Académique Documents
Professionnel Documents
Culture Documents
DESIGN REPORT
1.1
INDEX
1.0
1.1
1.2
2.0
ii.
iii.
iv.
v.
vi.
3.0
LOADS
3.1
Dead Loads
Unreinforced Concrete
Light Weight Concrete
Reinforced Concrete
Block Work
Brickwork
Flooring (Finishes)
Hanging Loads
Partitions
3.2
Live Loads
Accessible roof
Inaccessible roof
Offices
Equipment Load
3.3
22.6 kN/m3
15.0 kN/m3
24.0 kN/m3
15.0 kN/m3
21.6 kN/m3
2.00 kN/m2
0.75 kN/m2
As per actual (min. 1 kN/m2)
1.50 kN/m2
1.00 kN/m2
2.4
kN/ m2
As per actual
Wind Loads
Wind loads will be calculated as per UBC97 using following formula.
Wind speed = 140 km/hr
p
Ce
Cq
qs
I
3.4
=
=
=
=
=
Seismic Loads
3.5
Load Combinations
3.5.1
3.5.2
1. U =
1.4D
2.
3.
4.
= Dead load
= Live load
= Earthquake load
4.0
4.1
Concrete
Concrete work will conform to ACI 318-08.
All concrete will be hard rock and will have the following minimum compressive
cylinder strength at 28 days:
i.
i.
4.2
35 MPa
Unreinforced concrete
21 MPa
Reinforcing Steel
i.
ii.
4.3
Structural Steel
Structural Steel Work if any shall be in accordance with AISC specifications.
5.0
COMPUTER SOFTWARE
i.
ETABS Software
ii.
6.0
STRUCTURE
6.1
Design Procedure:
6.2
The building will be reinforced concrete beam column frame. Solid slab
system will be provided depending upon the spans configuration. The
primary material for structural construction of the building is reinforced
concrete.
The grade beams and grade slabs will be provided at the ground level for
distribution of loads to the foundations and natural ground respectively.
The self weight of one way and two way slabs and all other structural
elements will be calculated automatically by the program in the case (DL)
with self weight multiplier equal to 1.