Académique Documents
Professionnel Documents
Culture Documents
Welcome
Thank you for choosing the Cisco 200 Series Smart Switch, a Cisco Small
Business network communications device. This device is designed to be
operational right out-of-the-box as a standard bridge. In the default
configuration, it will forward packets between connecting devices after
powered up.
Package Contents
Cisco SF 200-24, SF 200-24P, SF 200-48, SF 200-48P, SG 200-18, SG
200-26, SG 200-26P, SG 200-50, or SG 200-50P Smart Switch.
Rackmount Kit.
Power Cord.
This Quick Start Guide.
Product CD.
This guide will familiarize you with the layout of the smart switch and
describe how to deploy the device in your network. For additional
information, see www.cisco.com/smb.
Rack-Mount Placement
If your switch is rack-mount capable, it will come with a rack-mount kit. To
rack-mount the switch in any standard rack, attach the brackets to the
sides of the switch with the supplied hardware and secure the brackets.
CAUTION
For stability, load the rack from the bottom to the top, with the
heaviest devices on the bottom. A top-heavy rack is likely to
be unstable and might tip over.
Ports
16 and 1318
112 and 2536
Use the following table to determine the total power budget available for
all devices on your switch.
Model
SF 200-24P
SF 200-48P
SG 200-26P
SG 200-50P
a.
example, http://192.168.1.254.
The Smart Switch Login page displays.
STEP 6 Enter the login information:
Username is cisco
Default password is cisco (passwords are case sensitive)
STEP 7 If this is the first time that you have logged on with the default
CAUTION
Make sure that any configuration changes that you made are
saved before exiting from the web-based interface by
clicking on the Save icon, then clicking Apply. Exiting before
you save your configuration will result in all changes being
lost.
The Getting Started window displays. You are now ready to configure the
switch. Refer to the Cisco Small Business Smart Switch Administration
Guide for further information.
200 Series Smart Switches
This section describes the exterior of the smart switches including ports,
LEDs, and connections. Not all models will have all of the features
described.
Ports
RJ-45 Ethernet PortsUse these ports to connect network devices, such
as computers, printers, and access points, to the switch.
MiniGBIC (if present)The miniGBIC (gigabit interface converter) ports are
connection points for miniGBIC modules, so the smart switch can uplink to
other switches by using optical fiber.
MiniGBIC ports are compatible with Cisco miniGBIC modules MGBSX1,
MGBLH1, MGBLX1, MGBBX1, MFELX1, MFEFX1, and MFEBX1, as well
as other brands of miniGBIC modules.
MiniGBIC interface is a combination port, shared with one other RJ-45
interface. When the MiniGBIC is active, the adjacent RJ-45 port is
disabled.
The LEDs of the corresponding RJ-45 port flashes green to respond to
the miniGBIC interface traffic.
LEDs
System LED(Green) Lights steady when the switch is powered on, and
flashes when booting, performing self tests, and acquiring an IP address. If
the LED flashes amber, the switch has detected a hardware failure.
LINK/ACT LED(Green) Located on the left of the port. Lights steady
when a link between the corresponding port and another device is
detected. Flashes when the port is passing traffic.
NOTE The System and LINK/ACT LEDs are on each model of the switch.
The following LEDs are only present on switch models that have those
capabilities:
PoE (if present)(Amber) Located on the right of the port. Lights steady to
indicate that power is being supplied to a device attached to the
corresponding port.
100M LED (if present)(Green) Located on the right of the port. Lights
steady when another device is connected to the port, is powered on, and a
100 Mbps link is established between the devices. When the LED is off, the
connection speed is under 100 Mbps or nothing is cabled to the port.
Gigabit LED (if present)(Green) Located on the right of the port. Lights
steady when another device is connected to the port, is powered on, and a
1000 Mbps link is established between the devices. When the LED is off,
the connection speed is under 1000 Mbps or nothing is cabled to the port.
MiniGBIC (if present)(Green) Located on the right of the port. Lights
steady when a connection is made through the shared RJ-45 port. Flashes
when the port is passing traffic.
Additional Features
The switch might also have a reset button. The switch can be reset by
inserting a pin or paper clip into the reset opening. See Returning the
Device to the Factory Default Settings for details.
Back Panel
The power port is located on the back panel of the smart switch.
To use the Reset button to reboot or reset the smart switch, do the
following:
To reboot the smart switch, press the Reset button for less than 10
seconds.
To restore the smart switch configuration to the factory default
settings:
1. Disconnect the smart switch from the network or disable all DHCP
servers on your network.
