Académique Documents
Professionnel Documents
Culture Documents
Getting started
Camera control has 2 kinds of protocol.
Serial(RS422)
IPEthernet)
Factory Setting
Initialize
[MENU] -- [SYSTEM] -- [INITIALIZE]
Outlook
Power All On
Select ALL ON by F2
Press F2
Basic Operation
1. How to adjust a camera.
1. Press MENU button and select a function.
Advanced Operation
1. Camera Detailed Setting by OSD
1. Hold down the [CAMERA OSD]
2. Use F1/F2 to select an item.
3. Top Menu
1. Camera Scene
2. System
3. Maintenance
1. Press [Menu]
If [PAGE] button lights on, you cannot switch [ON].
Control Pan/Tilt
Hold down the [PT ACTIVE]
Select a Camera (SELECTION)
Adjust IRIS
ZOOM lever
Adjust FOCUS
Note: Move the camera to the position where you want to limit at first. Limit
position becomes the position where you turn on.
Appendix
Camera OSD
System
Genlock
Output
Other
Maintenance
Firmware Version
IP Network
Initialize
4.
Scene : Scene1 ~ 4
Picture Level
Iris Mode
Shutter Mode
Gain
Frame Mix
ND Filter
Return
R Gain: -150~+150
B Gain: -150~+150
R Pedestal [#]
B Pedestal [#]
Return
Matrix
Pedestal
Matrix
Step/Synchro
Picture
Scene
Brightness
[Linear Matrix]
[Color Correction ]
[Color Correction 2/2]
[Linear Matrix]
Saturation
R-G
R-B
G-R
G-B
B-R
B-G
[Color Correction 1/2]
Saturation
B_Mg
Mg_R
R
R_Yl
Yl
[Color Correction 2/2]
Saturation
Yl_G
G
G_Cy
Cy
Cy_B
B
Phase
Phase
Phase
System (HE120)
Genlock
Horizontal Phase:-206~+49
Horizontal Phase Step:1~10
Output
Format: 1080/59.94i/720/59.94p/1080/29.97PsF/
Down CONV. Mode: Squeeze/SideCut/LetterBox
HDMI Color: RGB-NOR/RGB-ENH/YCbCr422/YCbCr444
Component: Y/Pb/Pr, RGB
Frequency: 59.94Hz/50Hz
Color Bars Setup: Off/On
Other (HE120)
Other 1/3
Other 2/3
Focus Mode:Auto/Manual
Other 3/3
OSD Mix
System
Genlock
Output
Other
Maintenance
Firmware Version
IP Network
Initialize
4.
Contrast
Contrast Mode
Matrix
Scene
Gain: Auto,0dB,3dB,6dB,9dB,12dB,15dB,18dB
AGC Max Gain: 6dB,12dB,18dB
Return
Picture
[1/3]
[2/3]
[3/3]
Saturation
Phase
Saturation
Phase
Saturation
Phase
Axis01
Axis02
Axis03
Axis04
Axis05
Axis06
Axis07
Axis08
Axis09
Axis10
Axis11
Axis12
Axis13
Axis14
Axis15
Axis16
System (HE50)
Genlock
Horizontal Phase:-206~+49
Subcarrier Phase
Coarse: 0.45,90,135,180225,270,315
Fine: =127~+127
Output
Format: 1080/59.94i/720/59.94p/1080/29.97PsF/
Down CONV. Mode: Squeeze/SideCut/LetterBox
HDMI Color:
Other (HE50)
Other
Install Position: Desktop/Hanging
Preset Speed: 1~30
Preset Scope: Mode A/Mode
B/Mode C
Digital Zoom: Enable/Disable
Speed With Zoom POS.
Focus Mode: Manual/Auto
Focus ADJ With PTZ.: Off/On
Return
Other 2/2
What is SCOPE?