Académique Documents
Professionnel Documents
Culture Documents
Subsidiary of NTP
Company Profile
GammaTec was established in 1981 and in 2009 became a subsidiary of the NTP Group of
Companies. Initially the Company only marketed and sold its limited range of NDT Products in
South Africa but, with the lifting of political sanctions on the country in 1994, GammaTec quickly
and successfully made use of the opportunities presented by the NDT Industry and the rest of the
world. Currently we actively export to over 70 countries worldwide. Our Head Office is
situated in Vereeniging, South Africa. Our subsidiary offices in Dubai, Kuala Lumpur, Melbourne and
Brussels provide a high profile ground floor presence in these regions, with key distributors appointed
in various other countries.
The Vereeniging office services South Africa, the rest of Africa and surrounding Islands as well as
the Indian Ocean Rim. The Middle East, Baltic and Caspian are handled from the Dubai office. Our
KL office handles South East Asia and the Far East. Lectromax (Australia) are manufacturers and global
suppliers of Magnetic Particle Bench Units and sell GammaTec products within the Australasian region.
Oserix (Brussels) covers Europe, Canada, United States and Central and South American regions.
The GammaTec range of Non Destructive Testing Equipment, Accessories and Consumables that
are not only stocked, but in many cases manufactured by GammaTec, include the following:
Acoustic Emission;
Automated Systems (Ultrasonic, Phased Array, Eddy Current, Magnetic Particle, Dye
Penetrant);
Coating & Surface Inspection;
Dye Penetrant Inspection;
Eddy Current Inspection;
Magnetic Particle Inspection;
Phased Array Inspection;
Radiographic Inspection (Carestream Industrex Film , X-ray, Gammaray, Radioactive Sources);
Ultrasonic Inspection (Flaw Detectors, Thickness Gauges, Probes) and
Visual Inspection.
We are the authorised distributors for a number of global players including Carestream (Carestream
Industrex Film and Digital CR Systems), Dakota (UT Thickness Gauges), ICM (X-ray), JME (Pipeline
Crawlers), NTP (Isotopes), Oserix (Gammaray Projectors and Sources), Phoenix (UT Scanners and
Transducers), Physical Acoustics Limited (Acoustics), and Sonatest (UT and PA Equipment and
Accessories). Each subsidiary has elctronic and mechanical maintenance departments with qualified and
skilled technicians capable of repairing, maintaining and calibrating the wide range of products we sell.
The Groups highly trained National and International Sales and Administrative Staff allow Customer
enquiries and purchases to be quickly and efficiently executed. Products such as Radioisotopes and
sensitive Ultrasonic Flaw Detection equipment are handled with competent ease.
It's the intention of GammaTec NDT Supplies SOC Ltd to ensure a safe work environment for all
participants involved in the business of NDT, while at the same time providing a suitable return on
investment (ROI) for all stakeholders including the shareholders and staff community of the company.
We strive to be the best provider of NDT equipment and services in the industry. Everyone in
GammaTec is responsible for fully satisfying our customers by meeting or exceeding their needs
and expectations. Our goal is 100% customer satisfaction 100% of the time. The Turnkey One-Stop policy
that Gammatec offers makes it an exciting and interesting organization to deal with and the Group's Motto
of CLIENT IS KING speaks for itself.
PM/GSA/SAL-002.01.011.001-REV-2
Contacts
Gammatec NDT Supplies SOC
Ltd.
Oserix SA
PM/GSA/SAL-002.01.011.001-REV-2
Agencies
PM/GSA/SAL-002.01.011.001-REV-2
Contents
Section
1
1.1
1.2
1.3
2
3
3.1
3.1.1
3.1.2
3.1.3
3.2
3.2.1
3.2.2
3.2.3
4
4.1
4.1.2
4.1.3
4.1.4
4.2
4.2.1
4.2.2
4.2.3
4.3
4.3.1
4.3.2
4.4
4.5
4.6
5
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
6
6.1
6.2
7
7.1
7.2
8
8.1
9
10
11
Inspection Method
ACOUSTIC EMISSION TESTING (AE)
LEAK DETECTION
TECHNOLOGY PACKAGES
GENERAL AE EQUIPMENT
LIQUID PENETRANT TESTING (PT)
ELECTOMAGNETIC TESTING (ET)
EDDY CURRENT
Tube Inspection
Tank Floor Inspection
Portable Eddy Current Inspection
MAGNETIC PARTICLE TESTING (MT)
Bench Units & Coils
Electromagnetic Equipment
Ultraviolet Equipment
RADIOGRAPHIC TESTING (RT)
GAMMA RADIOGRAPHY
Close Proximity Systems
Projector Accessories
Isotope Consumables
X-RAY RADIOGRAPHY
Portable X-Ray Generator
Power Box and Control Panels
Portable X-Ray Crawler Units
DIGITAL RADIOGRAPHY
Digital Radiography (DR)
Computed Radiography (CR)
RADIATION SAFETY
DARKROOM
Radiographic Consumables
ULTRASONIC TESTING (UT)
PHASED ARRAY
PORTABLE FLAW DETECTORS
THICKNESS GAUGES
Ultrasonic Trancducers and Accessories
BOLT TENSION MONITORING
ULTRASONIC TUBE INSPECTION
ULTRASONIC SCANNER
Ultrasonic Accessories
HARDNESS TESTING
EQUIPMENT
GENERAL ACCESSORIES
COATING INSPECTION
HOLIDAY AND PINHOLE DETECTORS
COATING THICKNESS GAUGES
VISUAL INSPECTION
VISUAL EQUIPMENT
INFRARED & THERMAL TESTING
LEAK TESTING (LT)
REPAIRS, SERVICE & CALIBRATION
PM/GSA/SAL-002.01.011.001-REV-2
Equipment
1 -14
1-6
7 - 10
11-14
15
16 - 33
16 - 20
16 - 18
19
20
21 - 33
21 - 27
28 - 30
30 - 33
34 - 84
34 - 51
41 - 42
43 - 48
49 - 51
52 - 58
52 - 55
56 - 57
58
59 - 62
59
60 - 62
63 - 72
73 - 82
83 - 84
85 - 120
85 - 88
89 - 93
94 - 98
99 - 106
107
108
109 - 120
121
122
122
123
124 - 126
124
125 -126
127 - 128
127 - 128
129
129
130
Features
Applications
Applications
Rugged construction
Analog read-out
Low or high temperature probe
Audio monitor (headphones)
PM/GSA/SAL-002.01.011.001-REV-2
Valve- Squeak
Technology Breakthrough in leak Detection
Designed for operations and maintenance personnel to perform frequent valve checks in their
units, Valve-Squeak is an easy-to-use through-valve loss detection system. Small enough to fit
in your pocket, Valve-Squeak isolates leaks of any size and in any valve saving you thousands,
if not millions .
Features
Specifications
PM/GSA/SAL-002.01.011.001-REV-2
Size (LxWxH):
Weight:
Power:
Battery life:
Processor:
Display:
Operating temp:
Storage temp:
Features
Large custom LCD backlit display
Dual frequency range selection
Accepts many types of sensors
Slide-in molded NiMh battery pack
Small, rugged, ergonomic package
Simple, intuitive user interface via a
large button keypad
Bluetooth data transfer
PM/GSA/SAL-002.01.011.001-REV-2
Specifications
Size:
Weight:.
Power Source:
Pack
Battery Life:
LCD:
Backlight:
Wireless Interface Type:
Wireless Interface Range:
Operating Temperature:
Storage Temperature:
4.75 x 1.4 x 7
1 lb.
Nickel Metal Hydride Battery
100 Hours
Transflective LCD on Glass
Blue LEDs with diffuser
Bluetooth Class B
50ft
-15-158 F (-20-55 C)
40-185 F (-40 - 85C)
Features
PM/GSA/SAL-002.01.011.001-REV-2
Specifications
Size (L x W x H): 150 mm x 65 mm x 35 mm
Weight: 0.35 kg
Power Consumption: <20 ma from loop power
Noise: <1.8 V rms RTl with sensor
Operating Temperature: -40 to 70C
Storage Temperature: -40to 85C
Power Requirements: Loop powered, 4-20ma,
11.5-30 volt
4-20ma Output Drive: Corresponds to 0 - 100 dB
AE 1-5 volts with 250 ohm termination
Dynamic Range: >87 dBAE (-0.4 - 3240 litres/min
gas for 3" (76.2mm) ball valve at 10 bar D.P.)
Sensor: 23 mm diameter x 20.5 mm high, sealed,
integral 2m cable,
temp. -40 to 125C
Extreme Temperatures: Waveguide (WG-SCR or
WG-WLD) allows operation from cryogenic
up to 650C
Specifications
PM/GSA/SAL-002.01.011.001-REV-2
Features
Requires only one access point via existing flanges, fittings etc.
Long-range up to 600m from a single access point with a single trace
Fast application immediate on-line results
Detection, location and sizing in a single shot
Portable and battery powered, requires only one operator
Unaffected by bends and is equally effective on straight or complex spiral tubing
Inspects any material and tube sizes from 6 to 500mm bore
High sensitivity blockages and foreign bodies equivalent to 10% and holes of 1%
of the tube cross section are readily detectable in field use and higher sensitivities
are achievable in controlled environments
PM/GSA/SAL-002.01.011.001-REV-2
Features
One-of-a-kind early-detection capability, Pocket
CORPAC is the only nondestructive, on-line
method to detect corrosion phenomena in their
earliest stages. Less than a quarter of the size of
the original CORPAC, Pocket CORPAC was
designed with portability and ease-of-use in mind.
It builds on the original CORPAC, which was
developed over six years in a partnership
between MISTRAS Group, SA (France), the
European chemical industry and a French university, all in conjunction with a European Union
Grant. We take full control of the acoustic signal
processing and automated corrosion type classification. The sleek, updated design can be used for
many applications where portability is important.
With a four-hour battery life and added ability to
operate the unit from battery belt or AC power.
PM/GSA/SAL-002.01.011.001-REV-2
Specifications
Dimensions: 9.5 H x 3.5 W x 1.4 D
(241 mm x 89 mm x 36 mm)
Weight (with batteries): 2.5 lbs. (1.13 kg)
Display: 3.52 Color LCD, QVGA portrait mode,
240 pixels W x 320 H transflective with
LED backlight
Display Touchpad: Built-in touchpad on screen
for use with stylus and
on-screen processing
Storage Memory: 28 Mbytes Flash for OS and data
storage
External Interfaces: Compact Flash port, USB 2.0
Port
Power Consumption: Approximately 4 Watts
Power Requirements:
External DC adapter 12V @ 1A or
Internal 7.2V NiMH battery pack,
rechargeable in-situ or with optional Charger
Battery Life: 4 hours intermittent use
Operating Temp: 23 to 115F (-5 to 45C)
Storage Temp: -4 to 140 F (-20 to 60C)
7
PowerPAC
Acoustic Emission Testing Technology Package
PowerPAC is an Acoustic Emission (AE) technology package for testing power transformers. An
on-line monitoring procedure was developed under an EPRI (Electric Power Research Institute)
sponsored and tailored collaboration with Physical Acoustics Corp. (Project I.D. No. 051481). This
collaboration refined the package with three phases of program develoment resulting in on-line
monitoring of power transformers to detect, locate and assess electrical and thermal faults.AE
sensors are installed on the transformer covering both the tank and the LTC compartment (if one is
present) along with sensors to monitor pump current, fan current, load current, tank wall temperature and LTC compartment wall temperature collecting data for comparison with the AE data during
post test data analysis. In order to observe the effects of a complete load cycle, data is collected
over a period of 24 hours. Results are presented showing the location (in 3-D) and types of faults.
A grading system is used for each fault and provides an overall evaluation of the transformer for
maintenance or operation planning.
Specifications
Features
DiSP-24 Hardened, Portable Computer
PCI/DSP-4 Data Acquisition Boards with up to 8
parametric inputs
R15I-AST sSensors with integral 40dB preamp
Parametric Breakout Box and Parametric Sensors
PowerPAC Software Package
- PowerPAC Data Acquisition and Analysis Software
with 2-D & 3-D Location Software Modules
- AEwin Post Processing Analysis Software
- Database Software with EPRI Cases
- PDDMATE Post-processing software
Documentation
- EPRI Reports Phases I, II & III
- Technical papers
- Case Studies
Three Day Classroom Training (theory) and
Start-up Assistance
10 Days on the Job Training (Field Test)
Consulting Time (Remote and On-site)
PM/GSA/SAL-002.01.011.001-REV-2
Sensor Highway II
Outdoor AE and Sensor Fusion System
The Sensor Highway II (SHII) is an Acoustic Emission (AE) monitoring system with
up to 16 high-speed channels and 16 standard parametric input channels (expandable
to over 100). The system is designed for unattended and remote monitoring use in
structural health, process and condition monitoring applications. It is rated for outdoor
use and comes equipped in a rugged weatherproof NEMA 4 enclosure.
Designed to
Features
Scalable for large channel deployment,
allowing for multiple units to be placed
strategically on asset being monitored
Designed for outdoor environments with
a minimum power dissipation and a
temperature range of (-35 to 70C)
without the need for heaters or air
conditioners
Direct On-Board Terminal Block
connections and DIN rail mounts for
external sensor inputs
Various communication interfaces available
for data communication & remote control
including Ethernet, Wireless, Cellular Modem
and Satellite
Scalable system connecting additional units in
the field and time synchronization options
between remote units
RS-232/485, 4-20mA, Voltage inputs for
sensors
PM/GSA/SAL-002.01.011.001-REV-2
Features
PM/GSA/SAL-002.01.011.001-REV-2
10
Specifications
Features
PM/GSA/SAL-002.01.011.001-REV-2
11
Size:
Weight:
Display:
Display Input:
Memory:
External Ports:
Power Use:
Power:
Battery Life:
Operating Temp:
Storage Temp:
Connectors:
AE
Parametric
AE Channel Description:
and time based features, including waveforms. Through the USB Connector, the AE Node is easily
interfaced to a Notebook or PC running Windows XP or Vista and Physical Acoustics Corporation
(PAC)s well known AEwin or AEwin Lite.
Up to 4 AE Nodes can be controlled by one Notebook or PC. The AE Node can accept single ended or
differential sensors amplified by an internal low noise preamplifier. Additionally, PK Series low power
integral preamp sensors can be used for long distance connections.
Features
Specifications
AE Input:
PM/GSA/SAL-002.01.011.001-REV-2
12
SAMOS
Multi-channel Acoustic Emission System
.SAMOS 32
The SAMOS 32 AE system is geared for laboratory or industrial use, holding up to 4 PCI-8 cards
for up to 32 AE channels of operation. Based on a heavy-duty industrial PC computer chassis, the
SAMOS 32 has added features for reliable day-to-day operation, including extra cooling, ventilation and the latest powerful PC computer. The most economical, high performance AE system
available today, the SAMOS 32 is ideal for users with tight system budgets.
Retaining all the features of a full size AE system, including activity Hit LEDs on the front panel,
the system is also designed to utilize our digitally controlled, full-featured, high fidelity audio monitor (optional). It measures 17W (43cm), 17D (43cm) and 6H (15.2cm), and weighs 26 lbs.
.SAMOS 48
SAMOS 48 is a portable AE system, equipped with a handle for carrying and an integral keyboard built within the hinged front protective cover. Weighing less than 38 pounds with all 48 channels, the SAMOS 48 is 21 long x 14 wide x 7.6 tall. Inside this portable enclosure is a powerful
PC computer, large hard disk, floppy drive, R/W CD/DVD drive and the standard complement of
parallel printer port, serial port, USB and mouse port. Built-in AE features include a digitally controlled audio monitor, up to 8 parametrics and AE Hit indicator LEDs. Expansion and communication options include Ethernet LAN option and optional modem for remote control and communications purposes. Both Internet and Intranet software and interfaces are available.
.SAMOS 112
SAMOS 112 is a large capacity 112-channel system and represents the industrys largest number
of AE channels in a single enclosure. The system comes equipped with an advanced PC based
CPU and all standard peripherals including a LAN connection. Multiple cooling systems make
SAMOS 112 a rugged multi-channel system especially for demanding applications in harsh
environments.
Features
Compact 32 or 48 or 112 channels
of simultaneous DSP based AE
waveforms and features in real time
Operate under advanced AEwinTM
Windows software
Individual 16-bit A/D's on each
channel
PCI Bus for high speeed processing
LAN interface included with optional
network and Internet monitoring
capabilities available
400 kHz bandwidth
Low power consumption, runs cool
Acousto/Ultrasonic systems applica
tions
ISO-9001 certified and CE marked
with low noise
LED AE activity and Super Audio
PM/GSA/SAL-002.01.011.001-REV-2
Specifications
Front Panel activity lights provide
status on AE data as well as to give
you a system diagnostic
All digital, full-featured Audio Monitor
built in and ready for high fidelity
listening (optional).
Auto Sensor testing (AST) standard
with all PAC systems for easy system/
sensor self calibration and interface
coupling efficiency.
Software available for the SAMOSTM
includes the state-of the-art PACwinTM
Software with 25 years of Acoustic
Emission application experience behind
it, this Suite is comprised of three individual software packages (purchased
separately).
13
AEwin
Comprehensive, Versatile & Friendly AE Software
AEwin is a 32-bit MS Windows compatible (XP/Vista/Windows7) software for real-time simultaneous Acoustic Emission (AE) feature and waveform processing, display, fast storage and replay.
Used for true, real-time operation and control with your MISTRAS AE Systems (DiSP, PCI2,
SAMOS, SH II, AE USB Node, Wireless AE Node). The software has full MS Windows resources
including use of any screen size, printing JPGExport, networking, multi-tasking, and multi-processing. AEwin also features complete compatibility with MISTRAS standard data file format (DTA),
allowing you to replay and analyze your previously collected AE files and framework for easily
adding graphs and additional graph screens and user controllable tool bars including setup icons,
acquisition control, line listing, status and statistics.