2. With the power on, press and hold the Reset button for more than
10 seconds.
Support
Cisco Small Business Support
Community
www.cisco.com/go/smallbizsupport
www.cisco.com/go/smallbizhelp
www.cisco.com/en/US/support/tsd_cisco_
small_business_support_center_contacts.html
www.cisco.com/go/smallbizfirmware
Select a link to download firmware for Cisco
Small Business Products. No login is required.
Downloads for all other Cisco Small Business
products, including Network Storage Systems,
are available in the Download area on
Cisco.com at www.cisco.com/go/software
(registration/login required).
Product Documentation
Cisco Small Business Smart
Switches
www.cisco.com/go/smallbizsmartswitches
www.cisco.com/en/US/docs/switches/lan/
csbss/sf20x_sg20x/quick_start/78-1950101.pdf
www.cisco.com/en/US/docs/switches/lan/
csbss/sf20x_sg20x/administration_guide/OL22849-01.pdf
www.cisco.com/en/US/docs/switches/lan/
csbms/sfe2000/release/notes/
Class_A_Switches_RCSI.pdf
Warranty Information
www.cisco.com/go/warranty
www.cisco.com/web/partners/sell/smb
www.cisco.com/smb
10
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Small Business Support US: 1-866-606-1866 (Toll Free, 24/7)
Small Business Support Global Contact Numbers
Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks
or trademarks of Cisco and/or its affiliates in the United States and certain other countries. All
other trademarks mentioned in this document or website are the property of their respective
owners. The use of the word partner does not imply a partnership relationship between Cisco
and any other company. (1002R)
2010 Cisco Systems, Inc. All rights reserved.
Bienvenido
Gracias por elegir el Cisco 200 Series Smart Switch, un dispositivo de
comunicaciones de red Cisco Small Business. Este dispositivo est
diseado y configurado de fbrica para que funcione como un puente
estndar. En la configuracin predeterminada, reenviar paquetes entre
los dispositivos de conexin tras el encendido.
Contenido de la caja
Cisco SF 200-24, SF 200-24P, SF 200-48, SF 200-48P, SG 200-18, SG
200-26, SG 200-26P, SG 200-50 o SG 200-50P Smart Switch.
Kit de montaje en bastidor.
Cable de alimentacin elctrica.
Esta gua de inicio rpido.
CD del producto.
Esta gua lo ayudar a familiarizarse con el diseo del switch inteligente y
describir cmo implementar el dispositivo en la red. Para obtener ms
informacin, vaya a www.cisco.com/smb.
13
Puertos
16 y 1318
112 y 2536
Antes de comenzar
Asegrese de contar con una computadora con Microsoft Internet
Explorer (versin 6 o superior) o Firefox (versin 2.0 o superior).
15
a.
16
17
Puertos
Puertos Ethernet RJ-45: use estos puertos para conectar dispositivos de
red, como computadoras, impresoras y puntos de acceso al switch.
MiniGBIC (si hubiera): los puertos miniGBIC (convertidor de interfaz
gigabit) son puntos de conexin para los mdulos miniGBIC, para que el
switch inteligente pueda tener un vnculo ascendente con los otros
switches al usar fibra ptica.
Los puertos MiniGBIC son compatibles con los mdulos miniGBIC
MGBSX1, MGBLH1, MGBLX1, MGBBX1, MFELX1, MFEFX1 y MFEBX1 de
Cisco, adems de otras marcas de mdulos miniGBIC.
La interfaz MiniGBIC es un puerto de combinacin, compartido con otra
interfaz RJ-45. Si el MiniGBIC est activo, el puerto RJ-45 adyacente
est habilitado.
Los indicadores LED del puerto RJ-45 correspondiente parpadean en
verde para responder al trfico de interfaz miniGBIC.
18
Indicadores
Indicador LED del sistema: se enciende en color verde de forma
permanente si el switch est encendido y parpadea en el inicio, al realizar
pruebas automticas y al adquirir una direccin IP. Si el indicador LED
parpadea en color mbar, el switch ha detectado una falla del hardware.
Indicador LED LINK/ACT: (verde) ubicado del lado izquierdo del puerto. Se
enciende de forma permanente si se detecta un vnculo entre el puerto
correspondiente y otro dispositivo. Parpadea si hay paso de trfico en el
puerto.
