Académique Documents
Professionnel Documents
Culture Documents
STANDARDS
www.aws.org
2015 Summer/Fall
PUBLICATIONS
CATALOG
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
Sciakys EB welding job shop offers a wide range of affordable EB welding services for
customers in a wide variety of industries all over the world. We have the capability to weld
large assemblies up to 24 feet in length and 92 inches in diameter, as well as tiny parts that fit
in the palm of your hand. Whether your requirements call for the development of a prototype
part or fabrication services for large volume production, Sciaky has the right solution to meet
your needs. You wont find a more complete EB welding job shop anywhere in the world.
Sciaky offers:
EB welding consultation
Welding certifications
Metallurgical analysis
BUY OR LEASE?
You can buy AWS technical publications one-at-a-time as you need them, or save time and money by purchasing an
annual license to download from the full AWS collection on demand.
AWS now offers Licensing Services, providing online access to all of its technical publications, including all AWS codes
and standards from A1.1 to Z49.1. As a licensee, you may choose either the Full AWS Collection or one of several custom
packages that allow your firm to hand-pick the latest AWS documents as needed.
The AWS Licensing Service allows you to search, view, save, and print documents on demand. The online AWS collection
is updated weekly, so you will always have the most current editions.
For custom lease assistance, call toll-free:1-888-WELDING (1-888-935-3464, or 305-826-6192 outside of North
America).
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
NEW EDITIONS
IN THIS CATALOG
n B1.11M/B1.11:2015, Guide for the
Visual Examination of Welds
see page 19
n D16.4M/D16.4:2015, Specification for
the Qualification of Robotic Arc
Welding Personnel
see page 25
n WI:2015, Welding Inspection
Handbook
see page 19
COMING SOON
n A5.19-92 (R2015), Specification for
Magnesium Alloy Welding Electrodes
and Rods
n A5.28/A5.28M:2005 (R2015),
Specification for Low-Alloy Steel
Electrodes and Rods for Gas Shielded
Arc Welding
n A5.35/A5.35M:2015, Specification for
Wet Welding Electrodes for Shielded
Metal Arc Welding
n B2.1-1/8-010:2015, GTAW Standard
Welding Procedure Specification
for Welding Carbon Steel to Austenitic
Stainless Steel 18 Through 10 gauge
n B2.1-1/8-231:2015, GTAW followed
by SMAW Standard Welding Procedure
Specification for Welding Carbon Steel
to Austenitic Stainless Steel 1/8 inch
[3 mm] Through 1-1/2 inch [38 mm]
n C1.5:2015, Specification for the
Qualification of Resistance Welding
Technicians
CONTENTS
Online Programs.................................................7
Structural........................................................ 8-9
Sheet Metal.........................................................9
Reference and Business...................................10
Welding Handbooks.................................... 11-12
Translated Publications....................................13
ISO Standards...................................................13
Safety and Health....................................... 14-15
Training.............................................................15
Qualification................................................ 16-17
Certification......................................................18
Inspection.........................................................19
Welding and Cutting Processes................. 20-23
AWS Conferences.............................................24
Base Metal Weldability............................... 24-25
Robotics Automation........................................25
Plastics.............................................................25
Railroad.............................................................25
Brazing and Soldering................................ 26-27
Standard Welding Procedure
Specifications......................................... 28-29
Pipe and Tubing................................................30
Food Processing Systems................................31
Everyday Pocket Guides...................................31
Consumables and
Related Products.........................................33
Filler Material Specifications...........................34
Automotive........................................................36
Aerospace.........................................................36
Machinery................................................... 36-37
Thermal Spraying.............................................40
Marine...............................................................36
Resistance Welding..........................................38
Index........................................................... 41-49
Advertiser Index...............................................49
AWS Membership Application..........................50
ONLINE PROGRAMS
Certified Welding Inspector Pre-Seminar
This self-paced interactive online program combines Welding Fundamentals, Safety in Welding, Fabrication
Math I, Understanding Welding Symbols, Metallurgy for the Non-Metallurgist: Fundamentals, and the Science of
Non-Destructive Testing into a single package to prepare CWI candidates for the AWS CWI seminar and Part A
(Fundamentals) of the examination. Approx. 60 hours...................................................................... $1,150/$865
Welding Fundamentals
A comprehensive overview of the basic principles of welding. The course covers the basic science and practical
application of the most commonly utilized welding processes. Topics include welding terminology, weld design,
welding safety, electrical theory, the weldability of metals, and welding quality control.
Approx. 14 hours. 14 PDHs................................................................................................................ $470/$350
Safety in Welding
An exhaustive overview of welding safety in an accessible and engaging format. Topics include welding hazards,
safety equipment, ventilation, welding in confined spaces, and safety precautions and specifications.
Approx. 3 hours. 3 PDHs.......................................................................................................................$99/$74
Fabrication Math I
This overview of basic math skills provides a combination of clear step-by-step verbal and visual explanations that
makes each concept easy to understand and remember. Topics include place value, estimation, measurement, and
the addition, subtraction, multiplication and division of whole numbers, fractions, decimals and mixed numbers.
