Académique Documents
Professionnel Documents
Culture Documents
Please visit our DHV website: www.dhvindustries.com or www.dhvvalve.com for a copy of our API 6D
monogram certificate. Customer and Project referrals are available upon request. For certified data
and current specifications, please contact us or your local DHV agent. Information provided in this
catalog is for general purposes only.
DHV reserves the right to discontinue the manufacture or change and modify our design and construction of any DHV product, in due course of our manufacturing procedure without incurring any
obligation to accept for credit, to replace or furnish or install such changes or modifcations on
products previously or subsequently sold.
E-mail: sales@dhvindustries.com
Website: www.dhvindustries.com
DHV Industries,Inc.
3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A.
Call TollFree: (887) DHV-USA1
Phone: (661) 392-8948 Fax: (661) 392-8947
E-mail: sales@dhvindustries.com
Website: www.dhvindustries.com
Wellhead Valves
.........................................................................................................
...................................................................................................................
..................................................................................
......................................................................................................................... 13
......................................................................... 14
Code
C = Cast Steel Valves
F = Forged Steel Valves
I = Cast Iron Valves
B = Ball Valves
W = Wellhead Valves
WB = Wafer Butterfly Valves
AA
A = AA
B = BB
C = CC
D = DD
E = EE
F = FF
H = HH
Alloy Steel
BB
ANSI 4130/4140
Alloy Steel
CC
Alloy Steel
Nitrided
ANSI 4130/4140
Stainless
Stainless
630SS
17-4PH
Alloy Steel
ASTM A487-4C
Alloy Steel
NACE
Impact Tested
NACE
4130/4140
4130/4140
MR01-75
ANSI 4130/4140
MR01-75
Nitrided
Nitrided
NACE
ASTM A487-4C
Stainless
17-4PH,
MR01-75
ANSI 4130/4140
NACE
630SS
EE
MR01-75
CA6NM, F6NM
Full
17-4PH,
ASTM A217-CA15
Stainless
630SS
Temperature
Classification
Tomperatare Rating
1 = PSL1
2 = PSL2
3 = PSL3
4 = PSL4
K, L, P, R, S, T, U, V
End Connection
F = RF (B16.5)
J = RTJ (API 6A)
R = RTJ (B16.5)
T = Threaded End
U = Union
W = Welded End
X = Special
CS
Gas, Oil
General Moderately
410, F6NM
SS
Corrosive CO2
SS
17-4PH
4130/4140
410SS,
410SS,
630SS,
630SS,
17-4PH
17-4PH
410SS,
410SS,
630SS,
630SS,
17-4PH,
17-4PH,
General Highly
Corrosive CO2
Low Temperature Sour Gas and Oil
CS
SS
and Oil
Highly Corrosive
SS
K
L
P
R
S
T
U
V
Temperature Ratings
O
Min
Max
- 75
180
- 50
180
- 20
180
Room Temperature
0
180
0
250
0
250
35
250
Min
Max
- 60
82
- 46
82
- 29
82
Room Temperature
- 18
66
- 18
82
- 18
121
2
121
Material Requirements
Material
Class
Service
AA
BB
CC
DD
EE
FF
HH
General
General
General
Sour a
Sour a
Sour a
Sour a
General Oilfield
4130/4140
Temperature Ratings
5000psi, DD Body
Seat
Full
Stainless
Pressure Class
01
410, F6NM
630SS
ASTM A217-CA15
Stainless
Alloy Steel
FF
Nitrided
17-4PH,
17-4PH,
1 = PR1
2 = PR2
4130/4140
Full
DD
PR-1,U Temperature
4130/4140
CA6NM, F6NM
Rating,Threaded End
02 = 2000psi
03 = 3000psi
05 = 5000psi
10 = 10000psi
20 = 20000psi
51 = 150LB
53 = 300LB
56 = 600LB
58 = 800LB
59 = 900LB
65 = 1500LB
75 = 2500LB
ASTM A487-4C
Body Material
Type
Stem
Seal
ASTM A487-4C
.................................................................................................. 11
.................................................................................................................... 12
Type
Service
Bonnet
API 60K,75K
6
8
Trim Material
Material
Type
........................................................................................................ 4
...................................................................................................................................
Check Valve
................................................................................................................... 2
14
Check Valve
Features:
Check valve flows in single direction.
Check valve may be furnished in the following types:
Regular swing check
Full opening swing check
Lift check, reduced opening
It is usually used for kill manifold.
Features:
Specifications:
Basic Design and Test
Working Pressure (Psi)
Main Nominal Size (in)
Product Sepcification Level
Performance Requirement Level
Material Class
End Connection
Specifications:
API-6A
2000, 3000, 5000, 10000, 15000
2-1/16, 2-9/16, 3-1/16, 3-1/8, 4-1/16
PSL1, PSL2, PSL3, PSL4
PR1, PR2
AA, BB, CC, DD, EE, FF
Flanged, wafer, Treaded
Material Class
Working Temperature
Parts List
No Name
Parts List
Parts List
No
1
2
3
4
5
6
7
8
9
10
Name
GASKET
BONNET
NUT
BOLT
SPRING
DISC
BODY
SEAT
O-RING
SCREW
Material
No
1
2
3
4
5
6
7
8
9
10
11
12
13
AISI 4130
2HM
B7M
INCONEL X-750
AISI 4130
AISI 4130
AISI 4135+VITON
VITON-B
AISI 4130
Name
BOLT
COVER
GASKET
BOLT
NUT
HINGE
CLAPPER PIN
HINGE
DISC NUT
DISC WASHER
DISC
SEAT RING
BODY
Material
ASTM A193 B7M
ASTM A-487-4C
SPIRAL WOUND 316SS GRAPHITE
Material
STEM
AISI 4135
GLAND RING
COPPER
BOLT
NUT
BEARING
STEEL
DUST SEAL
PTFE
HANDWHEEL NUT
HANDWHEEL
CARBON STEEL
10 BEARING
STEEL
11 GREASE ZERK
STAINLESS STEEL
12 PACKING GLAND
13 BEARING HOUSING
AISI 1045
14 STEM PACKING
15 BONNET
AISI 4130
16 BONNET GASKET
17 STEM NUT
18 GATE
19 SEAT
20 BODY
AISI 4130
21 SEAT SPRING
INCONEL X-750
22 O-RING
VITON-B
13
02
Positive Choke
Body to bonnet contact behind the O-ring seal eliminates bonnet seal extrusion.
