Académique Documents
Professionnel Documents
Culture Documents
1.
2.
3.
4.
26.
What are the different types of OLTC connection
arrangements? What the present OLTC arrangement
adopted? What is the type of MDU?
27.
How many tapping are there in present OLTC? What are
the % range of tapings? What is the nominal tap voltage?
28.
What are the routine tests and type tests in the
transformer?
29.
What are the special and type tests are there in
transformer?
30.
What is the tolerance for PI value?
31.
What is 2 KV test?
32.
What is the tolerance for Voltage Ratio?
33.
What is the pattern of magnetizing current?
34.
What is vector group of IDT? How to confirm it by VG
test?
35.
What is the tolerance of % of Short Circuit Impedance
(SCI) value?
36.
What is the precaution to be checked for SCI test?
Especially Earthing Transformer?
37.
What is the tolerance of winding and bushing tan delta
value?
38.
What is the tolerance of WTI CT ratio?
39.
What is the tolerance of winding resistance test values?
40.
What are the combinations of SFRA test.
41.
What are the permissible pressures at top and bottom
of the transformer during the pressure test?
42.
What are the tests on cooling fan?
43.
What are the tests on
44.
What are the tests on OLTC?
45.
What are the conditions for fire deluge test?
46.
What is RTCC, AVR?
47.
What are Master / Follower / Independent in AVR?
48.
What are Manual and Auto modes in AVR?
49.
What is the Parallel Auto and Parallel Manual modes in
AVR
50.
What are the tests on Panel Heater and Hygrostats?
51.
What is the DGA? And what are the key gases?
52.
What is the Full Chemical Analysis test?
53.
What are the minimum parameters to be confirmed for
the oil before every filling into the transformer?
54.
What is the medium of HV and LV cable boxes?
55.
What are the requirement of HV cable box inspection
before and after the HV test and LV cable box inspection?
56. What are the requirements of small wiring checks?
57. How to deacrese the surface leakage of the bushing , and
which has higher surface polymers or ceramic bushing ?
58.