Approx. 18 hours. 18 PDHs................................................................................................................ $510/$385
Fabrication Math II
Picking up where Math I left off, Fabrication Math II covers the basic areas of math that welders and welding
supervisors need to know. Topics include percentages and ratio, order of operations, area, volume, and
conversions between the U.S. system and the metric system. This class is presented in easily digestible modules
with a number of interactive exercises to help participants understand and retain concepts.
Approx. 10 hours. 18 PDHs................................................................................................................ $495/$370
This in-depth course employs clear language, audio narration, and animated graphics to convey the principles of
this often complex topic in short easy-to-understand modules............................................................. $400/$300
This multimedia course employs clear, simple terms, audio narration and animated graphics to describe the basic
principles that underlie the broad field of metallurgy. Concepts covered include the anatomy of atoms, the periodic
table, chemical bonding, chemical reactivity, the atomic structure of materials and the properties of metals.
Approx. 6 hours. 6 PDHs................................................................................................................... $235/$175
This survey course is designed to explain the process and science behind five of the most common nondestructive
tests used in the welding industry: visual testing, penetrant testing, magnetic particle testing, radiographic testing,
and ultrasonic testing. Approx. 6 hours. 6 PDHs................................................................................. $235/$175
A detailed examination of the technical aspect of welding and welding equipment as they relate to sales,
distribution and manufacturing. Focuses on safety in welding, cutting and allied processes, the fundamental
principles of welding operations and processes, basic arc equipment, shielding gases, consumables, and related
components. Presented in 13 interactive and engaging modules, this seminar is perfect for both inside and outside
salespeople, distributors, manufactures, supervisors, managers, and any other professional that wants to gain a
technical understanding of welding principles, methodology, equipment, consumables, and variables.
Approx. 23 hours.............................................................................................................................. $600/$450
In this course, participants learn to identify and measure the costs of production in order to to reduce costs and
ensure quality. Topics include welding process variables, comparing welding processes, calculating weld metal
volume and deposition rates, and managing the costs of labor, materials, equipment, and overhead....... $600/$450
This self-paced interactive online program combines Welding Fundamentals, Safety in Welding, Fabrication Math
II, Understanding Welding Symbols, Science of Nondestructive Testing, and Economics of Welding into a single
package to help prepare candidates for the Certified Welding Supervisor examination and a career as a welding
supervisor. Approx. 75 hours....................................................................................................... $1,420/$1,065
The AWS Education Committee and the AWS Education Services Department host the Education Annual Program at
the FABTECH Exposition. In an effort to make this valuable content available to a broader audience, AWS has made
the majority of the program sessions available online free of charge. Geared toward welding educators, these
video-recorded sessions highlight the latest developments and best practices in welding education. ............. FREE
STRUCTURAL
NEW EDITION: D1.1/
D1.1M:2015, Structural
Welding CodeSteel
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
STRUCTURAL
BUNDLES
Bundle A:2015
SAVE $131/$98
Bundle B:2015
SAVE $241/$181
SHEET METAL
D9.1M/D9.1:2012, Sheet Metal Welding Code
Bundle C:2015
SAVE $79/$59
SAVE $102/$76
see page 36
REFERENCE &
BUSINESS
A1.1:2001, Metric Practice Guide for the Welding
Industry
10
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
AD_curriculum_5.5X5_00380.indd 1
5/5/15 2:36 PM
11
12
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
TRANSLATED
PUBLICATIONS
CHINESE
D1.1/D1.1M:2010, Structural Welding
CodeSteel.....................................................page 8
D1.5M/D1.5:2010, Bridge Welding Code........page 8
D14.3/D14.3M:2010, Specification for
Welding Earthmoving, Construction,
and Agricultural Equipment..........................page 37
WIT-T:2008, Welding Inspection
Technology.....................................................page 15
PORTUGUESE
D1.1/D1.1M:2010, Structural Welding
CodeSteel.....................................................page 8
QC1:2007, Standard for AWS Certification
of Welding Inspectors....................................page 18
RUSSIAN
D1.1/D1.1M:2010, Structural Welding
CodeSteel.....................................................page 8
SPANISH
A1.1:2001, Metric Practice Guide for
the Welding Industry.....................................page 10
A2.4:2012, Standard Symbols for Welding,
Brazing, and Nondestructive
Examination...................................................page 10
A3.0:2010, Standard Welding Terms and
Definitions......................................................page 10
B1.10:2009, Guide for the Nondestructive
Examination of Welds....................................page 19
B1.11:2000, Guide for the Visual
Examination of Welds....................................page 19
B2.1/B2.1M:2009, Specification for Welding
Procedure and Performance Qualification...page 16
B4.0:2007, Standard Methods for
Mechanical Testing of Welds........................page 19
B5.1:2013, Specification for the
Qualification of Welding Inspectors.............page 16
CM:2000, Certification Manual for
Welding Inspectors........................................page 15
ISO STANDARDS
AWS CAN NOW DELIVER ISO
WELDING STANDARDS
Standards published under ISO/TC 44, Welding and
allied processes and ISO/TC 167, Steel and aluminum
structures, are available in the AWS bookstore at
member and nonmember pricing under the following
categories:
w Aluminum structures
w Brazing materials and processes
w Equipment for gas welding, cutting and
allied processes
procedure specifications
w Soldering materials
w Steel: fabrication and erection
w Steel: material and design
w Testing and inspection of welds
w Welding and brazing in aerospace
w Welding consumables
w Welding simulation
pubs.aws.org
for more information or
contact AWS at
1-305-826-6192.