NOTA Los indicadores LED del sistema y LINK/ACT se encuentran en el
mismo modelo del switch. Los siguientes indicadores LED slo estn
presentes en los modelos de switch que tienen esas capacidades:
PoE (si hubiera): (mbar) ubicado del lado derecho del puerto. Se enciende
de forma permanente para indicar que el dispositivo conectado al puerto
correspondiente recibe energa.
Indicador 100M (si hubiera): (verde) ubicado del lado derecho del puerto.
Se enciende de forma permanente si hay otro dispositivo conectado al
puerto, si el switch est encendido y si se establece un vnculo de 100
Mbps entre los dispositivos. Si el indicador LED est apagado, la velocidad
de conexin es inferior a 100 Mbps o no hay ningn cable hacia el puerto.
Indicador LED Gigabit (si hubiera): (verde) ubicado del lado derecho del
puerto. Se enciende de forma permanente si hay otro dispositivo
conectado al puerto, si el switch est encendido y si se establece un
vnculo de 1000 Mbps entre los dispositivos. Si el indicador LED est
apagado, la velocidad de conexin es inferior a 1000 Mbps o no hay
ningn cable hacia el puerto.
MiniGBIC (si hubiera): (verde) ubicado del lado derecho del puerto. Se
enciende de forma permanente si la conexin se realiza a travs del puerto
RJ-45 compartido. Parpadea si hay paso de trfico en el puerto.
Caractersticas adicionales
El switch tambin tiene un botn de reinicio. Parar restablecer el switch,
puede insertar una clavija o un sujetapapeles en el orificio de
restablecimiento. Para obtener ms informacin, consulte Cmo
restablecer la configuracin predeterminada de fbrica del
dispositivo.
19
Panel posterior
El puerto de encendido se encuentra en el panel posterior del switch
inteligente.
20
Cmo seguir
Asistencia tcnica
Comunidad de asistencia
tcnica de Cisco para la PYME
www.cisco.com/go/smallbizsupport
www.cisco.com/go/smallbizhelp
www.cisco.com/en/US/support/tsd_cisco_
small_business_support_center_contacts.html
Descargas de firmware de
Cisco Small Business
www.cisco.com/go/smallbizfirmware
Seleccione un vnculo para descargar
firmware para los productos Cisco Small
Business. No se debe iniciar sesin.
Las descargas para los dems productos
Cisco Small Business, incluidos los sistemas
de almacenamiento de red, se encuentran
disponibles en el rea Download (Descargar)
en Cisco.com en www.cisco.com/go/software
(se requiere registro/inicio de sesin).
www.cisco.com/go/smallbizsmartswitches
www.cisco.com/en/US/docs/switches/lan/
csbss/sf20x_sg20x/quick_start/78-1950101.pdf
www.cisco.com/en/US/docs/switches/lan/
csbss/sf20x_sg20x/administration_guide/OL22849-01.pdf
www.cisco.com/en/US/docs/switches/lan/
csbms/sfe2000/release/notes/
Class_A_Switches_RCSI.pdf
Informacin de la garanta
www.cisco.com/go/warranty
www.cisco.com/web/partners/sell/smb
www.cisco.com/smb
21
Cisco, Cisco Systems, el logotipo de Cisco y el logotipo de Cisco Systems son marcas
comerciales registradas o marcas comerciales de Cisco o sus afiliados en Estados Unidos y
otros pases. Todas las dems marcas comerciales mencionadas en este documento o sitio
web son propiedad de sus respectivos dueos. El uso de la palabra socio no implica una
relacin de sociedad entre Cisco y cualquier otra compaa. (1002R)
2010 Cisco Systems, Inc. Todos los derechos reservados.
Benvenuti
Grazie per aver scelto lo smart switch Cisco serie 200, un dispositivo di
comunicazioni di rete di Cisco Small Business. Questo dispositivo
concepito per essere operativo out-of-the-box come ponte standard. Nella
configurazione predefinita, dopo l'accensione, lo switch reindirizza i
pacchetti tra i dispositivi di connessione.
Contenuto della confezione
Cisco SF 200-24, SF 200-24P, SF 200-48, SF 200-48P, SG 200-18, SG
200-26, SG 200-26P, SG 200-50 o SG 200-50P Smart Switch
Kit di montaggio in rack
Cavo di alimentazione
La presente guida di riferimento rapido
CD del prodotto
Questa guida consente di familiarizzare con il layout dello smart switch e
descrive come distribuire il dispositivo nella rete. Per ulteriori informazioni,
visitare il sito www.cisco.com/smb.
