Académique Documents
Professionnel Documents
Culture Documents
T
his cloning software is designed to perform data
entry, setting and cloning for the IC-F3162D/
F4162D(T/S) VHF/UHF dPMR HANDHELD TRANSCEIVERS,
or IC-F5062D/F6062D VHF/UHF dPMR MOBILE TRANSCEIVERS.
D HELP WINDOW: CS-F3160/F5060(dPMR) has a
help window to describe functions and operation.
INSTRUCTIONS
CLONING SOFTWARE
CS-F3160/F5060
(dPMR)
System requirements
NOTE:
When using the OPC-966/1122, RS-232C type cloning
cable, select Normal for the cloning speed setting in
[COM port] menu of the cloning software. Otherwise, a
cloning error may occur.
When using the OPC-966U/1122U, USB type cloning cable, you must install a USB driver. The driver is
supplied with the OPC-966U/1122U. See the OPC966U/1122U instruction manual for details.
This instruction manual is described using Microsoft
Windows Vista.
For IC-F5062D/F6062D
Optional OPC-1122 CLONING CABLE (RS-232C type) or OPC1122U* CLONING CABLE (USB type)
Software installation
When installing the software, log on as the administrator.
q Make sure Windows has completed its start-up, and no
other applications are running.
w Insert the CD into the CD drive.
e Double-click the setup.exe contained in the CD.
y Choose Destination Location appears, and then click
[Next>].
Click
Example :
Click
Connections
All cloning operations are performed from the PCs keyboard.
For IC-F3162D/F4162D(T/S)
q Connect the cloning cable as illustrated below.
w While pushing and holding [P0], rotate [VOL] to turn ON the transceiver.
to RS-232C port
D-sub 9-pin
female plug
PC
[VOL]
q
OPC-966U
(USB type)
to USB port
Attaching:
Attach the
connector cover
(q), then
tighten the
screw (w).
OPC-966
(RS-232C type)
r
[P0]
DB9 Female /
DB25 Male cable
Detaching:
Remove the
screw (e), then
detach the
connector cover
(r).
TRANSCEIVER
For IC-F5062D/F6062D
q Connect the cloning cable as illustrated below.
w Push [
] to turn ON the transceiver.
to RS-232C port
D-sub 9-pin
female plug
PC
OPC-1122U
(USB type)
to USB port
to the MIC
connector
OPC-1122
(RS-232C type)
]
TRANSCEIVER
DB9 Female /
DB25 Male cable
Programming information
We recommend that you should download all the transceivers data before entering/editing parameters, even
when the transceiver is factory fresh.
, or click [Clone] in the top menu of the cloning
Click
software and select Read <- TR, to start downloading.
Please refer to the help file of the cloning software for assistance with the functions or settings.
To open the help file, click [Help] in the top menu of the
cloning software and select Contents, or simply push the
[F1] key of the PCs keyboard.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany,
France, Spain, Russia and/or other countries.
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries.
All other products or brands are registered trademarks or trademarks of their
respective holders.
A-6843W-1EU
Printed in Japan
2010 Icom Inc.