy, paste
or cut.
GOALS
Institutional
That the manual will be implemented and works for the technical support
area.
Staffs
OBJECTIVES
General
2) A wrist strap.
3) A small soft brush.
4) Catton swab.
5) A blower or "blower.
6) Pieces of fabric dry.
7) A disk cleanup.
8) Isopropy Alcohol.
9) Clean spray contacts.
10)Silicone lubricant or White fat.
11) Oil-3 IN - ONE.
12)A draft.
As well as experience in the area of systems, there are other air which should
know because they used in the maintenance of computing.
The electronic management (electricity)
Customer service
Cleaning
Mechanics
Below are the procedures which had and should take into account when
making the maintenance of the Pc
Time in
minutes
2
25
seconds
25
seconds
3
30
seconds
Place the pc in a proper way so it can be disassembled
20
seconds
Remove or disconnect the source of power of the main board, CD-ROM, hard 4
drive, Floppy drive
30
seconds
1
Blow out the source of power, placing him an element to the fan to prevent
damage or to turn
Destornillar along with the heat sink fan if necessary.
There are some 4
that are under pressure
Remove the heatsink of the mainboard, avoiding damage to the processor and2blow it with
the
sopladora(asegurar_el_ventilador_con_un_elemento_que_no_permita_las_revoluciones_de
el_ventilador)
Now to remove the processor if you want to. Remove the insurance that keeps 1
pressure
Remove the processor using latex gloves if necessary, if not you think it 2
appropriate to not remove the processor
Place the processor in a safe place in case an antistatic element
Remove video, internet RAM memories graphics cards
20
seconds
6
Remove units
Clean the elements removed from the pc as a hard drive, unit of CD - ROM floppy with a can of foamy unit and if it is necessary to use the blower.
Clean up as RAM - internet sound cards and others with a can of compressed
air or blower
Clean up the entire interior of the tower with a blower avoiding contact with the
powder
Clean the outer part of the tower with sparkling
Cleaning cables as the zata - data - cables power buses and others in general
Reassembly
10
When it is inserted each element and verified that if they agreed, is feeding
voltage the mainboard, fans and units that is connecting the cables from the
power source.
5
5
3
82.30
3- You can choose in the form of releasing disk space windows as the
Liberator search in the drive you have selected the temporary files, internet
cache files, and unnecessary files that can be removed safely.
Do not move or hit the CPU while it is turned on. We must remember that the
que el disco disk hard is girado constantly, like the floppy drive or CD-ROM,
and can cause a failure of any of them. In the same way, carefully move the
CPU on the move, because we can disengage some cards or connection
internal.
Clean up every time the keyboard, mouse, printer, removing dust and stains,
according
to
the
manufacturer's
instructions.
The only connection that can connect and disconnect from a switched on PC
is the USB. For the rest, shut down always the computer and the peripheral
connect,
making
it
turn
then.
Used to be a current peaks filter, which protect us from overvoltages by
failures in the power supply. Such devices have aspect of "multiple space" and
they
are
relatively
affordable.
During the installation of cards or components inside the CPU, be
careful, and insert them without force. Before you place them, touch the
metal parts to download possible static electricity of our body, which
can damage the components. Verify that the cables do not prevent
proper cooling of the fans
Second Computing
RAM: 1 Kingston
MEMORY TYPE: DDR 400
VOLTAGE: 2.5
519
SL
ja
philippines
SOCKET: IFJ702
MAIN BOARD: as rock dual channel 77515g reference; fsb1066/esb800
PCI: 3 without a card number
AGP: if you have but no card
HARD drive: Hitachi size; 164 gb voltage; 5 490MA - 12V serial; z20po6ef
model; HDS721616 PLAT80
KEYBOARD reference: kb-0316 5v-50mA E-C012-03-Spain (B)
THE MOUSE reference: geniuses s/n 148655902046
REFERENCE drive: E-H012-03-0795 (B) 5V-960 mA Js hsm n50
REFERENCE DVD (ROM: model;) GSA-h42n serial; 701HBWB37345 5v/12v
1.5A/2.0A marks; LG
Third computing
RAM: 1 Kingston
MEMORY TYPE: DDR
VOLTAGE: 1.8
BUILDING SIZE: 2G
PROCESSOR: Intel 05E4600 Intel coreTM 2 Duo
2.40ghz/2m/8000gq812a22 SL 88f Philippines 75228303
SOCKET:
MAIN BOARD: as rock
PCI: 2 without a card number
SL
a94MALAY
Format for the recruitment and screening for the maintenance of hardware
RAM:
MEMORY TYPE
VOLTAGE:
CAPACITY
PROCESSOR:
SIZE:
SOCKET:
MAIN BOARD:
PCI:
AGP:
HARD DRIVE:
REFERENCE KEY:
MOUSE REFERENCE:
FLOPPY
REFERENCE:
DISK
REFERENCE DVD;(ROM):
Inventory of software maintenance
Maintenance of software as inventory is a total collection of programs (software)
containing the pc and general how by follows.