PM/GSA/SAL-002.01.011.001-REV-2
14
Description
Aluminium Penetrant Sensitivity Test Block
Sherwin PSM-5 Penetrant System Monitor Panel (Polished or Grit)
2.2 CONSUMABLES
ARDROX Consumables
Product Code
Cleaner
NCC0031
NCC0053
NCC0054
Developer
NCD0015
NCD0016
Penetrant
NCP0027
NCP0019
NCP0032
NCP0020
NCP0033
NCP0034
NCP0051
Description
10 x 400mlArdrox 5319
10 x 400ml Ardrox HF-R / 9RP5 Halogen Free
4 x 5 litres Ardrox HF-R / 9RP5 Halogen Free
10 x 400ml Ardrox HF-D / 9D1B Halogen Free
4 x 5 litres Ardrox HF-D / 9D1B Halogen Free
10 x 400ml Ardrox 907PB Red Water Washable
4 x 5 litres Ardrox 907P Red Water Washable
10 x 400ml Ardrox 970P24 Water Washable Fluorescent
1 x 25 litre Drum Ardrox 970P24 Water Washable Fluorescent
10 x 400ml Ardrox HF-P / 996PB Halogen Free
4 x 5 litres Ardrox HF-P / 996PB Halogen Free
1 x 25 litre Drum Ardrox 985P13 Post Emulsifiable Fluorescent
PM/GSA/SAL-002.01.011.001-REV-2
15
Applications
Features
Four frequency simultaneous injection
Up to 5 ft/sec. tube inspection rate
PC based software for acquisition/analysis
Dynamic/user selected gain
Real time mixing
USB interface
1 KHz to 1.2 MHz
User selectable driver output level, 0-9v p-p
Compatibility with bobbin, surface, and magnetic
PM/GSA/SAL-002.01.011.001-REV-2
16
Condensers
Feed Water Heaters
Coolers
Evaporators
Chillers
Features
Real Time 3-D Color Graphic Displays for Data Acquisition and Data Analysis/Display
Inspects Straight Sections and Bends; U-Bends can be inspected with special probes
300-400 tubes average productivity of one system in a 10 12 hour shift
Inspects through scale on the ID or OD
Probe Fill Factor not critical to operations
Numerous Signal Processing Algorithms available for Data Analysis
Windows Based Software
Small, Lightweight, Modular, PC Based Design
110/220V Operation
Probe sizes range from 8.1 mm (0.320 inches) to 152mm (6 inches)
Low Signal to Noise Ratio
Probe lengths of up to 150 feet without signal pre-amplification
System Frequency Range of 5Hz to 30KHz. (lower frequencies are critical for the
inspection of thicker walled Carbon Steel tubing and Air Cooler Fin/Fans)
PM/GSA/SAL-002.01.011.001-REV-2
17
Features
Specifications
PM/GSA/SAL-002.01.011.001-REV-2
18
1 GHz Processor
1 GB ram
16 GB compact flash
Microsoft Windows XP Professional SP3
USB 2.0
Industrial 3 button mouse
5.6 LCD display with VGA controller
AC or DC opera
1 GHz Processor
Specifications
Features
Does not use permanent magnets so lightweight
(under 30 lbs)
Requires minimal floor preparation, no cleaning or
sandblasting of surface and tests through coatings
Determines top surface flaws from bottom surface
flaws
Continues to show flaw responses even after the
unit has stopped moving
Maximum penetration up to 32 mm (1.25 inch)
Scanning speed of 4.5 - 6m (15 20 feet) per
minute
Tests ferrous materials such as carbon steel and
cast iron
Upgradable to test non-ferrous materials such as
stainless steel and aluminium
Real time data display with advanced signal
processing
Wheel assemblies provide easy manoeuvrability
and independent height adjustment
Full coverage over scanned area with no 'dead
space'
PM/GSA/SAL-002.01.011.001-REV-2
19
Specifications
Features
Storage of a great number of setups
and testing results in the flaw detector
memory
Advanced capabilities of data analysis due
to the speciality application-dependent software
Mode of two-way communication with PC USB
Estimate of defect depth and length, and also
LED and sound alarm of the detected flaw
High ergonomics convenient and small
case, small weight, high-contrast TFT display,
assignment of the most frequently used functions
to 'hot keys' of the keyboard, and also the usage
of a special leather cover for handy and secure
holding of the instrument
Large colour high contrast TFT display
Alarm system: 4 three colour LEDs, sound alarm
Possibility of operation in two frequency mode
Possibility of encoder and rotary scanner connection
Possibility of low temperature instrument
implementation
PM/GSA/SAL-002.01.011.001-REV-2
20
Specifications
Specifications (cont'd)
Electronic timer controls the period of the
magnetizing shots for consistent repeatability.
Automatic push button electronic AC
demagnetizing.
Electronic solid state switching for
HEAD/COIL, AC/DC mode selection.
Cable takeoff points for special or off bench
testing,e.g. engine blocks.
Pneumatic end clamp system fitted to both
heads for positive electrical contact.
Easy running tailstock for fast traversing and
fitted with pneumatic lock.
Supplied with adjustable roller steadies to
support cylindrical parts from 50 to 200mm
diameter and up to 1000kg.
20 litre inspection fluid storage system with
efficient jet agitation system suitable for oil or
water based fluids.
The demag cycle is continuously monitored
by a flashing digit and when the cycle is
complete, the digit reverts to a steady state.
PM/GSA/SAL-002.01.011.001-REV-2
21
Specifications (cont'd)
Specifications
Two axis magnetising.Current through part
to locate longitudinal or lengthwise cracks,
and coil magnetising to locate radial or
transverse cracks.
Quick changeover from contact heads to
coil. The selected mode is indicated on the
control display screen.
4500amps AC peak magnetising current.
Optional HWDC in addition to AC.
Automatic push button AC electronic
demagnetizing
The demag cycle is continuously monitored
by a flashing digit and when the cycle is
complete, the digit reverts to a steady state.
Accepts parts up to 1350mm long and
100Kgs in weight on head shelves, and
250Kgs when supported on steadies.
Optional 2000mm capacity. Optional heavy
duty heads to support up to 500Kgs on
steadies 350mm internal diameter coil,
producing up to 12,000 peak ampere turns.
Optional 450mm coil.
PM/GSA/SAL-002.01.011.001-REV-2
22
Specifications (cont'd)
Specifications
Accepts parts up to 1370mm (54 inch) long,
weighing up to 100kgs (225lbs.). Longer
parts can be tested in sections.
High intensity magnetising coil produces
up to 10,000 AC peak ampere turns.
Magnetising coil is sealed and insulated in
an impact resistant oil proof enclosure.
350mm (14") I.D. traversing coil can be
parked at left, clear of supports, to allow
easy loading of part from the front or
overhead.
Simplified electronic control provides a
selection of high or low magnetising
intensities to suit any application.
Magnetising shots are electronically timed,
for consistent results.
Automatic push button AC demagnetising
facility.
PM/GSA/SAL-002.01.011.001-REV-2
23
Specifications (cont'd)
Specifications
PM/GSA/SAL-002.01.011.001-REV-2
24
Features
Highly reliable electronic system, with plug in modules and supported by a 2 year
warranty
Advanced & accurate dual digital ammeter system with a programmed microprocessor
for accuracy and tracking. The required current can be preselected and displayed on
one ammeter, and when a magnetising shot is initiated, the actual current is displayed
on the second ammeter and held on display for approx. 5 seconds for ease of verification.
Magnetising shots are verified by an Illuminated indicator.
In addition to decaying AC demagnetisation, special circuitry enables the most difficult
part to be demagnetised by residual field cancellation.
High quality and rugged construction with stainless steel catchment tank and fluid
reservoir.
A comprehensive range of options and accessories are available to extend the
versatility of the system to suit virtually any testing requirement, including capacities to
accept parts up to 3000mm long and 500kg in weight, and 6000 amp and 7000 amp
power pack upgrades.
PM/GSA/SAL-002.01.011.001-REV-2
25
Features
PM/GSA/SAL-002.01.011.001-REV-2
26
Features
Part No. 150-25-FB Part No. 150 - 30-FB Part No. 150 - 35-FB
Inside diameter: 250mm 300mm 350mm
Outside diameter: 350mm 400mm 450mm
Width: 110mm 110mm 110mm
Weight (approx.): 15kg 19kg 25kg
Peak ampere turns 6000 5000 5000
Duty Cycle (1 min on, 1 min off) 50% 50% 50%
PM/GSA/SAL-002.01.011.001-REV-2
27
Description
110V - Gammatec MK II Articulating Legs
220V - Gammatec MK I Fixed Legs
220V - Gammatec MK II Articulating Legs
110V - Gammatec MK I Fixed Legs
250V - Gammatec MK II Articulating Legs
The new MY-2 is the smallest, lightest hand-held yoke on the market
encapsulation in a rugged rubber housing makes it the most durable too.
The MY-2 electromagnetic yoke is a rugged, high performance instrument
featuring a powerful AC magnetising field.
Product Code
NCY0002
NCY0011
NCY0012
NCY0010
Description
220V Gammatec MY-2 Articulating Legs
110V - Gammatec MY-2 Articulating Legs
240V - Gammatec MY-2 Articulating Legs
42V - Gammatec MK II Articulating Legs
Yoke Accessories
Product Code
NCC0012
NCT0249
NCI0216
NCA0014
NCB0022
Description
Electromagnetic Yoke 12V AC / DC Converter
Electromagnetic Yoke 42V AC Transformer
Portable battery powered inverter 12V DC
220V / AC for MY-2 Yoke
Rubber Magnetic Particle Powder Applicator
Polyethylene Spray Bottle
Portapack
The Gammatec Portapack is a portable battery operated DC power supply for use with all
AC electromagnetic yokes. Charged batteries in special pouches are carried on a belt
worn around the technician's waist. The yoke is plugged into the battery pack allowing the
technician to conduct MPI in hazardous areas or where no power supply exists.
Product Code
NCP0018
NCC0114
Description
Portable battery operated DC supply
Portapack Charger
PM/GSA/SAL-002.01.011.001-REV-2
28
Cases
Product Code
NCC0013
NCC0038
Description
Carry Case for PM2000 Permanent Magnet Yoke
Carry Case for Gammatec MK I, MK II and MY-2
Electromagnetic Yokes
Description
Gammatec PM2000 Articulating Leg Permanent
Magnet Yoke
Gammatec PM2004 Permanent Magnet Yoke
with Cable
Spare Parts
Product Code
NCK0010
NCC0167
NCE0008
SF0051
Description
PM2000/PM2004 Permanent Magnet Keeper c/w spare Magnets
and Feet
MY-2 Yoke Power Cable
MY-2 Yoke Articulating Leg Extension Piece
MY-2 Articulating Foot Piece
Description
Gammatec MPI Centrifuge Stand
Magnetic Particle Centrifuge - ASTM 100ml, pear shaped
Description
Castrol Magnetic Flux Type I (Brass)
Castrol Magnetic Flux Type II (Silver)
ASME Magnetic Particle Field Indicator (Pie Gauge)
Berthold Spoon Magnetic Field Indicator
MTU No. 1 MPI Test Block
Ketos Ring Steel Test Block
Gaussmeters
Product Code
NCM0003
NCM0045
NCP0142
NCI0019
PM/GSA/SAL-002.01.011.001-REV-2
Description
Gaussmeter including Probe
Gaussmeter CYHT201
including Transverse Probe CYPT-T15A
Probe for use with Gaussmeter
Magnetometer Mod 25 Residual Field Indicator
29
Description
18kg MPI Test Weight (with carry case)
4.5kg MPI Test Weight (with carry case)
Consumables
ARDROX Consumables
Product Code
Background
NCB0012
NCB0013
NCB0054
Description
10 x 400ml Ardrox 8903W - White
4 x 5 litres Ardrox 8903W - White
1 x 5 litres Ardrox 8903W - White
Ink
NCI0010
NCI0011
NCI0018
NCI0012
NCI0013
Powder
NCP0023
PM/GSA/SAL-002.01.011.001-REV-2
Description
Gammatec UV 100 Ultraviolet Light (220V)
Gammatec UV 100 Ultraviolet Light (110V)
High Flux Ultraviolet LED Torch Kit
Including:
365nm LED Torch
2 x 3.7V re-chargeable batteries
1 x battery charger
Carry Case
30
Spare Parts
Product Code
SB0047
SL0011
No code
Description
Spare Bulb for UV 100 light
Spare filter lens for UV 100 light
Replacement module for LED UV Torch
Spectacles
Product Code
NCS0037
Description
UV Absorbing Spectacles
Description
Goldilux GAL 3L Display
NCM0023
NCM0025
NCM0004
NCP0029
NCP0109
PM/GSA/SAL-002.01.011.001-REV-2
31
Labino UVG4-HEAD
The Labino UVG4 is a UV LED Head Lamp designed to free the users hands during an inspection.
The lamp can be adjusted in three different angles. The operator can switch the angles of the light
during the inspection. The rubber bands are adjustable and fit helmets as well as heads. The battery
is located in the back of the structure and there are no cables hanging from the lamp.
The UVG4 reach full power instantly. The on/off button is positioned at the back of the lamp to prevent
accidental activation. Each head light weights 271 grams (9.4 oz). The lamp contains one ultraviolet
light emitting diode (LED) that peaks at 365nm. The life of each LED is estimated at 30,000 hours.
The battery has a running time of 3 hours (+/- 5%) and can be recharged from a normal outlet or a
vehicle cigarrette lighter socket. The lamp is also equipped with a current regulator that keeps the UV
intensity constant even when the battery fades. Each unit comes with an extra battery.
The Labino Head Light is also available as white light. This small but powerful tool creates more than
10,000 lux (930 foot Candles) within a distance of one metre. The distribution angle for white light is
spotlight.
Specifications
Features
UV source:
Intensity:
Spotlight:
Midlight:
UV A LED (1)
>35 000 w/cm at 15 cm
25 000 w/cm at 38 cm
14 000 w/cm at 60 cm
8 000 w/cm at 100 cm
>32 000 w/cm at 15 cm
10 000 w/cm at 38 cm
4 500 w/cm at 60 cm
1 800 w/cm at 100 cm
Visible light:
Spotlight:
< 7 Lux (<0.65 fc)
Midlight:
< 5 Lux (< 0.46 fc)
Wave length:
365 nm
Irradiated diameter
at a distance of 38 cm: Spotlight: 30 mm (1.2)
Midlight: 100 mm (3.9)
PM/GSA/SAL-002.01.011.001-REV-2
32
Specifications
Features
Charger for use from electrical outlet
Charger for use in vehicle via
cigarette lighter connection
Two (2) batteries (1+1 extra)
Belt holster
UV Block glasses
PM/GSA/SAL-002.01.011.001-REV-2
33
Features
Specifications
Basic Construction Standards: ISO 3999
compliant
Isotopes:
Ir-192 or Se-75 under special form
Ir-192 half-life: 73.8 days
Se-75 half-life: 119.8 days
Activity:
Ir-192: 4.44 TBq (120 Ci)
Se-75: 4.44 TBq (120 Ci)
Surface Dose Rate: Max 2 mSv/h
Total Weight: 22 kg (48.5 lb)
DU Weight: 13 kg (28 lb)
PM/GSA/SAL-002.01.011.001-REV.-2
34
Specifications
Features
Automatic Source Assembly Locking Mechanism
is triggered by the front of the Source Assembly,
thus ensuring that the Projector can only be locked
and disconnected with the Source in the Safe
PositionThree colour signal indicator system.
PM/GSA/SAL-002.01.011.001-REV-2
35
CP0009
NCP0166
Dual 120/2
Dual 120/1
NCW0001
NCT0035
NCC0180
Quick Coupling
NCG0061
NCP0150
NCT0266
NCP0151
NCC0059
NCT0039
NCS0119
Operations Manual
Exertus Dual 60
Dual 60/1
Dual 60/2
CP0013
Dual 60/1
NCP0166
Dual 60 Pigtail
NCW0001
NCC0180
NCT0039
NCC0171
Quick Coupling
NCG0061
NCP0175
NCC0171
NCT0266
Gammamat Series
NCP0151
NCC0059
NCS0119
Operations Manual
PM/GSA/SAL-002.01.011.001-REV-2
36
Features
Specifications
Basic Construction Standards: ISO 3999 compliant
Isotopes:
Se-75 under special form
Se75 half-life: 119.8 days
Activity:
Se-75: 1.48 TBq (40 Ci)
Se-75: 2.96 TBq (80 Ci)
Se-75: 3.7 TBq (100 Ci)
Surface Dose Rate: Max 2 mSv/h
Total weight:
8.4 kg (18.5 lb)
8.8 kg (19.4 lb)
9 kg (19.84 lb)
Tungsten weight:
4.7 kg (10.36 lb)
5 kg (11 lb)
5.3kg (11.68 lb)
Dimensions (L x W X H): 203 x 110 x 191 mm
Removable Collimator Weight: 4.3 kg (9.4 lb)
PM/GSA/SAL-002.01.011.001-REV-2
37
Features
Automatic Source Assembly Locking Mechanism
is triggered by the front of the Source Assembly,
thus ensuring that the Projector can only be
locked and disconnected with Source in the
Safe Position,Two colour signal indicator system
Specifications
Basic Construction Standards
Isotopes
Se-75
Activity
Se-75
Surface Dose Rate
Total Weight
DU Weight
DU Activity
Dimensions
Length
Width
Height
Materials Used
Outer Shell
Shielding
Source Channel
Type
PM/GSA/SAL-002.01.011.001-REV-2
38
CP0011
Circa 80/1
NCW000
NCT0039
NCC0180
Gammamat Series
SR 17 Pigtail
NCC0170
NCP0151
NCC0305
NCG0061
Operations Manual
NCP0173
SR 17 Pigtail
NCP0151
NCG0061
Gammamat Series
NCC0170 GAM800 Tungsten Directional Collimator 60
NCT0305 Source Terminal SE M18 x 1.5
Operations Manual
Operations Manual
Rid Se 4P
Rid Se 4P/1
CP0012
NCP0173
SR 17 Pigtail
NCC0180
NCP0151
NCP0150
(including)
Operations Manual
PM/GSA/SAL-002.01.011.001-REV-2
39
Features
Specifications
Isotope: Cobalt 60 under special form
Optimal range of thickness (steel): 70 200mm
(2.75 7.87)
Movement of a source along the guide tube:
Horizontally = up to 8.0m
Vertically = up to 4.0m
Overall dimensions (max)
Radiation head: 450 x 270 x 320 mm
(11.71 x 10.63 x 12.59)
Remote control: 850 x 550 x 650 mm
(33.46 x 21.65 x 25.59)
Weight (max):
Radiation head: 180 kg (396.83lb)
Electric-powered electromechanical drive:
38kg (83.777lb)
Power supply: 220V, 50Hz
Power (max): 5000W
Certification: B(U)96
PM/GSA/SAL-002.01.011.001-REV-2
40
The basic package consists of: Circa or RId Se4P Gamma Projector, Close
Proximity Collimator, GammaSafe Clamping Jig and Shielding Mats.
