Académique Documents
Professionnel Documents
Culture Documents
Generic Type
Low VOC two pack high solids acrylic polyurethane gloss finish.
Base and hardener mixed prior to application.
General Properties
Technical Information
Gloss
Standard color range
Two
71 2%
50 to 125 um
27 deg. C ( when mixed )
Approx. 1.30
90 deg. C ( continuous )
125 deg. C ( intermittent )
Packaging ................................ 5.0 litres ( 4.5 litres Part A : 0.5 litres Part B )
Shelf life ................................... 12 months minimum
Finish .......................................
Color ........................................
Component ..............................
Volume Solids ..........................
Dry Film Thickness ...................
Flash Point ...............................
Specific Gravity ........................
Temperature Resistance ..........
Substrate Surface
Steel
Protective Coating
Finish
Korethane 310HS
Application Method
Airless Spray
Tip Size : 0.43 - 0.53 mm ( 17 - 21 thou )
Recommended method of application Pressure : 110 - 165 kg / cm2 ( 1600 - 2300 psi )
Conventional Spray
Brush or Roller
: Can be used
: Recommended for stripe coating and small
areas only
Substrate
Temperature
Touch Dry
Hard Dry
15 deg. C
25 deg. C
35 deg. C
3 hours
2 hours
1 hours
10 hours
6 hours
3 hours
Overcoating Interval
Minimum Maximum
10 hours Indefinite
6 hours Indefinite
3 hours Indefinite
Pot Life
3 hours
2 hours
1 hours
* The properties above may vary with surface temperature, site environment, film thickness, etc.
Thinner
Cleaner
Storage
The above information is given to the best of our knowledge based on laboratory tests and practical experience.
However, since we cannot anticipate or control the many conditions under which our products may be used, we
can guarantee the quality of product itself.
Primed Surfaces
Application
Temperatures
Mixing
Product Limitations
Protective Coating
Volume solids values stated are for guidance purpose only and
may be subject to variation depending on factors such as colour
and manufacturing tolerances.
Safety Precaution
This product is flammable and must be kept away from any source
of ignition. Use under well ventilated conditions. Do not breathe or
inhale mist. Avoid skin contact. Spillage on the skin should
immediately be removed with suitable cleanser, soap and water.
Eyes should be well flushed with water and medical attention
sought immediately. Keep out of reach of children.
Disclaimer: The above information is given to the best of our knowledge based on laboratory testing and practical experience.
However, as the product is often used under conditions beyond our control, we cannot guarantee anything but the quality of
the product itself. We reserve the right to change the given information without prior notice.
No1, Jalan Anggerik Mokara 31/55, Seksyen 31, Kota Kemuning, 40460 Shah Alam, Selangor Darul Ehsan. Tel : 03 - 5122 2900