24
PRECAUZIONE
PASSAGGIO 2
PASSAGGIO 3
25
Porte
1-6 e 13-18
1-12 e 25-36
Operazioni preliminari
Verificare che sia disponibile un computer con Microsoft Internet Explorer
(versione 6 o successiva) o Firefox (versione 2.0 o successiva).
26
PASSAGGIO 2
PASSAGGIO 3
b.
PASSAGGIO 5
PASSAGGIO 6
PASSAGGIO 7
27
PRECAUZIONE
PASSAGGIO 2
28
Porte
Porte Ethernet RJ-45. Utilizzare queste porte per collegare i dispositivi di
rete quali computer, stampanti e punti di accesso allo switch.
Mini-GBIC (se presenti). Alle porte di conversione dell'interfaccia Gigabit
possibile collegare moduli di espansione mini-GBIC per consentire di
collegare lo smart switch ad altri switch mediante fibra ottica.
Le mini porte di conversione dell'interfaccia Gigabit sono compatibili
con i moduli Cisco mini-GBIC MGBSX1, MGBLH1, MGBLX1, MGBBX1,
MFELX1, MFEFX1 e MFEBX1 oltre ad ulteriori marchi di moduli miniGBIC.
29
LED
LED del sistema (verde). Si illumina quando lo switch acceso e
lampeggia durante il riavvio, l'esecuzione di autotest e l'acquisizione di un
indirizzo IP. Se il LED di color ambra e lampeggia significa che lo switch
ha rilevato un errore dell'hardware.
LED di collegamento/attivit (verde). Posizionato sulla sinistra della porta.
Si illumina quando viene rilevato un collegamento tra la porta
corrispondente e un altro dispositivo. Lampeggia quando la porta sta
facendo passare il traffico.
NOTA Il sistema e i LED di collegamento/attivit si trovano su tutti i
modelli dello switch. I seguenti LED si trovano solo sui modelli di switch
che presentano queste funzionalit:
PoE (se presente) (ambra). Posizionato sulla destra della porta. Si illumina
per indicare che l'alimentazione viene fornita a un dispositivo associato alla
porta corrispondente.
LED 100M (se presente) (verde). Posizionato sulla destra della porta. Si
illumina quando un altro dispositivo connesso alla porta, quando
acceso e quando viene stabilito un collegamento a 100 Mbps tra i
dispositivi. Il LED spento indica che la velocit di connessione inferiore ai
100 Mbps o che niente collegato alla porta.
LED Gigabit (se presente) (verde). Posizionato sulla destra della porta. Si
illumina quando un altro dispositivo connesso alla porta, quando
acceso e quando viene stabilito un collegamento a 1000 Mbps tra i
dispositivi. Il LED spento indica che la velocit di connessione inferiore ai
1000 Mbps o che niente collegato alla porta.
Mini-GBIC (se presente) (verde). Posizionato sulla destra della porta. Si
illumina quando viene effettuata una connessione tramite la porta RJ-45
condivisa. Lampeggia quando la porta sta facendo passare il traffico.
Funzionalit aggiuntive
Lo switch pu anche presentare un pulsante di reimpostazione. Lo switch
pu essere reimpostato inserendo uno spillo o una graffetta nell'apertura
di reimpostazione. Vedere Come ripristinare le impostazioni predefinite
del dispositivo per maggiori dettagli.
30
Pannello posteriore
La porta di alimentazione posizionata sul pannello posteriore dello smart
switch.
31
Risorse aggiuntive
Supporto
Cisco Small Business Support
Community
www.cisco.com/go/smallbizsupport
www.cisco.com/go/smallbizhelp
www.cisco.com/en/US/support/tsd_cisco_
small_business_support_center_contacts.html
www.cisco.com/go/smallbizfirmware
Selezionare un collegamento per scaricare il
firmware relativo ai prodotti Cisco Small
Business. Non sono necessari dati di accesso.
I download per tutti gli altri prodotti Cisco
Small Business, inclusi i sistemi di
memorizzazione di rete, sono disponibili
nell'area Download su Cisco.com al sito
www.cisco.com/go/software (richiede la
registrazione/immissione di dati di accesso).
