Académique Documents
Professionnel Documents
Culture Documents
CONTROL
TM
CAMTROL
C A M T R O L A d v a n c e d M u l t i p l e x e d S u b s e a P ro d u c t i o n C o n t ro l S y s t e m
Multiplexed Subsea
Production Control System
from Cameron Controls is
part of the MOSAIC sys-
Multi-Mode
Running Tool
Jumper
Deployment
Basket
Control
Module
Transportation
Cage
Modular Design
As part of Camerons MOSAIC (Modular Subsea And Integrated Completions) product line,
the CAMTROL System offers maximum flexibility and modular design. The control system
is applicable to many field conditions and can be easily adapted for use in deepwater or shallow
water; with trees or manifolds; or with virtually any production scenario.
Intervention Flexibility
The CAMTROL System uses common intervention methods for the installation and retrieval
of the Subsea Control Module, Cameron Willis Retrievable Subsea Choke, accumulator module
and compact multi-phase flow meter. Methods may include diver-assist, diverless, guideline,
guidelineless, ROV-assisted and totally autonomous.
The development of this revolutionary new control system called for the reconfiguration of several
new key pieces of technology. Each one was engineered based on Camerons extensive knowledge
of production systems and experience with highly sophisticated multiplexed electro-hydraulic
controls systems. Such newly packaged technology includes:
Subsea Control Module
Weighing only 500 kg (1100 lbs), this pod is smaller, lighter in weight and incorporates more
functionality than any other pod on the market today.
The Standard Cameron Control System Meets All Subsea Production Options
Subsea
Control Module
Subsea
Distribution
Unit
Electro-Hydraulic
Jumper
Subsea Accumulator
Module
Provides local source of
hydraulic fluid when
required. Modules can be
replaced using MMRT.
Electro-Hydraulic Jumper
Interconnects several SCMs
to the Subsea Distribution
Unit.
SD016986
Standard Components -
Maximum Flexibility
Using a standard Subsea
Control Module and
The Multi-Mode Running Tool (MMRT) is used to perform the following functions:
Installation and change-out of the Subsea Control Module (SCM)
Installation and change-out of inserts in the Cameron Willis Subsea Retrievable Choke
Change-out of accumulator module
Change-out of multi-phase flow meter
The standard design of the MMRT provides functionality for performing these functions via all
common intervention methods for water depths to 3000 m (10,000 ft).
In shallow water applications, the CAMTROL System provides a simple manual lift and lock
tool which allows a diver to perform the required functions. For deeper water, a simple hydraulic
lift and lock tool is available which can be run on guidelines or guidelineless.
When use of the MMRT is required, it may be used on conventional guidelines or on lift wire
with ROV assistance. For still deeper water, the MMRT can be used in conjunction with an ROV
using on bottom techniques. The MMRT can also be used autonomously with thrusters and
cameras.
The MMRT is designed for efficient operation with
all large work class ROVs and is interface compliant
with API 17H using weight transfer systems for neutral buoyancy.
Multi-Purpose Intervention Tool
SD016998
Guideline
Guidelineless
ROV
C h a n g e - O u t o f S u b s e a C o n t ro l M o d u l e
Lift Cable
Electronics
Module
Hydraulic
Pump
MMRT
SCM
Manual Lift and
Lock Tool
SCM
Christmas
Tree
MMRT on Guidelines
Opto-electrical
Lift Cable
Buoyancy
Module
MMRT
Choke
Location
MMRT
ROV
Transfer
Weights
Thruster
Interface Frame
Choke
Location
SCM
SCM
Christmas
Tree
Umbilical/
Lift Wire
Hydraulic
Lift and Lock Tool
Interface
Frame
Manifold
Structure
SCM
Interface Frame
Buoyancy Module
SCM
Location
MMRT
ROV
Transfer Weights
SCM
Location
Orientation
Helix
Manifold
Structure
SD24542
S u b s e a C o n t ro l M o d u l e P ro v i d e s F u n c t i o n a l i t y i n C o m p a c t D e s i g n
Lightweight, Modular
SCM Controls up to
32 Functions
SD24617
Key to the functionality and modularity of the SCM are the Directional Control Valve and
HydraQuad Coupler.
industry.
24
28
32
M o d u l a r C o m p o n e n t s I n c re a s e F i e l d D e v e l o p m e n t O p t i o n s
Lift Mandrel
Subsea
Electronics
Module
Pressure Compensator
High Pressure
Supply Module
Directional Control
Valve Block
HydraQuad Coupler
SD24619
Lockdown
Mechanism
Dump Valve
Filters
Pressure
Transmitter
Filter Block
Connector
Receptacle
Electrical Connector
SD24616
Cameron Controls
Units 1 & 2
Boundary Road
Harfreys Industrial Estate
Great Yarmouth, Norfolk NR31 OLY
Tel 44 1493 440438
Fax 44 1493 655405
http://www.camerondiv.com
Manufacturing
Cameron Controls
Lueckenweg 1
29227 Celle, Germany
Tel 49 5141 8060
Fax 49 5141 806333
CAMTROL, MOSAIC and HydraQuad are trademarks of the Cooper Cameron Corporation, Cameron Division.
Cooper Cameron Corporation, Cameron Division, Printed in USA, 8/98, TG/5M, WR6589/TC1276