Vous êtes sur la page 1sur 32

FINISH

0671 DULUX painting

0671 DULUX PAINTING

GENERAL

.1.1

RESPONSIBILITIES

General
Requirement: Provide DuluxGroup/Dulux coating systems to substrates, as documented and as
follows:
- Consistent in colour, gloss level, texture and dry film thickness.
- Free of runs, sags, blisters, or other discontinuities.
- Paint systems fully opaque.
- Clear finishes at the level of transparency consistent with the product.
- Fully adhered.
- Resistant to environmental degradation within the manufacturers stated life span.
.1.2

COMPANY CONTACTS

DuluxGroup/Dulux technical contacts


Architects and Specifiers Hotline (Paint, Acratex, Protective Coatings): 13 23 77.
Powder Coatings Technical Advice Hotline: 13 24 99.
Website: www.dulux.com.au/contact-us/architects-and-specifiers
.1.3

CROSS REFERENCES

General
Requirement: Conform to the following worksection(s):
- General requirements.
[complete/delete]
[complete/delete]
.1.4

STANDARDS

Painting
General: To the recommendations of those parts of AS/NZS 2311 which are referenced in this
worksection.
.1.5

MANUFACTURERS DOCUMENTS

Technical manuals
Product Guide: www.dulux.com.au/specifier/product/product-selector
Duspec Product Data Sheets, MSDS, paint system selection: www.dulux.com.au/specifier/duspec
.1.6

INTERPRETATION

Abbreviations
General: For the purposes of this worksection the following abbreviations apply:
- ASU: Acrylic sealer undercoat multipurpose combo product.
- DFT: Dry film thickness.
- PDS: Product data sheet.
- PRN: Paint reference number.
- PSU: Primer sealer undercoat multipurpose combo product.
- WFT: Wet film thickness.
Definitions
General: For the purposes of this worksection the definitions given in AS/NZS 2310 and the following
apply:
- Adhesion: The sum total of forces of attachment between a dry film and its substrate.
- Finish coat: The final coat of a coating system.
NATSPEC (Oct 13)

[insert date]

FINISH

0671 DULUX painting

- Gloss: The optical property of a surface, characterised by its ability to reflect light specularly.
- Gloss unit: Numerical value for the amount of specular reflection relative to that of a standard
surface under the same geometric conditions.
- Levels of gloss finish: When the specular direction is 60 degrees, a surface with the following
specular gloss reading are defined by AS 1580 and as follows:
. Full gloss finish between 50 and 85 gloss units.
. Semi gloss between 20 and 50 gloss units.
. Low gloss between 5 and 20 gloss units (also known as low sheen).
. Flat finish less than 5 gloss units (also known as matt).
- Opacity: The ability of a paint to obliterate the colour difference of a substrate.
- Paint: A product in liquid form, which when applied to a surface, forms a dry film having protective,
decorative or other specific technical properties.
- Primer, prime coat: The first coat of a painting system that helps bind subsequent coats to the
substrate and which may inhibit its deterioration.
- Sealer: A product used to seal substrates to prevent:
. Materials from bleeding through to the surface.
. Reaction of the substrate with incompatible top coats.
. Undue absorption of the following coat into the substrate.
- Sheen: Gloss which is observed on an apparently matt surface at glancing angles of incidence.
- Substrate: The surface to which a material or product is applied.
- Undercoat: An intermediate coat formulated to prepare a primed surface or other prepared surface
for the finishing coat.
.1.7

INSPECTION

Notice
Inspection: Give notice so that inspection may be made of the following:
- Painting stages:
. Completion of surface preparation.
. After application of prime or seal coats.
. After application of undercoat.
. After application of each subsequent coat.
- Clear finishing stages:
. Before surface preparation of timber.
. Completion of surface preparation.
. After staining.
. After sanding of sealer.
. After application of each clear finishing coat.
.1.8

