A low-carbon steel plate is 300 mm wide and 25 mm thick.
It is reduced in one pass in a
two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA lowcarbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA lowcarbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentA low-carbon steel plate is 300 mm wide and 25 mm thick. It is reduced in one pass in a two-high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponentvvvvvv