Académique Documents
Professionnel Documents
Culture Documents
Shenzhen Office:
Tel: 86-755-82211737
Fax: 86-755-82211771
Hong Kong Office:
Tel: 852-23978218
Fax: 852-23978187
Version1. 02
-1-
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
Notice:
The 5-function TX2C ATS302T/RX2C ATS302R heritages the sophisticated
architecture and design methodology from TX2/RX2 of Realtek Semiconductor
who is one of the leaders of remote controller technology design of toy product.
This pair of TX2C ATS302T/RX2C ATS302R are the best Transmitter/ Receiver
choice of remote control car and fully covers TX2RX2 features with superior
performance. RX2C ATS302R is the first receiver controller worldwide with internal
and selectable DC-DC converter and shift-speed module. The TX2C ATS302T/RX2C
ATS302R are with more functions and excellent quality, its stability and affectivity
promoted to a higher level applications. Actions keeps on leading the designing
technique of remote controller of toy product.
Copyright pending # 03500035X to National Intellectual Property and Patent
Administration Bureau.
Remark: Realtek Semiconductor is the trademark of Taiwan Realtek Semiconductor
Version1. 02
-2-
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
Features
Wide and Low operating voltage range:
1.5V to 5.0V(TX2C ATS302T and RX2C ATS302R No using DC-DC)
1.0V to 3.0V(RX2C ATS302R Using DC-DC)
5-function remote controller controlling forward/ backward/ turbo/ right/ left
Provide two transmissive interface (RF and IR) for different application
Selectable Forward Output Signal Format through MOD pin
Few external components needed and Oscillator with an external resistor and a
capacitance.
Low Standby current and low operating current.
Typical oscillator frequency:
RF: 128KHz
IR: 114KHz(Carrier Frequency: 57KHz)
IR: 76KHz(Carrier Frequency: 38KHz)
Auto Power-OFF function for TX2C ATS302T
Internal, Selectable DC-DC converter which need few external components
Provide two high effective amplifiers and enhancive signal input (SI) recognition
circuit for very weak signal for increasing remote control distance.
RX2C ATS302R has very strong Driving ability about five function-output
Version1. 02
-3-
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
NC
GND
BACKWARDB
FORWARDB
TURBOB
6
7
SC
OSCI
13
NC
12
OSCI
11
OSCO
10
PC
VDD
SO
Timing
Generator
Oscillator
OSCO
LEFTB
14
TX2C ATS302T
RIGHTB
Block Diagram
TURBOB
LEFTB
RIGHTB
FORWARDB
BACKWARDB
Encoding
Circuit
Latch
Circuit
Logic
PC
SO
SC
Receiver
Pin Assignment
RX2C ATS302R
OSCI
OSCO
16
VI2
15
VO1
SI
14
VI1
OSCI
OSCO
RIGHT
LEFT
LX
RX2C ATS302R
VO2
GND
13
VDD
12
TURBO
11
FORWARD
10
BACKWARD
SI
VI1
VO1
VI2
VO2
LX
MOD
DC-DC
Counter
PLA
Latch
LEFT
RIGHT
TURBO
FORWARD
BACKWARD
Comments*
Version1. 02
Decoding
Circuit
AMP
MOD
Timing
Generator
Oscillator
-4-
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
Electrical Characteristics
TX2C ATS302T
Typical operating Conditions : VDD = 3.0V, Fosc =128KHz, TA=25, (unless otherwise
noted.)
Parameter
Symbol
Conditions
ViL
SO Driving Current
IStandBy
IDD
IDrSO
SC Driving Current
IDrSC
TX2C ATS302T
Min
Typ
Max
-0.7
0.2
0.1
1.5
1.0
0.4
Units
V
uA
mA
Load=0.7V(1N4148)
11
11.5
mA
Load=0.7V(1N4148)
11
11.5
mA
Load=0.7V(1N4148)
7.5
8.0
PC Driving Current
IDrPC
Oscillator Frequency
RX2C ATS302R
-20%
+20%
Ftolerance
Tolerance
Fosc=128KHz
Code Speed
Fosc=128KHz
500
1000
SCode
Note 1: Function input pin means forward, Backward, Rightward, Leftward and Turbo inputs.
mA
%
Hz
RX2C ATS302R
Typical operating Conditions : VDD = 2.7V, Fosc = 128KHz, TA=25, NO using DC-DC
converter , (unless otherwise noted.)
