Académique Documents
Professionnel Documents
Culture Documents
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
asd
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
asd
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
asd
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
asd
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
13.
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
vvvvv
1.
2.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
3.
4.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
5.
6.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
7.
8.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
9.
10.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
11.
12.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
14.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
15.
16.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
17.
18.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
19.
20.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
21.
22.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
23.
24.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password
then use this to execute your file
start drive_name:\ForOBE\BISAMPLE_USER.sql
3. Import .rpd file to BISAMPLE schema.
You can do this from command prompt, for this go to start -> run -> cmd
25.
26.
In order to do this go to Start -> Run -> cmd and then write sqlplus /nolog
conn system/password