SUBMISSIONS

Clear finish coated samples


General: Submit pieces of timber or timber veneer matching the timber to be used in the works,
prepared, puttied, stained, sealed and coated in conformance with the specified system, of sufficient
size so that, each piece can be cut into 4 segments, marked for identification, and distributed as
directed.
Coated samples schedule
Substrate
Paint system
Colour
Sample size
e.g. Plasterboard
P1
Dulux Vivid White
A4

NATSPEC (Oct 13)

[insert date]

FINISH

0671 DULUX painting

Opaque coated samples


General: Submit, on representative substrates, samples of each coating system showing surface
preparation, colour, gloss level, texture, and physical properties.
Paint
General: Dulux coatings systems have been selected for this project. Submit the manufacturers
details at least 3 weeks before the paint is required, as follows:
- Paint brand name and paint line quality statement.
- Material safety data sheets (MSDS) showing the health and safety precautions to be taken during
application.
- The published recommendations for maintenance.
Specialist applicators
General: Submit name and contact details of proposed specialist applicators.
Evidence of experience: [complete/delete]
Substrate acceptance
Applicator: Submit the applicators certification of the acceptability of the paint finish substrate.
Timing: Before commencing installation.
Warranty
Material Warranty: Submit the manufacturers material warranty as follows:
- Extent: Paintwork generally.
- Terms: Paint systems are suitable for their intended use.
- Warranty period: As defined by the manufacturer.
Material Performance Warranty: Submit an alternative performance warranty as follows:
Extent: [complete/delete]
- Terms: Submit the performance criteria as defined by the manufacturer.
- Measure: As defined by the manufacturer.
- Warranty period: As defined by the manufacturer.
Timing: Before the application of the paint system.
Wet samples
General: Submit two 500 mL samples, clearly labelled, of each type of paint to be tested.
Wet samples schedule
Paint type
Colour
e.g. Dulux Acratex Acrashield Low Gloss
Garden Picket (P15.F3)

PRODUCTS

.2.1

GENERAL

Product substitution
Other paint: Conform to PRODUCTS, GENERAL, Substitutions in the General
requirements worksection.
.2.2

PAINTS

Combinations
General: Do not combine paints from different manufacturers in a paint system. Dulux paint products
and coating systems have been selected and specified for this project. Any unauthorised product
substitution will void the Warranties.
Clear timber finish systems: Provide only the combinations of putty, stain and sealer recommended by
the manufacturer of the top coats.
Delivery
General: Deliver paints to the site in the original manufacturers labelled and unopened containers.
NATSPEC (Oct 13)

[insert date]

FINISH

0671 DULUX painting

Tinting
General: Provide only products which are colour tinted by the manufacturer or supplier.
Toxic ingredients
General: To the requirements of Appendix I Uniform Paint Standard to the Standard for the Uniform
Scheduling of Medicines and Poisons (SUSMP).
Standards
Paint types: Conform to the Australian Standard as referenced in the OCP/Dulux paint type
reference table.
DuluxGroup/Dulux paint type reference table legend
Key:
ASU = Acrylic Sealer/Undercoat.
NE = No Equivalent.
PSU = Primer/Sealer/Undercoat.
Low VOC products are noted in the Table.
^ Use is discouraged in favour of water based paints because of environmental concerns.
# These paints have either limited availability or low requirement in the Building Industry.
DuluxGroup/Dulux paint type reference table
Paint type
DuluxGroup/Dulux Dulux PDS No.
AS/NZS
Standard
material
2311 PRN (Table
description
4.2)
Semi gloss solvent- Dulux Super
DD0028
B3
AS 3730.5
borne: interior
Enamel Semi-Gloss
Semi-gloss water- Dulux Aquanamel
DD1281
B41
NE
borne, interior
Semi Gloss
/exterior trim (alt
(low VOC)
B8b)
Gloss solventDulux Spray Pak
DD0009
B4#
NE
borne: aerosols
Full gloss solvent- Dulux Super
DD0145
B5a
AS 3730.6
borne: exterior
Enamel Full Gloss
Full gloss solvent- Dulux Super
DD0026
B5b
AS 3730.6
borne: interior
Enamel Full Gloss
Full gloss waterDulux Aquanamel
DD1282
B42
NE
borne
Gloss
interior/exterior trim (low VOC)
(alt B9b)
Flat latex: exterior Dulux
DD1450
B6a
AS 3730.7
Weathershield Matt
Acrylic (low VOC)
Flat latex: interior
Dulux Wash & Wear DD1095
B6b
AS 3730.1
101 Adv Flat Acrylic
(low VOC)
Flat latex: interior
Dulux White Ceiling DD1403
B6c
AS 3730.1
ceilings
Paint eco
choice (low VOC)
Flat latex: interior
Dulux Professional DD1466
B6d
AS 3730.1
ceilings (tinted
EnvirO2 Tintable
colours)
Ceiling Flat (low
VOC)
Low gloss latex:
Dulux
DD0053
B7a
AS 3730.8
exterior
Weathershield Low
Sheen Acrylic (low
VOC)
Low gloss latex:
Dulux Wash & Wear DD1096
B7b
AS 3730.3
NATSPEC (Oct 13)

[insert date]

FINISH

Paint type

DuluxGroup/Dulux
material
description
interior
101 Adv Low Sheen
Acrylic (low VOC)
Dulux Wash & Wear
Kitchen & Bathroom
Low Sheen (low
VOC)
(Mouldshield +
Anti-Bacterial)
Semi gloss latex:
Dulux
exterior
Weathershield Semi
Gloss Acrylic
Semi gloss latex:
Dulux Wash & Wear
interior
101 Adv Semi Gloss
Acrylic (low VOC)
Dulux Wash & Wear
Kitchen & Bathroom
Low Sheen (low
VOC)
(Mouldshield +
Anti-Bacterial)
Gloss latex:
Dulux
exterior
Weathershield
Gloss Acrylic
Gloss latex: interior Dulux Wash & Wear
101 Adv Gloss
Acrylic (low VOC)
Dulux Aquanamel
Gloss (low VOC)
Gloss water-borne Dulux Aquanamel
interior/exterior trim Gloss (low VOC)
(alt B9a/B9b)
Wood primer,
Dulux 1 Step Oil
solvent-borne
Based Primer
Sealer Undercoat
Wood primer, latex Dulux 1 Step Acrylic
Primer Sealer
Undercoat
Metal primer for
Dulux Quit Rust
steel solventCold Galv. Primer
borne
Dulux Luxaprime
Zinc Phosphate
Primer
Metal primer, latex Dulux Quit Rust All
Metal (water based,
low VOC)
Metal primer for
Dulux Quit Rust All
zinc-coated
Metal (water based,
surfaces, latex
low VOC)
Metal primer for
Dulux Quit Rust
non ferrous metals All Metal (water
based, low VOC)
Zinc-rich organic
Dulux Zinc Rich 1P
binder/primer for
Primer
steel
NATSPEC (Oct 13)

0671 DULUX painting

Dulux PDS No.

AS/NZS
2311 PRN (Table
4.2)

Standard

DD0037

B8a

AS 3730.9

DD1097

B8b

AS 3730.2

DD0054

B9a

AS 3730.10

DD1098

B9b

AS 3730.12

DD1282

B42

NE

DD1227

B10

AS 3730.13

DD1192

B10A

AS 3730.17

DI1051

B11

AS 3730.21

DD1453

B11a#

AS 3730.15

DD1453

B12a

AS 3730.15

DD1453

B13

AS 3730.17

DI0541

B14

AS 3730.9

DD1516

DD1516

DD1282

DI1136

[insert date]

FINISH

Paint type

DuluxGroup/Dulux
material
description
Concrete and
Dulux Sealer Binder
masonry sealer
Dulux Acratex
Acraprime 501/2
Berger Gold Label
Acrylic Block Filler
Clear low viscosity Dulux AquaTread
paint for concrete Concrete Sealer
(low VOC)
Dulux DureSeal
Acrylic Dust Sealer
Moisture resistant Dulux EnvirO2
plasterboard sealer Water Based Sealer
binder
Binder (low VOC)
Concrete and
Dulux Acrylic Sealer
masonry, latex
Undercoat eco
wallboard sealer,
choice (low VOC)
sealer/undercoat, Dulux 1 Step Acrylic
Primer Sealer
Undercoat (low
VOC)
Undercoat, solvent- Dulux 1 Step Oil
borne
Based Primer
Sealer Undercoat
Undercoat, latex:
Dulux 1 Step Acrylic
exterior
Primer Sealer
Undercoat (low
VOC)
Dulux Acratex
Water Based 501/1
Undercoat, latex:
Dulux 1 Step Acrylic
interior
Primer Sealer
Undercoat (low
VOC)
Dulux Acrylic Sealer
Undercoat eco
choice (low VOC)
Wood Stain - spirit Feast Watson
Prooftint
Wood Stain - oil
Cabots Interior
Stain
Feast Watson
Woodshield (int/ext)
Wood Stain - latex Cabots Woodcraft
Stain (interior) (low
VOC)
Intergrain Natural
Stain (exterior) (low
VOC)
Interior clear
Cabots Cabothane
varnish, solventGloss
based, one-pack
Cabots Cabothane
Satin
Cabots Stain &
Varnish (Satin)
NATSPEC (Oct 13)

0671 DULUX painting

Dulux PDS No.

AS/NZS
2311 PRN (Table
4.2)
B15

Standard

B15a

NE

DD1449

B15b

NE

DD1402

B16

DD0074
DA0442
DD0217

DD1187

AS 3730.22

DI1118

DD1192

DD1227

B17

AS 3730.14

DD1192

B17a

AS 3730.18

B17a

AS 3730.18

DW0729

B18a

NE

DW0661
DW1248

B18b

DW0662

B18c

NE

B19

AS 3730.25 or
AS 3730.27 (for
floors)

DD0441

DD1192
DD1402

DW0758

DW0669
DW0668
DW1292
DW1291
DW0737
6

[insert date]

FINISH

Paint type

Interior clear latex


varnish, waterbased, one-pack

Floor varnish,
solvent based,
clear (moisture
cure)
Floor Varnish,
water-based, onepack

0671 DULUX painting

DuluxGroup/Dulux
material
description
Cabots Stain &
Varnish (Gloss)
Feast Watson
Floorclear (Satin)
Feast Watson
Floorclear (Gloss)
Feast Watson Stain
& Varnish (Satin)
Feast Watson Stain
& Varnish (Gloss)
Feast Watson
Weatherproof
Feast Watson
Satinproof
Feast Watson
Flatproof
Intergrain Ultraclear
Interior Satin (low
VOC)
Intergrain Ultraclear
Interior Gloss (low
VOC)
Cabots Cabothane
Water Based (gloss
or satin) (low VOC)
Feast Watson
Floorproof

Intergrain Enviropro
Endure 1 Pack
(matt, satin or
gloss) (low VOC)
Floor varnish, clear Feast Watson
or tinted, two-pack EnviroMax (gloss,
semi gloss or low
sheen) (low VOC)

Dulux PDS No.

Standard

B19a

AS 3730.27

B20a

AS 3730.27

B20b

AS 3730.27

B22

AS 3730.16

B22a

AS 3730.16

B23#

AS 3730.28

B23a

NE

DW0736
DW1295
DW1294
DW0726
DW0727
DW0730

DW0762
DW0761
DW1491
DW1490

DW0732

DW1420
DW1419
DW1418

DW1312
DW1190
DW1038
DW1421
DW1422
Intergrain Enviropro DW1423
Endure
2 Pack (gloss, satin
or matt)
Exterior latex stain, Intergrain
DW0758
semi-transparent
NaturalStain (low
VOC)
Fence stain, latex Dulux
DD0055
paints, opaque
Weathershield
DW0660
Garden Shades
Cabots
Timbercolour
Exterior stain,
Cabots Deck &
DW1579
solvent-borne,
Exterior Stain
opaque
Exterior stain,
Feast Watson
DW1248
solvent-borne,
Woodshield (Int/Ext) DW1247
NATSPEC (Oct 13)

AS/NZS
2311 PRN (Table
4.2)