13
www.aws.org/technical/facts
or purchase the printed document.
Order Code: Z49.1........................................... $72/$54
Spanish Edition: Z49.1SP................................. $72/$54
14
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
TRAINING
CM:2000, Certification Manual for Welding
Inspectors
15
QUALIFICATION
B2.1/B2.1M:2014, Specification for Welding
Procedure and Performance Qualification
320 pages.
Order Code: B2.1......................................... $264/$198
Spanish edition (2009)................................. $240/$180
16
20 pages.
Order Code: B5.16........................................... $56/$42
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
17
CERTIFICATION
QC1:2007, Standard for AWS Certification of
Welding Inspectors
12 pages.
Order Code: QC4.............................................. $13/$10
FREE-Download at www.aws.org/certification
10 pages.
Order Code: QC7.............................................. $13/$10
FREE-Download at www.aws.org/certification
38 pages.
Order Code: QC7C............................................ $13/$10
FREE-Download at www.aws.org/certification
22 pages.
Order Code: QC7F............................................ $13/$10
FREE-Download at www.aws.org/certification
16 pages.
Order Code: QC15............................................ $13/$10
FREE-Download at www.aws.org/certification
24 pages.
Order Code: QC19............................................ $13/$10
FREE-Download at www.aws.org/certification
24 page.
Order Code: QC20............................................ $13/$10
FREE-Download at www.aws.org/certification
10 pages.
Order Code: QC7G............................................ $13/$10
FREE-Download at www.aws.org/certification
16 pages.
Order Code: QC13............................................ $13/$10
FREE-Download at www.aws.org/certification
16 pages.
Order Code: QC14............................................ $13/$10
FREE-Download at www.aws.org/certification
18
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
INSPECTION
B1.10M/B1.10:2009, Guide for the Nondestructive
Examination of Welds
19
20
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
21
22
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
23
AWS
CONFERENCES
To register for AWS conferences,
visit www.aws.org/conferences or
call 1-800-443-9353 ext 234.
Online conferences can be viewed at
awo.aws.org
AWS 2nd Welding Education, Skills & Certification
Conference
BASE METAL
WELDABILITY
C1.4M/C1.4:2009, Specification for Resistance
Welding of Carbon and Low-Alloy Steels
24
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
ROBOTICS &
AUTOMATION
A9.5:2013, Guide for Verification and Validation in
Computation Weld Mechanics
PLASTICS
G1.1M/G1.1:2006, Guide to Ultrasonic Assembly of
Thermoplastics
RAILROAD
D15.1/D15.1M:2012-AMD1, Railroad Welding
Specification for Cars and Locomotives
25
BRAZING &
SOLDERING
C3.2M/C3.2:2008, Standard Method for Evaluating
the Strength of Brazed Joints
26
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
Brazing Handbook
Soldering Handbook
BHC26
$24/$18
BHC27
$24/$18
BHC28
BHC29
$24/$18
$24/$18
BHC30
$24/$18
BHC31
BHC32
$24/$18
$24/$18
BHC33 $24/$18
BHC34 $24/$18
BHC35 $24/$18
BHC36 $24/$18
Produced by the American Welding Society and ASM International, the IBSC 2012 Virtual Conference offers
convenient access to 52 video presentations totaling more than 13 hours of educational content.
The IBSC technical program consists of presentations from leading researchers focusing on the latest advances
in brazing and soldering science and technology. The IBSC virtual conference contains presentations from NASA
Goddard Space Flight Center, Boise State University, Tokyo Institute of Technology, Princeton Plasma Physics
Laboratory, Georgia Institute of Technology, and Sandia National Laboratories. Cost is $400 for AWS members or
$450 for nonmembers for 30 days of unlimited access. For more information or a sample presentation, please
visit awo.aws.org/conferences/IBSC2012
27
THICKNESS
