Académique Documents
Professionnel Documents
Culture Documents
, LTD
8050S
DESCRIPTION
The UTC 8050S is a low voltage high current small signal NPN
transistor, designed for Class B push-pull audio amplifier and
general purpose applications.
FEATURES
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen-Free
8050SG-x-AE3-R
8050SL-x-T92-B
8050SG-x-T92-B
8050SL-x-T92-K
8050SG-x-T92-K
Note: Pin Assignment: B: Base
C: Collector
E: Emitter
Package
SOT-23
TO-92
TO-92
Pin Assignment
1
2
3
E
B
C
E
C
B
E
C
B
Packing
Tape Reel
Tape Box
Bulk
MARKING
SOT-23
TO-92
D9_DG
www.unisonic.com.tw
Copyright 2015 Unisonic Technologies Co., Ltd
1 of 4
QW-R206-001.I
8050S
PARAMETER
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Collector Current
RATINGS
UNIT
30
V
20
V
5
V
700
mA
SOT-23
350
mW
Collector Dissipation(TA=25C)
PC
TO-92
1
W
Junction Temperature
TJ
+150
C
Storage Temperature
TSTG
-40 ~ +150
C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
SYMBOL
VCBO
VCEO
VEBO
IC
PARAMETER
Collector-Base Breakdown Voltage
Collector-Emitter Breakdown Voltage
Emitter-Base Breakdown Voltage
Collector Cut-Off Current
Emitter Cut-Off Current
SYMBOL
BVCBO
BVCEO
BVEBO
ICBO
IEBO
hFE1
hFE2
hFE3
VCE(SAT)
VBE(SAT)
VBE(SAT)
fT
Cob
TEST CONDITIONS
IC = 100A, IE = 0
IC = 1mA, IB = 0
IE = 100A, IC =0
VCB = 30V,IE = 0
VEB = 5V, IC = 0
VCE = 1V, IC = 1mA
VCE = 1V, IC = 150 mA
VCE = 1V, IC = 500mA
IC = 500mA, IB = 50mA
IC = 500mA, IB = 50mA
VCE = 1V, IC = 10mA
VCE = 10V, IC = 50mA
VCB = 10V, IE = 0, f = 1MHz
MIN
30
20
5
TYP
100
120
40
MAX UNIT
V
V
V
1
uA
100
nA
400
0.5
1.2
1.0
100
9.0
V
V
V
MHz
pF
CLASSIFICATION OF hFE2
RANK
RANGE
C
120-200
D
160-300
E
280-400
2 of 4
QW-R206-001.I
Current Gain-Bandwidth
Product, f(MHz)
8050S
NPN SILICON TRANSISTOR
TYPICAL CHARACTERISTICS
www.unisonic.com.tw
QW-R206-001.I
3 of 4
8050S
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
4 of 4
QW-R206-001.I