Documentazione prodotti
Smart Switch di Cisco Small
Business
www.cisco.com/go/smallbizsmartswitches
www.cisco.com/en/US/docs/switches/lan/
csbss/sf20x_sg20x/quick_start/78-1950101.pdf
www.cisco.com/en/US/docs/switches/lan/
csbss/sf20x_sg20x/administration_guide/OL22849-01.pdf
www.cisco.com/en/US/docs/switches/lan/
csbms/sfe2000/release/notes/
Class_A_Switches_RCSI.pdf
www.cisco.com/go/warranty
www.cisco.com/web/partners/sell/smb
www.cisco.com/smb
32
Cisco, Cisco Systems, il logo Cisco e il logo Cisco Systems sono marchi o marchi registrati di
Cisco e/o di societ affiliate negli Stati Uniti e in altri paesi. Tutti gli altri marchi citati nel
presente documento o sito Web appartengono ai rispettivi proprietari. L'uso del termine
partner non implica una relazione di partnership tra Cisco e altre societ. (1002R)
2010 Cisco Systems, Inc. Tutti i diritti riservati.
Kurzanleitung
Willkommen
Vielen Dank, dass Sie sich fr den Cisco Serie 200 Smart Switch, ein
Netzwerkkommunikationsgert von Cisco Small Business, entschieden
haben. Dieses Gert ist vorkonfiguriert und sofort als Standard-Bridge
einsatzbereit. In der Standardkonfiguration bertrgt das Gert nach dem
Einschalten Pakete zwischen den angeschlossenen Gerten.
Lieferumfang
Cisco SF 200-24, SF 200-24P, SF 200-48, SF 200-48P, SG 200-18, SG
200-26, SG 200-26P, SG 200-50 oder SG 200-50P Smart Switch.
Rackinstallations-Kit
Netzkabel
diese Kurzanleitung
Produkt-CD
In dieser Anleitung wird der Aufbau des Smart Switch beschrieben und
wie das Gert im Netzwerk bereitgestellt wird. Weitere Informationen
finden Sie unter www.cisco.com/smb.
Der Switch kann auf zweierlei Weise aufgestellt bzw. montiert werden:
Aufstellen des Switch auf einer flachen Oberflche
Montage des Switch in einem Standard-Rack (1 Einheit hoch)
Stellen Sie das Gert nicht an einem Ort auf, an dem eine der folgenden
Bedingungen vorherrscht:
Hohe Umgebungstemperatur Die Umgebungstemperatur darf 40 C
nicht berschreiten.
Verringerte Luftzirkulation Auf beiden Seiten des Gertes muss
freier Raum bleiben, damit eine berhitzung vermieden wird.
Mechanische berlastung Das Gert muss eben, stabil und sicher
aufgestellt werden, damit es nicht verrutscht oder sich bewegt.
berlastung des Stromkreises Das Anschlieen des Gerts an die
Steckdose darf diesen Stromkreis nicht berlasten.
Serie 200 Smart Switches
35
Rackinstallation
Wenn der Switch in einem Rack installiert werden kann, wird er mit einem
Rackinstallations-Kit geliefert. Um den Switch in einem Standardrack zu
installieren, befestigen Sie die Rack-Montageklammern mit dem
beiliegenden Befestigungsmaterial an den Seiten des Switch und ziehen
Sie die Klammern fest an.
Achtung
36
Ports
1 - 6 und 13 - 18
1 - 12 und 25 - 36
Leistung fr PoE
100 Watt
180 Watt
100 Watt
180 Watt
Vorbereitung
Vergewissern Sie sich, dass Sie ber einen Computer mit Microsoft
Internet Explorer (Version 6 oder hher) oder Firefox (Version 2.0 oder
hher) verfgen.
37
mittels Ethernet-Kabel eine direkte Verbindung zu demselben IPSubnetz herstellen, in dem sich der Switch befindet, oder Sie
knnen eine Verbindung zu dem LAN, in dem sich der Switch
befindet, ber andere Switches einrichten. Sie knnen Ihren
Computer auch aus einem anderen IP-Subnetz ber einen oder
mehrere IP-Router mit dem Switch verbinden.
Schritt 3 Fhren Sie die IP-Konfigurierung auf Ihrem Computer durch.
a.
b.
Erfolgt die Zuweisung der IP-Adressen durch einen DHCPServer, vergewissern Sie sich, dass dieser ausgefhrt wird
und vom Switch und vom Computer erreicht werden kann.
Mglicherweise ist es erforderlich, die Verbindung der
Gerte zu trennen und anschlieend wieder herzustellen,
damit die durch den DHCP-Server zugewiesenen neuen IPAdressen erkannt werden.
auf Ihrem Computer hngt von der jeweiligen Architektur und dem
verwendeten Betriebssystem ab. Um Informationen hierzu zu
erhalten, rufen Sie die Hilfe- und Support-Funktionen Ihres
Computers auf und suchen Sie nach dem Stichwort IPAdressierung.
