Académique Documents
Professionnel Documents
Culture Documents
Acceptance Report
LEGAL INFORMATION
By accepting this certain document of ZTE CORPORATION you agree to the following
terms. If you do not agree to the following terms, please notice that you are not allowed
to use this document.
Copyright 2015 ZTE CORPORATION. Any rights not expressly granted herein are
reserved. This document contains proprietary information of ZTE CORPORATION. Any
reproduction, transfer, distribution, use or disclosure of this document or any portion of
this document, in any form by any means, without the prior written consent of ZTE
CORPORATION is prohibited.
and
are registered trademarks of ZTE CORPORATION. ZTEs company
name, logo and product names referenced herein are either trademarks or registered
trademarks of ZTE CORPORATION. Other product and company names mentioned
herein may be trademarks or trade names of their respective owners. Without the prior
written consent of ZTE CORPORATION or the third party owner thereof, anyones access
to this document should not be construed as granting, by implication, estopped or
otherwise, any license or right to use any marks appearing in the document.
The design of this product complies with requirements of environmental protection and
personal security. This product shall be stored, used or discarded in accordance with
product manual, relevant contract or laws and regulations in relevant country
(countries).
This document is provided as is and as available. Information contained in this
document is subject to continuous update without further notice due to improvement
and update of ZTE CORPORATIONs products and technologies.
ZTE CORPORATION
Addres
s:
Websit
e:
Email:
NO. 55
Hi-tech Road South
ShenZhen
P.R.China
518057
http://dms.zte.com.cn (TSM-Technical Support)
TSM.Aftersales@zte.com.cn
Revision History
Product Version
Document Version
Serial Number
R1.0
Author
Date
2010-11-20
Document Version
R1.0
Prepared
by
Reviewed by
Approved by
Wang
Jian
II
Proposal: Before reading this document, you had better have the following knowledge and
skills.
SEQ
Reference material
1
2
3
Follow-up document: After reading this document, you may need the following
information
SEQ
Reference material
Information
1
2
3
III
Description
2 Organization of Project
Acceptance
4 Acceptance Conclusion
IV
TABLE OF CONTENTS
1
Acceptance Conclusion..................................................................................6
Project
Name
Commencement
date
Completion
date
Users
personnel
Person in charge:
Participants:
Person in charge:
Participants:
ZTEs personnel
Supervisors
personnel
Constructors
personnel
Person in charge:
Participants:
Person in charge:
Participants:
Remarks
Acceptanc
e check for
rack
installation
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Result
Conclusion
Remarks
Pass
Fail
Item
Acceptanc
e check for
sub-rack
installation
Acceptanc
e check for
NM
installation
Laying of
power
supply
cables
Laying of
optical
fibers
Result
Conclusion
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Remarks
Pass
Fail
Item
Laying of
cables
Result
Conclusion
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Pass
Fail
Remarks
Pass
Fail
Item
Result
Conclusion
Pass
Fail
RJ45 connectors of
network cables should be
in proper line sequence.
These connectors should
be in good contact with the
conductors.
Pass
Fail
Pass
Fail
Pass
Fail
Remarks
Acceptance Conclusion
Users
representativ
e
Signature:
Dated:
ZTEs
representativ
e
Signature:
Dated:
Supervisors
representativ
e
Signature:
Dated:
Constructors
representativ
e
Signature:
Dated: