Académique Documents
Professionnel Documents
Culture Documents
Introduction
The UTScan-100 is an all-in-one, full-featured PC based industrial ultrasonic instrument for in factory usage.
Employing 32-bit PCI architecture, instrument operation is made fast and easy via windows based inspection
screens and intuitive dialogue boxes for ultrasonic setup.
Configurable with either single or multi-channel front-end square wave pulser/receivers, the UTScan-100 is
expandable up to 32 independent ultrasonic channels and programmable I/O ports.
The UTScan-100 delivers: 95dB true instrument gain, 50dB DAC, 35MHz analog bandwidth and ample
storage for virtually an unlimited number of setup files for different transducers and inspection plans.
Product applications
Flaw detection in metals, composites andplastic materials,
Wall and clad thickness measurements
A and B-scan evaluation
Typical applications include:
Forgings Billets
Plates Rolls Pipes Automotive
Train rail and wheel
Main features
Software for instrument UTScan-100 set-up and display, application control, flaw evaluation, measurement
and documentation, with the full multi-tasking capability of Windows. All instrument functions directly
accessible from the Toolbox with easy-to-learn, easy-to-use application tailored operator interfaces.
Multi channel
setup display
gain
TCG Time corrected gain for the first flat bottom hole of the near surface entrance
All instrument hardware uses gate peak detection circuitry to ensure reliable and repeatable gate data
acquisition.
Gates dialog and A-scan
gates display
Gates threshold
Gates data
Bscan display
The display functions are used to change the appearance of the A-scan display
and displaying advanced measurement tools
UTSCAN-100 T E C H N I C A L S P E C I F I C A T I O N S
Overall Analog Performance
Analog bandwidth,
1 to 35MHz (-3dB)
receiver
Calibrated gain
96.2dB
Full screen sensitivity 32V peak to peak
Equivalent input
noise
Linearity
Channels
Number of channels
Channel triggering
Mode
Pulse fall time
Pulse width
Resolution
Isolation (PE/TT)
Burst
Hardware Gates
Number
Modes
1dB
Range 2) 3)
1 to 32
Internal or external
0.5dB
PE, TT, Fire Twice,
Fire Next
<6nsec (RPP3 HR)
10-500nsec (HR)
1nsec
> 60dB @ 5MHz
1,2,3,4
Preamplifier Characteristics
Programmable gain
0, 15, 30, 45dB
Output voltage
2.0Vp-p
Frequency Filters
Number and type of
filters
100nsec to 10msec
0nsec to 10msec
10nsec
4nV/Hz
Time Base
Range 2) 3)
7 band pass
Resolution 3)
Peak detection
Alarm threshold
Dynamic gate
DAC (TCG)
Dynamic range
Amplitude resolution
Number of steps
Step width 3)
Pkosition resolution 3)
Slew rate
Interpolation
Last gate attenuator
Up to 32 / ch
Master or slave
10nsec to 10msec
10nsec
Positive, negative or
absolute
Positive, negative or
absolute
Backwall echo
tracking in last gate
51.2dB
0.2dB
1 to 256
160nsec
Optional
General
Power requirements
Operating
temperature range
5 to 40C RPP3,4 4)
5 to 35C - usc-100
Humidity
80% noncondensing
440mm x 180mm x
460mm - W:H:D
10Kg (22Lbs)
Dimensions
Weight, single
channel version
1)
1 - 6 ch. in Fire Twice mode. 2) With standard 24K buffer. Maximum range and delay doubled with 48K buffer.
frequency. 4) Mounted externally.
3)
At 100MSamp/sec sampling
Modifications reserved