CONDITION
ORDER NUMBER
Carbon Steel
B2.1-1-004:2002(R2013)
Carbon Steel
10 18 gauge GTAW
ER70S-2 or -3
B2.1-1-008:2002 (R2013)
Carbon Steel
10 18 gauge SMAW
E6010 or E6013
B2.1-1-012:2002 (R2013)
Galvanized Steel
B2.1-1-003:2002 (R2013)
Galvanized Steel
10 18 gauge GTAW
ER70S-2 or -3
B2.1-1-007:2002 (R2013)
Galvanized Steel
10 18 gauge SMAW
E6010 or E6013
B2.1-1-011:2002 (R2013)
B2.1-1/8-006:2002 (R2013)
ER309
B2.1-1/8-010:2015
B2.1-1/8-014:2002 (R2013)
GALVANIZED
M-1 TO
M-8
STAINLESS
Stainless Steel
B2.1-8-005:2002 (R2013)
Stainless Steel
10 18 gauge GTAW
ER3XX
B2.1-8-009:2002 (R2013)
Stainless Steel
10 18 gauge SMAW
B2.1-8-013:2002 (R2013)
AL
SHEET METAL
CARBON
STEEL
SHEET METAL
Aluminum
10 18 gauge
ER4043 or R4043
GTAW
B2.1-22-015:2011
CARBON STEEL
STAINLESS
PLATE
PLATE (ALL STANDARDS BELOW ARE ADOPTED BY NATIONAL BOARD INSPECTION CODE)
Carbon Steel
3/16 7/8
GTAW
ER70S-2 or -3
B2.1-1-002:1990 (R2006)
Carbon Steel
1/8 1-1/2
As-welded or PWHT
Carbon Steel
3/16 3/4
SMAW
Carbon Steel
E7018
As-welded or PWHT
B2.1-1-016:1994
Carbon Steel
E6010
As-welded or PWHT
B2.1-1-017:1994
Carbon Steel
1/8 1-1/2
SMAW
As-welded or PWHT
B2.1-1-022:1994
Carbon Steel
As-welded or PWHT
B2.1-1-026:1994
Carbon Steel
1/8 1-1/2
E71T-8
As-welded
B2.1-1-018:1994
Carbon Steel
1/8 1/2
E71T-11
As-welded
B2.1-1-027:2011
Carbon Steel
1/8 1-1/2
E70T-1 or E71T-1
As-welded
B2.1-1-019:1994
Carbon Steel
1/8 1-1/2
E70T-1 or E71T-1
As-welded or PWHT
B2.1-1-020:1994
Stainless Steel
ER3XX
As-welded
B2.1-8-024:2001 (R2012)
Stainless Steel
1/8 1-1/2
As-welded
B2.1-8-025:2001 (R2012)
Stainless Steel
1/8 1-1/2
SMAW
E3XX-XX
As-welded
B2.1-8-023:1994
B2.1-1-021:1994
B2.1-1-001:1990 (R2006
*Downhill progression on root pass. All other vertical position passes are up hill.
AWS publishes Standard Welding Procedure Specifications (SWPSs), which are reviewed and validated
by the Welding Procedures Committee of the Welding Research Council. They are balloted through the
AWS standards-development program as American National Standards. Standard Welding Procedure
Specifications may be used on work covered by the AWS D1.1, Structural Welding CodeSteel with the
engineers approval. The National Board Inspection Code has adopted all pipe SWPSs except B2.1-1-202
and B2.1-1-312. SWPSs with red order numbers may be used on ASME Boiler and Pressure Vessel work
with additional requirements spelled out in Section IX of ASME Boiler & Pressure Vessel Code. All licenses
are good for unlimited intracompany applications.
28
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
THICKNESS
PROCESS
FILLER METAL
CONDITION
ORDER NUMBER
PRIMARILY PIPE
M-1 TO M-8
STAINLESS
CHROME-MOLY STEEL
PRIMARILY PIPE
CARBON STEEL
ALL STANDARDS BELOW ARE ADOPTED BY NATIONAL BOARD INSPECTION CODE, EXCEPT B2.1-1-202
Carbon Steel
1/8 1-1/2 GMAW-S followed by
FCAW-G**
As-welded or PWHT
B2.1-1-232:2006
Carbon Steel
1/8 1-1/2 GMAW-s followed by
GMAW spray transfer**
ER70S-3
As-welded or PWHT
B2.1-1-233:2006
Carbon Steel
1/8 1-1/2 FCAW-G, Ar-CO2 shielded
E70T-1M, E71T-1M,
or E71T-12M
As-welded or PWHT
B2.1-1-234:2006
Carbon Steel
ER70S-3
As-welded or PWHT
B2.1-1-235:2006
Carbon Steel
ER70S-2
As-welded or PWHT
B2.1-1-207:1996 (R2007)
Carbon Steel
As-welded or PWHT
B2.1-1-209:1996 (R2007)
Carbon Steel
As-welded or PWHT
B2.1-1-210:2001 (R2012)
Carbon Steel
1/8 1-1/2 GTAW, consumable inserts INMs-1, E70S-2 & E7018
/SMAW
As-welded or PWHT
B2.1-1-211:2001 (R2012)
Carbon Steel
1/8 3/4
SMAW
As-welded
B2.1-1-201:1996 (R2007)
Carbon Steel
1/8 3/4
SMAW
As-welded
B2.1-1-202:1996 (R2007)
Carbon Steel
1/8 3/4
SMAW
E6010
As-welded
B2.1-1-203:1996 (R2007)
Carbon Steel
1/8 3/4
SMAW
E6010*
As-welded
B2.1-1-204:1996 (R2007)
Carbon Steel
As-welded or PWHT
B2.1-1-205:1996 (R2007)
Carbon Steel
As-welded or PWHT
B2.1-1-206:1996 (R2007)
Carbon Steel
E7018
As-welded or PWHT
ER309(L)
As-welded
B2.1-1/8-227:2002 (R2013)
As-welded
B2.1-1/8-229:2002 (R2013)
Carbon to Stainless 1/16 1-1/2 GTAW consumable inserts IN309 and ER309(L)
As-welded
B2.1-1/8-230:2002 (R2013)
As-welded
E309(L)-15,-16 or -17