The bean of positive choke are made of ceramic or hard alloy steel. Both have the feature of abrasion resistance,
erosion resistance and reliable serviceability.
Flow bean chamfers are available from 2/64 to 64/64, in 1/64 increments for precise regulation of flow rate.
The choke bean may be dismantled quickly for change of beans.
Specifications:
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
Dimensions
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
L
in
mm
11.62
295
13.12
333
14.12
359
17.12
435
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
H
in
mm
17.75
451
20.06
510
22.00
559
25.00
635
2000Psi
W
in
mm
9.84
250
9.84
250
13.00
330
13.00
330
L
in
mm
14.62
359
16.62
422
17.12
435
20.12
511
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
H
in
mm
17.83
453
20.06
510
22.76
578
26.25
667
3000Psi
W
in
mm
13.00
330
13.00
330
13.00
330
15.75
400
NPS
2 1/16"
2 9/16"
3 1/16"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/16"
4 1/16"
03
L
in
mm
14.62
359
16.62
422
18.62
473
21.62
549
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
H
in
mm
17.83
453
20.06
510
23.35
593
26.38
670
5000Psi
W
in
mm
13.00
330
13.00
330
15.75
400
17.75
450
L
in
mm
20.50
521
22.25
565
24.38
619
26.38
670
D
in
mm
2.06
52.4
2.56
65.1
3.06
77.72
4.06
103.2
H
in
mm
28.38
721
34.63
879
25.55
649
41.56
1056
10000Psi
W
in
mm
15.75
400
17.75
450
17.75
450
19.68
500
L
in
mm
19.00
483
21.00
533
23.56
598
29.00
737
D
in
mm
2.06
52.4
2.56
65.1
3.06
77.72
4.06
103.2
H
in
mm
28.38
721
36.50
927
37.06
941
43.00
1092
15000Psi
W
in
mm
15.75
400
17.75
450
17.75
450
19.68
500
API-6A
2000, 3000, 5000, 10000, 15000, 20000
1-13/16, 2-1/16, 2-9/16, 3-1/16, 3-1/8, 4-1/16
PSL1, PSL2, PSL3, PSL4
PR1, PR2
AA, BB, CC, DD, EE, FF
Flanged, Thread, Flanged and Thread
Parts List
No
1
2
3
4
5
6
7
8
Name
O-RING
SEAT
BODY
DRAIN FITTING
WING NUT
O-RING
BONNET
Material
VITON-B
AISI 4135
AISI 4135
AISI 4140
AISI 4130
VITON-B
AISI 4135
GLAND RING
ALLOY STEEL
12
Features:
Specifications:
Basic Design and Test
Working Pressure
Main Nominal Size(in)
Product Specification Level
Performance Requirement Level
Material Class
End Connection
Specifications:
Basic Design and Test
Working Pressure (Psi)
Main Nominal Size
Product Specification Level
Performance Requirement Level
Material Class
Working Temperature
API-6A
ANSI
2000, 3000, 5000, 10000, 15000, 20000 (Psi) 400, 600, 900, 1500, 2500 (LB)
2-1/16, 2-9/16, 3-1/16, 3-1/8, 4-1/16
2, 2-1/2, 3, 4, 6, 8
PSL1, PSL2, PSL3, PSL4
PSL1, PSL2, PSL3, PSL4
PR1, PR2
PR1, PR2
AA, BB, CC, DD, EE, FF
AA, BB, CC, DD, EE, FF
Flanged, Thread, Flanged and Thread
Flanged, Weld
API-6A
2000, 3000, 5000
1-13/16, 2-1/16, 2-9/16, 3-1/16, 3-1/8, 4-1/16
PSL1, PSL2, PSL3, PSL4
PR1, PR2
AA, BB, CC, DD, EE, FF
-50 OF~250 OF (L~U)
Parts List
Parts List
No Name
Material
1
2
3
4
5
6
7
8
9
10
11
12
13
14
VITON-B
AISI 4135
AISI 4140
ASTM A182 F6a
VITON
ASTM A182 F6a
AISI 4130
AISI 4135
ASTM 47
CARBON STEEL
CARBON STEEL
AISI 4130
VITON-B
AISI 4130
O- RING
SEAT
DRAIN FITTING
MALE ADAPTER
V- PACKING
FEMALE ADAPTER
WING NUT
STEM
HANDWHEEL
INDICATOR
LUBRICATOR
BONNET
O- RING
BODY
No Name
Dimensions
NPS
600LB
900LB
1500LB
2500LB
2000PSI
3000PSI
5000PSI
L
in
mm
6.38
162
7.25
184
7.25
184
8.75
222
6.44
163.5
7.31
185.5
7.31
185.5
2``
H
in
mm
8.44
215
8.44
215
8.44
215
8.44
215
8.44
215
8.44
215
8.44
215
A
in
mm
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
L
in
mm
7
178
7.5
190.5
9.25
235
11.3
287
7.06
179.5
7.57
192
9.31
236.5
11
3``
H
in
mm
10.19
259
10.19
259
10.19
259
10.19
259
10.19
259
10.19
259
10.19
259
A
in
mm
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
L
in
mm
8.5
216
9
228.5
10.75
273
13.25
336.5
8.56
217.5
9.06
230
10.81
274.5
4``
H
in
mm
18.19
462
18.19
462
18.19
462
18.19
462
18.19
462
18.19
462
18.19
462
A
in
mm
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
L
in
mm
11
279.5
12
305
13.87
352
18
457
11.06
281
12.06
306.5
14
355.5
6``
H
in
mm
22
559
22
559
22
559
22
559
22
559
22
559
22
559
A
in
mm
17.72
450
23.62
600
23.62
600
23.62
600
17.72
450
23.62
600
23.62
600
Material
GREASE FITTING
AISI 4140
BODY
AISI 4130
GREASE FITTING
AISI 4140
NUT
BOLT
GREASE FITTING
STAINLESS STEEL
PACKING
TEFLON
BEARING
STEEL
GREASEI ZERK
STAINLESS STEEL
10
BEARING GLAND
AISI 1045
11
HANDWHEEL
12
PACKING GLAND
AISI 4130
13
BONNET
AISI 4130
14
STEM
AISI 4130
15
GATE
AISI 4130
16
BONNET GASKET
17
GATE SPRING
INCONEL X-750
18
SEAT RETAINER
AISI 4135
19
SEAT
TEFLON
04
2 1/16"
2 9/16"
3 1/8"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
L
in
mm
11.62
295
13.12
333
14.12
359
17.12
435
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
E
in
mm
4.81
122
5.63
143
6.94
176
8.63
219
H
in
mm
19.25
489
20.19
513
22.50
572
25.94
659
2000Psi
W
in
mm
11.00
280
13.00
330
13.00
330
16.00
406
L
in
mm
14.62
359
16.62
422
17.12
435
20.12
511
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
E
in
mm
5.06
129
5.94
151
7.31
186
9.06
230
H
in
mm
19.44
494
20.44
519
22.75
578
26.38
670
3000Psi
W
in
mm
13.00
330
16.00
406
16.00
406
20.00
508
L
in
mm
14.62
359
16.62
422
18.62
473
21.62
549
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
E
in
mm
5.06
129
5.94
151
7.31
186
9.06
230
H
in
mm
19.44
494
20.44
519
22.75
578
26.38
670
5000Psi
W
in
mm
13.00
330
16.00
406
16.00
406
20.00
508
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
05
L
in
mm
9.63
244
10.25
260
11.38
289
13.00
330
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
E
in
mm
4.81
122
5.63
143
6.94
176
8.63
219
H
in
mm
19.25
489
20.19
513
22.50
572
25.94
659
2000Psi
W
in
mm
11.00
280
13.00
330
13.00
1330
16.00
406
L
in
mm
9.63
244
10.25
260
11.38
289
13.00
330
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
E
in
mm
5.06
129
5.94
151
7.31
186
9.06
230
H
in
mm
19.44
494
20.44
519
22.75
578
26.38
670
3000Psi
W
in
mm
13.00
330
16.00
406
16.00
406
20.00
508
L
in
mm
9.63
244
10.25
260
11.38
289
13.00
330
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
E
in
mm
5.06
129
5.94
151
7.31
186
9.06
230
H
in
mm
19.44
494
20.44
519
22.75
578
26.38
670
5000Psi
W
in
mm
13.00
330
16.00
406
16.00
406
20.00
508
Equivalent
Orifice DIA.
(Bean Size)
Orifice Area (in2)
Cv* Values
2FB
3RB
3FB
4RB
4FB
6RB
6FB
8RB
Equivalent
Orifice DIA.
(Bean Size)
Orifice Area (in2)
Cv* Values
2FB
3RB
3FB
4RB
4FB
6RB
6FB
8RB
20
32
48
64
80
96
112
128
144
160
0.077
1.4
0.196
3.7
0.442
8.3
0.785
14.8
1.227
23.2
1.767
33.3
2.405
45.4
3.142
59.3
3.976
75.0
4.909
92.6
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
256
272
288
304
15.90
318
17.72
354
176
192
208
224
240
5.940
112.1
7.069
141
8.296
166
9.621
192
11.0447
221
*
*
*
*
12.57 14.1863
251
284
*CV values listed above are the approximation for each bean size and may vary for different valve configurations.
Flow,%
NPS
Valve Lift,%
Trim Configuration
The three basic types of flow characteristics are quick opening, linear, and equal percentage.
Controllability of a valve throughout its range is maximized with equal percent trim. This trim meets the precise
control requirements at low set points, yet still offers overall flow capacity.
The linear configuration provides good control in the upper range but suffers from poor control in the lower region.
Quick opening trim is only suitable for use at the upper end of its travel.
10
NPS
2"
NPS
150LB
300LB
600LB
900LB
1500LB
2500LB
2000PSI
3000PSI
5000PSI
L
in
mm
7.00
178
7.25
184
7.63
194
8.75
222
8.75
222
10.00
254
7.63
194
8.75
222
8.75
222
NPS
150LB
300LB
600LB
900LB
1500LB
2500LB
2000PSI
3000PSI
5000PSI
RP
2"
3"x2"
3"
4"x3"
4"
6"x4"
6"
8"x6"
3"
A
in
mm
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
L
in
mm
7.25
184
7.63
194
8.25
210
8.75
222
9.5
242
11.38
289
8.25
210
8.75
222
9.5
242
A
in
mm
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
L
in
mm
8.25
210
8.75
222
9.5
242
10.00
254
10.38
264
13.00
330
9.5
242
10.00
254
10.38
264
3"x2"
L
in
mm
7.25
184
7.63
194
8.25
210
8.75
222
9.5
242
11.38
289
8.25
210
8.75
222
9.5
242
FP
Close
in / mm
12.80
325
15
381
19.61
498
24.5
622
4"
A
in
mm
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
L
in
mm
8.25
210
8.75
222
9.51
242
10.00
254
10.38
264
13.00
330
9.5
242
10.00
254
10.38
264
A
in
mm
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
L
in
mm
10.00
254
10.38
264
11.38
289
12.25
311
13.50
343
17.48
444
11.38
289
12.25
311
13.50
343
4"x3"
6"
A
in
mm
13.78
350
13.78
350
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
L
in
mm
10.00
254
10.38
264
11.38
289
12.25
311
13.50
343
17.48
444
11.38
289
12.25
311
13.50
343
A
in
mm
13.78
350
13.78
350
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
L
in
mm
15.0
381
15.38
391
16.5
419
17.52
448
19.62
498
23.75
603
16.5
419
17.52
448
19.62
498
6"x4"
09
Features:
Open
in / mm
13.82
351
16.57
421
21.06
535
27.48
698
A
in
mm
17.72
450
17.72
450
17.72
450
23.62
600
23.62
600
23.62
600
17.72
450
23.62
600
23.62
600
The unique design of the mud gate valve seat assures tight shut-off after exposure to the most rigorous field
conditions.
Rising stems are driven by means of a double acting thread for fast operation with low turning effort.
Both stem and stem screw are permanently lubricated and sealed with the aid of an O-ring between the stem
and screw housing.The stem seal assembly assures sealing under both low and high pressure.
Specifications:
Basic Design and Test
Working Pressure
Main Nominal Size (in)
Product Specification Level
Performance Requirement Level
Material Class
End Connection
API-6A
2000, 3000, 5000 (Psi)
2-1/16, 2-9/16, 3-1/8, 4-1/16
PSL1, PSL2, PSL3, PSL4
PR1, PR2
AA, BB, CC, DD, EE, FF
Flanged, Thread, Union
Parts List
8"x6"
A
in
mm
17.72
450
17.72
450
17.72
450
23.62
600
23.62
600
23.62
600
17.72
450
23.62
600
23.62
600
ANSI
400, 600, 900, 1500 (LB)
2, 2-1/2, 3, 4
PSL1, PSL2, PSL3, PSL4
PR1, PR2
AA, BB, CC, DD, EE, FF
Flanged, Thread, Union
No
Name
Material
BODY
AISI 4130
BONNET SEAL
VITON-B
BONNET
AISI 4130
NUT
BOLT
PACKING RING
STAINLESS STEEL
O-RING
BUNA-N
SCREW HOUSING
O-RING
BUNA-N
10
HANDWHEEL
CARBON STEEL
11
NUT
AISI 1045+ZN
12
BOLT
13
NUT
14
GLAND
STAINLESS STEEL
15
PACKING
BUNA-N
16
STEM
AISI 4130+NITRIDED
17
INJECTION FITTING
STAINLESS STEEL
18
GATE
AISI 4130+NITRIDED
19
SEAT
AISI 4140+BUNA-N
06
Dimensions
Both sleeves in the external sliding sleeve and seat nozzle are made of solid Tungsten Carbide, which are
abrasion and erosion resistance.
With the pressure-balancing bores in the external sliding sleeve, the stem will face the minimum load from
downstream pressure.
With bean size indicator on the stem, the throttle bore can be observed.
The stem will be locked when tighten to the wing nut position so as to assure the selected flow rate maintained.
Specifications:
ANSI Type Dimension
Class 400
NPS
2"
2 1/2"
3"
2000Psi
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
Flanged
(RTJ) L
in
mm
11.61
295
13.11
333
14.13
359
17.13
435
Threaded
L
in
mm
9.02
229
9.76
248
10.98
279
12.99
330
Flanged
(RTJ) L
in
mm
14.62
359
16.62
422
17.12
435
20.12
511
Threaded
L
in
mm
9.02
229
9.76
248
10.98
279
12.99
330
Flanged
(RTJ) L
in
mm
14.62
359
16.62
422
18.62
473
21.62
549
Threaded
L
in
mm
9.02
229
9.76
248
10.98
279
16.93
3430
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
Open
H
in
mm
14.57
370
18.90
480
20.08
510
22.83
580
Open
H
in
mm
14.57
370
18.90
480
20.08
510
28.35
720
Open
H
in
mm
14.57
370
18.90
480
20.08
510
29.92
760
4"
W
in
mm
14.02
356
17.72
450
17.72
450
17.72
450
3000Psi
NPS
2"
2 1/2"
3"
4"
W
in
mm
14.02
356
17.72
450
17.72
450
17.72
450
5000Psi
NPS
2"
2 1/2"
3"
4"
W
in
mm
14.02
356
17.72
450
17.72
450
17.72
450
NPS
2"
3"
4"
07
Flanged
(RTJ) L
in
mm
11.5
292
13
330
14
356
16
406
Threaded
L
in
mm
9.02
229
9.76
248
10.98
279
12.99
330
Flanged
(RTJ) L
in
mm
11.62
295
13.12
333
14.12
359
17.12
435
Threaded
L
in
mm
9.02
229
9.76
248
10.98
279
12.99
330
Flanged
(RTJ) L
in
mm
14.5
368
16.5
419
15
381
18
457
Threaded
L
in
mm
9.02
229
9.76
248
10.98
279
12.99
330
Flanged
(RTJ) L
in
mm
14.62
359
16.62
422
18.62
473
Threaded
L
in
mm
9.02
229
10.98
279
16.93
430
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
Open
H
in
mm
14.57
370
18.90
480
20.08
510
22.83
580
Open
H
in
mm
14.57
370
18.90
480
20.08
510
22.83
580
W
in
mm
19.25
489
20.19
513
22.50
572
25.94
659
Class 600
W
in
mm
14.02
356
17.72
450
17.72
450
17.72
450
Class 900
Open
W
H
in
in
mm
mm
14.57
14.02
370
356
18.90
17.72
480
450
20.08
17.72
510
450
22.83
17.72
580
450
Class 1500
Open
W
H
in
in
mm
mm
14.57
14.02
370
356
20.08
17.72
510
450
29.92
17.72
760
450
DHV Industries, Inc.
API-6A
2000, 3000, 5000, 6000 (Psi)
2-1/16, 2-9/16,3-1/8, 4-1/16, 5-1/8,7-1/16
PSL1, PSL2, PSL3, PSL4
PR1, PR2
AA, BB, CC, DD, EE, FF
Flanged
Parts List
No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Name
SEAT CAGE
SEAT INSERT
DRAIN FITTING
O-RING
SEAT SEALING
NUT
BOLT
NUT
BOLT
LUBRICATOR
STEM PROTECTOR
INDICATOR COVER
HANDWHEEL
HANDWHEEL NUT
STEM
STEM NUT
LOCK NUT
YOKE
STEM SEALING
RETAINER NUT
BONNET
22
GASKET
23
24
25
26
27
O-RING
EXTERNAL SLEEVE
BODY
O-RING
SEAT BODY
Material
TUNGSTEN CARBIDE
PTFE
STAINLESS STEEL
VITON-B
VITON
ASTM A194 2HM
ASTM A193 B7M
ASTM A194 2HM
ASTM A193 B7M
CARBON STEEL
ASTM A276 420
CARBON STEEL
ASTM A216 WCB
ASTM A194 2HM
17- 4PH
ASTM A439 D2
STAINLESS STEEL
ASTM A216 WCB
VITON
17- 4PH
ASTM A216 WCB
SPIRAL WOUND 316SS
GRAPHITE
VITON-B
17-4PH / TUNGSTEN CARBIDE
08
ANSI
400, 600,900, 1500, 2500 (LB)
2, 2-1/2, 3, 4, 6, 8
PSL1, PSL2, PSL3, PSL4
PR1, PR2
AA, BB, CC, DD, EE, FF
Flanged, Welded
Dimensions
Both sleeves in the external sliding sleeve and seat nozzle are made of solid Tungsten Carbide, which are
abrasion and erosion resistance.
With the pressure-balancing bores in the external sliding sleeve, the stem will face the minimum load from
downstream pressure.
With bean size indicator on the stem, the throttle bore can be observed.
The stem will be locked when tighten to the wing nut position so as to assure the selected flow rate maintained.
Specifications:
ANSI Type Dimension
Class 400
NPS
2"
2 1/2"
3"
2000Psi
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
Flanged
(RTJ) L
in
mm
11.61
295
13.11
333
14.13
359
17.13
435
Threaded
L
in
mm
9.02
229
9.76
248
10.98
279
12.99
330
Flanged
(RTJ) L
in
mm
14.62
359
16.62
422
17.12
435
20.12
511
Threaded
L
in
mm
9.02
229
9.76
248
10.98
279
12.99
330
Flanged
(RTJ) L
in
mm
14.62
359
16.62
422
18.62
473
21.62
549
Threaded
L
in
mm
9.02
229
9.76
248
10.98
279
16.93
3430
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
Open
H
in
mm
14.57
370
18.90
480
20.08
510
22.83
580
Open
H
in
mm
14.57
370
18.90
480
20.08
510
28.35
720
Open
H
in
mm
14.57
370
18.90
480
20.08
510
29.92
760
4"
W
in
mm
14.02
356
17.72
450
17.72
450
17.72
450
3000Psi
NPS
2"
2 1/2"
3"
4"
W
in
mm
14.02
356
17.72
450
17.72
450
17.72
450
5000Psi
NPS
2"
2 1/2"
3"
4"
W
in
mm
14.02
356
17.72
450
17.72
450
17.72
450
NPS
2"
3"
4"
07
Flanged
(RTJ) L
in
mm
11.5
292
13
330
14
356
16
406
Threaded
L
in
mm
9.02
229
9.76
248
10.98
279
12.99
330
Flanged
(RTJ) L
in
mm
11.62
295
13.12
333
14.12
359
17.12
435
Threaded
L
in
mm
9.02
229
9.76
248
10.98
279
12.99
330
Flanged
(RTJ) L
in
mm
14.5
368
16.5
419
15
381
18
457
Threaded
L
in
mm
9.02
229
9.76
248
10.98
279
12.99
330
Flanged
(RTJ) L
in
mm
14.62
359
16.62
422
18.62
473
Threaded
L
in
mm
9.02
229
10.98
279
16.93
430
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
Open
H
in
mm
14.57
370
18.90
480
20.08
510
22.83
580
Open
H
in
mm
14.57
370
18.90
480
20.08
510
22.83
580
W
in
mm
19.25
489
20.19
513
22.50
572
25.94
659
Class 600
W
in
mm
14.02
356
17.72
450
17.72
450
17.72
450
Class 900
Open
W
H
in
in
mm
mm
14.57
14.02
370
356
18.90
17.72
480
450
20.08
17.72
510
450
22.83
17.72
580
450
Class 1500
Open
W
H
in
in
mm
mm
14.57
14.02
370
356
20.08
17.72
510
450
29.92
17.72
760
450
DHV Industries, Inc.
API-6A
2000, 3000, 5000, 6000 (Psi)
2-1/16, 2-9/16,3-1/8, 4-1/16, 5-1/8,7-1/16
PSL1, PSL2, PSL3, PSL4
PR1, PR2
AA, BB, CC, DD, EE, FF
Flanged
Parts List
No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Name
SEAT CAGE
SEAT INSERT
DRAIN FITTING
O-RING
SEAT SEALING
NUT
BOLT
NUT
BOLT
LUBRICATOR
STEM PROTECTOR
INDICATOR COVER
HANDWHEEL
HANDWHEEL NUT
STEM
STEM NUT
LOCK NUT
YOKE
STEM SEALING
RETAINER NUT
BONNET
22
GASKET
23
24
25
26
27
O-RING
EXTERNAL SLEEVE
BODY
O-RING
SEAT BODY
Material
TUNGSTEN CARBIDE
PTFE
STAINLESS STEEL
VITON-B
VITON
ASTM A194 2HM
ASTM A193 B7M
ASTM A194 2HM
ASTM A193 B7M
CARBON STEEL
ASTM A276 420
CARBON STEEL
ASTM A216 WCB
ASTM A194 2HM
17- 4PH
ASTM A439 D2
STAINLESS STEEL
ASTM A216 WCB
VITON
17- 4PH
ASTM A216 WCB
SPIRAL WOUND 316SS
GRAPHITE
VITON-B
17-4PH / TUNGSTEN CARBIDE
08
ANSI
400, 600,900, 1500, 2500 (LB)
2, 2-1/2, 3, 4, 6, 8
PSL1, PSL2, PSL3, PSL4
PR1, PR2
AA, BB, CC, DD, EE, FF
Flanged, Welded
NPS
2"
NPS
150LB
300LB
600LB
900LB
1500LB
2500LB
2000PSI
3000PSI
5000PSI
L
in
mm
7.00
178
7.25
184
7.63
194
8.75
222
8.75
222
10.00
254
7.63
194
8.75
222
8.75
222
NPS
150LB
300LB
600LB
900LB
1500LB
2500LB
2000PSI
3000PSI
5000PSI
RP
2"
3"x2"
3"
4"x3"
4"
6"x4"
6"
8"x6"
3"
A
in
mm
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
L
in
mm
7.25
184
7.63
194
8.25
210
8.75
222
9.5
242
11.38
289
8.25
210
8.75
222
9.5
242
A
in
mm
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
L
in
mm
8.25
210
8.75
222
9.5
242
10.00
254
10.38
264
13.00
330
9.5
242
10.00
254
10.38
264
3"x2"
L
in
mm
7.25
184
7.63
194
8.25
210
8.75
222
9.5
242
11.38
289
8.25
210
8.75
222
9.5
242
FP
Close
in / mm
12.80
325
15
381
19.61
498
24.5
622
4"
A
in
mm
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
L
in
mm
8.25
210
8.75
222
9.51
242
10.00
254
10.38
264
13.00
330
9.5
242
10.00
254
10.38
264
A
in
mm
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
L
in
mm
10.00
254
10.38
264
11.38
289
12.25
311
13.50
343
17.48
444
11.38
289
12.25
311
13.50
343
4"x3"
6"
A
in
mm
13.78
350
13.78
350
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
L
in
mm
10.00
254
10.38
264
11.38
289
12.25
311
13.50
343
17.48
444
11.38
289
12.25
311
13.50
343
A
in
mm
13.78
350
13.78
350
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
L
in
mm
15.0
381
15.38
391
16.5
419
17.52
448
19.62
498
23.75
603
16.5
419
17.52
448
19.62
498
6"x4"
09
Features:
Open
in / mm
13.82
351
16.57
421
21.06
535
27.48
698
A
in
mm
17.72
450
17.72
450
17.72
450
23.62
600
23.62
600
23.62
600
17.72
450
23.62
600
23.62
600
The unique design of the mud gate valve seat assures tight shut-off after exposure to the most rigorous field
conditions.