Optional Accessories
Features
Ellipse Stand
Mazel Guide Tubes and Collimator
Mazel Mats eg:
Dimensions: 915 x 305 x 9.5 mm
Shielding: Equivalent to (3.3mm) Pb
Weight: 10.8 kg (approx)
Temperature range: -85C to 200C
PM/GSA/SAL-002.01.011.001-REV-2
41
Rid Se
4P
Circa
Qty
Qty
Code
Product
Rid Se 4P/1
CIRCA 40/80/120 1
Standard Package
NCC0165
NCM0037
NCE0001
NCM0036
NCE0002
NCM0043
NCE0006
10
NCT0169
11
NCC0065
12
SI0017
13
NCC0178
14
NCS0115
15
NCW0003
NCC0146
16
1
1
10
13
1
Lead Shielding Polyurethane and Tungsten Shielding Silicone Mats available on request.
PM/GSA/SAL-002.01.011.001-REV-2
42
14
Features
Specifications
Weight (incl handle): 2.95 kg
Dimensions (l x w h): 152mm x
136mm x 28mm
Cable entry wrap: 270
Cable travel: 348 mm per revolution
Gear: designed for Series 40 cable
Material specifications:
Handle, lid and housing = aluminium
Gear = brass
Bearings = sealed roller bearings
Handle spindle = nylon
Handle pin = tool steel
Guide nipples = stainless steel
Liner = tempered
Optional Accessories
Pistol grip winding mechanism
Customized outer hose (minimum length
7.62m); inner cable
Fittings for all recognized industrial
gamma projectors
PM/GSA/SAL-002.01.011.001-REV-2
43
Length
5.0m
7.62m
10.0m
15.0m
7.62m
10.0m
15.0m
7.62m
10.0m
7.62m
10.0m
15.0m
7.62m
10.0m
Length
5.0m
7.62m
10.0m
15.0m
7.62m
10.0m
7.62m
10.0m
Pistol Grip
Product Code
NCW0041
NCW0011
NCW0012
NCW0037
NCW0009
NCW0010
NCW0013
NCW0014
Description
Pistol Grip for Gammatec Gearbox
Gammatec Winding Mechanism Reel
PM/GSA/SAL-002.01.011.001-REV-2
44
Length
5.0m
15.2m
20.0m
30.0m
20.0m
15.2m
30.0m
15.2m
20.0m
20.0m
30.0m
15.2m
20.0m
GO-NO-GO Gauges
Product Code
NCG0004
Description
Sentinel 880 and Industrial Nuclear GO/NO-GO Gauge
NCG0006
NCG0010
NCG0061
Gearboxes
Product code
Description
NCG0029
PM/GSA/SAL-002.01.011.001-REV.2
45
Drive Hoses
Product Code
NCH0023
NCH0024
NCH0025
NCH0041
NCH0009
NCH0021
NCH0040
NCH0026
NCH0010
NCH0004
NCH0027
Length
5.0m
7.62m
10.0m
15.0m
7.62m
10.0m
15.0m
7.62m Drive
10.0m Drive
7.62m Return
10.0m Return
Description
EXERTUS Series and Gammamat Mod Ti/Tsi/Se Series
Projectors
NCC0025
NCC0091
NCC0147
GAM80 Projectors
Guide Tubes
Product Code
NCT0039
NCT0035
NCT0017
NCT0068
NCT0051
NCT0032
NCT0034
NCT0045
NCT0018
Length
2.1m Yellow
3m Yellow
3m x 3/8 Black
7 (2.1m) x 3/8 Black
5m x 3/8 Black
7 (2.1m) Yellow
3m (Yellow)
3m x 3/8 Black
3m x 1/2 Black
NCT210
7 (2.1m) Yellow
PM/GSA/SAL-002.01.011.001-REV-2
Extension Tubes
Product Code
NCT0003
NCT0013
NCT0030
NCT0017
NCT0039
NCT0035
NCT0041
Length
7 (2.1m) x 3/8 Black
3m x 3/8 Black
7 (Yellow)
3m x 3/8 Black
2.1m Yellow
3m Yellow
7 (Yellow)
Description
NCC0005
NCC0006
NCC0092
Spec 2T Projectors
NCC0148
GAM80 Projectors
NCC0180
Description
NCT0266
NCT0001
NCT0040
Product Code
Description
NCA0013
Adaptor for use with Sentinel Mod 880 Projectors on Tech/Ops Guide
Tubes
Adaptor for use with Gammamat Se Tip to Standard Gammamat
Guide Tube - M14x1 Female / M18x1 Male
Transfer Tube 0.5m (Yellow) for use with 6 channel transfer
containers and Emergency Storage Pots
Spanner for use with Gammamat Mod Ti/Tsi Series Drive Hose and
Guide Tube Quick Couplings
EXERTUS Series 17mm Spanner
A nipple to connect EXERTUS and Gammamat Guide & Extension
Tubes
A nipple to connect Gammavolt / Teletron / Kowolux Guide & Extension
Tubes
NCT0305
NCA0025
NCT0033
NCS0007
NCS0119
SN0007
SN0008
PM/GSA/SAL-002.01.011.001-REV-2
47
Projector Accessories
Centering Devices
Product Code
NCC0014
NCC0102
NCC0109
Description
100 to 750mm Source Centering Device (Pipespider)
350 to 1200mm Source Centering Device (Pipespider)
200 to 900mm Source Centering Device (Pipespider)
Collimators
Product Code
Description
NCC0059
NCC0065
NCC0066
NCC0072
NCC0145
NCC0164
NCC0165
NCC0170
PM/GSA/SAL-002.01.011.001-REV-2
48
Specifications- Ir.192
Nominal Activity:
120 Ci
100 Ci
80 Ci
70 Ci
60 Ci
50 Ci
40 Ci
30 Ci
3 mm x 3.0mm
3 mm x 2.5 mm
3 mm x 2.0 mm
3 mm x 2.0 mm
3 mm x 2.0 mm
3 mm x 2.0 mm
2 mm x 1.5 mm
2 mm x 1.0 mm
PM/GSA/SAL-002.01.011.001-REV-2
49
Description
Dimensions
Description
Dimensions
200Ci Ir.192
3mm x 4mm
200Ci Ir.192
3mm x 4mm
140Ci Ir.192
3mm x 3mm
130Ci Ir.192
3mm x 3mm
130Ci Ir.192
3mm x 3mm
120Ci Ir.192
3mm x 3mm
120Ci Ir.192
3mm x 3mm
110Ci Ir.192
3mm x 2.5mm
3mm x 3mm
100Ci Ir.192
3mm x 2.5mm
100Ci Ir.192
3mm x 2.5mm
3mm x 2.5mm
3mm x 2.5mm
3mm x 2.5mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
3mm x 2mm
2mm x 1.5mm
2mm x 1.5mm
2mm x 1.5mm
2mm x 1.5mm
2mm x 1mm
2mm x 1mm
2mm x 1mm
2mm x 1mm
2mm x 1mm
2mm x 1mm
Description
Dimensions
Dimensions
120Ci Ir.192
3mm x 3mm
100Ci Ir.192
3mm x 2.5mm
20mCi Cs.137
3mm x 2mm
30mCi Cs.137
3mm x 2mm
50mCi Cs.137
2mm x 2.5mm
80mCi Cs.137
2mm x 2mm
100mCi Cs.137
2mm x 1.5mm
10mCi Co. 60
2mm x 1mm
20mCi Co. 60
4.5 x 6 mm Capsule
PM/GSA/SAL-002.01.011.001-REV-2
50
Capsule
Capsule
Type
Type
Used in
Used in
Projector
Projector
Exertus Circa
Dual 120
RidSe4P
Capsule
Type
Used in
Projector
Sentinel
880
Activity
Type
Dimensions
5Ci
Se 75
17
16
GS
10Ci
Se 75
17
16
GS
15Ci
Se 75
17
16
GS
20Ci
Se 75
17
16
GS
25Ci
Se 75
17
16
GS
30Ci
Se 75
17
16
GS
35Ci
Se 75
17
16
GS
40Ci
Se 75
17
16
GS
45Ci
Se 75
17
16
GS
50Ci
Se 75
17
16
GS
55Ci
Se 75
17
16
GS
60Ci
Se 75
17
16
GS
65Ci
Se 75
17
16
GS
70Ci
75Ci
80Ci
85Ci
90Ci
95Ci
100Ci
105Ci
110Ci
115Ci
Se 75
17
16
GS
Se 75
17
16
GS
Se 75
17
16
GS
Se 75
17
16
GS
Se 75
17
16
GS
Se 75
17
16
GS
Se 75
17
16
GS
Se 75
17
16
GS
Se 75
17
16
GS
Se 75
17
16
GS
PM/GSA/SAL-002.01.011.001-REV-2
51
Specifications
SITEX& XS DIRECTIONAL
UNITS
D2008
kV
kV
mA
mA
mA
()
mm
mm
%
C
C
kg/cm2
VDC
mm Fe
choice
mSv/h
70 to 200 70 to 225
1
1
1 to 8
1 to 8
8
8
0.1
0.1
Directional Directional
60 x 40
60 x 40
2.5 x 2.5 2.5 x 2.5
2.5 (Al) + 2.5 (Al) +
0.4 (Ni)
0.4 (Ni)
yes (4 + 1) yes (4 + 1)
100
100
-25 to +70 -25 to +70
-40 to +80 -40 to +80
5.0
5.0
24
24
IP65
IP65
41
49
yes
yes
Axial/Radi- Axial/Radial
al
1
1
2.5
10
yes
yes
346 x
346 x
771
771
28
28
PM/GSA/SAL-002.01.011.001-REV-2
mm
kg
D2258
52
D2506
D3006
70 to 250 90 to 300
1
1
1 to 6
1 to 6
6
6
0.1
0.1
Directional Directional
60 x 40
60 x 40
2.5 x 2.5 2.5 x 2.5
2.5 (Al) + 2.5 (Al) +
0.4 (Ni)
0.4 (Ni)
yes (4 + 1) yes (4 +
1)
100
-25 to +70 100
-40 to +80 -25 to +70
-40 to +80
5.0
5.0
24
IP65
24
54
IP65
yes
70
Axial/Radi- yes
Axial/Raal
1
dial
1
10
10
yes
346 x
yes
346 x
771
28
831
31
D3206
D3605
XS-D2004
XS-D2254
90 to 320
1
1 to 6
6
0.1
Directional
60 x 40
2.5 x 2.5
2.5 (Al) +
0.4 (Ni)
yes (4 + 1)
100
-25 to +70
-40 to +80
5.0
24
IP65
76
yes
Axial/Radial
1
10
yes
346 x
831
31
120 to 360
1
1 to 5
5
0.1
Directional
60 x 40
2.6 x 2.6
2.5 (Al) +
0.4 (Ni)
yes (4 + 1)
60
-25 to +70
-40 to +80
5.0
24
IP65
82
yes
Axial/Radial
1
10
yes
400 x
930
46
70 to 200
1
1 to 4
4
0.1
Directional
60 x 40
2.5 x 2.5
0.4 (Ni)
yes
100
-25 to +70
-40 to +80
5.0
24
IP65
37
yes
Axial/Radial
1 (laser)
2.5
yes
305 x
718
19
70 to 225
1
1 to 4
4
0.1
Directional
60 x 40
2.5 x 2.5
0.4 (Ni)
yes
100
-25 to +70
-40 to +80
5.0
24
IP65
44
yes
Axial/Radial
1 (laser)
10
yes
305 x
718
19
PANORAMIC UNITS
All SITEX and SITEXS units contain a rod anode. This is the focal spot that is outside the SF6-insulated high-voltage generator. As maximum advantages are derived from this ideal configuration,
for one and the same thickness, the volume of lead required for standard radiation protection is
considerably reduced.
Consequently, the reduced weight that is achieved makes it possible for further investments to be
made in the quality and general improvement of the level of performance (robustness, cooling,
accessories etc).
We can confirm that SITEX and SITEXS are among the lightest portable X-ray generators
available to the market.
Specifications
UNITS C1802S
C2007
C2257
kV
mA
mA
mA
()
mm
mm
%
C
C
kg/cm2
VDC
50 to 180
1
1 to 3
2
0.1
Pan.
Orthog.
360 x
(2x20)
4x0.5
Equiv. 3.5
(Al)
50*
-25 to +70
-40 to +80
5.0
24
mm Fe IP65
18
choice yes
Radial
mSv/h 2.5
yes
mm
250 x
kg
653
9.5
70 to 200
1
1 to 7
7
0.1
Pan.
Orthog.
360 x
(2x20)
5x 0.8
2.5 (Al) +
0.4 (Ni)
no
100
-25 to +70
-40 to +80
5.0
24
IP65
36
yes
Axial/Radial
3
2.5
yes
346 x
771
28
70 to 225 70 to 250
1
1
1 to 5
1 to 7
5
7
0.1
0.1
Pan. Orthog.
Pan.
360 x (2x20)
Orthog.
5x 0.8
360 x
2.5 (Al) +
(2x20)
5x 0.8 0.4 (Ni)
2.5 (Al) + no
100
0.4 (Ni)
-25 to +70
no
-40 to +80
100
-25 to +70 5.0
-40 to +80 24
IP65
5.0
48
24
yes
IP65
Axial/Radial
44
3
yes
Axial/Radi- 10
yes
al
346 x 771
3
28
10
yes
346 x
771
28
PM/GSA/SAL-002.01.011.001-REV-2
53
C2505
C3005
C3205
90 to 300
90 to 320
1
1
1 to 5
1 to 5
5
5
0.1
0.1
Pan. Orthog. Pan.
360 x (2x20) Orthog.
5 x 0.8
360 x
2.5 (Al) + 0.4 (2x20)
(Ni)
5 x 0.8
no
2.5 (Al) +
100
0.4 (Ni)
-25 to +70 no
-40 to +80 100
5.0
-25 to +70
24
-40 to +80
IP65
5.0
62
24
yes
IP65
Axial/Radial 66
3
yes
10
Axial/Radial
yes
3
346 x 831 10
32
yes
346 x 831
32
C3605
XS-C2004
XS-C2504
70 to 250
1
1 to 4
4
0.1
Pan.
Orthog.
360 x
(2x20)
5 x 0.8
2.5 (Al) +
0.4 (Ni)
no
100
-25 to +70
-40 to +80
5.0
24
IP65
45
yes
Axial/Radial
10
yes
305 x
718
19
CP200D SITEX
The SITEX CP200D has been designed to revolutionize the handling and the performances
of portable x-ray sets.
Despite our having halved the weight of common 200 kV X-Ray tubes available on the
market, the SITEX CP200D contains a shutter, a laser pointer, a beryllium and aluminium
filters and two integrated diaphragms (customized sizes available on request).
Without compromising ICMs robustness and reliability, the small size and light weight of the
SITEX CP200D will radically change the way that you perform your RT inspections in the
future, impacting positively in terms of both quality and return on investment (ROI).
Features
12 kg tube head
140 x 715 mm length
0.8 mm Be window
900 W anode dissipation
10 to 200 kV range
1 to 10 mA range
1 kV and 0.1 mA steps
100% duty cycle at 30C
Forced air cooled
Gas insulated
V-shaped hand rings
Laser pointer
Shutter & diaphragms
7.9 kg Control unit
PM/GSA/SAL-002.01.011.001-REV-2
Specifications
54
Specifications
Constant potential output 120 kV - 1 mA / 160 kV - 0.5 mA
60 x 60 directional beam
Focal spot of 0.8 mm x 0.5 mm / 0.8 mm x 0.7 mm
7 kg / 9.2 kg including battery pack and handling feature
Extended operation, external power supply options
Optimized for new digital and radiographic imaging media
PM/GSA/SAL-002.01.011.001-REV-2
55
Features
Specifications
PM/GSA/SAL-002.01.011.001-REV-2
56
Features
Being designed on the basis of industrial PC boards
(tropicalised SMD technology) equipped with the 80286
INTEL processor, the SITEX standard control unit offers a
degree of reliability rarely attained with industrial equipment
manufactured in small batches.
Its transistor power circuit enables the operator to have
virtually no knowledge of the characteristics of the network or
the generating set to which it is connected. Like all the
generators in the range, the SCU286 is guaranteed IP65
weatherproof. It achieves all its nominal performances
between -25 and +55C ambient temperature.
