Académique Documents
Professionnel Documents
Culture Documents
The TBF drop rate involves the uplink and downlink of the GPRS and EGPRS
services. At the same time, the drop rate can be classified into the N3101,
N3103, and N3105 overflow drops according to the timer.
Majority of the TBF drops is generated because the CS service preempts the
dynamic channels.
1.
When the TBF drop rate is degrading, check the GPRS or the EGPRS
service according to the service type. If a service is faulty, the setting or the
related parameter is incorrect.
2.
If the problem occurs in certain cells, check whether the cell is configured
with the dynamic PDCH. To solve the problem, disable the dynamic PDCH
temporarily (or change the dynamic PDCH into the static PDCH).
3.
If the problem is not caused by the incorrect setting, check whether the
accessibility of each cell is of the same level. Then, determine whether the radio
quality is affected according to the drop rate in the CS domain.
For how to check and process the TBF drop rate, refer to the GSM BSS Network
KPI (TBF Drop Rate) Optimization Manual.
Owing to the unbalanced development of the GPRS service, the KPI in the PS
domain of certain cells in the network cannot reach the standard, especially
when the handover is not enabled in the PS service.As a result, the drop rate is
high in certain cells and the problem cannot be processed.In this case, provides
the carrier with a written report according to the actual condition. You need not
process the problem.
Maximum Value of N3101
Value Range: 8-30
Unit: None
Default Value: 20
Remarks
If this parameter is set to a lower value, the tolerance of the network to
downlink errors decreases and the probability of abnormal downlink TBF
releases increases.
If this parameter is set to a higher value, the network still assigns radio
resources to an MS even though it does not receive a correct packet control
acknowledgment message because of MS activities. Therefore, network
resources are wasted.
Huawei | BSC6000