Vous êtes sur la page 1sur 2

JO RI

D
& LS
JF
L
CHALLENGE
PRODUCTS
MODEL JO & JF PAPER DRILLS

JO Table -Model Paper Drill with


hand lever operated drill head
and manual trip side guide

JF Model Paper Drill with


foot pedal drilling action and
automatic trip side guide with
micrometer adjustment
JO & JF PAPER DRILLS
The Versatile Corner, Slit, and Slot 2˝ Lift Capacity
Optional attachments make your Large two-inch drilling capacity is
Model JO & JF Challenge single-spindle drills even available with Challenge 1⁄4˝ to 1⁄2˝
Single-Spindle more productive. Round cornering diameter drill bits. Smaller drill bits
attachments can corner lifts in 1⁄8˝, 1⁄4˝, will handle lifts from 5⁄8˝ to 15⁄8˝,
Paper Drills 7
⁄16˝, or make straight diagonal cuts. depending on the bit size.
For slitting, slotting, or V-slotting
Drill, Corner, Slit or drilled holes, use our special 1⁄2˝ lift Meeting Your Needs
capacity slit/slot attachment. For more information on the JO and
Slot with Manually JF drills or other Challenge products
Operated Drill Automatic Chip Disposal to increase your bindery production,
Paper chips travel up through the drill contact your authorized Challenge
Heads. Both Models bit and drop into a removable waste dealer.
Provide Economical bin. Your jobs keep moving and
clean-up time is kept to a minimum.
Yet Productive
Quality Drilling
Features Specifications
• Hand Lever Operation (JO Model) Model JO JF
• Foot Pedal Operation (JF Model) DRILLING
Drill Head Operation Hand Lever Foot Pedal
• 2˝ Drilling Capacity
Maximum Drilling Capacity * 2ý/51 mm *
• 13 Hollow Drill Bit Sizes Drill Sizes Available 13 Sizes: 1Ú8ý to 1Ú2ý/3 - 13 mm
• Automatic Paper Chip Removal Adjustable Backgauge Stops 3 stops 7 stops
Minimum Distance Between Holes
• Adjustable Margins - Adjustable Stops Ú8ý/10 mm
3

• Auto Trip Side Guide (JF Model) - Fixed Gauges Ú4ý/6.4 mm


1

Adjustable Range - Drill to Side Guide 0 to 12ý/0 – 30 cm 0 to 181Ú2ý/0 – 47 cm


• Built to Perform Adjustable Range - Drill to Backgauge 0 to 23Ú4ý/0 – 7 cm 0 to 4ý/0 – 10 cm
Side Guide Trip Manual Automatic
Standard Equipment Cornering Capacity 1 ý
Ú2 /13 mm (1ý/2.5 cm using
• Two Hollow Drill Bits – Cornermatic Attachment–JF Only)
1 ý
one 1⁄4˝ and one 5⁄16˝ Slit / V-Slot Capacity Ú2 /13 mm
1 DIMENSIONS
• 1 ⁄2˝ Wood Drilling Blocks –
Overall Height 25ý/64 cm 60ý/152 cm
two included with JO Model, Table Size 18ý x 18ý/46 x 46 cm 191Ú2ýx 311Ú2ý/50 x 80 cm
twelve with JF Model Table Height — 38ý/97 cm
• Locking Backgauge Footprint 18ýx 27ý/46 x 69 cm 32ýx 42ý/81 x107 cm
Net Weight (approximate) 52 lbs/24 kg 154 lbs/70 kg
• Tool Kit
Shipping Weight (approximate) 72 lbs/33 kg 225 lbs/102 kg
ELECTRICAL
Fast Setup Spindle Motor (both models): Ú H.P., 115 Volts, 5.3 Amps, 60 Hz, AC, Single Phase
14
Adjustable stops on the backgauge Service size 15 Amps.
allow you to easily set any hole * Smaller-diameter drill bits will do lifts 5Ú8" to 15Ú8" depending on bit size.
pattern. For even quicker setup,
Challenge reserves the right to make changes to any product or specification without notice and without incurring
purchase our optional fixed gauges responsibility to existing units.
with pre-set stops for standard hole ® Challenge is a registered trademark of The Challenge Machinery Company.

patterns.
For information on these and other Challenge products, call
Easy to Adjust your local Challenge dealer, or for the dealer nearest you contact:
50/10 Recycled Paper

Thumb screws easily lock the back- The Challenge Machinery Company
gauge to the drill table. To adjust your 1433 Fulton Avenue, Grand Haven, MI 49417-1594 U.S.A.
margins, simply loosen the screws and 616-842-8300
line up the gauge with the dual scales www.ChallengeMachinery.com
located on the drill table.
© 2000 The Challenge Machinery Company. All rights reserved. Printed in the U.S.A. ADV-014/0500/5M/CSP/000062

Vous aimerez peut-être aussi