Rising stems are driven by means of a double acting thread for fast operation with low turning effort.
Both stem and stem screw are permanently lubricated and sealed with the aid of an O-ring between the stem
and screw housing.The stem seal assembly assures sealing under both low and high pressure.
Specifications:
Basic Design and Test
Working Pressure
Main Nominal Size (in)
Product Specification Level
Performance Requirement Level
Material Class
End Connection
API-6A
2000, 3000, 5000 (Psi)
2-1/16, 2-9/16, 3-1/8, 4-1/16
PSL1, PSL2, PSL3, PSL4
PR1, PR2
AA, BB, CC, DD, EE, FF
Flanged, Thread, Union
Parts List
8"x6"
A
in
mm
17.72
450
17.72
450
17.72
450
23.62
600
23.62
600
23.62
600
17.72
450
23.62
600
23.62
600
ANSI
400, 600, 900, 1500 (LB)
2, 2-1/2, 3, 4
PSL1, PSL2, PSL3, PSL4
PR1, PR2
AA, BB, CC, DD, EE, FF
Flanged, Thread, Union
No
Name
Material
BODY
AISI 4130
BONNET SEAL
VITON-B
BONNET
AISI 4130
NUT
BOLT
PACKING RING
STAINLESS STEEL
O-RING
BUNA-N
SCREW HOUSING
O-RING
BUNA-N
10
HANDWHEEL
CARBON STEEL
11
NUT
AISI 1045+ZN
12
BOLT
13
NUT
14
GLAND
STAINLESS STEEL
15
PACKING
BUNA-N
16
STEM
AISI 4130+NITRIDED
17
INJECTION FITTING
STAINLESS STEEL
18
GATE
AISI 4130+NITRIDED
19
SEAT
AISI 4140+BUNA-N
06
2 1/16"
2 9/16"
3 1/8"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
L
in
mm
11.62
295
13.12
333
14.12
359
17.12
435
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
E
in
mm
4.81
122
5.63
143
6.94
176
8.63
219
H
in
mm
19.25
489
20.19
513
22.50
572
25.94
659
2000Psi
W
in
mm
11.00
280
13.00
330
13.00
330
16.00
406
L
in
mm
14.62
359
16.62
422
17.12
435
20.12
511
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
E
in
mm
5.06
129
5.94
151
7.31
186
9.06
230
H
in
mm
19.44
494
20.44
519
22.75
578
26.38
670
3000Psi
W
in
mm
13.00
330
16.00
406
16.00
406
20.00
508
L
in
mm
14.62
359
16.62
422
18.62
473
21.62
549
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
E
in
mm
5.06
129
5.94
151
7.31
186
9.06
230
H
in
mm
19.44
494
20.44
519
22.75
578
26.38
670
5000Psi
W
in
mm
13.00
330
16.00
406
16.00
406
20.00
508
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
05
L
in
mm
9.63
244
10.25
260
11.38
289
13.00
330
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
E
in
mm
4.81
122
5.63
143
6.94
176
8.63
219
H
in
mm
19.25
489
20.19
513
22.50
572
25.94
659
2000Psi
W
in
mm
11.00
280
13.00
330
13.00
1330
16.00
406
L
in
mm
9.63
244
10.25
260
11.38
289
13.00
330
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
E
in
mm
5.06
129
5.94
151
7.31
186
9.06
230
H
in
mm
19.44
494
20.44
519
22.75
578
26.38
670
3000Psi
W
in
mm
13.00
330
16.00
406
16.00
406
20.00
508
L
in
mm
9.63
244
10.25
260
11.38
289
13.00
330
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
E
in
mm
5.06
129
5.94
151
7.31
186
9.06
230
H
in
mm
19.44
494
20.44
519
22.75
578
26.38
670
5000Psi
W
in
mm
13.00
330
16.00
406
16.00
406
20.00
508
Equivalent
Orifice DIA.
(Bean Size)
Orifice Area (in2)
Cv* Values
2FB
3RB
3FB
4RB
4FB
6RB
6FB
8RB
Equivalent
Orifice DIA.
(Bean Size)
Orifice Area (in2)
Cv* Values
2FB
3RB
3FB
4RB
4FB
6RB
6FB
8RB
20
32
48
64
80
96
112
128
144
160
0.077
1.4
0.196
3.7
0.442
8.3
0.785
14.8
1.227
23.2
1.767
33.3
2.405
45.4
3.142
59.3
3.976
75.0
4.909
92.6
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
256
272
288
304
15.90
318
17.72
354
176
192
208
224
240
5.940
112.1
7.069
141
8.296
166
9.621
192
11.0447
221
*
*
*
*
12.57 14.1863
251
284
*CV values listed above are the approximation for each bean size and may vary for different valve configurations.
Flow,%
NPS
Valve Lift,%
Trim Configuration
The three basic types of flow characteristics are quick opening, linear, and equal percentage.
Controllability of a valve throughout its range is maximized with equal percent trim. This trim meets the precise
control requirements at low set points, yet still offers overall flow capacity.
The linear configuration provides good control in the upper range but suffers from poor control in the lower region.
Quick opening trim is only suitable for use at the upper end of its travel.