Its weight is 14 kg and its ergonomics and robustness are
exemplary.
Specifications
GENERAL
Industrial PC processor/operating system:
INTEL 80486 - 40 HMz / DOS 6
RAM/FLASH memories:
4048kb - 720kb
Internal connectors for graphics card, keypad, HD and FD:
Yes
Resident maintenance softwares:
2 levels
POWER SUPPLY:
Type of power supply:
Mains or power generating set
Supply voltage and frequency ranges:
198 to 264 / 45 to 66 (automatic)
Max. RMS mains current (300 kV / 6mA - SITE-X D3006):
12 at 220 VAC (2600 VA)
Minimum power factor:
>0.7
MEASUREMENT AND CONTROL
Direct kV / mA measurements / Control accuracy:
Yes / 0.5 / -0.5%
Simultaneous display of measurements and settings:
Yes
kV, mA setting steps and exposure times:
1kV / 0.1mA / -0.5s
Useful range of the timer:
1s to 99min 59s
Accuracy of mains control:
0.2%
Measurements and display of mains voltages and frequency:
VRMS, VPEAK, frequency
CONTROLS AND DISPLAY
High brightness green Vacuum Fluorescent Display:
2 x 20 with anti-reflection screen
Polyester alphanumeric keypad with sensory touch and sound effect: 16 keys
Pilot light indicators (on/Xon/fuses):
3
Main rotary switch and security interlock switch:
Yes
Independant START and STOP push buttons:
Yes
Selection of date, time zone and language (Fr,G,D,Nl,I,E):
Yes
3-level optional access codes - non-active by default:
Yes
Automatic preheating time and function of the selected kVs:
Yes
WEIGHT, DIMENSIONS, ENVIRONNEMENT
Total weight:
14kg
Overall dimensions without handle (W x H x D):
355 x 157 x 520mm
Operating temperature range:
-25 to 55C
Storage temperature range:
-40 to 80C
Weatherproof level:
IP65
Carrier handle/support foot/rubber shock absorber:
Yes
PM/GSA/SAL-002.01.011.001-REV-2
57
Specifications
C2504
Output voltage range
UNITS C1802
C2254
70 to 250
Output voltage selection step
kV
50 to 180 70 to 225
1
Tube current range
kV
1
1
1 to 5
Tube current range at full output
mA
1 to 3
1 to 7
3.6
Tube current selection step
mA
2
4
0.1
Radiation geometry
mA
0.1
0.1
Maximum useful angle of X-ray beam
Pan. Orthog.Pan. Orthog. Pan. Orthog.
Dimension of optical focal spot
()
360 x (2x20)360 x (2x20) 360 x (2x20)
5x 0.8
Inherent filtration
mm 4x0.5
5x 0.8
Carrousel of internal diaphragms
mm Equiv. 3.5 2.5 (Al) + 0.4 2.5 (Al) + 0.4
(Ni)
Working cycle at 40C ambient temp.
(Al)
(Ni)
no
Operating temperature range
%
no
no
100
Storage temperature range
C
50
100
SF6 insulation pressure at 20C
C
-25 to +70 -25 to +70 -25 to +70
Cooling fan supply voltage
kg/cm2-40 to +80 -40 to +80 -40 to +80
5.0
Weatherproof level
VDC 5.0
5.0
24
Penetration into steel at max power
48
24
IP65
(FFD=700mm/Film D7pb/D=1.5/T=20 min) mm Fe IP65
IP65
46
Penetration into steel at max power
mm Fe 39
(Dia=6/ D7 / D=2.0 / T=10s)
mm Fe 11
Penetration into steel at max power
11
(Dia=18/ D7 / D=2.0 / T=1min)
Guard rings
no
Position of interconnection socket
choice no
no
Number of telescopic centring device
Free Axial Axial/Radial Axial/Radial
(FFD=700mm)
mSv/h 10
Max. leakage dose at 1m according to DIN at
2.5
10
yes
full output
mm yes
yes
Microcontroller HT measurement circuit (kV kg
124 x 580 248 x 697 248 x 697
28
and mA)
9.5
28
Overall dimensions
Total weight without guard rings
PM/GSA/SAL-002.01.011.001-REV-2
58
C3003
90 to 300
1
1 to 5
3
0.1
Pan. Orthog.
360 x (2x20)
5 x 0.8
2.5 (Al) + 0.4
(Ni)
no
100
-25 to +70
-40 to +80
5.0
24
IP65
54
-
no
Axial/Radial
10
yes
248 x 757
32
C3203
C3603
XS-C2003 XS-C2253
90 to 320
120 to 36070 to 200 70 to 225
1
1
1
1
1 to 5
1 to 5
1 to 4
1 to 4
2.8
2.5
4
4
0.1
0.1
0.1
0.1
Pan. Orthog. Pan.
Pan.
Pan.
360 x (2x20) Orthog. Orthog.
Orthog.
5 x 0.8
360 x
360 x
360 x
2.5 (Al) +
(2x20)
(2x20)
(2x20)
0.4 (Ni)
6 x 1.0 5 x 0.8 5 x 0.8
no
2.5 (Al) + 2.5 (Al) + 2.5 (Al) +
100
0.4 (Ni) 0.4 (Ni)
0.4 (Ni)
-25 to +70 no
no
no
-40 to +80 60
100
100
5.0
-25 to +70 -25 to +70 -25 to +70
24
-40 to +80 -40 to +80 -40 to +80
IP65
5.0
5.0
5.0
58
24
24
24
IP65
IP65
IP65
69
30
37
no
Axial/Radial
no
no
no
10
Axial/Ra- Axial
Axial
yes
dial
248 x 757 2.5
10
32
10
yes
yes
yes
180 x
180 x
280 x
844
844
875
19
19
48
XS-C2503
70 to 250
1
1 to 4
3.6
0.1
Pan.
Orthog.
360 x
(2x20)
5 x 0.8
2.5 (Al) +
0.4 (Ni)
no
100
-25 to +70
-40 to +80
5.0
24
IP65
43
no
Axial
10
yes
180 x
844
19
Features
Applications
PM/GSA/SAL-002.01.011.001-REV-2
59
Specifications
Active area:
40 x 40 cm
Grey scale:
14 bit
Total dimensions: 500 x 560 x 22 mm
Weight:
9 kg
KV limit:
from 20 kV up to
19 MeV
Specifications
Features
PM/GSA/SAL-002.01.011.001-REV-2
60
Specifications
Feed Mechanism
Connectivity
Network
Air Flow:
Scanning Optics
Erase
Maintenance
Calibration
Special Resolution
Software
Filter
Monitor
Chassis
Power
Battery
Battery Life
Warranty
Installation
Dimensions
Weight
PM/GSA/SAL-002.01.011.001-REV-2
61
DR and CR Accessories
Product Code
Description
Systems
HPX-1 system with 5MP monochrome monitor
HPX-1 system with 3MP colour monitor
HPX-1 system with Laptop
1008986
1008911
1008952
Monitors
1008762
1816933
View Stations
1009075
1009026
1009042
Accessories
Cassettes
8582619
1889344
1914316
1735083
1543826
1779461
8423600
Digital Plates
GP
1880723
1017524
1885979
8520454
1355478
8640344
1744390
1008564
8908204
1432772
1124460
HR
8491615
1178565
1597921
1775576
1848688
1174424
8425159
8360521
1434257
8082596
Product Code
1012293
1012277
1008796
1008804
1014265
8454977
PM/GSA/SAL-002.01.011.001-REV-2
XL
1012681
1012582
1012616
1012632
1012640
1012574
1012673
1012665
1012590
1012657
Cm
13x18
10x24
10x40
20x25
18x43
25x30
30x40
35x43
35x91
35x130
35x152
Inch
5x7
4x9.5
4x16
8x10
7x17
10x12
12x16
14x17
14x36
14x51
14x60
Description
INDEX HPX-1 reader Transport Case
INDEX HPX-1 View station transport case
Carrier for small or irregular shaped plates
HPX-1 Diagnostic tool kit
Carestream Industrex HPX-1 Feed Tray
Carestream Screen Cleaner
62
Description
SM-4 Personal Radiation Alarm
Dosimeters
Product Code
Description
NCD0003
NCD0034
NCB0062
NCR0009
NCD0040
Dosimeter Charger
Product Code
NCC0149
Description
Model DCA 909 Pocket Dosimeter charger
PM/GSA/SAL-002.01.011.001-REV-2
63
Description
Gamma ERA99-A Environmental Radiation Alarm
The ERA99-A is a robust, portable unit designed to give
a visible and audible indication of environmental radiation.
In the event of radiation, the unit will automatically switch
to a red flashing beacon and give an audible tone in
excess of 100 db. Various flashing beacon and audible
tone versions are available. Provision is also made for
driving up to five slave units.
Product Code
NCS0045
Description
Gamma ERA99-A Environmental Radiation Alarm
Slave Unit. Similar in appearance to the ERA99-A the
Slave Unit has only a single Red beacon. The Slave
Unit is connected to the ERA99-A by a 10m long cable.
Description
Hazard YELLOW Flashing Light - Battery operated
Hazard RED Flashing Light - Battery Operated
Radiographers Personal Flashing Warning Light - Battery Operated
NCL0018
Description
GAMRAD 2006. 4 ranges 0-1000,0-100,0-10, 0-1.
Readings in mR/hr and Sv/hr. Including calibration certificate
NCM0046
NCM0058
PM/GSA/SAL-002.01.011.001-REV-2
64
Description
NCP0084
NCP0086
NCP0083
NCP0102
NCP0138
NCP0134
NCP0135
NCF0022
Lead Shot
Product Code
NCS0060
Description
Lead Shot (2mm) - 2kg bags
NCS0028
Lead Sheet
Product Code
NCS0031
Description
Lead sheet to suit customer requirements
PM/GSA/SAL-002.01.011.001-REV-2
65
Flags
Product Code
NCF0003
Description
195 x 280mm Triangular PVC Black on Yellow with rope
channel. Magenta Trefoil. (English / Arabic)
NCF0018
Signs
Product Code
NCS0016
Description
Metal - 400 x 500mm DANGER RADIATION - In case of
Emergency - Black on Yellow (English)
NCS0059
NCS0114
NCS0058
NCS0061
NCS0080
Barrier Tape
Product Code
NCT0015
Description
Barrier Tape - 90mm x 75m Roll Heavy duty PVC Black on
Yellow - Anti twist (English)
NCT0136
PM/GSA/SAL-002.01.011.001-REV-2
66
Description
1.0m Long (Special request)
1.5m Long
2.0m Long
3.0m Long (Special request)
Protective Wear
Aprons
Product Code
NCA0010
NCA0011
NCA0016
NCA0017
NCA0018
NCA0019
Description
Single Sided X-Ray Protective Lead Apron - .25mm Pb
Double Sided X-Ray Protective Lead Apron - .25mm Pb
Single Sided X-Ray Protective Lead Apron - .35mm Pb
Double Sided X-Ray Protective Lead Apron - .35mm Pb
Single Sided X-Ray Protective Lead Apron -.50mm Pb
Double Sided X-Ray Protective Lead Apron - .50mm Pb
Collars
Product Code
NCC0077
Description
Lead Lined (Thyroid) .50mm Pb
Gloves
Product Code
NCG0028
Description
Lead Lined Protective Gloves
Shield
Product Code
NCS0104
Description
X-ray Protective Gonad Shield (Set of 3) - .50mm Pb
Spectacles
Product Code
NCS0098
Description
Lead Lined Glasses
PM/GSA/SAL-002.01.011.001-REV-2
67
Features
Motion Detection:
Detection Method:
Detection Range:
Azimuth:
Detection Speed:
Operating Temp:
Applications
Dimensions:
Control Box:
Motion Detector:
Klaxon:
Warning light:
Pyroelectric
0 - 15m
90 Degrees
0.3 3.0 m/s
-30 to + 70C
Power:
Power Supply:
Power Standby:
Power Max:
Operating Voltage:
Battery :
Charger:
68
Description
32 Compartment PVC
Technicians Toolboxes
Product code
NCB0003
Description
48cm High Impact Plastic
Exposure Calculators
Product Code
NCC0064
NCC0071
Description
CDC Gamma Radiation Exposure (Slide Rule Type)
Mobi-Calc
-Calc Gamma Radiography Exposure Time Calculator
(on java application phones)
Magnets
Product code
NCM0001
NCM0002
NCM0010
NCM0022
Description
Eclipse 815 Horseshoe Pull 37kg (max)
Eclipse 816 Horseshoe Pull 47kg (max)
Eclipse 813 Horseshoe Pull 12kg (max)
Eclipse 812 Horseshoe Pull 9.0kg (max)
Lead Markers
Arrows (Sharp)
Product code
NCA0003
NCA0004
NCA0005
Description
6mm
9mm
12mm
Letters A - Z (Sharp)
Product code
NCL0002
NCL0003
NCL0004
Description
6mm
9mm
12mm
Letters A- Z (Flat)
Product code
NCL0012
Description
6mm
Numbers 0 - 9 (Sharp)
Product code
NCN0001
NCN0002
NCN0003
Description
6mm
9mm
12mm
Marker Gun
Product code
NCG0013
NCT0137
Description
Film Marker Gun
White Lead Foil Tape for use with Film Marker Gun
PM/GSA/SAL-002.01.011.001-REV-2
69
Penetrameters
EN 462-1 Wire Penetrameters
Product Code
NCP0008
NCP0012
NCP0015
NCP0076
Description (50mm)
1 Fe EN
6 Fe EN
10 Fe EN
13 Fe EN
NCP0007
NCP0010
NCP0014
NCP0077
1 Cu EN
6 Cu EN
10 Cu EN
13 Cu EN
NCP0009
NCP0011
NCP0013
NCP0078
1 AL EN
6 AL EN
10 AL EN
13 AL EN
NCP0139
NCP0140
NCP0141
6 Ti EN
10 Ti EN
13 Ti EN
Product Code
NCP0106
NCP0107
Description (25mm)
6 Fe EN
10 Fe EN
Product Code
NCP0136
Description (10mm)
13 Al EN
Material Group
01 = Titanium
02 = Aluminium
03 = Magnesium
1 = Steel
2 = Aluminium Bronze
3 = Inconel
4 = Copper
Product Code
NCP0068
NCP0069
NCP0070
NCP0071
Description (50mm)
Set 1A
Set 1B
Set 1C
Set 1D
NCP0122
NCP0123
NCP0124
NCP0125
Set 2A
Set 2B
Set 2C
Set 2D
Product Code
NCP0114
NCP0115
NCP0116
NCP0117
Description (50mm)
Set 01A
Set 01B
Set 01C
Set 01D
NCP0126
NCP0127
NCP0128
NCP0129
Set 3A
Set 3B
Set 3C
Set 3D
NCP0099
NCP0100
NCP0101
NCP0113
Set 02A
Set 02B
Set 02C
Set 02D
NCP0130
NCP0131
NCP0132
NCP0133
Set 4A
Set 4B
Set 4C
Set 4D
NCP0118
NCP0119
NCP0120
NCP0121
Set 03A
Set 03B
Set 03C
Set 03D
PM/GSA/SAL-002.01.011.001-REV-2
70
Description
ID 5 (6.35mm)
ID 7 (8.84mm)
ID 10 (12.70mm)
ID 12 (15.87mm)
ID 15 (19.05mm)
ID 17 (21.59mm)
ID 20 (25.40mm)
ID 25 (31.75mm)
ID 30 (38.10mm)
ID 35 (44.45mm)
ID 40 (50.80mm)
ID 45 (57.15mm)
ID 50 (63.50mm)
Tapes
Adhesive Tape
Product Code
NCT0019
NCT0200
Description
24mm x 40m Roll Masking Tape (36 per box)
Black Light Proof Tape
Description
0.5m
1.0m
1.5m
2.0m
3.0m
4.0m
5.0m
6.0m
10.0m
15.0m
20.0m
PM/GSA/SAL-002.01.011.001-REV-2
10cm SPACING
Product Code
NCT0113
NCT0008
NCT0009
NCT0212
NCT0010
NCT0011
NCT0005
NCT0167
NCT0201
NCT0202
71
Description
1.0m
2.0m
3.0m
4.0m
5.0m
10.0m
12.0m
15.0m
20.0m
25.0m
Measuring Tape
Product Code
NCT0026
Description
3m Stanley Measuring Tape
Stands
Product Code
NCS0057
NCS0097
Description
Gammatec Magnet Stand for Tank Radiography
Magnet Stand
Stopwatches
Product Code
NCW0019
Description
Radiographers Stop Watch
Radiography Consumables
Product Code
NCM0013
NCC0085
PM/GSA/SAL-002.01.011.001-REV-2
Description
Pentel 100W - White Broad Tip Permanent - Sulphur Free
Wax Crayons
72
4.5 DARKROOM
Carestream Industrex M37 Processor
The tabletop INDUSTREX M37 is ideal for automatic processing in mid-volume facilities.
While compact, it offers the output you need and the excellent image quality and reliability
you demand.
The processor ensures totally automatic film handling and supports nine programmablecontrolled processing channels that allows for flexibility in your day-to-day NDT film
production.
Specifications
Features
Ease of operation with 9 programmablecontrolled processing channels
Economical medium-range processor with
capacity of 27 sheets/hour (35 x 43cm) in the
recommended processing cycle
Compact design for smaller labs or environments
Comes with a table stand as standard
Filtered developer solution that reduce film artifacts
Intermediate rinse rack bath system
Can be used in stand-alone darkroom or throughthe-wall installations
Automatic film-in detection utilising a pulsed infrared
sensor bar
Automatic chemical replenishment system for
developer and fixer
Automatic heating for developer and fixer
Automatic anti-oxidation and anti-crystallisation
cycles
Separate drainage for developer, fixer and wash
chemicals
Automatic cleaning cycle
PM/GSA/SAL-002.01.011.001-REV-2
73
Features
Highly advanced infrared film detection
4 sensors for exact conformance for tank
replenishment
Large tank capacity
All processing parameters can be
individually controlled
Economic
High product reliability
Complete set of accessories
PM/GSA/SAL-002.01.011.001-REV-2
Specifications
Film format:
74
Features
PM/GSA/SAL-002.01.011.001-REV-2
75
Densitometers
Lightweight, easy to use portable Densitometers for measuring the transmission density of
x-ray film. These units have been designed for use in on-site mobile darkrooms,
laboratories and offices.
