Académique Documents
Professionnel Documents
Culture Documents
Support Highlights
32-bit
SDRAM
LPC1788
Parallel
NAND
32.768kHz
crystal
EthernetPHY
I2CE2PROM
Buffers
NXP Partner
Embedded Artists is a partner of NXP. Together we give engineers an excellent base to work
from when creating advanced embedded systems. We have a close co-operation and know
everything there is to know about the NXP processors. Take advantage of our unique knowledge!
For further information, please contact: support@EmbeddedArtists.com
Embedded Artists AB
Davidshallsgatan 16
SE-211 45 Malm
Sweden
Copyright 2011 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists
Rating
-0.5V to +3.6V
-0.5V to VDD+0.5V
-0.5V to +6.0V (see LPC1788 DS for details)
-40C to 100C
Stress above these limits may cause permanent damage to the board.
Technical Data
Parameter
Supply voltage (VDD to GND)
Ripple with frequency contents < 100kHz
Ripple with frequency contents 100kHz
Supply current
- idle, 32kHz RTC active
- low-power mode
- executing from internal flash (100MHz)
- executing from external sdram (100MHz)
- Ethernet+usb active
VBAT current
Operating temperature[1]
Relative Humidity (RH)
0C < TA 50C, non-condensing
50C < TA 60C, non-condensing
60C < TA 70C, non-condensing
[1]
[2]
Min
Typical
Max
3.10V
3.30V
3.50V
50mV
10mV
Max observed
TBD[2]
TBD[2]
TBD[2]
TBD[2]
TBD[2]
TBD[2]
TBD[2]
5%
5%
5%
80%
50%
35%
Extended temperature range can be supplied on request. Subject to minimum order volume.
Will be defined after a characterization process.
Mechanical Dimensions
Board width according to SO-DIMM standard: 67.6 mm.
Board height and depth according to picture below:
2.0 mm
Top side components
5.0 mm
2.0 mm
55.0 mm
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can
discharge without detection. Although this product features ESD protection damages may
occur on devices subjected to high energy ESD. Therefore, proper ESD precaution should be
taken to avoid performance degradation or loss of functionality.
Embedded Artists AB
Davidshallsgatan 16
SE-211 45 Malm
Sweden
Copyright 2011 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists
Pin Information
SODIMM
pins
1
2
3
4
5
6
7
8
9
10
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
Connected to
A, Ethernet TXP
A, Ethernet RXP
A, Ethernet TXN
A, Ethernet RXP
P, VDD3_3A
P, GND
OD, ETH-LED1
OD, ETH-LED2
P, VBAT-IN
O, RTC-ALARM
I, RESET-IN
O, RESET-OUT
NC
B, GPIO
O, TCK/SWDCLK
B, GPIO
I, TRST
B, TMS/SWDIO
I, TDI
O, TDO/SWO
P, V3A
P, VREF
P, VSSA
P, GND
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
P, VCC
P, GND
P, VCC
P, GND
A, USB1-DP
A, USB2-DP
A, USB1-DM
A, USB2-DM
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
Ethernet-PHY
Ethernet-PHY
Ethernet-PHY
Ethernet-PHY
Embedded Artists AB
Davidshallsgatan 16
SE-211 45 Malm
Sweden
Ethernet-PHY
Ethernet-PHY
LPC1788, vbat
LPC1788, rtc-alarm
LPC1788, rst-in
LPC1788, rst-out
LPC1788, P5.0
SPIFI
CS control
LPC1788,
tck/swdclk
LPC1788, P5.4
LPC1788, trst
LPC1788, tms/swdio
LPC1788, tdi
LPC1788, tdo/swo
LPC1788, v3a
LPC1788, vref
LPC1788, vssa
LPC1788, P2.0
LPC1788, P2.1
LPC1788, P2.2
LPC1788, P2.3
LPC1788, P2.4
LPC1788, P2.5
LPC1788, P2.6
LPC1788, P2.7
LPC1788, P2.8
LPC1788, P2.9
LPC1788, P2.10
LPC1788, P2.11
LPC1788, USB-D+1
LPC1788, USB-D+2
LPC1788, USB-D-1
LPC1788, USB-D-2
LPC1788, P2.12
LPC1788, P2.13
LPC1788, P0.0
LPC1788, P0.1
LPC1788, P0.2
LPC1788, P0.3
LPC1788, P0.4
LPC1788, P0.5
LPC1788, P0.6
Phone/Fax: +46 (0)40-611 00 93
E-mail: info@embeddedartists.com
http://www.embeddedartists.com
SODIMM
pins
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
Connected to
LPC1788, P5.4
LPC1788, P5.3
LPC1788, P5.2
LPC1788, P1.16
LPC1788, P4.31 via buffer
LPC1788, P4.30
LPC1788, P1.16
LPC1788, P2.14
LPC1788, P2.15
LPC1788, P2.19
LPC1788, P2.21
LPC1788, P2.22
LPC1788, P2.23
LPC1788, P2.25
LPC1788, P2.26
LPC1788, P2.27
Copyright 2011 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, I2C-SDA
B, I2C-SCL
P, GND
P, GND