10
Features:
Specifications:
Basic Design and Test
Working Pressure
Main Nominal Size(in)
Product Specification Level
Performance Requirement Level
Material Class
End Connection
Specifications:
Basic Design and Test
Working Pressure (Psi)
Main Nominal Size
Product Specification Level
Performance Requirement Level
Material Class
Working Temperature
API-6A
ANSI
2000, 3000, 5000, 10000, 15000, 20000 (Psi) 400, 600, 900, 1500, 2500 (LB)
2-1/16, 2-9/16, 3-1/16, 3-1/8, 4-1/16
2, 2-1/2, 3, 4, 6, 8
PSL1, PSL2, PSL3, PSL4
PSL1, PSL2, PSL3, PSL4
PR1, PR2
PR1, PR2
AA, BB, CC, DD, EE, FF
AA, BB, CC, DD, EE, FF
Flanged, Thread, Flanged and Thread
Flanged, Weld
API-6A
2000, 3000, 5000
1-13/16, 2-1/16, 2-9/16, 3-1/16, 3-1/8, 4-1/16
PSL1, PSL2, PSL3, PSL4
PR1, PR2
AA, BB, CC, DD, EE, FF
-50 OF~250 OF (L~U)
Parts List
Parts List
No Name
Material
1
2
3
4
5
6
7
8
9
10
11
12
13
14
VITON-B
AISI 4135
AISI 4140
ASTM A182 F6a
VITON
ASTM A182 F6a
AISI 4130
AISI 4135
ASTM 47
CARBON STEEL
CARBON STEEL
AISI 4130
VITON-B
AISI 4130
O- RING
SEAT
DRAIN FITTING
MALE ADAPTER
V- PACKING
FEMALE ADAPTER
WING NUT
STEM
HANDWHEEL
INDICATOR
LUBRICATOR
BONNET
O- RING
BODY
No Name
Dimensions
NPS
600LB
900LB
1500LB
2500LB
2000PSI
3000PSI
5000PSI
L
in
mm
6.38
162
7.25
184
7.25
184
8.75
222
6.44
163.5
7.31
185.5
7.31
185.5
2``
H
in
mm
8.44
215
8.44
215
8.44
215
8.44
215
8.44
215
8.44
215
8.44
215
A
in
mm
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
L
in
mm
7
178
7.5
190.5
9.25
235
11.3
287
7.06
179.5
7.57
192
9.31
236.5
11
3``
H
in
mm
10.19
259
10.19
259
10.19
259
10.19
259
10.19
259
10.19
259
10.19
259
A
in
mm
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
13.78
350
L
in
mm
8.5
216
9
228.5
10.75
273
13.25
336.5
8.56
217.5
9.06
230
10.81
274.5
4``
H
in
mm
18.19
462
18.19
462
18.19
462
18.19
462
18.19
462
18.19
462
18.19
462
A
in
mm
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
17.72
450
L
in
mm
11
279.5
12
305
13.87
352
18
457
11.06
281
12.06
306.5
14
355.5
6``
H
in
mm
22
559
22
559
22
559
22
559
22
559
22
559
22
559
A
in
mm
17.72
450
23.62
600
23.62
600
23.62
600
17.72
450
23.62
600
23.62
600
Material
GREASE FITTING
AISI 4140
BODY
AISI 4130
GREASE FITTING
AISI 4140
NUT
BOLT
GREASE FITTING
STAINLESS STEEL
PACKING
TEFLON
BEARING
STEEL
GREASEI ZERK
STAINLESS STEEL
10
BEARING GLAND
AISI 1045
11
HANDWHEEL
12
PACKING GLAND
AISI 4130
13
BONNET
AISI 4130
14
STEM
AISI 4130
15
GATE
AISI 4130
16
BONNET GASKET
17
GATE SPRING
INCONEL X-750
18
SEAT RETAINER
AISI 4135
19
SEAT
TEFLON
04
Positive Choke
Body to bonnet contact behind the O-ring seal eliminates bonnet seal extrusion.
The bean of positive choke are made of ceramic or hard alloy steel. Both have the feature of abrasion resistance,
erosion resistance and reliable serviceability.
Flow bean chamfers are available from 2/64 to 64/64, in 1/64 increments for precise regulation of flow rate.
The choke bean may be dismantled quickly for change of beans.
Specifications:
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
Dimensions
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/8"
4 1/16"
L
in
mm
11.62
295
13.12
333
14.12
359
17.12
435
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
H
in
mm
17.75
451
20.06
510
22.00
559
25.00
635
2000Psi
W
in
mm
9.84
250
9.84
250
13.00
330
13.00
330
L
in
mm
14.62
359
16.62
422
17.12
435
20.12
511
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
H
in
mm
17.83
453
20.06
510
22.76
578
26.25
667
3000Psi
W
in
mm
13.00
330
13.00
330
13.00
330
15.75
400
NPS
2 1/16"
2 9/16"
3 1/16"
4 1/16"
NPS
2 1/16"
2 9/16"
3 1/16"
4 1/16"
03
L
in
mm
14.62
359
16.62
422
18.62
473
21.62
549
D
in
mm
2.06
52.4
2.56
65.1
3.12
79.4
4.06
103.2
H
in
mm
17.83
453
20.06
510
23.35
593
26.38
670
5000Psi
W
in
mm
13.00
330
13.00
330
15.75
400
17.75
450
L
in
mm
20.50
521
22.25
565
24.38
619
26.38
670
D
in
mm
2.06
52.4
2.56
65.1
3.06
77.72
4.06
103.2
H
in
mm
28.38
721
34.63
879
25.55
649
41.56
1056
10000Psi
W
in
mm
15.75
400
17.75
450
17.75
450
19.68
500
L
in
mm
19.00
483
21.00
533
23.56
598
29.00
737
D
in
mm
2.06
52.4
2.56
65.1
3.06
77.72
4.06
103.2
H
in
mm
28.38
721
36.50
927
37.06
941
43.00
1092
15000Psi
W
in
mm
15.75
400
17.75
450
17.75
450
19.68
500
API-6A
2000, 3000, 5000, 10000, 15000, 20000
1-13/16, 2-1/16, 2-9/16, 3-1/16, 3-1/8, 4-1/16
PSL1, PSL2, PSL3, PSL4
PR1, PR2
AA, BB, CC, DD, EE, FF
Flanged, Thread, Flanged and Thread
Parts List
No
1
2
3
4
5
6
7
8
Name
O-RING
SEAT
BODY
DRAIN FITTING
WING NUT
O-RING
BONNET
Material
VITON-B
AISI 4135
AISI 4135
AISI 4140
AISI 4130
VITON-B
AISI 4135
GLAND RING
ALLOY STEEL
12
Check Valve
Features:
Check valve flows in single direction.