Parameter
Symbol
Conditions
RX2C ATS302R
Min
Typ
Max
Units
Function Output
Unload
2.7
2.7
2.7
V
VO
voltage
Operating Current
Unload
0.2
1.0
mA
IDD
Output Driving
Load=0.7V(1N4148)
3.0
3.5
mA
IDriving
Current
Oscillator Frequency
TX2C ATS302T
-20%
+20%
%
Ftolerance
Tolerance
Fosc=128KHz
Note 1: Recommended operating voltage is 2.7V. The sensitivity of RX2C ATS302R will be higher.
2: Function Output pin means forward, Backward, Rightward, Leftward and Turbo outputs.
RX2C ATS302R
Typical operating Conditions : VINPUT=1.5V ,Fosc = 128KHz, TA=25, Using DC-DC
converter , (unless otherwise noted.)
Symb
ol
Conditions
VDD
Power Output
2.5
2.8
3.1
VO
Unload
2.5
2.8
3.1
VHOLD
Unload
0.8
Operating Current
IDD
UnloadUse recommended
DC-DC Circuit
Parameter
DC-DC output
Voltage
Fuction Output
voltage
RX2C ATS302R
Min Typ Max
Units
V
0.8
mA
Output Driving
Load=0.7V(1N4148)
3.0
3.5
mA
IDriving
Current
Oscillator Frequency
Ftoleranc
TX2C ATS302T
+20
-20%
%
Tolerance
Fosc=128KHz
%
e
Note 1: Function Output pin means forward, Backward, Rightward, Leftward and Turbo outputs.
2: VINPUT means the input Voltage to the DC/DC converter.
Version1. 02
-5May 15, 2004
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
3. The start-up voltage depends on the application circuit. 1.0V(Start-up) means that the
Schhottky Type Diode(IN5817) must be used.
Pin Description
TX2C ATS302T
PIN
NAME
1
RIGHTB
GND
BACKWARDB
FORWARDB
TURBOB
SC
SO
VDD
10
PC
11
12
OSCO
OSCI
14
LEFTB
RX2C ATS302R
PIN
NAME
1
VO2
2
GND
3
SI
4
OSCI
5
OSCO
6
RIGHT
7
LEFT
8
LX
MOD
10
11
12
13
14
15
16
BACKWARD
FORWARD
TURBO
VDD
VI1
VO1
VI2
Version1. 02
FUNCTION
The rightward function will be selected when this pin is connected
to GND.
Negative power supply
The backward function will be selected when this pin is
connected to GND.
The forward function will be selected when this pin is connected
to GND.
The turbo function will be selected when this pin is connected to
GND.
Output pin of the encoding signal with carrier frequency
Output pin of the encoding signal without carrier
frequency(Wireless)
Positive power supply
Power control output pin. When any function key is pulled low, PC
will be high logic. If not, it will be Low logic.
Oscillator output pin
Oscillator input pin
The leftward function will be selected when this pin is connected
to GND.
FUNCTION
Output pin for the Second amplify
Negative power supply
Input pin of the encoding signal
Oscillator input pin
Oscillator output pin
Rightward output pin
Leftward output pin
DC-DC converter Switch signal output pin. The LX pin should be
connected with a switch-transistor through a resistor for Limiting
the current.
Output-signal-format selection input control pin about Forward
function. High=Open. When Mod pin is open, the output Signal of
all the functions will be high logic if working respectively. When it
is pulled low, there is the other Format that the forward output will
vary from pulse format to high logic if there is corresponding
input. For detailed information, Please refer to output tables
Backward output pin
Forward output pin
Turbo output pin
Positive power supply
Input pin for the First amplify
Output pin for the first amplify
Input pin for the Second amplify
-6-
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
Output Tables
Function Key
Forward (L)
Forward (L) & Turbo (L)
Turbo (L)
Forward (L) & Left (L)
Turbo (L) & Left (L)
Turbo (L)& Forward (L) & Left
Forward (H) & Left (H)
Forward (Z) & Left (H)
(L)
Forward (L) & Right (L)
Forward (H)& Right (H)
Forward (Z)& Right (H)
Turbo (L) & Right (L)
Forward (H)& Right (H)
Forward (Z)& Right (H)
Turbo (L) & Forward (L) & Right
Forward (H)& Right (H)
Forward (Z)& Right (H)
(L)
Backward (L)
Backward (H)
Backward (Z)
Backward (L) & Right (L)
Backward (H) & Right (H)
Backward (Z) & Right (H)
Backward (L) & Left (L)
Backward (H)& Left (H)
Backward (Z)& Left (H)
Left (L)
Left (H)
Left (H)
Right (L)
Right (H)
Right (H)
Note 1:L=LOW, H=HIGH, Z= 84Hz 66.7% DUTY Pulse
2:The frequency of pulse depends on the local oscillator frequency. If the local
oscillator frequency is 128KHz, the frequency of pulse will be 84Hz.
