Académique Documents
Professionnel Documents
Culture Documents
Josh Taylor
Packaging Engineering, SEG Group Apple
M.S. Mechanical Engineering , UCLA
June 2014
B.S. Mechanical Engineering UC Berkeley
May 2013
About Me
I am currently a Packaging Engineer at Apple in Silicon Engineering
Group. I completed my M.S. in Mechanical Engineering with a
concentration in Design and Manufacturing at UCLA in 2014 and my
B.S. in Mechanical Engineering at UC Berkeley in 2013.
Design Projects
Air Guitar
4-5
Mechanical Board
Eraser
6-7
7-8
DFMA Checklist
9-10
Campanile Project
12
Chassis Project
13-14
Slide Projector
Animation
15-16
Lockheed P-38
Lightning
17-18
Winner of
Departments
Mechanical Engineer
for best Senior Design
Project
The Amp houses the SB-RIO used for all data acquisition
and allowed for easier organization of all the wires
Criteria
Weight
<15 kg
Cost
<$80
Lifespan
3-5 years
Speed
Number of Parts
15
Noise Output
Unobtrusive sound
Steps to Operate
Users Age
Skills Used:
SolidWorks
Machining
Goals Accomplished:
Leave no chalk marks
Clean the board in under 5 seconds
Maintain performance throughout the year
Be unobtrusive
Bonus: was made under $200 budget
1.
2.
3.
4.
1. Variable amplitude slots for the scotch-yoke mechanism
2. Friction roller with rubber bands to pull the paper
through
3. Paper fed in from this side
4. Motor controlled by PWM circuit to allow for a changing
roller speed producing a changing sine wave frequency
Arduino
10
DFMA Checklist
The Goal: To create a user-friendly GUI to help the pilot/ manufacturing
engineers perform design for manufacturing and assembly analysis on
incoming projects in alpha and beta stage of development
Skills Used:
Python (with wxPython graphics package)
11
12
13
14
Linear Encoder
Loading cycle at 10N applied to the chassis
Force Sensor
15
16
17
18