Académique Documents
Professionnel Documents
Culture Documents
However, if cement is added to lime, the change is not limited to just the physical
appearance. It alters the chemical as well as mechanical properties such as
durability, elasticity, porosity, and colour. Many-a-time, contractors add lime to
cement in an attempt to lessen the effect of these properties.
Lime plaster has many uses. The most common is for frescoes that are created
using colour pigments diluted with water and applied on a wet plastered surface.
1. Carbon Dioxide Emissions: By using lime plaster, the world can save at least 80%
of carbon dioxide emission when compared to regular stucco finishes. For ex. If an
average sized house used lime plaster as wall and ceiling material, it will help save
approximately 5,000 to 10,000 lbs of carbon dioxide emission. Switching to
hydraulic lime will help reduce many hundreds of thousands of pounds of carbon
dioxide from being released in our atmosphere, leading to a cleaner and healthy
environment.
2. Better Flexibility: Lime mortar has a good level of elasticity. Therefore, it is able to
adjust and settle on walls and other surface rather easily as it doesn't set quickly.
On the other hands, cement based mortar is more rigid in nature and is unable to
adjust quickly to changes around it.
The lime plaster used in historic buildings (and many modern structures) had
compressive strength of approximately 400psi. However, natural hydraulic lime with
a compressive strength of between 800 to 1600 psi was lower than Portland
cement's 3600 psi. Higher compressive strength leads to lesser flexibility. Since lime
plaster has lower psi, it offers enhanced flexibility that is necessary a long life.
Perhaps it is this quality that has ensured that many lime mortar structures have
lasted for almost 10-20 decades!
3. Increased Porosity: Since lime plaster doesn't set completely in a short time
period, it can adjust to any early movements in structure. As the plaster carbonates,
any small cracks that emerge can be quickly resealed automatically by drawing
water from the atmosphere. This ensures that you benefit from smooth surfaces for
a long time to come.
4. Autogenous Healing: Since NHL (natural hydraulic lime) is much more breathable
than cement, it tends to shed water easily too. While cement mortar tends to crack
under undue stress or movement after it sets allowing for water to pass through,
lime mortar adjusts quickly to stress and other changes at the onset due to its slow
carbonation setting process. Simply said, lime plaster can reabsorb carbon dioxide
and reseal any cracks that may appear leading to self-healing. This characteristic of
lime is known as autogenous healing.'
However, because of the slow setting characteristic of lime plaster, it tends to
remain soft for a long period of time (read months). Besides this lime is a very
caustic material when mixed with water and calls for use of safety measures such
as protective gear at all times.
Since lime putty is highly plastic, other mitigating materials have to be added to it
to improve its plasticity and workability. Today gypsum plaster has replaced lime
plaster as the preferred choice for interior base coat. Lime mortar is almost always
used to give a finishing coat to interior surfaces.
If you found this page useful please click the +1 button below to tell Google that its
a great page!