Académique Documents
Professionnel Documents
Culture Documents
STAIRCLIMBERS
SR1750
The SR1750 is designed to carry unit loads weighing up to 1000kg up and down stairs. The accessory equipment,
stair approach ramp, manoeuvring dolly and the turntable have been designed to assist the movement up to
and onto the stairs and the take off from the top and journey to the final destination.
The SR1750 is equipped with a hydraulic levelling platform which makes it possible to transport fragile loads in
horizontal position throughout operation.
The SR1750 not only reduces the number of men required for a professional move but also greatly reduces the
hazards involved in a traditional stair move.
SPECIFICATIONS
Maximum capacity
SR1750
(kg)
1000
(mtr/min)
Maximum angle
(deg)
45
Length
(mm)
1185
Width
(mm)
720
Height
(mm)
320
(mm)
1180
(mm)
720
Speed
(kw/Hp)
0.75/1
(v)
220 or 110
(kw/Hp)
0.375/0.5
(v)
220 or 110
(kg)
175
STAIR ROBOT
STAIRCLIMBERS
SR1750
Drive:
Driving power is provided by a minimal noise, single phase AC motor with thermal cut out and is transmitted to the
drive axle by a built-on worm-gearbox. The worm wheel reduction forms an effective brake if the current is
interrupted for any reason.
Hydraulic levelling platform:
The hydraulic levelling platform is operated by a
Single phase, low noise AC motor with thermal cut out.
A hydraulic pump is built directly onto the motor.
The lowering speed of the platform can be adjusted
by the descent adjuster.
Control:
The robot is controlled by a low voltage (24V) manually
operated 4-button switchbox connected to the stair
robot with a 2 meter remote control cable.
Loading winch and ramp:
The winch is designed to fit into the lifting platform of the SR1750. With the additional winch
and ramp a load can be hand pulled onto the SR1750 with a minimum of effort.
Dolly:
A heavy duty dolly is available for handling long and bulky
objects. The dolly is used to transport the (loaded) SR1750 to
and on the stairs and is used at the landing.
The dolly is constructed of square steel fittings with four heavy
duty swivel wheels for easy movements.
An extendable frame can be pulled out to increase stability
while driving the SR1750 on the dolly. The lead off ramp is used
to connect the dolly with the stairway.