Check valve may be furnished in the following types:
Regular swing check
Full opening swing check
Lift check, reduced opening
It is usually used for kill manifold.
Features:
Specifications:
Basic Design and Test
Working Pressure (Psi)
Main Nominal Size (in)
Product Sepcification Level
Performance Requirement Level
Material Class
End Connection
Specifications:
API-6A
2000, 3000, 5000, 10000, 15000
2-1/16, 2-9/16, 3-1/16, 3-1/8, 4-1/16
PSL1, PSL2, PSL3, PSL4
PR1, PR2
AA, BB, CC, DD, EE, FF
Flanged, wafer, Treaded
Material Class
Working Temperature
Parts List
No Name
Parts List
Parts List
No
1
2
3
4
5
6
7
8
9
10
Name
GASKET
BONNET
NUT
BOLT
SPRING
DISC
BODY
SEAT
O-RING
SCREW
Material
No
1
2
3
4
5
6
7
8
9
10
11
12
13
AISI 4130
2HM
B7M
INCONEL X-750
AISI 4130
AISI 4130
AISI 4135+VITON
VITON-B
AISI 4130
Name
BOLT
COVER
GASKET
BOLT
NUT
HINGE
CLAPPER PIN
HINGE
DISC NUT
DISC WASHER
DISC
SEAT RING
BODY
Material
ASTM A193 B7M
ASTM A-487-4C
SPIRAL WOUND 316SS GRAPHITE
Material
STEM
AISI 4135
GLAND RING
COPPER
BOLT
NUT
BEARING
STEEL
DUST SEAL
PTFE
HANDWHEEL NUT
HANDWHEEL
CARBON STEEL
10 BEARING
STEEL
11 GREASE ZERK
STAINLESS STEEL
12 PACKING GLAND
13 BEARING HOUSING
AISI 1045
14 STEM PACKING
15 BONNET
AISI 4130
16 BONNET GASKET
17 STEM NUT
18 GATE
19 SEAT
20 BODY
AISI 4130
21 SEAT SPRING
INCONEL X-750
22 O-RING
VITON-B
13
02
.........................................................................................................
...................................................................................................................
..................................................................................
......................................................................................................................... 13
......................................................................... 14
Code
C = Cast Steel Valves
F = Forged Steel Valves
I = Cast Iron Valves
B = Ball Valves
W = Wellhead Valves
WB = Wafer Butterfly Valves
AA
A = AA
B = BB
C = CC
D = DD
E = EE
F = FF
H = HH
Alloy Steel
BB
ANSI 4130/4140
Alloy Steel
CC
Alloy Steel
Nitrided
ANSI 4130/4140
Stainless
Stainless
630SS
17-4PH
Alloy Steel
ASTM A487-4C
Alloy Steel
NACE
Impact Tested
NACE
4130/4140
4130/4140
MR01-75
ANSI 4130/4140
MR01-75
Nitrided
Nitrided
NACE
ASTM A487-4C
Stainless
17-4PH,
MR01-75
ANSI 4130/4140
NACE
630SS
EE
MR01-75
CA6NM, F6NM
Full
17-4PH,
ASTM A217-CA15
Stainless
630SS
Temperature
Classification
Tomperatare Rating
1 = PSL1
2 = PSL2
3 = PSL3
4 = PSL4
K, L, P, R, S, T, U, V
End Connection
F = RF (B16.5)
J = RTJ (API 6A)
R = RTJ (B16.5)
T = Threaded End
U = Union
W = Welded End
X = Special
CS
Gas, Oil
General Moderately
410, F6NM
SS
Corrosive CO2
SS
17-4PH
4130/4140
410SS,
410SS,
630SS,
630SS,
17-4PH
17-4PH
410SS,
410SS,
630SS,
630SS,
17-4PH,
17-4PH,
General Highly
Corrosive CO2
Low Temperature Sour Gas and Oil
CS
SS
and Oil
Highly Corrosive
SS
K
L
P
R
S
T
U
V
Temperature Ratings
O
Min
Max
- 75
180
- 50
180
- 20
180
Room Temperature
0
180
0
250
0
250
35
250
Min
Max
- 60
82
- 46
82
- 29
82
Room Temperature
- 18
66
- 18
82
- 18
121
2
121
Material Requirements
Material
Class
Service
AA
BB
CC
DD
EE
FF
HH
General
General
General
Sour a
Sour a
Sour a
Sour a
General Oilfield
4130/4140
Temperature Ratings
5000psi, DD Body
Seat
Full
Stainless
Pressure Class
01
410, F6NM
630SS
ASTM A217-CA15
Stainless
Alloy Steel
FF
Nitrided
17-4PH,
17-4PH,
1 = PR1
2 = PR2
4130/4140
Full
DD
PR-1,U Temperature
4130/4140
CA6NM, F6NM
Rating,Threaded End
02 = 2000psi
03 = 3000psi
05 = 5000psi
10 = 10000psi
20 = 20000psi
51 = 150LB
53 = 300LB
56 = 600LB
58 = 800LB
59 = 900LB
65 = 1500LB
75 = 2500LB
ASTM A487-4C
Body Material
Type
Stem
Seal
ASTM A487-4C
.................................................................................................. 11
.................................................................................................................... 12
Type
Service
Bonnet
API 60K,75K
6
8
Trim Material
Material
Type
........................................................................................................ 4
...................................................................................................................................
Check Valve
................................................................................................................... 2
14
DHV Industries,Inc.
3451 Pegasus Drive,
Bakersfield. CA 93308 U.S.A.
Call TollFree: (887) DHV-USA1
Please visit our DHV website: www.dhvindustries.com or www.dhvvalve.com for a copy of our API 6D
monogram certificate. Customer and Project referrals are available upon request. For certified data
and current specifications, please contact us or your local DHV agent. Information provided in this
catalog is for general purposes only.
DHV reserves the right to discontinue the manufacture or change and modify our design and construction of any DHV product, in due course of our manufacturing procedure without incurring any
obligation to accept for credit, to replace or furnish or install such changes or modifcations on
products previously or subsequently sold.
E-mail: sales@dhvindustries.com
Website: www.dhvindustries.com
DHV Industries,Inc.
3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A.
Call TollFree: (887) DHV-USA1
Phone: (661) 392-8948 Fax: (661) 392-8947
E-mail: sales@dhvindustries.com
Website: www.dhvindustries.com
Wellhead Valves