Académique Documents
Professionnel Documents
Culture Documents
Notes:
(1) Typical power level at least 1 dB higher than minimum. Higher power level available
(2) -95 dBc spurious option available
(3) Other Internal Reference Frequencies to be specified by customer, contact factory for details
(4) Guaranteed phase noise is 5dB higher than typical, with acceptable Reference Noise Floor,
Typical phase noise within loop bandwidth= 20 Log (N) + 3dB, N is the Reference Multiples
(5) Wider temperature range available
(6) +12V supply voltage available
(7) Height dimension of 1.45" exclude tuning screw height (.25" max).
Unit performances frequently meet or exceed typical level
For sales and quotations, please call: (408) 732-0793 direct or send fax to (408) 730-0378
or email to sales@nexyn.com
Applications: PLDROs have the best combination of ultra low phase noise and excellent frequency
accuracy when phase locked to a clean stable crystal reference. PLDROs are ideal choice for high
data rate 64 QAM and 128 QAM digital communication systems in LMDS, MVDS and point to point
digital radios transceivers applications. PLDROs with integrated internal reference provides
excellent phase noise and frequency stability performance in a compact size.
Nexyn Corporation 678 Bend Dr. Sunnyvale, CA 94087 Tel: 408-732-0793 Fax: 408-730-0378 www.nexyn.com
4.5 - 8.99
+/- 20MHz
+12 dBm
9.0-13.99
14.0-16.0
16.01-18.0
+/- 20MHz
+/- 20 MHz
+/- 20 MHz
+11 dBm
+10 dBm
+8 dBm
Coherent to External Reference
+/- 1.0 dB
+/- 1.5 dB
+/- 1.5 dB
+/- 1.5 dB
Will not break lock
-15 dBc
-20 dBc
-25 dBc
-25 dBc
-75 dBc
-75 dBc
-75 dBc
-70 dBc
-80 dBc
-80 dBc
-80 dBc
-75 dBc
10 MHz nominal
10 Times Multiples of External Reference
0+/- 3 dBm nominal
-78 dBc/Hz
-73 dBc/Hz
-72 dBc/Hz
-70 dBc/Hz
-103 dBc/Hz -98 dBc/Hz
-95 dBc/Hz
-92 dBc/Hz
-117 dBc/Hz -112 dBc/Hz -107 dBc/Hz -104 dBc/Hz
-120 dBc/Hz -115 dBc/Hz -110dBc/Hz -107dBc/Hz
-130dBc/Hz -128 dBc/Hz -125 dBc/Hz -120 dBc/Hz
Open Collector, locked open, unlocked ground
Option Available
-10 to +60 deg C
+15 +/- 3% VDC, 325 mA typ (steady state)
SMA Female
Solder pin
2.25"x2.25"x1.45" (53mm x 53mm x 35.6mm)
DC200106
Notes:
(1) Typical power level at least 1 dB higher than minimum. Higher power level available
(2) -95 dBc spurious option available
(3) Other Reference Frequencies to be specified by customer, contact factory for details
(4) Guaranteed phase noise is 5dB higher than typical, with acceptable Reference Noise Floor,
Typical phase noise within loop bandwidth= 20 Log (N) + 3dB, N is the Reference Multiples
(5) Wider temperature range available
(6) +12V supply voltage available
(7) Height dimension of 1.45" exclude tuning screw height (.25" max).
Unit performances frequently meet or exceed typical level
For sales and quotations, please call: (408) 732-0793 direct or send fax to (408) 730-0378
or email to sales@nexyn.com
Applications: PLDROs have the best combination of ultra low phase noise and excellent frequency
accuracy when phase locked to a clean stable crystal reference. PLDROs are ideal choice for high
data rate 64 QAM and 128 QAM digital communication systems in LMDS, MVDS and point to point
digital radios transceivers applications. Dual loop PLDROs with integrated internal reference provides
excellent phase noise performance in a compact size with unmatched frequency stability.
Nexyn Corporation 678 Bend Dr. Sunnyvale, CA 94087 Tel: 408-732-0793 Fax: 408-730-0378 www.nexyn.com
Frequency in MHz
Output Power (over temperature) (min) (1)
Frequency Stability (over temp)
Power variation (over temperature)
Pulling (1.5:1 VSWR) (max)
Harmonics
Discrete Spurious
Reference Spurious (typ) (2)
External Reference Frequency (3)
External Reference Input Power
Typical Phase Noise (4) @ 100 Hz offset
@ 1KHz offset
@ 10KHz offset
@ 100KHz offset
@ 1MHz offset
Phase Lock Alarm
Operating Temperature (base plate) (5)
Power Supply (6)
RF Connector
DC Connector
Size (7):
Outline:
NXOS-XO
100
+12 dBm
< +/- 3 ppm
+/- 1.0 dB
NXOS-PLXO
100
+12 dBm
Coherent to External Reference
+/- 1.0 dB
All Phases
<-40 dBc
<-40 dBc
<-75 dBc
<-75 dBc
N/A
-80 dBc
N/A
10 MHz nom
N/A
0+/- 3 dBm nominal
-115 dBc/Hz
-115 dBc/Hz
-140 dBc/Hz
-140 dBc/Hz
-155 dBc/Hz
-155 dBc/Hz
-160 dBc/Hz
-160 dBc/Hz
-163 dBc/Hz
-163 dBc/Hz
N/A
Open Collector, Locked "High"
-10 to +60 deg C
+15 +/- 3% VDC, 180 mA typ (steady state)
SMA Female
Solder pin
2.25"x2.25"x.84" (53mm x 53mm x 21.3mm)
DC200105
Notes:
(1) Typical power level at least 1 dB higher than minimum. Higher power level available
(2) -95 dBc spurious option available
(3) Other Reference Frequencies to be specified by customer, contact factory for details
(4) Guaranteed phase noise is 5dB higher than typical
(5) Wider temperature range available
(6) +12V supply voltage available
Unit performances frequently meet or exceed typical level
For sales and quotations, please call: (408) 732-0793 direct or send fax to (408) 730-0378
or email to sales@nexyn.com
Applications: High stability, very low phase noise crystal reference source. To be used as "Add
On Reference Module" to all phase locked sources using an external reference, or as intermediate
reference sources phase locked to lower frequency standards. Mounting hole patterns are
compatible to general industry phase locked oscillators.
Nexyn Corporation 678 Bend Dr. Sunnyvale, CA 94087 Tel: 408-732-0793 Fax: 408-730-0378 www.nexyn.com