[insert date]

FINISH

Paint type

semi-transparent

Paving paint for


concrete, solvent
Paving paint for
concrete, latex
Roofing paint, latex
(Solar reflectance)

Intumescent paints

Epoxy paint, twopack, solvent-borne


topcoats, interior
only

Epoxy paint, twopack, solvent-borne


topcoats, exterior &
pools
Epoxy paint, twopack, water based,
interior only
High Build
Recoatable twopack, solvent-borne
gloss polyurethane
Stain sealer,
solvent-borne for
water soluble stains

0671 DULUX painting

DuluxGroup/Dulux
material
description
Feast Watson
Decking Stain
Cabots Deck &
Exterior Stain
Berger Jet Dry
Paving Paint range
Berger Jet Dry Aqua
Tread Satin
Dulux AcraTex 962
COOLROOF with
InfraCOOL
Technology
Refer to 0346
DULUX
Intumescent
coatings in
structural fire
protection coatings
Dulux Luxepoxy T
Enamel Finish
Dulux Durebild STE
2 Pak Epoxy (high
build & surface
tolerant)
Dulux Duremax
GPE Zinc
Phosphate
Dulux Duremax
GPE
Pool paints not
available from
Dulux

Dulux PDS No.

AS/NZS
2311 PRN (Table
4.2)

Standard

DD0081

B24

AS 3730.29

DD1163

B24a

NE

DA1471

B25

N/A

B28#

NE

DI1142
DI1109

B29

AS/NZS 3750.1

N/A

B29

AS/NZS 3750.1

Dulux Luxafloor
ECO2 (low VOC)

PC296

B29a

NE

Dulux Weathermax DI1156


HBR

B29c

NE

B30a

NE

Dulux PrepLock Oil


Based Stain Blocker
(low VOC)
Dulux Preplock
Shellac Stain
Blocker
Stain sealer, water Dulux PrepLock
based for oil stains Water Based Stain
Blocker (low VOC)
Chalk sealer,
Dulux Sealer Binder
surface conditioner Dulux Acraprime
Solvent Based
Primer
Anti-mould
Intergrain TSS
NATSPEC (Oct 13)

DW1579

DI1116
DI1115

DD1308
DD1309

DD1310

B30b

DD0074
DA0442

B31

NE

DW0768

B32

NE

[insert date]

FINISH

Paint type

(treatment or wash
for timber)
Water-repellent for
masonry
Creosote stain
Paint remover,
solvent-borne
Paint remover,
chemical
Bituminous paints
High build
membrane or
texture coatings for
masonry and
concrete: exterior
Texture finish latex
coatings for
masonry and
plasterboard:
interior only
Clear or colourless
coatings
(waterborne) for
timber, exterior

0671 DULUX painting

DuluxGroup/Dulux Dulux PDS No.


material
description

AS/NZS
2311 PRN (Table
4.2)

Standard

Dulux AquaBan

DD0002

B33

NE

No longer used
Selleys Pollystrippa
Paint Stripper
Selleys Polystrippa
Renovators Choice
No longer used
Dulux Acratex
Range

N/A
Poly

B35
B36a

NE
NE

Poly

B36b

NE

N/A
Acratex

B37
B38a

NE
AS/NZS 4548.1
AS/NZS 4548.2
AS/NZS 4548.3
AS/NZS 4548.4

B38b

NE

DW1401
DW1400

B39a

NE

DW0762
DW0761
DW0677
DW0678

B39b

NE

DW1420
DW1419
DW1418
DW1421
DW1422
DW1423
DW1312
DW1190
DW1038

B39c

AS 3730.27

DW0688
DW0744

B40

NE

DD1281

B41

NE

DD1282

B42

NE

Dulux Effects
Range (interior)