As-welded
B2.1-1/8-228:2002 (R2013)
Stainless Steel
ER3XX
As-welded
B2.1-8-212:2001 (R2012)
Stainless Steel
As-welded
B2.1-8-214:2001 (R2012)
Stainless Steel
As-welded
B2.1-8-215:2001 (R2012)
Stainless Steel
1/8 1-1/2 GTAW consumable inserts IN3XX, ER3XX
/SMAW
& E3XX-XX
As-welded
B2.1-8-216:2001 (R2012)
Stainless Steel
E3XX-XX
B2.1-1-208:1996 (R2007)
B2.1-1/8-231:2015
As-welded
B2.1-8-213:1997 (R2012)
As-welded (1/2) or
PWHT (all thicknesses)
B2.1-4-217:1999 (R2009)
As-welded (1/2) or
PWHT (all thicknesses)
B2.1-4-219:1999 (R2009)
Cr-Mo (M-4/P-4) 1/8 3/4 GTAW consumable inserts IN515 & ER80S-B2
As-welded (1/2) or
PWHT (all thicknesses)
B2.1-4-220:1999 (R2009)
Cr-Mo (M-4/P-4) 1/8 1-1/2 GTAW consumable inserts IN515, ER80S-B2, &
/SMAW
E8018-B2
As-welded (1/2) or
PWHT (all thicknesses)
B2.1-4-221:1999 (R2009)
As-welded (1/2) or
PWHT (all thicknesses)
B2.1-4-218:1999 (R2009)
As-welded (1/2) or
PWHT (all thicknesses)
B2.1-5A-222:1999 (R2009)
Cr-Mo (M-5A/P-5A) 1/8 1-1/2 GTAW followed by SMAW ER90S-B3 & E9018-B3
Cr-Mo (M-5A/P-5A) 1/8 3/4 GTAW consumable inserts IN521 & ER90S-B3
As-welded (1/2) or
PWHT (all thicknesses)
Cr-Mo (M-5A/P-5A) 1/8 1-1/2 GTAW consumable inserts IN521, ER90S-B3, &
/SMAW
E9018-B3
As-welded (1/2) or
PWHT (all thicknesses)
ER80S-B2 &
E8018-B2
B2.1-5A-225:1999 (R2009)
B2.1-5A-223:1999 (R2009)
**FCAW limited to uphill progression only when welding in the vertical position. / ***GMAW spray transfer limited to flat position only.
PRICES:
The user-license one-time fee for each SWPS is $189 ($252 for nonmembers).
Most AWS publications are available for download, and can be previewed at pubs.aws.org
29
D10.10/D10.10M:1999(R2009), Recommended
Practices for Local Heating of Welds in Piping and
Tubing
30
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
FOOD PROCESSING
SYSTEMS
D18.1/D18.1M:2009, Specification for Welding of
Austenitic Stainless Steel Tube and Pipe Systems
in Sanitary (Hygienic) Applications
EVERYDAY POCKET
GUIDES
The Everyday Pocket Handbook for Arc Welding
Steel
31
CONSUMABLES &
RELATED
PRODUCTS
42 pages, 5 tables.
Order Code: A5.32........................................... $64/$48
SMAW
GTAW
GMAW
PAW
FCAW
Carbon Steel
A5.2
A5.1
A5.18 A5.36
A5.20 A5.36
A5.17
A5.25
A5.26
A5.8 A5.31
C2.25
Low-Alloy Steel
A5.2
A5.5
A5.28 A5.36
A5.29 A5.36
A5.23
A5.25
A5.26
A5.8 A5.31
C2.25
A5.4
A5.9 A5.22
A5.22
A5.9
A5.9
A5.9
A5.8 A5.31
C2.25
A5.15
A5.15
A5.15
Nickel Alloys
A5.11
A5.14
A5.34
Aluminum Alloys
A5.3
Copper Alloys
A5.6
Stainless Steel
Cast Iron
A5.15
SAW
ESW
EGW
BRAZING
THERMAL
SPRAYING
A5.8 A5.31
A5.14
A5.8 A5.31
C2.25
A5.10
A5.8 A5.31
C2.25
A5.7
A5.8 A5.31
C2.25
Titanium Alloys
A5.16
A5.8 A5.31
Zirconium Alloys
A5.24
A5.8 A5.31
Magnesium Alloys
A5.19
A5.8 A5.31
Tungsten Electrodes
A5.12
A5.14
A5.8 A5.31
A5.21
A5.13
A5.21
Consumable Inserts
A5.30
Shielding Gases
A5.32
Ceramics
A5.21
A5.32
A5.21
C2.25
A5.32
C2.25
33
Price each............................................................ $64/$48
Purchase 5 at a time........................................ Take 5% off
Purchase 10 at a time.................................... Take 10% off
Purchase 15 at a time.................................... Take 15% off
Purchase 20 at a time.................................... Take 20% off
ORDER
CODE
A5.1/A5.1M:2012
Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding (60 pages)
A5.1
A5.2/A5.2M:2007
Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding (26 pages)
A5.2
A5.3/A5.3M:1999(R2007) Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal
Arc Welding (28 pages)
A5.3
A5.4/A5.4M:2012
Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding (52 pages)
A5.4
A5.5/A5.5M:2014
Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding (68 pages)
A5.5
A5.6/A5.6M:2008
A5.6
A5.7/A5.7M:2007
Specification for Copper and Copper Alloy Bare Welding Rods and Electrodes (30 pages) A5.7
A5.8M/A5.8:2011-AMD1 Specification for Filler Metals for Brazing and Braze Welding (62 pages)
A5.8
A5.9/A5.9M:2012
Specification for Bare Stainless Steel Welding Electrodes and Rods (44 pages)
A5.9