Control Panel
And you can see how the computer program contains in itself that will be the
general inventory
HOW TO MAKE A BACK-UP FOR FILES
every time you are going to carries out maintenance of some damage to software
or hardware that includes as such internal manipulation of the Tower hard drive is
very important to make a back up of the documents of the user which means that I
do a copy of the most important of the user documents so then both he and I do
not present disadvantages once the maintenance has been and is missing a file in
such a way this back up we can do in the following way:
Da double click will appear the folders of the number of users who use this PC in
such a way that search for the folder that the user indicated.
To give double click will appear documents that you have on your computer are all
and selected giving them copy either a CD or a USB memory or in such manner on
other removable hard drive in this way will be saving the files that most interest you
to the user.
When you are finished and the maintenance of the computer again on the local
drive.
Of which remove the folder of the user and finally in the final folder which is the
user where you got information either on the CD or the USB memory stick or
removable hard disk copiare where again the information there was user.
EQUIPMENT READINESS
Enlistment of equipment transfer and monitoring
Provided that it performs a preventive or corrective maintenance it is important that
we demarquemos the computer to review to avoid future problems.
To demarcate we use symbols, strike, or some kind of stamp as it is:
Technician
name
Time
Machine
model
Board
computer
Date
Procedure
was
performed
2- It sought the option RUN BENCHMARK and will click immediately began to
analyze the performance of your computer
3- He observed the progress that has thes software on the anlisis of the
measuremente of the maintenance.
Finally performance software to show the performance of your computer and if you
want to save this information only goes to save result.
appropriate driver. * Remove the lid of the computer, if the PC is mini tower lie him
to work with comfort and security. * Prior to remove any component, look carefully
at the inner part of PC, take note of the placement of the cards, when preventive
maintenance is completed put them in the exact place where the bag. * Once taken
notes small details appropriate to place the antistatic wristband to avoid damaging
any card.
* When to remove the card and it is found cleaning place it in an antistatic bag, the
same for all cards. It is recommended to not remove the hard drive,
microprocessor and power source. * The work table to be located in a right place,
to avoid the risk of falling components removed from the Cabinet (cables,
expansion cards, * an adequate lighting is essential to see the areas to be
cleaned)along with a better identification of the components of the computer to
avoid confusion at the time of connect the different cables inside the system. Be
cautious with the management of the screws of the system in time to disarm it. The
screws are not designed for all points. It is very important to differentiate well those
who are short of the medium and long. For example, if a long screw is used to
mount the hard drive, there is a risk of damaging the card internal it is better to
store screws in a single place, others classify and others ordered them as it is
disarming to then train them in reverse order at the time to assemble the team.
And finally our final proof of performance demonstrating that our preventive
maintenance if it is right and we can have a better performance of the
machine
Express and Diners. You enter the card details and we charge the amount.
2. By bank transfer or check. Transfer money to our account or send a
check for the invoice value. The account number for transfer can be found in
order confirmation. If you choose to check, please use the address below.
After confirmation of payment for their part, we will send your computer
equipment.
If you have any questions regarding payment methods, you can contact us
at luis910509@hotmail.com. We will respond with pleasure.
WARRANTIES AND POLICIES
This warranty policy only covers the original installed parts that make up the
team (original model configuration).
Coverage of labor and work specified in the warranty document is subject to
the type and model of PC.
Coverage of original software is preloaded on hardware devices with more
than one year, the software system have a duration of 30 days from the date
of commencement of warranty period.
It is important that the customer has on hand a copy of the invoice
Have none of these documents will be requested the exact date computer
repair, as this is a prerequisite to apply for a share.
According to the models of each computer has, the warranty terms and
conditions described in the policy of product on the side of the document
signed by repairing your PC or laptop.
Processing of Warranty
Repaired equipment failure must submit the following procedure so that your
warranty will be served:
Through a toll-free customer must report the failure of his machine at No
3203032554.
A representative of the company's Technical Support will assist you and help
to detect the failure of your machine.
If your phone can not resolve the impasse, the representative shall assign a
case number and an authorized center.
Different models and it is concluded that there are different types of
warranty.
There are teams that according to your policy have the following warranty
period:
Hosts: count with 03 year warranty covering labor and parts as indicated by
your policy and attendance is close to the case.
Desktop computers - Tower: These are computers that have 01 years
warranty on labor.
