Académique Documents
Professionnel Documents
Culture Documents
00
15 JAN 2014
22 OCT 2013
DATE
AKM
AKM
REV. NO.
CLIENT:
ISSUED BY
FOR APPROVAL
FOR APPROVAL
REVISION DETAILS
STATE OF KUWAIT
CONTRACT NO.
MEW/C/4608-2013/2014
A/SE/DCSY-CAL/101219 Rev. 01
CONTRACTOR:
ALGHANIM INTERNATIONAL
CONTRACTORS CONSULTANT:
PROJECT:
DRAWN
DESIGNED
CHECKED
APPROVED
DEPT.
ORIG. PC : KWU3025
DATE
15 JAN
2014
15 JAN
2014
15 JAN
2014
NAME
SG
SH
SCALE:
TITLE:
SIZE:
CALCULATION FOR
UPS SYSTEM SIZING
TYPE: YT10
CONTENT CODE
BRU
AKM
ELEC
DEPT. ELEC
DOCUMENT NO.
KWU3025-YT10-BRU-6330337
UNID 081148337
REV.
01
PAGE NO. C 01
Rev.:- 01
1 of 5
Approved By :- AKM
PREPARED
REVISION
NO.
NAME
00
SG
01
SG
DATE
22 OCT
2013
15 JAN
2014
MECH
SYSTEM
REVISION CERTIFICATION
REVIEWED
NAME
MECH
ELECT
CIVIL
PIPING
APPROVED
C&I
SH
ARU
SH
ARU
DATE
22 OCT
2013
15 JAN
2014
NAME
DATE
22 OCT
2013
15 JAN
2014
AKM
AKM
REV.
Rev.:- 01
DETAILS / DESCRIPTION
DATE
00
FOR APPROVAL
22 OCT 2013
01
FOR APPROVAL
15 JAN 2014
2 of 5
Approved By :- AKM
TABLE OF CONTENTS
1.0
2.0
3.0
ASSUMPTIONS .................................................................................................................................... 4
4.0
METHODOLOGY .................................................................................................................................. 4
5.0
6.0
CALCULATIONS ................................................................................................................................... 5
7.0
RESULTS .............................................................................................................................................. 5
8.0
REFERENCES ...................................................................................................................................... 5
9.0
ATTACHMENTS ................................................................................................................................... 5
Rev.:- 01
3 of 5
Approved By :- AKM
2.0
DESIGN INPUTS
2.1
2.2
3.0
3.1
Loads are obtained in KVA only. However, wherever loads are obtained in KW, a power factor of 0.85
is considered to derive into equivalent KVA. [EJ]
3.2
Load factor for Continuous loads (C) is considered as 1 whereas for Intermittent (I) loads, it is
considered as 0.3. [EJ]
3.3
Rating of various Loads considered shall be verified after receipt of vendor inputs [U].
3.4
For Data Centre, ADCS, Siemens GTG and IPBX separate UPS shall be procured & sizing for the
same is out of scope of this calculation.
4.0
METHODOLOGY
4.1
4.2
25% design margin is considered in UPS sizing as per clause no 5E.8.2 of Volume 4 of 8, Section 5E.
4.3
4.4
5.0
Rev.:- 01
ACCEPTANCE CRITERIA
4 of 5
Approved By :- AKM
The selected UPS will be able to supply the required power for continuous operation of the connected
load.
6.0
CALCULATIONS
6.1
7.0
RESULTS
7.1
The selected rating of UPS is 135 kVA (Output kVA) at 50deg.C design ambient.
8.0
REFERENCES
8.1
9.0
ATTACHMENTS
9.1
Rev.:- 01
5 of 5
Approved By :- AKM