0 évaluation0% ont trouvé ce document utile (0 vote)
53 vues3 pages
Gel filtration is a chromatographic technique that separates molecules based on size. It works by suspending a gel like dextran or agarose in a column, which creates pores that allow small molecules to pass through slowly and large molecules to pass through more quickly. This separates a sample into its components as it passes through. Gel filtration is useful for purifying proteins by removing unwanted proteins of different sizes, and can also determine a protein's molecular weight by comparing its elution volume to a calibration curve of proteins with known weights. In this experiment, a Sephadex column will be prepared and used to separate mixtures of proteins and determine the molecular weight of an unknown protein.
Gel filtration is a chromatographic technique that separates molecules based on size. It works by suspending a gel like dextran or agarose in a column, which creates pores that allow small molecules to pass through slowly and large molecules to pass through more quickly. This separates a sample into its components as it passes through. Gel filtration is useful for purifying proteins by removing unwanted proteins of different sizes, and can also determine a protein's molecular weight by comparing its elution volume to a calibration curve of proteins with known weights. In this experiment, a Sephadex column will be prepared and used to separate mixtures of proteins and determine the molecular weight of an unknown protein.
Gel filtration is a chromatographic technique that separates molecules based on size. It works by suspending a gel like dextran or agarose in a column, which creates pores that allow small molecules to pass through slowly and large molecules to pass through more quickly. This separates a sample into its components as it passes through. Gel filtration is useful for purifying proteins by removing unwanted proteins of different sizes, and can also determine a protein's molecular weight by comparing its elution volume to a calibration curve of proteins with known weights. In this experiment, a Sephadex column will be prepared and used to separate mixtures of proteins and determine the molecular weight of an unknown protein.
Gel filtration is a chromatographic technique that separates different molecules on the
basis of size. It is commonly used during protein purification to remove unwanted proteins from the protein being purified. It can also be used to determine the molecular weight of a protein. In gel filtration, a dextran, polyacrylamide, or agarose gel is suspended in buffer and packed in a glass or plastic column. The sample to be analyzed is applied to the top of the column and is allowed to run down into the gel. A continuous supply of buffer is then provided at the top of the column, and, as the buffer runs through the column, the components in the sample are carried down the gel and separated. The buffer is collected at the bottom of the column in fractions of constant volume (i.e. 1.0 mL), and all the fractions are analyzed for the presence of the various components in the sample. The separation of the components is caused by cross-linking in the gel which creates pores. Small molecules can penetrate the pores and so are slowed down and retained as they pass down the column. Large molecules cannot penetrate the pores and so run down the column quickly. Gels with different degrees of cross-linking (and therefore different sized pores) are commercially available to separate molecules in different molecular weight ranges. In this experiment, Sephadex G-75 will be used. This gel is a dextran capable of separating proteins with molecular weights between 3000 and 70,000. For a Sephadex column, the total volume, Vt, is equal to the sum of the volume of the gel matrix, the volume inside the gel matrix, and the volume outside the matrix. The total volume is also , in most cases, equal to the amount of the buffer required to run a substance through the column (also known as eluting a substance) when the substance is small enough to completely penetrate the pores of the gel. Such a substance is said to be completely included by the gel. For Sephadex G-75, compounds with molecular weights less than 3000 are completely included. The volume outside the gel matrix is known as the void volume, Vo. This is the volume required to elute a substance so large that it cannot penetrate the pores at all. Such a substance is said to be completely excluded by the gel. For Sephadex G-75, proteins with molecular weights greater than 70,000 are completely excluded. Compounds with intermediate molecular sizes that can partially penetrate the pores elute between the void volume and the total volume, and are said to be partially included by the gel. The volume of buffer required to elute any given substance is known as the elution volume, Ve, of the compound. Thus on Sephadex G-75, a protein with a molecular weight of 60,000 will be less included than a protein with a molecular weight of 30,000. The larger protein will have a smaller elution volume and run through the column more quickly than the smaller protein.
Figure 1(Source: Fundamentals of Biochemistry: Life at the Molecular Level by Donald Voet, Judith G. Voet, Charlotte W. Pratt.)
During protein purification, a mixture of many proteins can be subjected to gel
filtration, and all proteins that have molecular weights different from the one being purified can be separated out. Thus gel filtration is a powerful technique for purifying a protein. Gel filtration can also be used to determine the molecular weight of a protein. To do this, several proteins with known molecular weights are run on the column and their elution volumes determined. If the elution volumes are then plotted against the log molecular weight of the corresponding proteins, a straight line is obtained for the separation range of the gel being used. If the elution volume of a protein of unknown molecular weight is then found, it can be compared to the calibration curve and the molecular weight determined. Gel filtration has many advantages as a biochemical technique. It is relatively simple to perform, and the mild conditions used tend to prevent denaturation of proteins, unlike some other techniques. The protein that runs off the column can be collected and used for further analysis, so no protein is consumed in gel filtration. However, there are also disadvantages as well. The column must be carefully prepared to obtain optimal separation. Any cracks or discontinuities in the column will interfere. The size of the sample and the rate of buffer flow must be strictly controlled. If a column is run several times, each run must be done under the exact same conditions in order to compare the different runs. finally, some substances stick to Sephadex and do not elute properly. In this experiment, a Sephadex column will be prepared. Five substances of known molecular weight will be used to construct a calibration curve. Then another protein will be run on the column, its molecular weight determined, and the results compared to the known size of the protein.
consequently, the large molecules move
more rapidly through the column, and in this way the mixture can be separated (fractionated) into its components
the porosity of the gel can be adjusted to
exclude all molecules above a certain size
Sephadex, Sepharose or Sephacryl, which
are fine porous beads, are trade names for gels that are available commercially in a broad range of porosities