Schritt 4 ffnen Sie ein Webbrowser-Fenster. Wenn Sie zur Installation
38
Schritt 5 Geben Sie die IP-Adresse des Switch in die Adresszeile ein, und
Achtung
Das Fenster Erste Schritte wird angezeigt. Sie knnen den Switch jetzt
konfigurieren. Weitere Informationen finden Sie im Administratorhandbuch
fr den Cisco Small Business Smart Switch.
39
Wenn Sie den Switch nicht erreichen knnen, erhalten Sie eine
Antwort, die der Folgenden hnlich ist:
Pinging 192.168.1.254 with 32 bytes of data:
Request timed out.
Mgliche Ursachen und Abhilfemanahmen
Kein Netzstrom:
Schalten Sie den Switch und den Computer ein, wenn sie
ausgeschaltet sind.
Fehlerhafte Ethernet-Verbindung:
berprfen Sie die Funktionsanzeige der LEDs. berprfen Sie die
Anschlsse des Ethernet-Kabels, und vergewissern Sie sich, dass
diese fest mit dem Switch und dem Computer verbunden sind.
Falsche oder widersprchliche IP-Adresse:
Stellen Sie sicher, dass Sie die richtige IP-Adresse fr den Switch
verwenden. Die aktuelle IP-Adresse des Switch erfahren Sie von Ihrem
Netzwerkadministrator. Die System-LED zeigt an, woher der Switch die
IP-Adresse erhalten hat. Genaue Informationen hierzu finden Sie in
Abschnitt 4.
Vergewissern Sie sich, dass die IP-Adresse des Switch nicht auch fr
ein anderes Gert verwendet wird.
Keine IP-Route:
Wenn der Switch und Ihr Computer sich in unterschiedlichen IPSubnetzen befinden, bentigen Sie einen oder mehrere Router, um die
Pakete zwischen den beiden Subnetzen zu bertragen.
Ungewhnlich lange Zugriffszeit:
Aufgrund der Tree Loop Detection Logic dauert es 30 bis 60
Sekunden, bis neu hinzugefgte Verbindungen an den entsprechenden
Schnittstellen und/oder im LAN betriebsbereit sind.
In diesem Abschnitt wird das Gehuse des Smart Switch mit Ports, LEDs
und Anschlssen beschrieben. Nicht alle Modelle sind mit allen
beschriebenen Funktionen ausgestattet.
40
Ports
RJ-45-Ethernet-Ports ber diese Ports knnen Sie Netzwerkgerte wie
Computer, Drucker und Access Points an den Switch anschlieen.
MiniGBIC (sofern vorhanden) Die MiniGBIC-Ports (GBIC, Gigabit Interface
Converter) sind Anschlusspunkte fr MiniGBIC-Module, sodass zwischen
dem Smart Switch und anderen Switches eine Uplink-Verbindung ber
einen Lichtwellenleiter hergestellt werden kann.
MiniGBIC-Ports sind kompatibel mit den MiniGBIC-Modulen MGBSX1,
MGBLH1, MGBLX1, MGBBX1, MFELX1, MFEFX1 und MFEBX1 von Cisco
sowie mit MiniGBIC-Modulen anderer Hersteller.
Die MiniGBIC-Schnittstelle ist ein Mehrfach-Port, der mit einer anderen
RJ-45-Schnittstelle geteilt wird. Wenn der MiniGBIC aktiv ist, ist der
benachbarte RJ-45-Port deaktiviert.
Als Reaktion auf Datenverkehr an der miniGBIC-Schnittstelle blinken die
LEDs des entsprechenden RJ-45-Ports grn.
LEDs
System-LED (Grn) Leuchtet stndig, wenn der Switch eingeschaltet ist.
Sie blinkt whrend des Boot-Vorgangs, beim Durchfhren von Selbsttests
und beim Erhalt einer IP-Adresse. Wenn die LED bernsteinfarben blinkt,
wurde durch den Switch ein Hardwarefehler festgestellt.
LINK/ACT-LED (Grn) Befindet sich auf der linken Seite des Ports. Sie
leuchtet stndig, wenn eine Verbindung zwischen dem entsprechenden
Port und einem anderen Gert erkannt wird. Sie blinkt, wenn der Port
Daten weiterleitet.