A5.10/A5.10M:2012
(ISO 18273:2004 MOD)
A5.10
A5.11/A5.11M:2010
Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal
Arc Welding (42 pages)
A5.11
A5.12M/A5.12:2009
(ISO 6848:2004 MOD)
Specification for Tungsten and Oxide Dispersed Tungsten Electrodes for Arc Welding
and Cutting (36 pages)
A5.12
A5.13/A5.13M:2010
Specification for Surfacing Electrodes for Shielded Metal Arc Welding (42 pages)
A5.13
A5.14/A5.14M:2011
Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods (40 pages) A5.14
A5.15-90 (R2006)
Specification for Welding Electrodes and Rods for Cast Iron (32 pages)
A5.15
A5.16/A5.16M:2013
(ISO 24034:2010 MOD)
Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods (36 pages)
A5.16
A5.17/A5.17M-97(R2007) Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding (40 pages) A5.17
A5.18/A5.18M:2005
Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding (42 pages) A5.18
A5.19-92(R2006)
Specification for Magnesium Alloy Welding Electrodes and Rods (26 pages)
A5.19
A5.20/A5.20M:2005
Specification for Carbon Steel Electrodes for Flux Cored Arc Welding (48 pages)
A5.20
A5.21/A5.21M:2011
Specification for Bare Electrodes and Rods for Surfacing (40 pages)
A5.21
A5.22/A5.22M:2012
A5.22
A5.23/A5.23M:2011
Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding (58 pages) A5.23
A5.24/A5.24M:2014
Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods (30 pages) A5.24
A5.25
A5.26/A5.26M-97(R2009) Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding (34 pages) A5.26
34
A5.28/A5.28M:2005
Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding (46 pages) A5.28
A5.29/A5.29M:2010
Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding (60 pages)
A5.29
A5.30/A5.30M:2007
A5.30
A5.31M/A5.31:2012
Specification for Fluxes for Brazing and Braze Welding (36 pages)
A5.31
A5.32M/A5.32:2011
(ISO 14175:2008 MOD)
A5.32
A5.34/A5.34M:2013
Specification for Nickel-Alloy Electrodes for Flux Cored Arc Welding (40 pages)
A5.34
A5.35/A5.35M:2015
Specification for Wet Welding Electrodes for Shielded Metal Arc Welding
A5.35
A5.36/A5.36M:2012
Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored
Arc Welding and Metal Cored Electrodes for Metal Arc Welding (64 pages)
A5.36
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
Arcos produces a
comprehensive line
of premium bare
wire, covered and tubular stainless steel
alloy welding electrodes. Whatever your
demanding application from nuclear or
military construction to power generation
or petrochemical plants, pipelines to car
exhaust systems, shipbuilding to paper
production, and so many others Arcos
has the right stainless steel electrode to
meet your exacting requirements.
These outstanding, made-in-America
Arcos electrodes are available in a broad
range of compositions consisting of
austenitic, duplex and superduplex,
martensitic and ferritic grades and are
manufactured to your specific needs.
They include:
AUTOMOTIVE
D8.1M:2013, Specification for Automotive Weld
Quality Resistance Spot Welding of Steel
AEROSPACE
D17.1/D17.1M:2010-AMD1, Specification for
Fusion Welding for Aerospace Applications
36
MARINE
D3.5-93R, Guide for Steel Hull Welding
Specifies the classification requirements for weldthrough paint primers for paint manufacturers, based
on the maximum coating thickness and welding
procedure used in testing. 20 pages, 1 figure, 1 table.
Order Code: D3.9............................................. $56/$42
MACHINERY
D14.1/D14.1M:2005, Specification for Welding
of Industrial and Mill Cranes and Other Material
Handling Equipment
D14.3/D14.3M:2010-AMD1, Specification
for Welding Earthmoving, Construction, and
Agricultural Equipment
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
SAVE $52/$39
Bundle F:2015
SAVE $52/$39
37
RESISTANCE
WELDING
A10.1M:2007, Specification for Calibration and
Performance Testing of Secondary Current
Sensing Coils and Weld Current Monitors Used in
Single-Phase AC Resistance Welding
see page 16
hydraulic and cooling systems. Includes a troubleshooting section. Useful for maintenance personnel
and operators.
