Académique Documents
Professionnel Documents
Culture Documents
01
Date
2011-04-30
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 01 (2011-04-30)
WCDMA RAN
Active TX Chain Gain Calibration Feature Parameter
Description
Contents
Contents
1 About This Document..................................................................................................................1
1.1 Scope..............................................................................................................................................................................1
1.2 Intended Audience..........................................................................................................................................................1
1.3 Change History...............................................................................................................................................................1
2 Overview.........................................................................................................................................3
3 Technical Description...................................................................................................................4
4 Parameters.......................................................................................................................................5
5 Counters..........................................................................................................................................6
6 Glossary...........................................................................................................................................7
7 Reference Documents...................................................................................................................8
Issue 01 (2011-04-30)
ii
WCDMA RAN
Active TX Chain Gain Calibration Feature Parameter
Description
1.1 Scope
This document describes WRFD-010211 Active TX Chain Gain Calibration, including its
technical principles.
Feature change
Changes in features of a specific product version
Editorial change
Changes in wording or addition of information that was not described in the earlier version
01 (2011-04-30)
This issue does not include any changes.
Draft B (2011-03-30)
This issue does not include any changes.
Issue 01 (2011-04-30)
WCDMA RAN
Active TX Chain Gain Calibration Feature Parameter
Description
Draft A (2010-12-30)
Compared with Issue 01 (2010-03-30) of RAN12.0, Draft A (2010-12-30) of RAN13.0
optimizes the description.
Issue 01 (2011-04-30)
WCDMA RAN
Active TX Chain Gain Calibration Feature Parameter
Description
2 Overview
Overview
This feature provides high output power accuracy for the NodeB and reduces the margins
required in network dimensioning. Thus, the power can be fully utilized.
Issue 01 (2011-04-30)
WCDMA RAN
Active TX Chain Gain Calibration Feature Parameter
Description
3 Technical Description
Technical Description
The active TX chain gain calibration can increase the accuracy of the downlink transmit power
(for example, the power accuracy of the 3900 series NodeB is 0.6 dB), thus reducing the
protection band reserved for power calculation in network planning and improving the utilization
of transmit power.
Performance drift occurs on all RF hardware. The gain of an RF part (for example, TRX, PA,
RF connector, or duplexer) is related to the temperature, frequency, and lot number. Such a gain
difference leads to a 1.5 dB to 2 dB error in the NodeB transmit power.
The active TX chain gain calibration can reduce the changes in analog channel gains caused by
different temperatures, frequencies, and lot numbers, thus ensuring a stable total gain of links.
The active TX chain gain calibration method calculates the difference between the downlink
input power and transmit power and then adjusts digital channel gains based on the transmit
power on the analog channel. Gain control is performed in real time, thus ensuring the accuracy
of transmit power.
Issue 01 (2011-04-30)
WCDMA RAN
Active TX Chain Gain Calibration Feature Parameter
Description
4 Parameters
Parameters
Issue 01 (2011-04-30)
WCDMA RAN
Active TX Chain Gain Calibration Feature Parameter
Description
5 Counters
Counters
Issue 01 (2011-04-30)
WCDMA RAN
Active TX Chain Gain Calibration Feature Parameter
Description
6 Glossary
Glossary
For the acronyms, abbreviations, terms, and definitions, see the Glossary.
Issue 01 (2011-04-30)
WCDMA RAN
Active TX Chain Gain Calibration Feature Parameter
Description
7 Reference Documents
Reference Documents
Issue 01 (2011-04-30)