Académique Documents
Professionnel Documents
Culture Documents
function
Expanfo is an innovative ANFO (Ammonium Nitrate Fuel Oil) product where, in addition to natural porosity, sensitising plastic
microspheres are included in-situ into each Ammonium Nitrate Prill.
Note:
The microballoons remain intact and entrained in the ANFO (Ammonium Nitrate Fuel Oil) during pneumatic loading, thereby enhancing
detonation sensitivity in the blast hole. This results in a more ideal detonation behaviour and superior field performance compared to that
achieved with equal volumes of standard market ANFO products.
description
Expanfo gives superior hanging-wall control and generally more consistent and predictable blast results, especially in tough blasting
conditions or when the product is initiated without a primer. Expanfo is available in 2 grades varying in product strength and detonation
characteristics to provide the customer with a choice for achieving the highest value solution for the specific application.
advantages
safety Expanfo, due to its low sensitivity to shock, friction or impact, is comparatively safe to handle.
Misfires are easily treated by washing the charge hole with water, rendering the Expanfo insensitive.
reliability Anti-caking agents make Expanfo free-flowing for improved performance in underground or surface
applications. Expanfo will reliably initiate with a 6D+ detonator when loaded pneumatically.
quality Manufacturing of this product conforms to the ISO9002 quality standard. Tests are conducted to
confirm that the density, prill size, moisture content, anti-caking properties and fuel content conform
to specifications.
custom packaging
product information
expanfoTM200
A medium density of Expanfo 200, (when compared to standard ANFO) is a general purpose ANFO product for hard rock stoping
applications, bord & pillar and easier development conditions. Expanfo 200 is ideal to limit over-break or excessive fines.
expanfoTM300
Expanfo 300 is a higher density ANFO product for tough development conditions or any applications where higher energy is required.
Expanfo 200
Expanfo 300
0.68 0.74
0.73 0.80
0.85 0.95
0.90 1.05
Water resistance
No
Fuel content %
5.7
Initiation
6D detonator minimum
High fuel absorption with accurate and even fuel blending optimises performance.
Sensitivity is enhanced by microspheres to provide a reliable and effective
explosive.
100
116
100
116
110
103 @ 0.72
105 @ 0.78
The theoretical energy for ideal detonation is essentially the same for all ANFO
Operating temperature
-10C to 60C
Health/ environment
The mass per bag differs depending on Expanfo grade. However the volume per bag (and thus quantity blast) will remain the
same.
** Energies calculated using the Tiger code (JCZ3). (Should not be compared with energies evaluated using other methods).
important instructions
Keep ANFO away from sparks, flames or any other source of ignition.
ANFO is soluble in water and can therefore not be used in wet conditions.
packaging information
Please contact your representative.
standard packaging
Expanfo 200
Expanfo 300
Multi bag: 25
( 4 X 5.88kg bags)
( 4 X 6.25kg bags)
Single bag: 25
(1 X 23.5)
(1 X 25)
Tamping:
Tamping:
* The mass per bag differs depending on Expanfo grade. However the volume per bag (and thus quantity blast) will remain the same.
Expanfo 200
Expanfo 300
Blue
Red
Each bag is marked with an identifier that identifies the product according to grade, date of manufacture, batch number and bag number.
Recommended storage
Shelf life
Transport:
UN classification
1.5D
UN number
0082
Zax number
349
Sasol Nitro
www.sasol.com
Rev 3
May 2014