Product Code
NCD0030
Description
Gammatec Mod GD-1A Pencil Type Digital Film
Densitometer
Programmable State-of-the-Art electronics
Zero Button
Backlit display for easy reading
Hold feature for density readings
NCD0021
Film Dryers
Product Code
NCD0035
Features
Low noise, Warm air drying with over-temp protection
Low Maintenance precision gear drive - no worm drive used
Staggered minimum contact roller system ensures safe, clean
and dry x-ray film production.
Lightweight and compact for easy handling
Low power requirements, low operating costs.
Specifications
Max Film Width:
36cm / 14inch
Min Film Length:
10cm / 4inch
Tankbody PA:
wash 3,4 Litre
Dryer Temperature: approx 50C
Water replenishment: automatic bottle feed
Capacity at cycle time in-feed speed
from: 212 sec. 5 cm/min
to: 70 sec. 45 cm/min
(adjustable in 5cm/min steps)
Electr. Power Supply: 230V,N, 50/60 Hz, 1200W
PM/GSA/SAL-002.01.011.001-REV-2
76
Product Code
NCC0105
Description
Manual Film Drying Cabinet
Size 100cm x 60cm x 60cm including Heater Fan,
Thermostat and Timer (capacity 40 hangers)
NCC0141
Flash Identification
Product Code
NCF0020
Description
Film Identification Flasher Unit 25 x 75mm aperture
NCF0021
Description
Goldilux Mod GAL-3L
- White Light Meter
(excluding probe)
Goldilux Mod GAL-2H
White Light Meter
(with built-in detector) High Range
Goldilux Mod GAL-2L
- White Light Meter
(with built-in detector) Low Range
Goldilux Mod GRP-1
- Smart Radiometer with
Microprocessor display (excluding probe)
Goldilux Mod GALP-1 Probe for use with GAL-3L
White Light Meter
Goldilux Mod GLP-1 Smart Radiometer White Light
Probe for use with GRP-1 Microprocessor
Processors
Product Code
NCP0079
Description
AFP Mini NDT Film Processor
PM/GSA/SAL-002.01.011.001-REV-2
77
Accessories
Safelights
Product Code
NCL0009
Description
8 x 10 Pyramid Type including 15W Bayonet Bulb
and Filter lens 220V
Description
NCT0020
NCT0052
NCT0154
NCT0155
NCT0088
NCT0089
NCT0138
NCT0139
Thermometers
Product code
NCT0119
Description
Floating Plastic Spirit Type
Timers
Product code
NCT0014
Description
Darkroom Table Top Timer with Alarm - Battery operated
PM/GSA/SAL-002.01.011.001-REV-2
78
Viewers
Gammatec Industrial Film Viewers provide accurate viewing of gamma and x-ray
radiographs for on-line mobile darkrooms, laboratories and offices. To view the films, the
operator simply switches the unit on, places the film on the 100 x 400 mm illuminated
screen and performs the task required by the procedure.
Masks of various sizes are available on request.
Product Code
NCV0016
Description
Gammatec LED Viewer
Screen Size:
100 x 400mm
Viewing Density: 4.5D
Dimmer Switch:
Yes
Foot Switch:
Yes
Fan:
Yes
Body:
High Impact PVC
Power:
220V
Product Code
NCV0005
Description
Gammatec Industrial Wall Mounted Viewer
Bulbs:
Compact Fluorescent
Screen Size:
350 x 430mm
Viewing Density: 3.8D
Dimmer Module: Yes
Fan:
Yes
Body:
Aluminium Casing
Power:
220V
PM/GSA/SAL-002.01.011.001-REV-2
79
Other Equipment
Product code
NCP0052
Description
Film Chemical Mixing paddle - Perspex
NCS0019
Film squeegee
NCH0019
NCB0024
NCR0005
Silver Recovery
Product Code
NCR0004
Description
Silver Recovery Unit - 10 litre tank - 600 litre plating capacity complete with replacement cell.
Accessories
Product Code
NCS0036
NCG0012
Description
Carestream Calibrated Film Density strip for
Densitometer calibration
Film Cutting Guillotine
NCP0080
Chinagraph Pencils
Film Archiving
Product Code
Kit 1965847
Description
Carestream Thiosulfate Test Kit
PM/GSA/SAL-002.01.011.001-REV-2
80
Film Cassettes
DOUBLE PVC
Product code
NCC0063
NCC0140
NCC0133
NCC0132
NCC0046
NCC0058
NCC0057
NCC0075
NCC0029
NCC0074
NCC0078
NCC0036
NCC0028
NCC0062
NCC0027
SINGLE PVC
Description
50 x 400mm (25 pair / pack)
60 x 400mm (25 pair / pack)
70 x 200mm (25 pair / pack)
70 x 400mm (25 pair / pack)
75 x 400mm (25 pair / pack)
100 x 100mm (25 pair / pack)
100 x 200mm (25 pair / pack)
100 x 240mm (25 pair / pack)
100 x 400mm (25 pair / pack)
100 x 480mm (25 pair / pack)
150 x 400mm (25 pair / pack)
165 x 345mm (25 pair / pack)
180 x 430mm (10 pair / pack)
300 x 400mm (10 pair / pack)
350 x 430mm ( 5 pair / pack)
Product Code
NCC0018
NCC0022
NCC0023
NCC0024
NCC0125
NCC0026
NCC0003
NCC0004
NCC0124
NCC0015
NCC0107
NCC0016
NCC0067
NCC0113
NCC0120
NCC0121
NCC0143
NCC0122
NCC0123
NCC0115
RIGID CASSETTES
Product Code
NCC0150
NCC0151
NCC0152
NCC0153
NCC0154
Description
18 x 24cm Aluminium
24 x 30cm Aluminium
30 x 40cm Aluminium
35 x 35cm Aluminium
35 x 43cm Aluminium
Description
70 x 150mm (25 per / pack)
70 x 200mm (25 per / pack)
70 x 240mm (25 per / pack)
70 x 300mm (25 per / pack)
70 x 400mm (25 per / pack)
70 x 480mm (25 per / pack)
100 x 140mm (25 per / pack)
100 x 150mm (25 per / pack)
100 x 160mm (25 per / pack)
100 x 200mm (25 per / pack)
100 x 240mm (25 per / pack)
100 x 300mm (25 per / pack)
100 x 400mm (25 per / pack)
100 x 480mm (25 per / pack)
150 x 200mm (25 per / pack)
150 x 400mm (25 per / pack)
180 x 430mm (10 per / pack)
200 x 300mm (25 per / pack)
300 x 400mm (10 per / pack)
350 x 430mm ( 5 per / pack)
Description
Stainless Steel - 70mm x3m
Stainless Steel - 70mm x 5m
Stainless Steel - 100mm x 3m
Stainless Steel - 100mm x 5m
NCR0005
PM/GSA/SAL-002.01.011.001-REV-2
81
Description
100 x 200mm (Yellow) (25 p/pk)
100 x 240mm (Yellow) (25 p/pk)
100 x 480mm (Yellow) (25 p/pk)
70 x 25m Roll (Yellow)
Description
60 x 240mm Triple Channel
60 x 400mm Triple Channel
70 x 400mm Triple Channel
100 x 200mm Triple Channel
100 x 240mm Triple Channel
100 x 400mm Triple Channel
100 x 480mm Triple Channel
150 x 400mm Double Channel
180 x 430mm Double Channel
300 x 400mm Single Channel
350 x 430mm Single Channel
Hanger Clips
Product code Description
NCC0037
Bar Film Hanger Clip
NCC0089
Bottom Weight Clip for Bar
Hanger
Standard 0.10mm
Description
50 x 400 (25 pair / pack)
100 x 100 (25 pair / pack)
100 x 200 (25 pair / pack)
100 x 240 (25 pair / pack)
100 x 400 (25 pair / pack)
100 x 480 (25 pair / pack)
114 x 127 (25 pair / pack)
130 x 180 (25 pair / pack)
180 x 240 (10 pair / pack)
180 x 400 (10 pair / pack)
180 x 430 (10 pair / pack)
203 x 254 (25 pair / pack)
300 x 400 ( 5 pair / pack)
350 x 430 ( 5 pair / pack)
Standard 0.20mm
Standard 0.30mm
Description
100 x 200 (25 pair / pack)
100 x 400 (25 pair / pack)
Description
100 x 240 (5 pair / pack)
100 x 400 (5 pair / pack)
180 x 430 (5 pair / pack)
350 x 430 (5 pair / pack)
PM/GSA/SAL-002.01.011.001-REV-2
82
Film-6095954
Film-6095616
Film-5269618
Film-5229760
Film-6095715
Film-5229786
Film-1447655
Film-6095707
Film-6549471
AA400 9 x 12 Nif
AA400 10 x 20 Nif
AA400 10 x 24 Nif
AA400 10 x 40 Nif
AA400 10 x 48 Nif
AA400 15 x 40 Nif
AA400 18 x 43 Nif
AA400 30 x 40 Nif
AA400 35 x 43 Nif
Film-6041289
Film-5244454
Film-6095756
T200
T200
T200
Film-6095632
Film-5269592
Film-5235874
Film-6095640
Film-5240148
Film-5235890
Film-6549455
MX125 10
MX125 10
MX125 10
MX125 10
MX125 15
MX125 18
MX125 35
Film-6095806
Film-5251996
20
24
40
48
40
43
43
Nif
Nif
Nif
Nif
Nif
Nif
Nif
(100
(100
(100
(100
(100
(100
(100
PM/GSA/SAL-002.01.011.001-REV-2
AA400 10 x 20 PB
AA400 10 x 24 PB
AA400 10 x 40 PB
AA400 10 x 48 PB
AA400 30 x 40 PB
AA400 35 x 43 PB
Contactpak
Contactpak
Contactpak
Contactpak
Contactpak
Contactpak
(50
(50
(50
(50
(50
(50
Sheets
Sheets
Sheets
Sheets
Sheets
Sheets
per
per
per
per
per
per
Box)
Box)
Box)
Box)
Box)
Box)
PB
PB
PB
PB
PB
PB
Contactpak
Contactpak
Contactpak
Contactpak
Contactpak
Contactpak
(50
(50
(50
(50
(50
(50
Sheets
Sheets
Sheets
Sheets
Sheets
Sheets
per
per
per
per
per
per
Box)
Box)
Box)
Box)
Box)
Box)
83
Film-5054788
Film-5244629
Film-5240957
Film-5235924
Film-5240965
Film-5058961
Film-5278270
Wipes-5280094
Strip-5261326
Carestream Wipes
Pre-Exposed Control Strips 6 x 24
GP - General Purpose
GP Imaging Plate 10 x 24cm
GP Imaging Plate 10 x 40cm
GP Imaging Plate 35 x 43cm
Plate-1178565
Plate-1597921
Plate-1174424
Plate-8425159
Plate-8360521
HR - High Resolution
HR Imaging Plate 10 x 24cm
HR Imaging Plate 10 x 40cm
HR Imaging Plate 25 x 30cm
HR Imaging Plate 30 x 40cm
HR Imaging Plate 35 x 43cm
PM/GSA/SAL-002.01.011.001-REV-2
84
Features
Portable
2 separate conventional channels providing
simultaneous Phased Array & TOFD scanning
Real Time Focal Law calculations allow user
to change scanning parameters instantly
Fast data recording
Unique 3D ScanPlan view giving immediate
visual confirmation of correct set up and
ultrasound coverage
Simple to use interface with integrated Help
and Wizards guide
Scroll wheel technology for Menu navigation
Rugged housing design IP67 standard for
water and dust ingress and employing internal
shock mounts to withstand impacts
Colour transflective TFT LCD providing high
visibility in all conditions, with the highest
display to size ratio of any field instrument
VEO batteries up to 6 hours use, hot
swappable for continuous use
Measurement and sizing of indications can be
quickly achieved through use of advanced
measuring tools such as Hyperbolic Cursors
for TOFD and Peak Signal measurements for
the 2D cursors resulting in quick report
generation on board and stored as PDFs to
the USB data key
PM/GSA/SAL-002.01.011.001-REV-2
Specifications
Configuration 16:64 (16 pulser / receivers, driving
up to 64 elements)
Transducer Socket: I-PEX
Pulse Voltage: -50 V to 100V (in steps of 10V)
Architecture: Full digital delay and sum architecture
Digitizing Frequency: 50 / 100 MHz
Digitizer Resolution: 12 bits
Data Processing: 16 bits samples
Data Recordings: Full raw data recorded
Max A-Scan Length: 8192 samples (32 metres in
steel LW, 50 MHZ, 1:128)
Supported Scans: S-Scan and L-Scan
Real Time Views: S, L, B, C-Scan, Top and End view
Colour Maps: 8 Standards
Multi Group: Multiple Sector scans and TFOD
Conventional UT / TOFD (Mono element channels)
No of Channels 2 TX/RX (2 multiplex channels)
Test Mode Pulse-Echo, transmit/receive, TOFD
DAC Quantity: 1 with 3 sub-DAC (per focal law in PA)
Time Corrected Gain (TCG)
A-Scan Gates: 4 gates per A-Scan
85
Specifications
Configuration
Test Mode
Transducer
Pulse Voltage
Pulser
2 UT Channels
Pulse-Echo, Transmit/Receive and TOFD
Socket LEMO 1 or BNC
-100 V to -450 V (in steps of 10 V)
Pulse width adjustable from Spike to 2000ns
(2.5ns resolution)
PRF
3 Hz to 5 kHz
Pulse Shape
Negative Square Wave (with ActiveEdge)
Pulse Width
Adjustable: 25ns to 2000ns (2.5 ns resolution)
Edge Time
15 ns in 50 load @200 V
Output Impedance 5
Synchronisation
Encoder or free-running (time based)
Focus Delay Range n/a
Damping Resistor Selectable: 50 or 400
PM/GSA/SAL-002.01.011.001-REV-2
86
C-Clamp Encoder
Versatile Waterproof Wheel Encoder
The C-Clamp Encoder is a universal accessory for single axis inspections requiring no
tools for setup and operation. The two clamping arms adjust up to 55mm separation to fit
around a broad range of ultrasonic transducers and phased array wedges. The C-Clamp
Encoder arms can be quickly adjusted to the transducer or wedge width and then locked
and clamped with thumbscrews. The waterproof wheel encoder is then fitted either behind
or alongside the clamp dependent upon the inspection needs. The encoder is spring
loaded onto the surface with the spring tension adjustable via the attachment thumb
screw.
Specifications
Features
Simple: Economical solution that requires no tools to set
up
Precise: High resolution encoded scans for single axis
applications
Versatile: Fully adjustable for any transducer or wedge
up to 55mm wide
Strong clamp mechanism ensures no lateral movement
of encoder when scanning
Encoder is offset from the inspection area to reduce the
risk of the wheel skidding on couplant
Waterproof
Adjustable spring loading guarantees encoder always
stays in contact with inspection surface
Compact design allows use in areas with limited access
Can be used with any instrumentation
PM/GSA/SAL-002.01.011.001-REV-2
87
Tracer
Portable C-Scan Mapping System
Tracer is a versatile freehand scanning system that calculates and outputs accurate X-Y positional
data for C-scan inspections without the constraints of a scanning frame. Tracer is ideally suited to
operate with linear array probes to provide a fast, simple and flexible portable C-scan inspection
kit. Tracer comprises two wire encoders both linked to the probe being scanned. The output from
the encoders passes to an interface unit which then calculates and provides the X-Y encoder
values for your instrumentation. The encoders can be mounted anywhere close to the inspection
site permitting set up on or near to the component, or around obstructions. They come with three
snap fit mounting options for different surfaces: vacuum cup, magnet and clamp. The mounts can
be used to fix the encoders upright, on their side or even inverted. The wire encoders are then
attached to a c-clamp which is able to grip any probe or wedge up to 55mm wide. Tracer can be
used on an inspection area of up to 2m x 2m from a single position. It is also possible to set up an
inspection area at any angle relative to the location of the encoders. This enables C-scan inspection in difficult to access areas. Tracer does not lose position when the probe is lifted off the
surface and then replaced, therefore maximum scan coverage is achieved up to and around
obstructions. Tracer can be connected to any instrument capable of recording two axes of encoder
information. It is powered through the encoder 5V supply and requires no other power source.