Intergrain UltraClear
Exterior
(gloss or satin)
Note: not suitable
for decking.
Clear coatings
Intergrain Ultraclear
(waterborne) for
Interior (gloss or
timber, interior
satin) (low VOC)
Cabots Crystal
Clear (gloss or
satin)
Clear or colourless Intergrain Enviropro
coatings
Endure
(waterborne) for
1 Pack (matt, satin
timber, interior
or gloss)
floors
(low VOC)
Intergrain Enviropro
Endure
2 Pack (gloss, satin
or matt)
Feast Watson
EnviroMax 2 Pack
(gloss, semi-gloss
or low sheen)
Sanding sealer

Semi-gloss latex,
interior trim (alt
B8b)
Gloss or full gloss
NATSPEC (Oct 13)

Cabots Universal
Sanding Sealer
Feast Watson
Sanding Sealer
Dulux Aquanamel
Semi-Gloss (low
VOC)
Dulux Aquanamel

[insert date]

FINISH

Paint type

DuluxGroup/Dulux
material
description
latex, interior trim
Gloss (low VOC)
Penetrating Tung
Feast Watson
Oil type varnish for Floorseal
timber floors:
Feast Watson China
interior
Wood Oil
Penetrating Tung
Intergrain Natures
Oil type varnish for Timber Oil
timber floors:
Feast Watson
exterior
Decking Oil
Intergrain
ULTRADECK (low
VOC)
Gloss pigmented
Dulux Luxathane R
polyurethane
Dulux Weathermax
HBR
Powder coatings
Dulux Powdercoat
for non-ferrous
Range
metals
Powder coatings
Dulux Powdercoat
for ferrous metals Range
(www.duluxpowders
.com.au)

0671 DULUX painting

Dulux PDS No.

AS/NZS
2311 PRN (Table
4.2)

Standard

DW0734
DW0733

B43a

NE

DW0769
DW1577
DW1285

B43b

NE

DD1137
DI1156

B44

AS/NZS 3750.6

B45a

AS 3715

B45b

AS 4506

Low VOC Compliance Reference table


Green Star Office v3
VOC Limits MAX g/litre DULUX Products
Product Type
compared to the GBCA
Specification
COMPLIANCE CRITERIA GBCA Specifications (obtain latest figures)
Walls and ceilings 16
Dulux Professional
Interior Semi-Gloss
Enviro2 Interior SemiGloss
Walls and ceilings 16
Dulux Wash & Wear 101
Interior Semi-Gloss
Advanced Semi Gloss
Dulux Wash & Wear
Kitchen & Bathroom
Semi Gloss
Walls and ceilings 16
Dulux Professional
Interior Low Sheen
Enviro2 Interior Low
Sheen
Walls and ceilings 16
Dulux Wash & Wear 101
Interior Low Sheen
Advanced Low Sheen
Dulux Wash & Wear
Kitchen & Bathroom Low
Sheen
Walls and ceilings
16
Dulux Professional
Interior Flat-Washable
Enviro2 Interior Flat
Walls and ceilings
16
Dulux Wash & Wear 101
Interior Flat-Washable
Advanced Flat
Ceilings - Interior Flat
14
Dulux Professional
Enviro2 Interior Flat
Ceilings - Interior Flat
14
Dulux White Ceiling
Paint eco choice
NATSPEC (Oct 13)

10

VOC g/litre Untinted

<1

<5
<5

<1

<5
<5

<1
<5
<1
<5

[insert date]

FINISH

Green Star Office v3


Product Type
Trim - Interior Gloss
Trim - Exterior Gloss
Trim - Interior Semigloss
Trim - Exterior Semi
Gloss
Trim - Exterior Low
Sheen
Timber Primer

Timber Primer

Binding Primer

0671 DULUX painting

VOC Limits MAX g/litre DULUX Products


compared to the GBCA
Specification
75
Dulux Aquanamel Gloss
75
Dulux Weathershield
Gloss Acrylic
75
Dulux Aquanamel Semi
Gloss
75
Dulux Weathershield
Semi Gloss Acrylic
75
Dulux Weathershield
Low Sheen Acrylic
30
Dulux Professional
Enviro2 Acrylic Sealer
Undercoat (ASU)
30
Dulux Acrylic Sealer
Undercoat eco choice
Dulux Professional
Enviro2 Acrylic Sealer
Undercoat (ASU)
30
Dulux Professional
EnvirO2 Water Based
Sealer Binder
60
Dulux Galvanised Iron
Primer