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
OD, NandFlashRdy
LPC1788, P0.7
LPC1788, P0.8
LPC1788, P0.9
LPC1788, P0.10
LPC1788, P0.11
LPC1788, P0.12
LPC1788, P0.13
LPC1788, P0.14
LPC1788, P0.15
LPC1788, P0.16
LPC1788, P0.17
LPC1788, P0.18
LPC1788, P0.19
LPC1788, P0.20
LPC1788, P0.21
LPC1788, P0.22
LPC1788, P0.23
LPC1788, P0.24
LPC1788, P0.25
LPC1788, P0.26
LPC1788, P0.27
LPC1788, P0.28
LPC1788, P1.2
LPC1788, P1.3
LPC1788, P1.5
LPC1788, P1.6
LPC1788, P1.7
LPC1788, P1.11
LPC1788, P1.12
LPC1788, P1.13
LPC1788, P1.18
LPC1788, P1.19
LPC1788, P1.20
LPC1788, P1.21
LPC1788, P1.22
LPC1788, P1.23
LPC1788, P1.24
LPC1788, P1.25
LPC1788, P1.26
LPC1788, P1.27
LPC1788, P1.28
LPC1788, P1.29
LPC1788, P1.30
LPC1788, P1.31
Internal NAND flash
I/O legend
O: output
I: input
B: Bidirectional
P: Power
A: Analog
Embedded Artists AB
Davidshallsgatan 16
SE-211 45 Malm
Sweden
Copyright 2011 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists
Disclaimers
Embedded Artists reserves the right to make changes to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.
Customer is responsible for the design and operation of their applications and products using Embedded Artists products,
and Embedded Artists accepts no liability for any assistance with applications or customer product design. It is customers
sole responsibility to determine whether the Embedded Artists product is suitable and fit for the customers applications and
products planned, as well as for the planned application and use of customers third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks associated with their applications and products.
Embedded Artists does not accept any liability related to any default, damage, costs or problem which is based on any
weakness or default in the customers applications or products, or the application or use by customers third party
customer(s). Customer is responsible for doing all necessary testing for the customers applications and products using
Embedded Artists products in order to avoid a default of the applications and the products or of the application or use by
customers third party customer(s). Embedded Artists does not accept any liability in this respect.
Embedded Artists does not accept any liability for erratas on individual components.
All Embedded Artists products are sold pursuant to Embedded Artists terms and conditions of sale:
http://www.embeddedartists.com/shop/General_Terms_and_Conditions.pdf
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If
any part of this document refers to any third party products or services it shall not be deemed a license grant by Embedded
Artists for the use of such third party products or services, or any intellectual property contained therein or considered as a
warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property
contained therein.
UNLESS OTHERWISE SET FORTH IN EMBEDDED ARTISTS TERMS AND CONDITIONS OF SALE EMBEDDED
ARTISTS DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF
EMBEDDED ARTISTS PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF
ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY
RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY THE CEO OF EMBEDDED ARTISTS, PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, NUCLEAR, LIFE
SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR
MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL
DAMAGE.
Resale of Embedded Artists products with provisions different from the statements and/or technical features set forth in this
document shall immediately void any warranty granted by Embedded Artists for the Embedded Artists product or service
described herein and shall not create or extend in any manner whatsoever, any liability of Embedded Artists.
This document as well as the item(s) described herein may be subject to export control regulations. Export might require a
prior authorization from national authorities.
Copyright 2011 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php