3.And the duty of pulse will not vary in any case.
Version1. 02
-7-
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
Oscillator Circuit
R1
150K
120K
100K
82K
75K
TX2C ATS302T
OSCI
OSCO
12
11
R1
120K
C1
33p
Fosc=128KHz
C1
33p
33p
33p
33p
33p
Fosc
About 110KHz
About 134KHz
About 159KHz
About 190KHz
About 200KHz
Power on-off
ANTENNA
Control Handle
(L and R)
9V BATTERY
R
TX2C ATS302T
1
B
2
3
4
F
T
Control Handle
(F, T and B)
5
6
7
RIGHT LEFT
NC
GND
NC
OSCI
BACK OSCO
FORW
PC
TURBO VDD
SC
SO
27.145MHz
1K
330
LED
14
11
4.7uH
47uF
104
2.7uH
47p
13
12
120K
crystal
33p
C1815
120K
47p
47p
C1815
10
9
8
3V
104
100
35K
47p
100
100p
10p
47uF
6.8K
Version1. 02
-8-
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
R1
150K
120K
100K
82K
75K
RX2C ATS302R
OSCI
OSCO
4
5
R1
120K
C1
33p
Fosc=128KHz
C1
33p
33p
33p
33p
33p
Fosc
About 107KHz
About 130KHz
About 155KHz
About 184KHz
About 195KHz
ANTENNA
68p
8p
27.145MHz
C380
10uH
15p
+
332
560
1.5K
2.7V
104
330
1N4148
100uF
120K
4.7uF
2.2K
103
150
150
MOTOR
8550
104
2.2M
1K
104
A1015
8050
2.2K
8550
A1015
104
8050
1K
9
MOD
RX2C ATS302R
Fosc=128KHz
LX
10
BACK
LEFT
11
RIGHT FORW
OSCI
SI
GND
VO2
2.2M
OSCOTURBO
VDD
12
13
14
VI1
15
VO1
VI2
16
470p
150
150
Version1. 02
8550
1K
120K
2.2K
302
MOTOR
8550
A1015
A1015
8050
104
8050
Power
on-off
1K
4*AA
33p
BATTERY
-9-
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
R1
150K
120K
100K
82K
75K
RX2C ATS302R
OSCI
OSCO
4
5
R1
120K
C1
33p
Fosc=128KHz
C1
33p
33p
33p
33p
33p
Fosc
About 107KHz
About 130KHz
About 155KHz
About 184KHz
About 195KHz
ANTENNA
68p
8p
27.145MHz
C380
10uH
15p
+
332
560
1.5K
2.7V
104
330
1N4148
100uF
120K
4.7uF
2.2K
103
150
150
MOTOR
8550
104
2.2M
1K
104
A1015
8050
2.2K
8550
A1015
104
8050
1K
9
MOD
RX2C ATS302R
Fosc=128KHz
LX
10
BACK
LEFT
11
RIGHT FORW
OSCI
SI
GND
VO2
2.2M
OSCOTURBO
VDD
12
13
14
VI1
15
VO1
VI2
16
470p
150
150
120K
2.2K
302
Version1. 02
8550
MOTOR
1K
8550
A1015
A1015
8050
104
8050
Power
on-off
1K
4*AA
33p
BATTERY
- 10 -
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
R1
150K
120K
100K
82K
75K
Oscillator Circuit
RX2C ATS302R
OSCI
OSCO
4
5
R1
120K
C1
33p
Fosc=128KHz
C1
33p
33p
33p
33p
33p
Fosc
About 107KHz
About 130KHz
About 155KHz
About 184KHz
About 195KHz
ANTENNA
68p
8p
8550
27.145MHz
8550
100
C380
10uH
MOTOR
15p
8050
+
332
100
8050
104
120K
560
560
4.7uF
103
2.2K
560
1.5K
Backward
Forward
104
9
MOD
BACK
LX
LEFT
OSCI
4
GND
SI
3
RX2C ATS302R
Focs=128KHz
Left
Right
3K
Version1. 02
8050
560
100uH
8050
560
8050
103
302
IN5817
Left
104 100uF
120K
2.2K
Electromagnetic
Power(L&R)
Right
VO2
2.2M
OSCOTURBO
12
13
VDD
14
VI1
15
VO1
VI2
16
470p
RIGHT FORW
11
Forward
104