Order Code: RW14........................................... $42/$32
38
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
www.oerlikon.com/metco
THERMAL
SPRAYING
C2.16/C2.16M:2002, Guide for Thermal-Spray
Operator Qualification
C2.20/C2.20M:2002, Specification
for Thermal Spraying Zinc Anodes on Steel
Reinforced Concrete
VIRTUAL INTERNATIONAL
THERMAL SPRAY
ASSOCIATION CONFERENCE
The International Thermal Spray Association presents Thermal Spray Technology: High Performance Surfaces,
a series of presentations describing some of the common design considerations needed for selecting a thermal
spray coating as well as typical examples of success and failure in the design process. These presentations were
recorded at the 4th ITSA Conference held in Las Vegas, Nevada in April of 2012. The ITSA 2012 Virtual Conference
offers convenient access to 15 video presentations totaling about four hours of educational content. Cost is $185
for AWS members or $210 for nonmembers for 30 days of unlimited access. For more information, please visit
awo.aws.org/conferences/itsa-2012
40
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
SUBJECT INDEX
C3.8M/C3.8
C3.9M/C3.9
AEROSPACE
D9.1M/D9.1
BRIDGES
D1.5M/D1.5
ALUMINUM
A5.3/A5.3M
IBSC
CARBON STEEL
A5.1/A5.1M
A5.2/A5.2M
B2.1-22-015
C3.7M/C3.7
D1.2/D1.2M
D3.7
D8.14M
A5.36/A5.36M
PHB-8
GTW
Guide to Weldability:
Carbon and Low-Alloy Steels.....................25
WQA
Welding AluminumQuestions and
Answers.....................................................24
CAST IRON
AUTOMOTIVE
A5.15
D8.1M
D11.2
D8.8M
CERTIFICATION
D8.9M
Recommended Practices for Test Methods
for Evaluating the Resistance Spot Welding
Behavior of Automotive Sheet Steel
Materials....................................................36
D8.14M
CM
CMWS
QC1
QC4
QC5
QC7
QC7X
QC7 Supplements......................................18
QC10
QC11
QC12
B2.2/B2.2M
BRH
Brazing Handbook......................................27
QC13
C3.2M/C3.2
QC14
C3.3
QC15
C3.4M/C3.4
QC17
QC19
QC20
C3.5M/C3.5
C3.6M/C3.6
C3.7M/C3.7
41
CHARTS
C5.7
A3.1
D18.2
F2.2
C7.1M/C7.1
C7.3
COMPUTERIZATION
A9.5
A4.2M
Standard Procedures for Calibrating
(ISO 8429 MOD) Magnetic Instruments to Measure the Delta
Ferrite Content of Austenitic and Duplex
Ferritic-Austenitic Stainless Steel Weld
Metal.........................................................33
CORROSION RESISTANCE
C2.20/C2.20M Specification for Thermal Spraying Zinc
Anodes on Steel Reinforced Concrete.........40
C2.23M/C2.23
PRGHF
Thermal CuttingClassification of
Thermal CutsGeometric Product
Specification and Quality Tolerances.............20
Recommended Practices for Air
Carbon Arc Gouging and Cutting.................20
A4.3
A4.4M
A4.5M/A4.5
Standard Methods for Classification Testing ..
(ISO 15792-3 MOD) of Positional Capacity and Root Penetration
of Welding Consumables in a Fillet Weld.....33
A5.01M/A5.01 Welding ConsumablesProcurement of
(ISO 14344 MOD Filler Metals and Fluxes..............................33
A5.02/A5.02M Specification for Filler Metal Standard Sizes,
Packaging, and Physical Attributes................33
A5.1/A5.1M
A5.2/A5.2M
C7.2
Recommended Practices for Laser
Beam Welding, Cutting, and Allied
Processes..................................................22
A5.3/A5.3M
A5.4/A5.4M
A5.5/A5.5M
F4.1
DESIGN
DPW
A5.6/A5.6M
FWSH
A5.7/A5.7M
A5.8M/A5.8
A5.9/A5.9M
CCRM
CM
CMWS
EG2.0
EG3.0
EG4.0
GWF
QC5
VIW-M
WIT-T
WIT-W
42
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
A5.20/A5.20M
A5.21/A5.21M
GOUGING (seeCUTTING)
HEALTH (see SAFETY AND HEALTH)
INSPECTION
B1.10M/B1.10 Guide for the Nondestructive Examination
of Welds.....................................................19
B1.11
B4.0
B4.0M
C3.3
C3.8M/C3.8
D18.2
G1.2M/G1.2
G1.6
PHB-2
A5.36/A5.36M
UGFM:2010
PHB-6
Everyday Pocket Handbook for Visual
Inspection of AWS D1.1 Structural Welding
Codes Fabrication and Welding
Requirements ...........................................31
QC1
Standard for AWS Certification of Welding
Inspectors .................................................18
QC15
VIW-M
D18.1
WI
D18.2
WIT-T
WIT-W
FRICTION WELDING
C7.4/C7.4M
C6.1
C6.2/C6.2M
PHB-4
Everyday Pocket Handbook for Gas Metal Arc
Welding (GMAW) and Flux Cored Arc Welding
(FCAW)........................................................31
PHB-8
A5.22
C5.5/C5.5M
D14.8M
43
TIH
TWM
MARINE
B2.1-X
D3.7
D3.9
D18.1
D18.2
F4.1
Safe Practices for the Preparation of
Containers and Piping for Welding and