Hinweis Die System-LED und die LINK/ACT-LED sind bei allen Switch-
41
zwischen den Gerten besteht. Wenn die LED nicht leuchtet, liegt die
Verbindungsgeschwindigkeit unter 1000 MBit/s, oder an den Port ist kein
Gert angeschlossen.
MiniGBIC (sofern vorhanden) (Grn) Auf der rechten Seite des Ports.
Diese LED leuchtet kontinuierlich, wenn eine Verbindung ber den
gemeinsam verwendeten RJ-45-Port erfolgt. Sie blinkt, wenn der Port
Daten weiterleitet.
Weitere Funktionen
Der Switch ist u. U. auch mit einer Reset-Taste ausgestattet. Der Switch
kann zurckgesetzt werden, indem eine Nadel oder eine Broklammer in
die Reset-ffnung eingefhrt wird. Weitere Informationen finden Sie unter
Wiederherstellen der werkseitigen Standardeinstellungen des
Gerts.
Rckseite
Der Netzanschluss befindet sich auf der Rckseite des Smart Switch.
42
Weitere Informationen
Support
Cisco Small Business Support
Community
www.cisco.com/go/smallbizsupport
www.cisco.com/go/smallbizhelp
Telefonischer Kundensupport
www.cisco.com/en/US/support/tsd_cisco_
small_business_support_center_contacts.html
www.cisco.com/go/smallbizsmartswitches
www.cisco.com/en/US/docs/switches/lan/
csbss/sf20x_sg20x/quick_start/78-1950101.pdf
www.cisco.com/en/US/docs/switches/lan/
csbss/sf20x_sg20x/administration_guide/OL22849-01.pdf
www.cisco.com/en/US/docs/switches/lan/
csbms/sfe2000/release/notes/
Class_A_Switches_RCSI.pdf
Garantieinformationen
www.cisco.com/go/warranty
www.cisco.com/web/partners/sell/smb
www.cisco.com/smb
43
Bienvenue
Merci davoir choisi le commutateur intelligent Cisco 200, appareil de
communication en rseau de Cisco Small Business. Cet appareil est conu
pour tre directement oprationnel en tant que pont standard. Dans sa
configuration par dfaut, il transfre des paquets entre des appareils
connects aprs sa mise sous tension.
Contenu de la bote
Commutateur intelligent Cisco SF 200-24, SF 200-24P, SF 200-48, SF 20048P, SG 200-18, SG 200-26, SG 200-26P, SG 200-50 ou SG 200-50P
Kit de montage en rack
Cble dalimentation
Ce guide de dmarrage rapide
CD-ROM dinstallation
Ce guide a pour objectif de vous aider vous familiariser avec la
disposition du commutateur intelligent et dcrit galement le dploiement
de lappareil sur votre rseau. Pour plus dinformations, consultez le site
www.cisco.com/smb.
Montage en rack
Si votre commutateur peut tre mont dans une armoire rack, il est livr
avec un kit de montage en rack. Pour monter le commutateur en rack dans
une armoire rack standard, fixez les supports de montage aux cts du
commutateur laide du matriel fourni et veillez bien les serrer.
ATTENTION ! Pour garantir une bonne stabilit, chargez larmoire rack en
47
Ports
1 6 et 13 18
1 12 et 25 36
Configuration du Commutateur
intelligent Cisco Small Business
Avant de commencer
Veillez disposer dun ordinateur dot de Microsoft Internet Explorer
(version 6 ou ultrieure) ou de Firefox (version 2.0 ou ultrieure).
48
a.
49
Fonctionnalits du Commutateur
intelligent Cisco Small Business
Ports
Ports Ethernet RJ-45 : ces ports permettent de relier au commutateur des
appareils rseau, tels que des ordinateurs, imprimantes et points daccs.
Ports MiniGBIC (si disponible) : les ports MiniGBIC (GigaBit Interface
Converter) reprsentent les points de connexion pour les modules
MiniGBIC. Le commutateur intelligent peut ainsi tablir une liaison
montante vers dautres commutateurs via une fibre optique.
Les ports MiniGBIC sont compatibles avec les modules MiniGBIC Cisco
MGBSX1, MGBLH1, MGBLX1, MGBBX1, MFELX1, MFEFX1 et MFEBX1,
ainsi quavec des modules MiniGBIC dautres marques.
Linterface MiniGBIC est un port de combinaison, partag avec une
autre interface RJ-45. Lorsque le port MiniGBIC est actif, le port RJ-45
adjacent est dsactiv.
Les LED du port RJ-45 correspondant clignotent en vert en raction au
trafic de linterface MiniGBIC.