Features
PM/GSA/SAL-002.01.011.001-REV-2
88
Specifications
Features
Lightweight Ergonomics
AVG Navigation innovative rotary control for
fast, single handed menu selection and setting
changes
Direct Access Keys
User Buttons can be assigned directly to menu
items or actions
High Visibility Display colour transflective TFT
display
Robust and adaptable
SDMS Lite (Data Management Software)
Flaw Sizing (DGS / AVG, AWS, API) Optional
DAC
Advanced Thickness Logging
B-Scan
Active Peak
Configurable Menu System
PM/GSA/SAL-002.01.011.001-REV-2
89
Test Range
Velocity
Test Modes
D-10 +
0-5mm up
to 5 000mm
1000-9999m/s
D-20 +
0-5mm up
to 5 000mm
1000-9999m/s
Sitescan 123 W
Sitescan
0-5mm up
to 10 000mm
1000-9999m/s
150 S
Sitescan
250 S
0-5mm up
to 10 000mm
0-5mm up
to 10 000mm
1000-9999m/s
1000-9999m/s
Masterscan 350 M
Masterscan 380 M
0-1mm up
to 20 000mm
0-1mm up
to 20 000mm
P.R.F
Frequency Range
35 - 500 Hz
35 - 500 Hz
35 - 1000 Hz
35 - 1000 Hz
35 - 1000 Hz
5 - 5000 Hz
5 - 5000 Hz
Display
Broadband 1 10 Mhz
Broadband 1 10 Mhz
Broadband 1 10 Mhz
Broadband 1 10 Mhz
Broadband 1 10 Mhz
Narrow bands:
0.5Mhz, 1Mhz,
2.25Mhz, 5Mhz,
10Mhzm, 15 Mhz
Narrow bands:
0.5Mhz, 1Mhz,
2.25Mhz, 5Mhz,
10Mhzm, 15 Mhz
Gates
Colour TFT
Colour TFT
Colour TFT
Colour TFT
Colour TFT
Pulser
AGC
independent gate,
gate 2 optional
independent gate,
gate 2 optional
2 fully independent
gates
200 Volt peak
amplitude
2 fully independent
gates
200 Volt peak
amplitude
2 fully independent
gates
200 Volt peak
amplitude
Colour TFT
2 fully independent
gates
100 - 350 V Square
wave pulser
Colour TFT
2 fully independent
gates
100 - 450 V Square
wave pulser
DAC
Yes (Optional)
Yes (Optional)
No
Yes
Yes
Yes
Yes
AWS
Yes (Optional)
Yes (Optional)
Yes
Yes
Yes
Yes
Yes
API
Yes (Optional)
Yes (Optional)
No
Yes
Yes
Yes
Yes
TCG
Yes (Optional)
Yes (Optional)
No
Yes
Yes
Yes
Yes
Yes
Yes
No
AVG/DGS
Auto Cal
Yes (Optional)
Yes
A-Scan Memory
Yes (Optional)
No
No
Yes
Yes
Yes (Optional)
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Panel Memory
5 000 A-Scans
5 000 A-Scans
No
800 Waveforms
800 Waveforms
800 Waveforms
Thickness logging
100 Calibration
Stores
100 Calibration
Stores
100 Calibration
Stores
100 Calibration
Stores
100 Calibration
Stores
100 Calibration
Stores
Warranty
No
1 year
1 Year
2 Years
2 Years
90
PM/GSA/SAL-002.01.011.001-REV-2
2 Years
2 Years
Yes
800 Waveforms
100 Calibration
Stores
8000 readings stored
in block/location
2 Years
Specifications
Test Range 0-1mm(0.05in) up to 0-20,000 mm(800 in.)
in steel at 5930m/s (19455f/s)
Velocity 256 - 16000 m/s continuously variable.
Probe Zero 0 to 999.999 s.
Delay 0-20,000m (800in) in steel at 5930m/s.
Gain 0 to 110dB adjustable in 0.1, 0.5, 1, 2, 6,14 and 20dB steps.
Test Modes Pulse echo and transmit/receive.
Single Crystal, Double Crystal and Pitch-Catch.
Damping 50 and 400 Ohm damping selectable.
Pulser 100-450V -ve spike and square wave. Pulse Width from 30nS to
2500nS.
Rise/Fall times <5nS into 50R load. Tunable.
Active Edge TM Unique Active Edge Mode for improved near-surface
resolution.
P.R.F Adjustable 5Hz to 5kHz. External sync also available.
Screen Update Rate 60Hz
Rectification RF, Full wave, +ve half-wave and -ve half-wave.
Frequency Range 8 selectable filter bands.
i) 100kHz - 500kHz ii) 200kHz - 800kHz
iii) 0.4MHz - 1.6MHz iv) 1.4MHz - 3MHz
v) 3MHz - 8MHz vi) 7MHz - 15MHz
vii) 9MHz - 21MHz viii) 1.6 MHz - 22 MHz (Wideband)
Additional tuned low frequency pre-amp with Dryscan option.
PM/GSA/SAL-002.01.011.001-REV-2
91
Specifications
Test Range 0-5mm(0.25in)up to 0-10,000mm (400 in.) in
steel at 5930m/s (19455f/s)
Velocity 1000 - 10,000 m/s continuously variable.
Probe Zero 0 to 999.999 s.
Delay 0-10,000m (400in) in steel at 5930m/s (19455f/s)
Gain 0 to 110dB adjustable in 0.5, 1, 2, 6,10, 14 and 20dB
steps.
Test Modes Pulse echo and transmit/receive.
Pulser 200V fixed. 50nS square wave.
Rise/Fall times <5nS into 50R load.
Damping 50 and 400 Ohm damping selectable.
Active Edge TM Unique Active Edge Mode for improved
near-surface resolution.
P.R.F Adjustable 5Hz to 1kHz. External sync also available.
Screen Update Rate 60Hz
Rectification RF, Full wave, +ve half-wave and -ve
half-wave.
Frequency Range 1.0MHz to 14MHz
System Linearity Vertical = 0.5% Full Screen Height (FSH).
Horizontal +-0.2% Trace Full Screen Width (FSW).
Reject (Selectable) Up to 80% Linear reject
(removes baseline noise without affecting indication amplitude)
Or Up to 50% Suppressive reject
(increase zero offset and reduces amplitude of all echoes)
LED Warning when active.
Units Metric (mm), Imperial (in).
Display Colour Transflective VGA (640 x 480) TFT
Display area: 116.16 x 87.2 mm (4.57 x 3.43 in).
A-Scan Area: 400 x 510 pixels (normal), 460 x 620 (FS).
Colours: 9 colour options with variable brightness
PM/GSA/SAL-002.01.011.001-REV-2
92
Sitescan
D50/500
VGA
60Hz
8
110dB
0.5dB
0 to 393
0.039 - 0.3936
0 to 197
mm/inch
Single/Double
35 - 1000
200
Fixed (50ns)
50/400
xed
"+-/Full/RF"
Sitescan 123w
1/4 VGA
50/60Hz
8
110dB
0.5dB
0 to 393
0.039 - 0.3936
0 to 393
mm/inch
Single/Double
35 - 1000
200
Fixed
Fixed
Fixed
"+-/Full"
Sitescan 150
1/4 VGA
50/60Hz
8
110dB
0.5dB
0 to 393
0.039 - 0.3936
0 to 393
mm/inch
Single/Double
35 - 1000
200
Fixed
Fixed
Fixed
"+-/Full/RF"
Sitescan D10+
VGA
50/60Hz
8
110dB
0.5dB
0 to 197
0.039 - 0.3936
0 to 197
mm/inch
Single/Double
35 - 1000
200
Fixed
50/400
No
"+-/Full/RF"
FilterBands
Reject
Contouring
Display Trace
1-15MHz
50% Suppresive
xed
Smooth/Fill
1-10MHz
50% Suppresive
xed
Smooth/Fill
1-10MHz
50% Suppresive
xed
Smooth/Fill
1-15MHz
50% Suppresive
xed
Smooth/Fill
1/2/5/Wide
50% Suppresive
Auto with band
Smooth/Fill
Update Mode
Keylock
Gate 1 Zoom
Gate 2 Delay
Angle Meas. Mode
DAC
TCG
BWE
AWS/API
AVG/DGS
IFT
Corrosing Mapping
Split DAC & DGS/AVG
Dryscan Function
Freeze/Peak Trail
Yes
Yes
No
Yes
Yes (Standard)
Option
Option
Option
Option
Option
Option
Option
No
Freeze/Peak
Yes
No
No
No
Yes
No
No
No
No
No
No
No
No
Freeze/Peak
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
No
No
No
Freeze/Peak Trail
No
Yes
No
No
Yes
No
No
Option
Option
No
Option
No
No
Freeze/Peak
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
No
No
No
PM/GSA/SAL-002.01.011.001-REV-2
Sitescan 250
1/4 VGA
50/60Hz
50/60Hz
8
110dB
0.5dB
0 to 393
0.039 - 0.3936
0 to 393
mm/inch/us
Single/Double
35 - 1000
200
Auto 30-250nS
Fixed
Fixed
"+-/Full/RF"
Sitescan D20+
VGA
50/60Hz
8
110dB
0.5dB
0 to 197
0.039 - 0.3936
0 to 197
mm/inch
Single/Double
35 - 1000
200
30-500nS
50/400
No
"+-/Full/RF"
1/2/5/Wide
50% Suppresive
Auto with band
Smooth/Fill
Masterscan D70
VGA
60Hz
8
110dB
0.1dB
0 to 787.1
0.098 to 630
0 to 787.1
mm/inch/us
Single/Double/TxRx
5-5000Hz
100 - 450
30-2500nS
50/400
Yes
"+-/Full/RF"
0.25/0.5/1/2/5/10/15/
Wide
Selectable
Manual
Smooth/Fill
Masterscan 700
VGA
60Hz
8
110dB
0.1dB
0 to 787.1
0.098 to 630
0 to 787.1
mm/inch/us
Single/Double/TxRx
0-5000Hz
100 - 450
30-2500nS
50/400
Yes
"+-/Full/RF"
0.25/0.5/1/2/5/10/15
/Wide
Selectable
Manual
Smooth/Fill
Masterscan 350
1/4 VGA
50/60Hz
8
110dB
0.1dB
0 to 787.1
0.098 to 630
0 to 787.1
mm/inch/us
Single/Double
15 - 5000
100-350
30-2000nS
Fixed
Yes
"+-/Full/RF"
0.5/1/2/5/10/
Wide
80% Linear
Manual
Smooth/Fill
Masterscan 380
1/4 VGA
50/60Hz
8
110dB
0.1dB
0 to 787.1
0.098 to 630
0 to 787.1
mm/inch/us
Single/Double
15 - 5000
100-450
30-2000nS
Fixed
Yes
"+-/Full/RF"
0.5/1/2/5/10/
Wide
80% Linear
Manual
Smooth/Fill
Dryscan 410
1/4 VGA
50/60Hz
8
110dB
0.1dB
0 to 787.1
0.098 to 630
0 to 787.1
mm/inch/us
Single/Double
35 - 5000
200-450
30-2500nS
Fixed
Yes
"+-/Full/RF"
0.25/1/2/5/10/
Wide
80% Linear
Manual
Smooth/Fill
Powerscan 450
1/4 VGA
50/60Hz
8
110dB
0.5dB
0 to 787.1
0.098 to 630
0 to 787.1
mm/inch/us
Single/Double
5 - 500 Hz
100-450
30-2500nS
Fixed
Yes
"+-/Full/RF"
0.25/1/2/5/10/
Wide
80% Linear
Manual
Smooth/Fill
Freeze/Peak Trail
No
Yes
No
No
Yes
Yes
No
Option
Option
No
Option
No
No
Freeze/Peak Trail
Yes
Yes
No
Yes
Yes
Option
Option
Option
Option
Option
Option
Option
Option
Freeze/Peak Trail
Yes
Yes
No
Yes
Yes
Option
Option
Option
Option
Option
Option
Option
Option
Freeze/Peak
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
Freeze/Peak
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Freeze/Peak
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
No
No
Yes
Freeze/Peak
Yes
Yes
No
No
Yes
Yes
Yes
No
Yes
No
No
Yes
No
93
Specifications
Features
Flaw Detector:
Sizing toolkits: DAC, AWS, TCG, DGS
Exceptional visibility in sunlight (AMOLED)
colour VGA display (320 x 240 pixels)
P.R.F. 8 to 333 Hz, adjustable
Screen refresh rate: adjustable 60 & 120 Hz
Detection: Z-Cross, Flank & Peak
Thickness Gauge:
Automatic: probe zero, probe recognition and
temperature compensation
Measurement: variety of modes to address a
number of applications
Large data storage with multiple formats:
Alpha numeric grid and sequential w/auto
identifier
Up to 12 hours of battery life using 3 AA cells
Windows PC interface software included
PM/GSA/SAL-002.01.011.001-REV-2
94
Specifications
Features
Measurement modes: Pulse-Echo, PulseEcho w/coating, Pulse-Echo w/temperature
compensation, Echo-Echo & coating only
Automatic: probe zero, probe recognition
and temperature compensation
Stores up to 64 custom setups for specific
applications
High Speed Scan of up to 40 readings
per second
Audible / visual alarm with hi and lo limit
settings
Built-in differential mode for QC inspections
Time based B-Scan feature for cross section
material scans
Data storage formats: Alpha numeric grid and
sequential w/auto identifier
Windows PC Software included
2 year limited warranty
PM/GSA/SAL-002.01.011.001-REV-2
95
Display
Views
NO
YES
Digital
read out
YES
NO
NO
Digital
read out
YES
YES
Digital
read out
YES
Digital
read out
Interface to
Echo &
Echo to Echo
Digital
read out
125010 000
m/s
Interface to
Echo &
Echo to Echo
YES
YES
YES
Digital
read out
0.01mm
125010 000
m/s
Interface to
Echo &
Echo to Echo
YES
YES
0.01mm
125010 000
m/s
Interface to
Echo &
Echo to Echo
YES
Product
Code
Gauge
Range
Resolution
Velocity
Range
NCG0060
MX-1
0.63 500mm
0.01mm
125010 000
m/s
Interface to
Echo
NO
NO
NO
NCG0026
MX-3
0.63 500mm
0.01mm
125010 000
m/s
Interface to
Echo
NO
NO
NCG0042
MX-5
YES
0.01mm
NCG0037 MX-5DL
NCG0039
MMX-6
0.63 500mm
2.54 25.4mm
NCG0035
Px7
NCG0038 PX7-DL
NCP0089
NCG0048
MVX
CMX
NCG0049 CMX-DL
0.15 25.4mm
0.15 25.4mm
0.63 254mm
12500.01mm 9 999m/s
0.63 508mm
Measuring
Mode
Pulse to Echo
& Echo to
Echo
0.01mm
125013 995
m/s
Pulse to Echo
& Echo to Echo
& Echo to Echo
& Coating only
mode
0.01mm
125013 995
m/s
Pulse to Echo
& Echo to Echo
& Echo to Echo
& Coating only
mode
0.63 508mm
PM/GSA/SAL-002.01.011.001-REV-2
96
Diffe- Alarm
rential Mode
Mode
YES
YES
YES
YES
Scan Data
Mode Output
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
YES
Digital
read out
Digital
read out
YES
Digital
read out
A & BScan
NO
Digital
read out
& B-Scan &
Digital coatings
thickness
YES
Optional Probe
Model
Freq
Mhz
Diam
Mm
Measuring Range
Lower limit
Description
N02
22
20
N05
10
20 x 3.0mm
Normal measurement
N05/90
10
20 x 3.0mm
Normal measurement
N07
15 x 2mm
T5
14
30
Specifications
Features
PM/GSA/SAL-002.01.011.001-REV-2
97
Description
Dakota 15mHz x
Dakota 2.25mHz x
Dakota 5mHz x 3/16
Dakota 5mHz x
Dakota 7.5mHz x 3/16
Dakota 7.5mHz x
Dakota 10mHz x 3/16
Dakota 10mHz x
Dakota 2.25mHz x
Dakota 5mHz x 3/16
Dakota 5mHz x
Dakota 7.5mHz x
Dakota 10mHz x
Dakota 5mHz x
Dakota 5mHz x
Dakota 5mHz x
Dakota 5mHz x
Dakota 10mHz x 3/16
NCT0298
NCT0301
NCT0303
NCT0302
NCT0304
Huatec No2
Huatec No5
Huatec No7
Huatec No5/90
Huatec T5
2mHz 10mm
5mHz 10mm
7mHz 6mm
5mHz 10mm
5mHz 12mm
Consumables
Couplants
Product Code
NCC0021
NCC0079
NCC0111
NCC0162
PM/GSA/SAL-002.01.011.001-REV-2
Description
1 x 5litre (Low Temp)
High Temp (200ml Tube)
0.5 litre (Low Temp)
Wallpaper Paste (Polycell / Alcolin)
98
Product Code
NCT0063
NCT0070
NCT0064
NCT0071
Product Code
NCT0053
NCT0188
NCT0152
NCT0087
NCT0189
NCT0149
Description
SLC 2-10 (2mHz 10mm Dia)
SLC 2-20 (2mHz 20mm Dia)
SLC 4-10 (4mHz 10mm Dia)
SLC 4-20 (4mHz 20mm Dia)
Description
SLM 2-10 (2mHz 10mm Dia)
SLM 2-25 (2mHz 25mm Dia)
SLM 4-10 (4mhz 10mm Dia)
SLM 5-20 (5mHz 20mm Dia)
SLM 5-25 (5mHz 25mm Dia)
SLM 10-10 (10mHz 10mm Dia)
Description
SLF 1-25 (1mHz 25mm Dia)
SLF 2-10 (2mHz 10mm Dia)
SLF 2-20 (2mHz 20mm Dia)
SLF 2-25 (2mHz 25mm Dia)
SLF 4-10 (4mHz 10mm Dia)
SLF 4-15 (4mHz 15mm Dia)
SLF 4-20 (4mHz 20mm Dia)
SLF 4-25 (4mHz 25mm Dia)
SLF 5-10 (5mHz 10mm Dia)
SLF 5-20 (5mHz 20mm Dia)
Description
SLG 2-10 (2mHz 10mm Dia)
SLG 4-10 (4mHz 10mm Dia)
SLG 5-10 (5mHz 10mm Dia)
SLH 2-10 (2mHz 10mm Dia)
SLH 2-15 (2mHz 15mm Dia)
SLH 4-10 (4mHz 10mm Dia)
SLH 5-10 (5mHz 10mm Dia)
SLH 5-25 (5mHz 25mm Dia)
PM/GSA/SAL-002.01.011.001-REV-2
Description
CDF 1-25 (1mHz 25mm Dia)
CDF 2-10 (2mHz 10mm Dia)
CDF 4-20 (4mHz 20mm Dia)
CDF 5-10 (5mHz 10mm Dia)
CDF 5-20 (5mHz 20mm Dia)
CDF 5-25 (5mHz 25mm Dia)
99
Angle Beam
Single Crystal (Miniature)
Product Code
NCT0046
NCT0048
NCT0049
NCT0106
NCT0107
NCT0108
Description
SA 2-45 (2mHz 45 Deg)
SA 2-60 (2mHz 60 Deg)
SA 2-70 (2mHz 70 Deg)
SA 5-45 (5mHz 45 Deg)
SA 5-60 (5mHz 60 Deg)
SA 5-70 (5mHz 70 Deg)
NCT0160
NCT0159
NCT0145
NCT0314
Description
SAO 2-45 (2mHz 45 Deg)
SAO 2-60 (2mHz 60 Deg)
SAO 2-70 (2mHz 70 Deg)
SAO 4-45 (4mHz 45 Deg)
SAO 4-60 (4mHz 60 Deg)
SAO 4-70 (4mHz 70 Deg)
NCT0162
NCT0158
NCT0163
Product Code
NCT0097
NCT0081
NCT0082
NCT0083
NCT0144
NCT0143
NCT0142
Product Code
NCT0126
NCT0127
