Académique Documents
Professionnel Documents
Culture Documents
PROCOAT H.08.HT
Procoat H.08.HT is a polypropylene copolymer compound supplied in pellet form, white color, with very good
extrudability and melt strength performances. It is suitable to withstand high pipeline operating temperatures,
typical up to 120C for onshore pipelines and up to 140C for offshore pipelines depending on specific
pipeline design conditions. It contains UV-stabilizer and anti-oxidant in order to ensure excellent weathering
resistance and excellent long term properties.
Commercial Name
Procoat H.08.HT
Application
Procoat H.08.HT is recommended to use in typical multi layer PP or three layer PP (3LPP) coating
application for steel pipes.
Produced by
Physical Properties
Properties
Units
Range Values 1)
g/cm3
0.90 0.93
g/10 min
0.6 1.0
1.9 2.3
ISO 6964
MPa
22
400
Tensile Modulus
MPa
900
OIT @ 220C
min
30
ISO 11357
Shore D
60
ASTM D2240
145
kJ/m2
30
ISO 179-1/1eA
kJ/m2
ISO 179-1/1eA
< 35
ISO 21809-1
< 35
ISO 21809-1
Hardness
Vicat Softening Temperature A50 (10N)
Test Methods
1) Above range values should not be used for specification purposes. Coating plant processing and application conditions can affect the final material properties.
Applicator is responsible for final control and determination of the final coating properties.
2) Injection moulded test specimen (2 mm) prepared according ISO 1873-2, test specimen type 1A according ISO 527-2, strained at 50 mm/minute
3) Injection moulded test specimen (2 mm) prepared according ISO 1873-2, test specimen type 1A according ISO 527-2, strained at 1 mm/minute
Page
Issued by
Verified by
Approved by
Issue date (028)
1/2
TEC R&D
QAM
ATC
April 2011
Processing/Extrusion
Recommendations
190C - 240C
220C - 245C
220C - 245C
220C - 245C
220C - 245C
Specifications
Procoat H.08.HT complies with the requirements as per following national and international standards,
when used in combination with Proesive grafted adhesives and if correct process, application and quality
control procedures are implemented by applicator.
NF A 49711
DIN 30678
ISO 21809-1
DEP 31.40.30.31 GEN
Storage
Procoat H.08.HT should be stored indoor, in dry conditions at temperatures below 50C, protected from
UV-light in closed (original) packaging. Improper storage can initiate degradation which can have a negative
influence on the physical properties of this product.
Safety
Procoat H.08.HT is classified as no-dangerous material. Material Safety Data Sheet is on request available.
Please contact Industrie Polieco MPB Srl. for more information.
Packaging
Disclaimer
All information contained in this document is to the best of our knowledge accurate and reliable as from the
date of publication however we do not presume any liability for exactness and/or entirety of this information.
All information contained in this document is obtained by test performances and trials carried out by our
laboratories and R&D center but shall in no event be held to involve any warranty.
Industrie Polieco MPB Srl. will issue no warranties which reach beyond information contained in this
document and no information contained in this document will create any warranty for any other
exceptional purpose. The product mentioned in this document should not be used for healthcare, medical
or pharmaceutical applications.
Industrie Polieco MPB Srl. cannot accept any liability in respect of handling, processing or usage of the
product mentioned in this document which must be in all situations executed in accordance with all local
laws and/or regulations under clients responsibility.
All information contained in this document relates only to the usage of our product(s) and no liability can
be accepted when used in combination with other products.
Page
Issued by
Verified by
Approved by
Issue date (028)
2/2
TEC R&D
QAM
ATC
April 2011