Académique Documents
Professionnel Documents
Culture Documents
Release 5.1
In these notes youll find
Introduction
Supported operating systems
Installing the software
Whats new for release 5.1
Known issues with release 5.1
Introduction
This release of the E6474A software is compatible with the E6473A and E6473B direct connect
hub, CDMA, cdma2000, GSM, iDEN, TDMA, GPRS, UMTS phones, and Agilent E64xx receivers.
Customers who use the Agilent Data Server product E7478A for UDP and TCP testing, are required
to upgrade that application to Version 3.1 at the same time as upgrading E6474A to Version 5.1 to
maintain Client-Server communication compatibility.
Complete information on using the new features can be found in the software's online help.
2.
3.
4.
Install the application to a different drive or folder than the default (C:\Program Files\Agilent
Technologies\E6474A).
Install the Demonstration Plan and Data files from the CD.
Install the Chinese version of the tutorial.
Important note to administrators (Windows 2000 installations): If you are installing E6474A on the
computer of a user who does not have Administrative rights, you must ensure that the user has write
access to the \Shared folder and all of its sub-folders. Without write-access, the user will not be able to
use the software.
New Views
Three new views have been added that support UMTS GSM Multi-RAT phones. The Qualcom 6200
Multi-RAT phone, set to GSM, is currently supported.
Other updates
Installation Screen
The installation now has the option to select the Wireless Network Measurement Software, Analysis
Reporter or Adobe Reader for installation, as well as providing direct access to these release notes.
Analysis Reporter
The Analysis Reporter takes export plan files from the Agilent E6474A system and processes the data
to produce HTML formatted reports that illustrate potential problems with your network. These reports
contain formatted tables, bar-charts, pie-charts, and more.
New Time Bar
You now have far greater control of replaying recorded data. Additional features include:
The Time Bar can be undocked and positioned within the application
Map compression
You now have the ability to set the compression value for large map files. The default map file size limit
is now limited to 50MBytes. Maps larger than this limit are automatically compressed with minimal loss
of resolution.
Numerical display changes from HEX to Decimal in the custom view.
You can now set the base units to be displayed in the custom view. This lets you choose between Hex,
Decimal, Octal, and Binary.
GSM and GPRS Forcing Functions (Sagem phones only)
GSM Handover control has been enhanced by giving you control over the following features:
The iDEN protocol decoder, used in this release, is now compatible with SR11.0.
iDEN UMFI Calls
Call scripting of UMFI calls on iDEN phones are now supported
Supported Phones
A complete list of supported phones can be found in the Library. To access this, select Tools > Library.
Map is not shown while using the demo project files: If you have not used the default installation
folders, the demo map files and cellsite files will be flagged as missing. This is because the path to
these files is stored in the demo plan files using absolute path names. To correct this fault you must first
open the default plan files, then, using the route map properties, change the path to the MIF map files.
For more information on configuring the route map view, refer to the online help.
Jump to markers: Once you have configured your survey markers, set appropriate names for each
marker and recorded data, the jump to markers drop down selector lists those markers while playing
back recorded data. This shows a Marker Text field along with the time of the event, however, if this
data is transferred to another PC, the survey markers will have to be re-configured to maintain the same
marker names, otherwise only the time of the marker will be shown in the selection list.
Labelling devices for auto-merging E6474A files in Actix DV: If you want E6474A data files to be
auto-merged when opened in Actix DV (for example: Modem port, T720 RF parameters, GSM850RX
and GSM1900RX) then you need to the label device capability in the Setup view and use the exact
same label for all four devices.
Modem port would have the label = device1
T720 would have the label = device1
GSM850RX would have the label = device1
GSM1900RX would have the label = device1
This is required BEFORE data collection so that Actix DV will take devices and associate them
together as a single data stream for post processing analysis. If you do not do this you will have to look
at four separate devices and it will make the correlation of data parameters more difficult.
Kyocera 2235 phone: Currently this phone does not respond correctly when connected using a
PCMCIA serial card from Socket IO version E and F.
E6473B GPS-DR is not detected when using a comma decimal separator: The E6473B GPS-DR
will not be detected if your operating system has your regional options configured to show a comma for
your decimal separator. Changing the separator to a full-stop will fix this problem.
Loss of power to the Agilent E6473B Hub causes a lost connection with Motorola iDEN phone
(i85, i88, i90): If you lose power to the Agilent E6473B Hub while it is connected to your PC, restoring
power does not re-establish the connection with the Motorola iDEN phone or E6473B Hub.
To solve this problem switch off the E6473B Hub and restart your PC. After your PC has started, switch
on the E6473B Hub and then start the Agilent E6474A software. It is also recommended that the
E6473B Hub has a direct connection to vehicle power to ensure a continuous power supply.
The Route Map continues to plot the last reported UMTS aggregate Ec value even though no
values are available: When a signal is lost and no more UMTS aggregate Ec values are reported, the
Route Map still displays the last found value. UMTS aggregate Ec values are recorded correctly in the
database. This is only a display issue and does not affect your recorded data.
Lost cellsite linking and cell naming: During playback or live mode, cellsite linking and cell naming
may not work. These features use an older version of the Microsoft Jet Database Engine (MDAC). If
you have the latest version of Microsoft Access2000, then a newer version of MDAC will be installed
and cellsite link and cell naming will no longer work.
If you do not have Microsoft Access2000 installed and you still lose cellsite linking and cell naming, then
check you have correctly setup the cellsite database. Refer to the online help for more information.
Sound is disabled on your PC when you connect an E6473B Hub: Connecting, and installing, the
E6473B Hub adds two USB sound drivers to your PC configuration for use with the audio from each
phone. These drivers disable the sound on your PC. To switch the PC sound back on, follow these
steps:
1.
2.
3.
4.
5.