NCT0066
NCT0085
NCT0157
NCT0156
Description
Description
CDA 2-45 (2mHz 45 Deg)
CDA 2-60 (2mHz 60 Deg)
CDA 2-70 (2mHz 70 Deg)
CDA 5-45 (5MHz 45 Deg)
CDA 5-60 (5mHz 60 Deg)
CDA 5-70 (5mhz 70 Deg)
Product Code
NCT0267
NCT0268
NCT0269
NCT0318
NCT0270
NCT0271
NCT0272
Product Code
NCT0286
NCT0288
NCT0287
NCT0289
Description
SMA 2-45 (2mHz 45 Deg)
SMA 2-60 (2mHz 60 D-eg)
SMA 2-70 (2mHz 70 Deg)
SMA 4-38 (4mHz 38 Deg)
SMA 4-45 (4mHz 45 Deg)
SMA 4-60 (4mHz 60 Deg)
SMA 4-70 (4mHz 70 Deg)
Product Code
NCT0280
NCT0281
NCT0282
NCT0283
NCT0284
NCT0285
Description
MMA 2-45 (2mHz 45deg)
MMA 2-60 (2mHz 60deg)
MMA 2-70 (2mHz 70deg)
MMA 4-45 (4mHz 45deg)
MMA 4-60 (4mHz 60deg)
MMA 4-70 (4mHz 70deg)
Twin Compression
Product Code Description
NCT0295
NCT0296
NCT0299
NCT0300
PM/GSA/SAL-002.01.011.001-REV-2
Description
SHM 2-10 (2mHz 10mm)
SHM 4-10 (4mHz 10mm)
LHM 2-24 (2mHz 24mm)
LHM 4-24 (4mHz 24mm)
100
Description
LMA 2-45 (2mHz 45deg)
LMA 2-60 (2mHz 60deg)
LMA 2-70 (2mHz 70deg)
LMA 4-45 (4mHz 45deg)
LMA 4-60 (4mHz 60deg)
LMA 4-70 (4mHz 70deg)
Phoenix Transducers
Angle Beam
Longitudinal Beam
Single Crystal
Product Code
NCT0225
NCT0226
NCT0227
NCT0262
NCT0263
NCT0264
NCT0265
Description
LSW 2-45 (2mHz 45 Deg)
LSW 2-60 (2mHz 60 Deg)
LSW 2-70 (2mHz 70 Deg)
LSW 4-38 (4mHz 38 Deg)
LSW 4-45 (4mHz 45 Deg)
LSW 4-60 (4mHz 60 Deg)
LSW 4-70 (4mHz 70 Deg)
NCT0170
NCT0196
NCT0197
NCT0198
NCT0205
NCT0206
NCT0207
NCT0172
NCT0173
NCT0174
NCT0175
NCT0171
NCT0192
NCT0193
NCT0194
Twin Crystal
Product Code
NCT0235
NCT0236
NCT0237
NCT0183
NCT0184
NCT0186
Description
TSW 2-45 (2mHz 45 Deg)
TSW 2-60 (2mHz 60 Deg)
TSW 2-70 (2mHz 70 Deg)
TSW 4-45 (4mHz 45 Deg)
TSW 4-60 (4mHz 60 Deg)
TSW 4-70 (4mHz 70 Deg)
Description
SC 1-20 (1mHz 20mm Dia)
SC 2-20 (2mHz 20mm Dia)
SC 2.5-10 (2.5mHz 10mm Dia)
SC 4-10 (4mHz 10mm Dia)
SC 4-20 (4mHz 20mm Dia)
SC 5-10 (5mHz 10mm Dia)
Twin Crystal
Product Code
NCT0323
NCT0181
NCT0182
NCT0208
NCT0209
NCT0322
NCT0223
Description
TC 1-20 C1mHz 20mm Dia)
TC 2.5-10 (2.5mHz 10mmDia)
TC 2.5-20 (2.5mHz 20mm Dia)
TC 4-10 (4mHz 10mm Dia)
TC 4-20 (4mHz 20mm Dia)
TC 5-5 (5mHz 5mm Dia)
TC 5-10 (5mHz 10mm Dia)
PM/GSA/SAL-002.01.011.001-REV-2
Single Crystal
Product Code
NCT0180
NCT0195
NCT0179
NCT0177
NCT0178
NCT0222
101
Item Description
Phoenix
Phoenix
Phoenix
Phoenix
TRANSDU-NCT0205
TRANSDU-NCT0206
TRANSDU-NCT0207
TRANSDU-NCT0225
TRANSDU-NCT0226
TRANSDU-NCT0227
TRANSDU-NCT0263
TRANSDU-NCT0264
TRANSDU-NCT0265
TRANSDU-NCT0337
TRANSDU-NCT0338
TRANSDU-NCT0339
TRANSDU-NCT0399
TRANSDU-NCT0400
TRANSDU-NCT0401
TRANSDU-NCT0402
TRANSDU-NCT0403
TRANSDU-NCT0404
TRANSDU-NCT0515
TRANSDU-NCT0569
Item Description
Phoenix HSSW 4-38 High Temp Single Angle
Phoenix HSSW 4-45 High Temp Single Angle
Phoenix HSSW 4-60 High Temp Single Angle
Phoenix HSSW 4-70 High Temp Single Angle
Phoenix HSSW 2 - 70 Single Angle High Temp
Phoenix HSSW 2 - 60 Single Angle High Temp
Phoenix HSSW 2 - 45 Single Angle High Temp
102
Item Description
Phoenix
Phoenix
Phoenix
Phoenix
Phoenix
SC
SC
SC
SC
SC
4 - 10
4 - 20
2.5 - 10
1 - 20
2 - 20
Single
Single
Single
Single
Single
Compression
Compression
Compression
Compression
Compression
Phoenix SC 5 - 10
Single Compression
Phoenix SC 5 - 20
Single Compression
Phoenix SC5-5 Single Compression (Subvis Connector Only)
Product code
TRANSDU-NCT0181
TRANSDU-NCT0182
TRANSDU-NCT0208
TRANSDU-NCT0209
TRANSDU-NCT0223
TRANSDU-NCT0322
TRANSDU-NCT0323
Phoenix
Phoenix
Phoenix
Phoenix
TC
TC
TC
TC
2.5 - 10
2 - 20
4 - 10
4 - 20
Phoenix TC 5 -10
Phoenix TC 5 - 5
Phoenix TC 1 - 20
Twin
Twin
Twin
Twin
Compression
Compression
Compression
Compression
Twin Compression
Twin Compression
Twin Compression
Item Description
Phoenix
Phoenix
Phoenix
Phoenix
TSW
TSW
TSW
TSW
4
4
4
2
45
60
70
45
Twin Angle
Twin Angle
Twin Angle
Twin Angle
Item Description
Phoenix HTC 5-10 High Temp Twin Comp
Phoenix HTC 4-10 High Temp Twin Comp
Phoenix SSHTC 5/10 High Temp Twin Comp
Phoenix SSHTC 4/20 High Temp Twin Comp
Phoenix SSHTC 4/10 High Temp Twin Comp
Phoenix HTC 2.5-10 High Temp Twin Comp
PM/GSA/SAL-002.01.011.001-REV-2
103
Item Description
Product code
TRANSDU-NCT0350
TRANSDU-NCT0351
TRANSDU-NCT0352
TRANSDU-NCT0353
TRANSDU-NCT0354
TRANSDU-NCT0355
TRANSDU-NCT0356
TRANSDU-NCT0357
TRANSDU-NCT0358
TRANSDU-NCT0359
Phoenix
Phoenix
Phoenix
Phoenix
UT
UT
UT
UT
4MHz
4MHz
4MHz
4MHz
45
45
45
45
Degree
Degree
Degree
Degree
25mm
19mm
17.5 - 18mm
20-21mm
Special Transducers
Product code
TRANSDU-NCT0260
TRANSDU-NCT0261
TRANSDU-NCT0315
TRANSDU-NCT0316
TRANSDU-NCT0342
TRANSDU-NCT0343
TRANSDU-NCT0344
TRANSDU-NCT0345
TRANSDU-NCT0346
TRANSDU-NCT0347
TRANSDU-NCT0348
TRANSDU-NCT0349
TRANSDU-NCT0373
TRANSDU-NCT0374
TRANSDU-NCT0375
TRANSDU-NCT0376
TRANSDU-NCT0377
TRANSDU-NCT0378
TRANSDU-NCT0507
TRANSDU-NCT0559
TRANSDU-NCT0560
PM/GSA/SAL-002.01.011.001-REV-2
Item Description
Phoenix
Phoenix
Phoenix
Phoenix
104
WrapIt
WrapIt is a conformable probe designed for the inspection of radii and curved surfaces. At the
centre is a truly flexible ultrasonic phased array transducer that operates on both concave and
convex surfaces.
Surrounding the array is a two-part rubber enclosure that is set to a nominal curvature. The
rubber housing is adaptable and functionally it confines the flexibility in order to protect the array
from potential damage of being over-flexed. The array can be easily interchanged between
rubber housings to scan different radii. Every housing is suitable for inspecting a range of radii
without any mechanical adjustment required.
Attached to the WrapIt is a wheel encoder positioned to run on the radius so it is clear of panel
cut outs and gaps. The high resolution encoder is waterproof and spring loaded onto the part
giving a stable and reliable operation.
WrapIt incorporates low friction plastic skids to provide stability and a smooth scanning motion.
Within WrapIt, between the array transducer and the component is a flexible rubber delay line.
This is accompanied by couplant irrigation channels that feed water to the front face of the
probe providing consistent continuous coupling of the ultrasound.
Specifications
Features
Conforms to the shape of the component or inspec
tion surface
Simple inspection setup as probe is always normal
to the surface
No adjustment needed when scanning a changing
radius
Cost effective for multiple geometries as a single
transducer can be used in several housings
Compatible with standard phased array instruments
PM/GSA/SAL-002.01.011.001-REV-2
105
Flex Transducers
Flex transducers are thin, compliant ultrasonic probes that can conform to curved surfaces using
fingertip pressure. This enables them to be used on non-flat components to provide improved ultrasound transmission compared to standard hard faced transducers. Made of a thin but durable
piezo-electric material that is soft enough to bend, Flex transducers can be shaped to suit curved
geometry. By using a soft backing layer, the flexibility of the crystal is retained. The Flex series are
available as single element (FFSC), dual element (FFTC), composite single element (CFFSC), and
composite dual element (CFFTC) formats. Standard Flex transducers are 5MHz or 10MHz at sizes
of 6mm, 10mm or 20mm diameter. Flex transducers are ideal for inspecting radius areas of
composites and accessing complex geometries in metals, such as weld cap areas or castings. They
can be used with any standard ultrasonic instrument.
Benefits
Features
Manufactured from flexible piezoelectric material
Bandwidth:
>70%
Available in single element and dual element
formats
Frequencies:
from 1MHz 10MHz
Diameters:
from 3mm 20mm
Height:
3mm (approximately)
Microdot connection
PM/GSA/SAL-002.01.011.001-REV-2
106
Description
Dakota Mini-Max Bolt Tension Gauge
Features
Specifications
Specifications
Features
PM/GSA/SAL-002.01.011.001-REV-2
107
Features
User friendly setup panel and UT board control
interface
Data is acquisition software records A, B and
C scans and take up to 719 readings per revolution
Full colour data viewer software illustrates B and
C scans
Inspects tubes up to 30 meters (99 feet) in length
with diameters from 0.350 inch (8.9mm) to
3.5 inches (88.9mm)
Includes submersible, stainless steel pump with filter,
and water flow adjusts up to 10 gallons per minute
(GPM)
PM/GSA/SAL-002.01.011.001-REV-2
108
Features
Benefits
Holds up to 6 probes
Simultaneous PA + TOFD inspection
Probes independently sprung and
gimballed
Probes can be positioned to any PCS
Operates in any orientation
Pipe diameters from 4O/D to flat
Integrated couplant and probe manifold
Scanning arm adjustable up to 250mm (10)
Servo constant speed control
Laser or chain guide option
IP66 rated
ASME code compliant
Local motion control using MCPA 2-2 or
via PC Link software package
PC Link allows choice of scan patterns,
movement parameters, acceleration and
speeds
Can accommodate any manufacturers
probes or wedges
Mounting rails for ancillary equipment e.g.
TOFD pre-amp
PM/GSA/SAL-002.01.011.001-REV-2
109
MagMan
Circumferential and Longitudinal Weld Scanner
MagMan allows for inspections of both circumferential and longitudinal pipe welds with a simple
adjustment. It is ideal for inspections using phased array, TOFD and pulse-echo separately or
combined.This versatile magnetic scanner was designed specifically for manual operation.
Compact yet robust, the MagMan can carry from one to 12 ultrasonic probes and is capable not
only of scanning flat plate welds, but can also be used for the inspection of pipes down to 1.5" OD
(circumferential) and 9" OD (longitudinal).The MagMan is designed to work with any flaw detection
system and can be supplied with a guide chain and laser guide for accurate positioning.
The MagMan can be used with any manufacturers probes and wedges.
Benefits
Features
Holds up to a maximum of 12 probes
Probes independently sprung and gimballed
Independent suspension on all 4 magnetic
wheels for uneven surfaces
Compact (350mm x 325mm) and lightweight
aluminium frame (3kg)
Accurate tracking via guide chain and laser
guide
Operates in any orientation and from 1.5 OD
through to flat plate
Waterproof, spring-loaded wheel encoder
Frame incorporates two measurement
rules for accurate probe separation
PM/GSA/SAL-002.01.011.001-REV-2
110
MagScan
Dual Axis Motorised Scanner
MagScan is a compact magnetic dual axis motorised scanner and the ideal tool for corrosion
mapping. It can be used on flat plate and pipes as small as 4" O/D. MagScan can hold up to six
ultrasonic probes and is also suitable for phased array and TOFD inspections. MagScan is the ideal
tool for corrosion mapping. The dual axis function allows for inspections such as raster scanning and
for testing pipe to elbow welds, and any flat or curved surfaces. MagScan is fully encoded and offers
a range of stroke lengths. Local motion control for the MagScan is via PC Link software package.
PC Link allows a choice of scan patterns, movement parameters, acceleration and speed settings.
Other options available for the MagScan include the use of a chain guide and peristalitic pump.
Features
111
MultiMag
Compact Magnetic Wheeled Manual Scanner
MultiMag can be used on pipes ranging from 3" OD up to flat plate and can be configured
for inspecting pipe to pipe or pipe to elbow circumferential welds, as well as single sided
inspections of pipe to fitting welds. With large magnetic wheels that provide a stable
platform the MultiMag has a smooth rolling motion. The frame includes angular adjustment
to enable the scanner to be used on small diameter pipes. The wheels can be positioned
anywhere along the scanning frame to give the flexibility to configure the scanner to suit the
inspection geometry. MultiMag can hold up to four transducers; phased array, TOFD or
pulseecho, arranged as two pairs on either side of the weld. The transducers are mounted
to spring-loaded tool-posts that push the transducers onto the test surface with a constant
force providing a stable positioning system. The transducers can easily be re-positioned,
relative to the weld, and fixed in place with a thumb screw. The tool-posts incorporate gimbals in two directions to ensure the transducers stay in contact and accommodate surface
variations. Low-profile tool-posts are also available when surface clearance is restricted.
Compatible with any multi-channel flaw detection system, MultiMag includes a spring-loaded
wheel encoder that is wired to suit any manufacturers instrumentation. Optional accessories
include a guide chain to maintain scanner alignment and direction or a laser guide to track a
weld line by eye.
Features
Operates in any orientation from 3"
OD up to flat plate
Pivoting arms to optimize probe
contact
Can support up to 4 probes
Wheel brackets tilt to assist with
misaligned welds
Tool-posts are independently sprung
and gimballed
Quick release handles allow easy
movement of wheels, tool-post and
encoder positions
Angular adjustable frame for use on
small diameter pipes
Robust modular construction for
practicality on site
Large PCS version available
For use with any manufacturers
instrumentation
PM/GSA/SAL-002.01.011.001-REV-2
112
Swipe
Manual X-Y Scanner
Swipe from Phoenix ISL is a two axis manually operated X-Y scanner. It enables quick C-Scan
inspection of flat or curved components with unlimited travel in one direction. It is suitable
for inspection with ultrasonic phased array, conventional pulse-echo or eddy current techniques.