Commutateurs intelligents srie 200
51
LED
LED systme : (verte) reste allume lorsque le commutateur est sous
tension et clignote lors du dmarrage, de lexcution de tests automatiques
et de lobtention dune adresse IP. Si la LED clignote en orange, le
commutateur a dtect une dfaillance matrielle.
LED de liaison/daction : (verte) situe sur la gauche du port. Reste allume
lorsquune liaison est dtecte entre le port correspondant et un autre
appareil. Clignote lorsque le trafic passe par ce port.
REMARQUE Les LED systme et de liaison/daction sont prsentes sur
chaque modle du commutateur. Les LED suivantes ne sont prsentes
que sur les modles de commutateur dots des capacits
correspondantes :
PoE (si disponible) : (orange) situe sur la droite du port. Reste allume
pour indiquer quun appareil reli au port correspondant est aliment.
LED 100M (si disponible) : (verte) situe sur la droite du port. Reste allume
lorsquun autre appareil est connect au port, est sous tension et quune
liaison de 100 Mbits/s est tablie entre les appareils. Lorsque cette LED
est teinte, la vitesse de connexion est infrieure 100 Mbits/s ou aucun
appareil nest reli ce port.
LED Gigabit (si disponible) : (verte) situe sur la droite du port. Reste
allume lorsquun autre appareil est connect au port, est sous tension et
quune liaison de 1 000 Mbits/s est tablie entre les appareils. Lorsque
cette LED est teinte, la vitesse de connexion est infrieure 1 000 Mbits/
s ou aucun appareil nest reli ce port.
MiniGBIC (si disponible) : (verte) situe sur la droite du port. Reste allume
lorsquune connexion est tablie via le port RJ-45 partag. Clignote
lorsque le trafic passe par ce port.
Caractristiques supplmentaires
Le commutateur peut galement tre dot dun bouton de rinitialisation.
Vous pouvez rinitialiser le commutateur en insrant une pingle ou un
trombone dans louverture prvue cet effet. Pour plus de dtails, voir
Restauration de la configuration dorigine de lappareil .
Panneau arrire
Le port dalimentation est situ sur le panneau arrire du commutateur
intelligent.
52
Restauration de la configuration
dorigine de lappareil
53
Assistance
Communaut dassistance
Cisco Small Business
www.cisco.com/go/smallbizsupport
www.cisco.com/go/smallbizhelp
Contacts assistance
tlphonique
www.cisco.com/en/US/support/tsd_cisco_
small_business_support_center_contacts.html
Tlchargement de
micrologiciels Cisco Small
Business
www.cisco.com/go/smallbizfirmware
Slectionnez un lien pour tlcharger le
micrologiciel dun produit Cisco Small
Business. Aucune ouverture de session nest
requise.
Les tlchargements se rapportant tous les
autres produits Cisco Small Business,
notamment aux units de stockage rseau,
sont disponibles dans la zone de
tlchargement de Cisco.com, ladresse
www.cisco.com/go/software
(enregistrement/ouverture de session requis).
Documentation produit
Commutateurs intelligents
Cisco Small Business
www.cisco.com/go/smallbizsmartswitches
www.cisco.com/en/US/docs/switches/lan/
csbss/sf20x_sg20x/quick_start/78-1950101.pdf
www.cisco.com/en/US/docs/switches/lan/
csbss/sf20x_sg20x/administration_guide/OL22849-01.pdf
www.cisco.com/en/US/docs/switches/lan/
csbms/sfe2000/release/notes/
Class_A_Switches_RCSI.pdf
Informations relatives la
garantie
www.cisco.com/go/warranty
www.cisco.com/web/partners/sell/smb
www.cisco.com/smb
54
55
Sige en Amrique
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
tats-Unis
http://www.cisco.com
Assistance Petites et moyennes entreprises - tats-Unis :
1-866-606-1866 (Appel gratuit, 24x7)
Assistance Petites et moyennes entreprises - Numros linternational
Cisco, Cisco Systems et les logos Cisco et Cisco Systems sont des marques commerciales ou
dposes de Cisco et/ou de ses succursales aux tats-Unis et dans d'autres pays. Toutes les
autres marques commerciales mentionnes dans ce document ou sur ce site Web
appartiennent leurs propritaires respectifs. Lutilisation du mot partenaire nimplique pas de
relation de partenariat entre Cisco et une autre socit. (1002R)
2010 Cisco Systems, Inc. Tous droits rservs.
78-19596-01