2.2K
10
Backward
2.2M
33p
- 11 -
1.2V
BATTERY
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
14
13
LEFTB NC
12
OSCI
11
OSCO
9
VDD
10
PC
1~4.7
8
SO
TX2C ATS302T
DC:3V 100uF
Photo Diode
100K
VDD
16
15 14
13
12
11
10
9
VI2 VO1 VI1 VDD TURBO FORWARD BACKWARD MOD
DC:5V
100uF
57KHz OUT
IR Receiver
RX2C ATS302R
1815
GND
OSCO
5
RIGHT
6
LEFT
7
LX
8
Fosc=114KHz
Testing Circuit
NO using DC-DC TX2C ATS302T/RX2C ATS302R (128KHz)
JUMPER
14
13
LEFTB NC
3V
12
OSCI
120K
11
OSCO
9
VDD
10
PC
16
15 14
13
12
11
10
9
VI2 VO1 VI1 VDD TURBO FORWARD BACKWARD MOD
8
SO
TX2C ATS302T
100uF
33p
RX2C ATS302R
OSCO
5
RIGHT
6
LEFT
7
LX
8
120K
33p
12
OSCI
11
OSCO
10
PC
9
VDD
8
SO
16
15 14
13
12
11
10
9
VI2 VO1 VI1 VDD TURBO FORWARD BACKWARD MOD
TX2C ATS302T
2.7V
RX2C ATS302R
100uF
104
120K
14
13
LEFTB NC
JUMPER
100uF
33p
OSCO
5
RIGHT
6
5817
LEFT
7
LX
8
3K
120K
33p
Version1. 02
- 12 -
100uH
8050
1.5V
103
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
Package Information
TX2C ATS302T DIP 14 Pin Outline Drawing
Unit in mm
Unit in mm
Version1. 02
- 13 -
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
Version1. 02
- 14 -
Unit in mm
Unit in mm
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
SO
VDD
PC
OSCO
OSCI
LEFTB
Designation
TX2C ATS302T
SC
TURBOB
FORWARDB
RIGHTB
774
773
GND
626
773
BACKWARDB
504
773
FORWARDB
382
773
TURBOB
260
773
SC
66
773
SO
66
66
239
66
VDD
BACKWARDB
GND
RIGHTB
about
0.84m m
PC
341
66
OSCO
444
66
OSCI
626
66
LEFTB
774
66
Unit in um
X:840 Y:840
about 0.84m m
Note: Subs trate is connected to VDD
RX2C ATS302R
Designation
MOD
BACKWARD
FORWARD
TURBO
VDD
VI1
VO1
VI2
VO2
LX
LEFT
RIGHT
OSCO
OSCI
SI
GND
VO2
RX2C ATS302R
81
134
GND
206
80
SI
321
80
OSCI
464
80
OSCO
647
80
RIGHT
803
80
LEFT
about
1.18m m
923
80
LX
1113
134
MOD
1066
1049
BACKWARD
920
1099
FORWARD
765
1099
TURBO
581
1099
VDD
466
1099
VI1
321
1099
VO1
206
1099
81
1049
VI2
Unit in um
X:1200 Y:1180
about 1.20m m
Version1. 02
- 15 -
Actions Semiconductor Co., Ltd. 5-Function Remote Controller TX2C ATS302T/RX2C ATS302R
Version List
Version
1.00
1.01
1.02
Release date
2003/4/28
2003/9/1
2004/5/15
Comment
First Version
(1) Modify the information of COB package
(2) Modify the value of resistor that lays between
the LX pin and the switch-transistor in the test
and application circuit
(1)Update the product number
Notice: ACTIONS's products are sold by description only, ACTIONS reserves the rights to make
changes in circuit design and/or specification at any time without notice. Accordingly, the reader is
cautioned to make sure the latest version of data sheets are available before placing orders.
Version1. 02
- 16 -