Académique Documents
Professionnel Documents
Culture Documents
TC1483
Ed 01
Date : 24/05/2011
Nb. of pages: 5
2. Programming description:
- Add a line in "Internal numbering plan" table, in order to call a virtual destination "590", using
"secondary trunk group" function with "Base ARS" and "TMN Keep"
"590" as an example, may be any number to reach the "ARS" table.
- Add several lines in "ARS table prefixes" for prefix 590, to,the different destinations (extensions):
100, 101, 102, in our example: When we will call 590, the call will go to 100, 101 or 102:
Product: Alcatel-Lucent OmniPCX Office
1 /5
Article TC1483 Ed 01
- Add trunk groups "trunk group lists" table corresponding to the different "Providers/destinations"
created in the previous step:
>>> Index "local" is used to send digits to "Internal Numbering Plan"
- Manage the "Day groups" (day's 1 to 7 and day groups1 to 7) in "Day groups" table:
In our example, Saturday and Sunday belongs to "day group 3", Monday, Wednesday and Friday
belong to "day group 1" and Tuesday and Thursday belong to "day group 2".
- Create the time ranges in "Hours" table (ARS time range table):
2 /5
Article TC1483 Ed 01
- In our example we manage 4 time ranges; for each time range we need to assign the "virtual
destination" (created in "Providers/destinations" table), corresponding to the "day's group":
- Time range 1 from 08:00 to 12:00
- For day's group "1": to "extension 100" defined in "day's group 1" (for Monday,
Wednesday and Friday)
- for day's group "2": to "extension 101", defined in "day's group 2" (for Tuesday and
Thursday)
- For day's group "3": to "extension 102" defined in "day's group 3" (for Saturday and
Sunday)
- Time range 2 from 12:00 to 14:00
- For day's group "1": to "extension 102" defined in "day's group 1" (for Monday,
Wednesday and Friday)
- For day's group "2": to "extension 102", defined in "day's group 2" (for Tuesday and
Thursday)
- For day's group "3": to "extension 102" defined in "day's group 3" (for Saturday and
Sunday)
3 /5
Article TC1483 Ed 01
Thanks to this speed dialling number "8000"we will be able to enable the "dynamic
routing": to 590:
4 /5
Article TC1483 Ed 01
Because the speed dialling number is considered as an external destination, we also have to
enable "external diversion" feature rights for terminal "119":
Note:
- Using this type of dynamic call forwarding, extension 119 will stop ringing after the time out
of dynamic routing: only the destination will ,ring.
- During tests, the jump from a time range to another must be done by the system itself:
adjust the system clock to 1 or 2 minutes before the next time range; when the time range has
changed, wait a minimum of 1 minute.
- This solution may be used for different type of call forwarding.
End of document
5 /5
Article TC1483 Ed 01