Académique Documents
Professionnel Documents
Culture Documents
Source Dom0
Target Dom0
Shows Total vcpus of all running VMs ,Shows Total Memory of all running VMs
Checking the vm.cfg for vcpu_max parameter
Check if vms are on localdisk
Identify the container to snap
EM agent status ,Ovs-agent status
Ldap status
Ifconfig,bond,MTU,route details
c). Ensure you are able to access the ilom console of the Dom0
d). Ensure that /etc/ovms-provision.conf exists. If it does not, perform the following step:
cat > /etc/ovms-provision.conf << EOF
DATACENTER=<Valid values found in Appendix 7.1 of OMCS_Hypervisor_Provisioning.pdf>
ZONE=<Dom0s Network ZONE>
PROVISIONING_TICKET=<SR/RFC Number>
EOF
vi /etc/ovms-provision.conf
e) Replace the values assigned to DATACENTER, ZONE, and PROVISIONING_TICKET with the relevant
information for the patching ticket at hand.
Search for SR based on <sub> check the SR is closed and included the VLANs in use on the
current Dom0 ( based on output captured in the above prep script.
***Proceed to live migrate ,if your answer is yes for the below conditions ****
<<<<<<<<
-s
3.If the upgrade has gone correctly and all verifications passed, then remove uptrack RPMs
yum erase -y uptrack-libyaml uptrack-python-pycurl uptrack-PyYAML uptrack
cont
SR final Update Template/Release note
The scheduled maintenance activity has been completed successfully.
should you encounter any issue, Please contact:
SA1 Contact:
-----------Name : Devesh Kumar
Mobile : +91 9611523300
Email ID : devesh.d.kumar@oracle.com
Management Escalation :
--------------------Name : karuppiah rama
Email ID : karuppiah.rama@oracle.com
Mobile : +91 98456 33725
Name : Hari Yalavarthy
Email ID : hari.yalavarthy@oracle.com
Mobile : +91 9845902356
Regards,
******END******
Doc
: Dom0 Upgrade PREP Process
Version
: 1.4
-------------------------------------------------------------------------------------------------------------------------
Target Dom0
SR#
-Takes the Total Memory and VCPU used/assigned to the VMS on Source Dom0
-Identify the bridges of the VMs running on the Source Dom0
- Identify the Storage Container and swap container on the Source dom0
This will compare:Same Storage and swap container is Available on Target dom0
Same bridges of source Dom0 Vms are available on the Target Dom0
Show if enough free memory is available for VM migration
VLAN Tagging:1.Check in portal for vlan tagging SR and confirm the required vlan
Confirm it is completed.
update the vlan tagging page
2.if vlan tagging is not there, then identify all the VM's in a given server pool
and get the vlan details of each VM and raise network vlan tagging SR
steps
ssh -l admin localhost -p 10000
OVM> show serverPool name=rmc002oodpool001
OVM> show serverPool name=rmc002oodpool001
update the vlan tagging page
3.IF we find more than Two Bridges for a VM check it has rac interface
In that case we need to take ./getnet for rac also and get it tagged
Run for :
-rac
-vip
-Frontend
Login : hqsun1 - take the vlan id details of the VMs
EX:
bash-2.03$ /home/vvarughe/getnet vmohsadvg501
Request:
vmohsadvg501
FQDN:
vmohsadvg501.oracleoutsourcing.com
IP:
148.87.205.163
Netmask:
255.255.255.240
vlan id:
vlan note:
rmdc-z2-advg-v160
NAIR-DB-Advantage-Sales-and-Marketing-(sr3-5756856194)
Network:
148.87.205.160/28
First IP:
148.87.205.161
Last IP:
148.87.205.174
Broadcast IP: 148.87.205.175