Cutting.......................................................14
PLASTICS
B2.4
G1.1M/G1.1
Guide to Ultrasonic Assembly of
Thermoplastics..........................................25
G1.2M/G1.2
G1.6
PRGWM
WM1.4
G1.10M
METALLURGY
B2.1-X
C4.2/C4.2M
B2.3/B2.3M
C4.3/C4.3M
B2.4
C4.4/C4.4M
Recommended Practices for Heat Shaping
and Straightening with Oxyfuel Gas Heating
Torches......................................................20
B5.1
C4.5M
Uniform Designation System for Oxyfuel
Nozzles......................................................20
C4.6M
B5.2
Specification for the Qualification of Welding
Inspector Specialists and Welding Inspector
Assistants..................................................16
B5.4
B5.5
B5.9
B5.14
B5.15
B5.16
D10.8
Recommended Practices for Welding of
Chromium-Molybdenum Steel Piping and
Tubing........................................................30
B5.17
C1.5
D10.4
C7.4/C7.4M
44
B2.1/B2.1M
G1.6
PAPQV
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
B5.15
QC15
RAILROADS
D15.1/D15.1M Railroad Welding Specification for
Cars and Locomotives ...............................25
D15.2/D15.2M Recommended Practices for the Welding
of Rails and Related Rail Components for
Use by Rail Vehicles ..................................25
REFERENCE
A1.1
Metric Practice Guide for the Welding
Industry.....................................................10
F1.2
F1.3
F1.6
F2.2
F2.3M
A2.1 WC/DC
A2.4
F3.2M/F3.2
A3.0M/A3.0
A3.1
F4.1
JWE
PHB-5
SHF
PRGP
WJ-XXXX
WHB-X.X
Welding Handbooks...................................11
RESISTANCE WELDING
A10.1M
Z49.1
Safety in Welding, Cutting, and Allied
Processes..................................................14
SHEET METAL
B2.1-X
Standard Welding Procedure
Specifications....................................... 28-29
D1.3/D1.3M
D8.9M
C1.1M/C1.1
Recommended Practices for Resistance
Welding......................................................38
D9.1M/D9.1
C1.4M/C1.4
C1.5
C3.9M/C3.9
SHIELDING GASES
D8.1M
D8.9M
PHB-7
B2.3/B2.3M
RWPH
RWVID
J1.1M/J1.1
RWM
STAINLESS STEEL
QC20
A4.2M
(ISO 8249 MOD)
A5.4/A5.4M
A5.9/A5.9M
ROBOTIC WELDING
D16.1M/D16.1 Specification for Robotic Arc Welding Safety...25
D16.2M/16.2
QC19
45
D10.4
C2.18
D18.1
D18.2
G2.3M/G2.3
PASS
C2.23M/C2.23
WQS
Welding Stainless SteelQuestions and
Answers.....................................................24
STEEL
TSM
ASTMSW
TSS
Thermal Spraying Practice, Theory and
Application ................................................40
PHB-1
TST
STRUCTURAL WELDING
THERMITE WELDING
ASTMSW
D1.1/D1.1M
D1.1-BI
D1.1 CCRM
TITANIUM
D1.2/D1.2M
D1.9/D1.9M
D1.3/D1.3M
D1.4/D1.4M
D1.5M/D1.5
D1.6/D1.6M
D1.7/D1.7M
D1.8/D1.8M
D1.9/D1.9M
PHB-3
PHB-6
STUD WELDING
D1.1/D1.1M
D1.2/D1.2M
D1.5M/D1.5
D1.6/D1.6M
G2.4/G2.4M
ZINC COATINGS
WZC
ZIRCONIUM
A5.24/A5.24M Specification for Zirconium and Zirconium
Alloy Welding Electrodes and Rods.............34
G2.5/G2.5M
TERMINOLOGY
A3.0M/A3.0
46
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
STANDARDS BY
CODE NUMBER
A1.1Metric Practice Guide for the Welding Industry...........10
A2.1Welding Symbol Charts..............................................10
A2.4Standard Symbols for Welding, Brazing, and
Nondestructive Examination..................................................10
A3.0M/A3.0Standard Welding Terms and Definitions ........10
A3.1Master Chart of Welding and Joining Processes.........10
A4.2M (ISO 8249 MOD)Standard Procedures for Calibrating
Magnetic Instruments to Measure the Delta Ferrite Content of
Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld
Meta.....................................................................................33
A4.3Standard Methods for Determination of the Diffusible
Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel
Weld Metal Produced by Arc Welding....................................33
47
48
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
ADVERTISER
INDEX
ARCOS................................................ page 35
DENGENSHA....................................... page 20
HYPERTHERM..................................... page 11
THERMO-CALC................................... page 17
49
50
Lesser price shown is for AWS members. Always get the best price from the source: 1-888-WELDING
WELDING
TRAINING
MATERIALS
The same curricula used by the Instructors at
Hobart Institute of Welding Technology...
800-332-9448 / www.welding.org
State of Ohio Reg. No. 70-12-0064HT
STANDARDS
American Welding
Society, inc.
NON-PROFIT ORG.
U.S. POSTAGE