The Swipe scanner is fully encoded on both axes and can be configured to operate with any probe
and wedge combination. The innovative design allows the swipe arm to be changed to suit
the coverage needed from 400mm up to 800mm. The wheels allow unlimited scanning in the rolling
direction. The scanner incorporates a quick-release brake to ensure stability whilst performing a
scan. Also included is a three button junction box that can be configured to start, pause and save
scans providing the user with more control without the need to leave the scanner.
Features
Interchangeable swipe arms available from 400mm up to
800mm
Dual axis encoding
Unlimited scan length (rolling axis)
Quick release brake locks rolling axis to maintain position
during swipe scan
Three button junction box to start, pause and save scans
Quick release handles
For use on ferritic and non-ferritic material
PM/GSA/SAL-002.01.011.001-REV-2
113
TOFD Caliper
Compact single axis scanner
This pocket-sized, manually-operated scanner allows for quick and easy TOFD inspection of
welds of any material. The TOFD Caliper is ideal for inspecting small or difficult to access areas
and can be used for welds of any orientation on 3" pipes up to flat plate. A compact, lightweight,
user friendly scanner, the TOFD Caliper is the perfect tool to provide a quick and simple, manual
weld inspection. It is very easy to set up with the probe separation being adjusted from a single
thumb screw. The TOFD Caliper operates in any orientation and is suitable for inspecting welds on
pipework, pressure vessels, storage tanks and structural components. The TOFD Caliper holds a
single pair of transducers with the wedges very easily clipped into the arms. Interchanging a wedge
takes seconds. It is compatible with the full range of wedges and TOFD transducers. Wedges can
be plastic, brass, or stainless steel and are available at 45, 60 and 70 as standard. The TOFD
Caliper can operate with any encoded TOFD instrument. It includes a wheel encoder wired to suit
any manufacturers instrumentation. The TOFD Caliper is often used as the most suitable training
tool for TOFD inspectors due to its simplicity, reliability and quick wedge interchange.
Features
Waterproof wheel encoder
Fully adjustable probe centre separation
(PCS) from 28mm to 160mm
Quick release tandem probe attachment
via gimballed holders
Operates in any orientation and on
surface from flat down to 75mm O/D
Plug in and go design
Accurate tracking by virtue of easy
steer motion
For use with any manufacturers
instrumentation
PM/GSA/SAL-002.01.011.001-REV-2
Benefits
Cost effective
Ideal for position related A, B, D and echo dynamic
scan data collection
Fully adjustable probe centre separation (PCS) from
28mm to 160mm
Fast inspection
Permanent record when used with suitable flaw
detector
Durable construction
Quick release tandem probe attachment via gimballed
holders
Compatible with full range of wedges and transducers,
including Piezo-composite
Applicable to pipework, pressure vessels storage tanks
and structural components
The system can operate with any multi-channel flaw
detection system
114
MapMan - OH
Manual Corrosion Mapping Scanner
The MapMan - OH scanner is a two axis manual X-Y scanner designed for use with the Olympus
HydroFORM probe. MapMan is fully encoded on both axes and has the ability to inspect pipes from 4
OD through to flat on any material.The unique free moving arm allows for inspection up to a maximum
stroke of 550mm. MapMan has sets of magnetic wheels which give the scanner rigidity and stability
when performing an inspection. This enables data to be collected in a simple, fast and cost efficient
manner by eliminating the need to re-scan areas.The scanner design incorporates an overlap feature
that can guarantee 100% coverage of the component. An additional feature of the scanner allows the
operator to use the MapMan on non-ferritic material simply by removing the magnetic wheels and
replacing with a belt at either end of the arm, available from 4" OD up to 48" OD. The MapMan is part
of a family of Phoenix manual and automated scanners and is designed to operate with any
multi-channel flaw detection system.
Features
PM/GSA/SAL-002.01.011.001-REV-2
115
Features
Benefits
Holds up to 4 probes
Probes independently sprung and gimballed
Accurate tracking
Operates in any orientation on flat plate through
to 3O/D pipe
Positional encoder output
By changing the wheels it becomes track
mounted for non-magnetic surfaces
Can be supplied with TOFD, Phased Array and
Pulse Echo probes and wedges inclusive of
gimballing and couplant feeds
PM/GSA/SAL-002.01.011.001-REV-2
116
Features
Interchangeable swipe arms available from
400 mm up to 800 mm
Dual axis encoding
Unlimited scan length (rolling axis)
Quick release brake locks rolling axis to
maintain position during swipe scan
Three button junction box to start, pause and
save scans
Quick release handles
For use on ferritic and non-ferritic material
Weight: max 5 kg depending on configuration
Encoder resolution:
X = 10 steps/mm
Y = 1000 steps/mm
Encoder connection: Any
PM/GSA/SAL-002.01.011.001-REV-2
Benefits
User-friendly scanner, allows for quick, effective
setups
Operates on any material (magnetic wheels
available)
Operates in any orientation
Can be used with any manufacturers probes,
wedges and instrumentation
Typical SWIPE Scanner Kit includes:
SWIPE scanner frame and 400 mm arm
1 x brake handle
1 x cable management and three button
junction box
1 x 4mm PA toolpost to hold PA / PulseEcho wedge
2 x encoders with 5m cable
Irrigation tubing and accessories
Protective carry case
117
Features
Pipe diameters ranging from 0.5to 4NPS
Has a clearance envelope of 13mm
Option of either single or dual probe inspection
techniques
Rubber wheels provide smooth
circumferential movement around the pipe
Probes and wedges are easily interchangeable
Miniature splash-proof encoder provides
38 quad counts/mm
Compatible with various phased array
probes and flaw detectors from leading suppliers
PM/GSA/SAL-002.01.011.001-REV-2
118
Bracelet
Small Bore Weld Scanner
The Bracelet scanner is a low profile, small bore pipe scanner for use with ultrasonic phased
array or TOFD probes. It can be configured to inspect pipes ranging from 0.5 to 8 nominal pipe
size (NPS).The innovative design allows for speedy set ups between this range. The scanner is
compatible with a range of industry standard small phased array probes and instruments. The
Bracelet can hold either one probe for singlesided inspection or be linked with a second
probe for dual-sided inspections. The scanner comprises a series of links to make a flexible
chain which wraps around the pipe and a strap secures the Bracelet to the pipe once the axial
position is established. The ultrasonic probe and profiled wedge are fixed to one end of the
Bracelet in an adjustable clasp. To scan, the Bracelet is rotated 360 around the pipe with the
rubber tyres providing excellent axial grip to prevent any unwanted slippage. The miniature
encoder unit is attached to the opposing end of the Bracelet with the encoder wheel running
around the pipe surface collecting data from the circumferential axis.
Specifications
Features
PM/GSA/SAL-002.01.011.001-REV-2
119
WREN
Weld Root Erosion Scanner
This hand held, single axis scanner is ideal for TOFD inspection of welds of any material. The WREN
can be operated using one hand so is particularly operator-friendly for site use, especially in areas
with difficult access. It has a compact frame for accurately positioning transducers for TOFD inspection of welds available in two lengths: the WREN 4 is 100mm and the WREN 8 is 200mm. The scanner provides a sturdy, accurate frame giving high quality, reliable inspection data. The WREN operates in any orientation on surfaces from 2" pipe up to flat plate, suitable for inspecting welds on pipework, pressure vessels, storage tanks and structural components. The WREN holds a single pair of
transducers with the wedges attached to the scanner using spring-loaded gimballing pins.
The attachment of the wedges allows some compliance between the two TOFD transducers
permitting inspection on mismatched or irregular welds. The WREN is compatible with the full range
of wedges and TOFD transducers. Wedges can be plastic, brass, or stainless steel and are available
at 45, 60 and 70 as standard. Minimal contact area wedges are also available for inspection in
difficult to access areas and for minimising the transducer separation for specific inspections. The
WREN can operate with any encoded TOFD instrument. It includes a wheel encoder wired to suit any
manufacturers instrumentation.
Features
TOFD scanner for weld root erosion or
general TOFD inspection
100mm or 200mm long TOFD scanning
frame
Can be operated using one hand
Ideal for site use in areas with minimum
access
Waterproof wheel encoder
PM/GSA/SAL-002.01.011.001-REV-2
120
Description
A2 (V1) 25mm Steel
A2 (V1) 25mm Stainless Steel
A4 (V2) 12.5mm Steel+
A4 (V2) 12.5mm Stainless Steel
A4 (V2) 20mm Steel
A4 (V2) 20mm Stainless Steel
A5 -- 50 x 75 x 305mm Beam Calibration
A6 - 25 x 50 x 150mm
A7 - 74 Radius x 75mm
Steel Step wedge - 10 Steps (1-10mm)
Stainless Steel Step wedge - 10 Steps (1-10mm)
Steel Steo wedge - 10 Steps (2-20mm)
Stainless Steel Step wedge - 10 Steps (2-20mm)
ASME (19mm) Basic
IOW DAC Block - 50mm (1.5mm Hole)
AWS Resolution Calibration (RC)
Microdot / Lemo 00
PM/GSA/SAL-002.01.011.001-REV-2
121
6.1 EQUIPMENT
Product code
NCT0023
Description
POLDI Impact Hardness Tester
HBC Poldi type Impact Hardness Tester complete with 2 x Test Bars
and JC10 Microscope
Additional test bars and material hardness available.
NCT0213
NCT0248
PM/GSA/SAL-002.01.011.001-REV-2
122
Description
Hardness Test Calibration Block (Leeb value)
NCP0074
NCP0072
NCB0019
NCB0021
NCB0001
NCB0002
NCB0039
NCC0168
PM/GSA/SAL-002.01.011.001-REV-2
123
Description
Gatronic Holiday Detector
Specification:
Test voltages: 5, 10, 15, 20, 25 kV standard,
variations on request
Pulse frequency: 30 Hz nominal
Power supply: 12 V 3.8AH. Lead Acid Battery
for 12 hours continuous operation
Dimensions: 260 x 230 x 90mm
Weight: 3.0kg (Instrument) 0.9kg (Probe handle)
Composition:
Standard package comprises of:
Base instrument
Probe handel and 1500mm lead
300mm Brush probe
10m Earth lead
Battery
Product Code
NCD0004
Description
Gatronic Pinhole Detector
Specification:
Output voltage: Variable 0 100VDC 5%
Sensitivity: 150,000 ohms/volt
Power supply: 12V 3.6 AH. Lead Acid
Battery for 12 hours continuous operation
Dimensions: 260 x 230 x 90mm
Weight: 3.0kg (Instrument)
Composition:
Standard package comprises of:
Base instrument
Probe handle and 1500mm lead
10m Earth lead
Charger unit and Earphones
PM/GSA/SAL-002.01.011.001-REV-2
124
Description
Huatec Coating Thickness Gauge TG8825FN
Product Code
NCG0056
Description
Huatec Coating Thickness Gauge TG8826FN
PM/GSA/SAL-002.01.011.001-REV-2
125
Product Code
NCG0002
Description
Elcometer Model 456
For precise measurement of coatings, the new Elcometer 456 heralds radical new advances in
both design and performance. Ergonomic styling for the ultimate in hand-held comfort. Full, menu
driven, graphics display for ease of use. Greater than 60 readings per minute for fast results.
Enhanced memory capability for data storage. Unrivalled accuracy and repeatability for the
ultimate hand-held performance. Integral and plug-in probe options for total versatility plus a choice
of three models and a host of other carefully developed benefits that really do place the future of
coating thickness measurement in the palm of your hand.
Probe Specifications:
Ferrous (F)
Non-Ferrous (N
Dual (FNF)
Gammatec carries the full range of Elcometer inspection and measurement instruments.
Adhesion:
Mechanical Adhesion Testers
Hydraulic Adhesion Testers
Cross Hatch Cutters
Cross Hatch Templates
Universal Paint Inspection Gauges
Climate Monitoring:
Digital Thermometers
Hygrometers
Magnetic Thermometers
Dew-point Calculators
Dew Meters
Inspection Mirrors
Gloss:
Novo Gloss Gloss Meters
Micro-Gloss Gloss Meters
Novo Curve Gloss Meters
Abrasion:
Taber Abrasers
Taber Shear / Scratch Testers
Product Code
NCK0018
Inspectors Accessories:
Publications
Safety Torches
Description
Elcometer Coating Inspection Kit
Site inspection requires a range of portable testing equipment. In order to make these products easily
available and transportable, Elcometer have developed a range of Coating Inspection Kits.
All gauges are conveniently stored in a hard plastic protective carrying case and are supplied with
full operating instructions.
PM/GSA/SAL-002.01.011.001-REV-2
126
Specifications
Features
PM/GSA/SAL-002.01.011.001-REV-2
127
ACCESSORIES
Magnifiers
Product code
NCM0005
Description
Illuminated M80
Mirrors
Product Code
NCM0006
NCM0015
NCM0016
NCT0115
Description
Industrial Fibrescopes
Product Code
NCM0047
NCM0048
Description
Scope Mirror for use with MIGS
Scope Magnet for use with MIGS
V-WAC Gauge
Fillet Weld
WTPS Gauge
Bridge Cam
Single Purpose
6" Starrett Scale
Telescoping Mirror
Micrometer w/ Ball
Hi-Lo Gauge
Skew-T Fillet Weld w/ Calc
AWS Type Gauge
ADJ Fillet Weld
Magnifier
A full range of welding and visual inspection aids available on request from Gammatec
PM/GSA/SAL-002.01.011.001-REV-2
128
Description
Major Tech Digital Thermometer
Elcometer Mod 113 Surface Temperature Magnetic
Consumables
Tempsticks
Product Code
NCC0070
Description
Temp Stick Temperature Indicator
Description
Flat Vacuum Box
Inside Corner Vacuum Box
Outside Corner Vacuum Box
The Gammatec range of Vacuum Boxes is rugged yet lightweight and designed to meet
your needs for Flat and Lap joints as well as Inside and Outside corner joints.
Our shockproof Vacuum Boxes are built from lightweight Acrylic which can be fabricated
for special applications. The tough rubber gasket is designed to provide a maximum seal.
The Boxes are supplied standard with a quality, calibrated, Stainless Steel Gauge as well
as quality valves and vacuum generators.
Standard box sizes are:
Flat and Lap Joint Boxes
L750 x W250mm
Corner Boxes
L450 x W100mm
Other box sizes manufactured on request
PM/GSA/SAL-002.01.011.001-REV-2
129
PM/GSA/SAL-002.01.011.001-REV-2
130
The GammaTec NDT Supplies SOC Ltd policy statement on Code of Ethics is signed by the
Chairman of the Board and the Managing Director.
As we carry out GammaTecs mandate, it is conceivable that the Board members, executive
management, all other levels of management, staff and contractors, will from time to time come
across situations in which their integrity, honesty and accountability may be put to the test.
A frame of reference, based on agreed organisational values is therefore required to describe
our standards and ethical behaviour when dealing with our stakeholders.
The King Report refers to a companys code of ethics as the principles, norms and standards it
promotes for the guidance and conduct of its activities, internal relations and interactions with
external stakeholders. In this regard, companies are expected to instil a culture of conduct
based on generally accepted standards of behaviour.
This Code of Ethics, which is applicable to the above-mentioned groups, should be used as a
frame of reference to shape our behaviour and thus ensure that we behave consistently in
accordance with agreed behavioural standards.
In an endeavour to address unacceptable behaviour, particularly fraud and corruption in an
objective and transparent manner, and to protect those who may wish to bring this to
managements attention, we have enlisted the services of a firm of independent experts to
manage our (Necsa) hotline service. Individuals are free to contact the GammaTec Toll free
hotline number 0800 212 367.
Pieter Louw
Chairman: GammaTec NDT Supplies SOC Ltd Board of Directors
Ralph Davies
Managing Director: GammaTec NDT Supplies SOC Ltd
PM/GSA/SAL-002.01.011.001-REV-2
131
ii)
iii)
iv)
v)
vi)
vi)
Reporting
Reporting of fraud can be done to the following hot-line:
Tel:
0800 20 45 96
Fax: 0800 200 796
Email: Fraud@kpmg.co.za
Post: KPMG Hotpost, BNT371, P.O. Box 14671, Sinoville, 0129
Reaction and Investigating
GammaTec NDT Supplies SOC Ltd will maintain a policy of zero tolerance towards fraud and,
without exception, react quickly to all suspected incidents of fraud. Well established and
streamlined investigation procedures must be followed to minimize exposure to losses and
these should be consistent at all levels of employment in the organization.
PM/GSA/SAL-002.01.011.001-REV-2
132
It is the policy of GammaTec NDT Supplies SOC Ltd to establish and maintain a safe
working environment in compliance with the Occupational Health and Safety Act, (85
of 1993) as Amendment Act No. 181 of 1993, using hazard identification and risk
management strategies, so as to prevent personal injury, ill health or property damage
and to safeguard the environment.
The Occupational Health, Safety and Environmental policy is thus directed towards
achieving the following objectives:
Ensure that appropriate safety instructions, advice and guidance are given to
contractors and visitors to the premises.
We should all strive to maintain a safe and healthy workplace. Every employee is
responsible for carrying out his work in a safe and healthy manager for himself and for
his fellow workers.
Copies of this policy shall be made available to all employees and displayed at all main
locations.
It shall be brought to the attention of all employees, contractors and visitors and be
made available to any other interested party.
PM/GSA/SAL-002.01.011.001-REV-2
133
FIND US ON
Oserix S.A
Latitude: 5025'32.90"N
Longitude: 413'25.65"E
Lectromax Australia
Latitude: 3743'17.75"S
Longitude: 145 8'17.82"E
PM/GSA/SAL-002.01.011.001-REV-2
EARTH
Gammatec NDT Supplies
SOC Ltd
Latitude: 263920.17S
Longitude: 275655.50E
Gammatec Nigeria
Latitude: 45046.50N
Longitude: 7312.77E
Gammatec Aseana
Latitude: 3224N
Longitude: 1013555E
PM/GSA/SAL-002.01.011.001-REV-2