The customer and the warranty of the battery are also 01 years.
Laptops as indicated by the policy have a warranty of 2 years of work and
part but becomes effective the client must take the equipment to Dealer
CONCLUSIONS
The opportunity to analyze a wide variety of equipment with different
problems has allowed a broader view of what is really to preventive
maintenance. This in turn has helped to gain new knowledge and enhance
knowledge to those who already had, has had the opportunity to clarify
many doubts that in theory were not always easy to understand, but in
practice they are much more understandable.
Whole mechanism is known in the implementation of software and
hardware maintenance.
The opportunity to implement what they have learned to acquire new
knowledge society of other preventive maintenance of an efficient support
for any technical problems.
Has allowed a broader view of what is really to preventive maintenance.
GLOSSARY
Computers are composed of a series of electronic components that are
responsible for proper operation. These include
central processing unit (CPU) is the brain of the pc. Responsible for
processing instructions and data that the computer works. The processor is
the device most important and most influential in their speed in analyzing
information.
RAM or main memory: the random access memory in which instructions
and data are stored programs for the CPU can access them directly through
the external data bus speed.
The RAM memory is known as read / write, to differentiate it from the ROM.
This means that in the RAM, the CPU can read and write. Therefore, most
programs use part of RAM as temporary space to store data, which allows
rewriting. As it does not retain its contents, turning the computer is important
to keep the information.
The amount of RAM enough influence on the speed of a PC. The more
RAM you have, the faster work and more programs can have open at once.
Memory ROM: read-only memory. Is the main storage of the computer that
does not lose its contents when power is interrupted. It contains essential
system programs that neither the computer or the user can delete, such as
those that allow you to start running every time you turn on the computer.
Hard disk: the secondary storage device that uses multiple hard drives
covered in a magnetically sensitive material. Is housed, along with the read
heads in a hermetically sealed mechanism, which are stored programs and
all files created by the user when working with these programs. The more
capacity you have a hard disk, information and programs can be stored on
the PC.
Hard disk capacity is measured in gigabytes (GB). One GB is equal to 1,024
megabytes (MB) about mind.
Cache is a small unit superfast memory that stores information that
recently accessed or that is frequently accessed, thus preventing the
microprocessor will need to recover this information from slower memory
chips.
The cache is usually located on the motherboard, but sometimes it is
integrated into the processor module. Their data storage capacity measured
in kilobytes (KB). While the computer has more cache is better, because you
have more instructions and data in a faster memory.
on the left side. On the right side are several options such as copy, paste or
cut.
REFERENCES
http://www.mailxmail.com/curso-mantenimiento-ordenadores/quesirvemantenimiento
http://www.cedecap.org.pe/uploads/biblioteca/archivos_grandes/Mantenimie
ntoPreventivoCorrectivoDePCs.pdf
http://es.wikipedia.org/wiki/Mantenimiento_preventivo
http://foros.rincondelvago.com/seguridad/mantenimiento-preventivo-ycorrectivo
http://jonathanquinatoa.blogcindario.com/2010/07/00004-mantenimientocorrectivo-de-computadoras.html
Corrective Maintenance of a Computer
http://mx.answers.yahoo.com/question/index?
qid=20110112094435AA9MvE0
http://jose123.securesites.net/tareasya/index.php?
option=com_content&view=article&id=5428:Mantenimientopreventivo&catid=902:Aprende-algo-% C3% Batil-today-Education% C3%
B3n-para- the-job & Itemid = 332
http://articulosgratisenlinea.com/articulos/c% C3% B3mo-remove-oneprocessor-de-la-computadora.html
http://www.google.com/search?
um=1&hl=es&biw=1359&bih=582&tbm=isch&aq=f&aqi=g10&oq=&q=soplad
ora
http://www.geeksxd.com/vb/tutoriales-boletines-ebooks/148-tips-delimpieza-del-monitor-y-limpieza-del-mouse.html
http://es.wikipedia.org/wiki/DIMM http://es.wikipedia.org/wiki/SIMM
http://es.wikipedia.org/wiki/Double_Data_Rate
http://www.repararpc.info/2009/10/herramientas-que-se-usan-al-repararuna.html
http://es.answers.yahoo.com/question/index?
qid=20090511074406AAssGxA
http://www.configurarequipos.com/doc327.html
http://www.taringa.net/posts/ebooks-tutoriales/1821351/Como-limpiar-uncpu.html
http://www.monografias.com/trabajos30/mantenimientocomputador/mantenimiento-computador.shtml
http://www.elwebmaster.com/articulos/como-limpiar-adecuadamente-elinterior-de-tu-pc
_____________________________________________________
SYSTEMS TECHNICAL GROUP
2011