Latex primer for


galvanised iron and
zincalume
Latex primer for
60
galvanised iron and
zincalume
Interior Latex Undercoat 65

Interior Latex Undercoat 65


Exterior Latex Undercoat 65

Interior Sealer

65

Interior Sealer

65

One and two pack


140
performance coatings for
floors

EXECUTION

.3.1

PREPARATION

VOC g/litre Untinted

< 74
< 65
< 74
< 60
< 55
<1

<5
<1

<5

< 40

Dulux Quit Rust


Galvanised Iron Primer

< 60

Dulux Professional
Enviro2 Acrylic Sealer
Undercoat (ASU)
Dulux Acrylic Sealer
Undercoat eco choice
Dulux One Step Acrylic
Primer Sealer Undercoat
(PSU)
Dulux Professional
Enviro2 Acrylic Sealer
Undercoat (ASU)
Dulux Luxafloor Eco2
(clear)
Dulux Luxafloor Eco2
Feast Watson
EnviroMax Clear timber
finish

<1

<5
< 60

<1

< 10
< 10
< 100

Standards
General: To AS/NZS 2311 Sections 3.

NATSPEC (Oct 13)

11

[insert date]

FINISH

0671 DULUX painting

Order of work
Other trades: Before painting, complete the work of other trades as far as practicable within the area to
be painted, except for installation of fittings, floor sanding and laying flooring materials.
Clear finishes: Complete clear timber finishes before commencing opaque paint finishes in the same
area.
Protection
General: Before painting, clean the area and protect it against dust entry. Use drop sheets and
masking to protect finished surfaces or other surfaces at risk of damage during painting.
Fixtures: Remove door furniture, switch plates, light fittings and other fixtures before starting to paint,
and refix in position undamaged on completion of the painting.
Adjacent surfaces: Protect adjacent finished surfaces liable to damage from painting operations.
Wet paint warning
General: Place notices conspicuously and do not remove them until the paint is dry.
Repair
General: Clean off marks, paint spots and stains progressively and restore damaged surfaces to their
original condition. Touch up new damaged decorative paintwork or misses only with the paint batch
used in the original application.
Substrate preparation
General: Prepare all substrates to receive the painting systems in accordance with AS/NZS 2311 and
the paint manufacturers recommendations.
Cleaning: Clean down the substrate surface. Do not cause undue damage to the substrate or damage
to, or contamination of, the surroundings.
Filling: Fill cracks and holes with fillers, sealants, putties or grouting cements as appropriate for the
finishing system and substrate, and sand smooth.
Clear finish: Provide filler tinted to match the substrate.
Clear timber finish systems: Prepare the surface so that its attributes will show through the clear finish
without blemishes, by methods which may involve the following:
- Removal of bruises.
- Removal of discolourations, including staining by oil, grease and nailheads.
- Bleaching where necessary to match the timber colour sample.
- Puttying.
- Fine sanding (last abrasive no coarser than 220 grit) to show no scratches across the grain.
Iron and steel: Remove weld spatter, slag, burrs, or any other objectionable surface irregularities and
radius all edges to a minimum of 2 mm. Degrease by solvent or alkaline cleaning.
Iron and steel blast cleaning: To AS 1627.9 and to the class specified in the specified protective
treatment. Provide a surface roughness or profile appropriate for the specified treatment. Where
steelwork to be abrasive cleaned includes irregular shapes allow for special equipment to achieve
required abrasive cleaning.
Structural steel: All exposed fixings including bolts, screws and the like, are to be painted to match
adjacent steelwork paint system.
Concrete and masonry: Before application to very smooth concrete, brick or masonry, either acid etch,
mechanically grind or abrasive track blast the surface as appropriate to provide a suitable key for the
subsequently applied coating and to remove laitance. Remove loose friable matter before filling
surface discontinuities.
Set plaster surfaces: Do not apply solvent borne paint or other impervious coatings if the moisture
content at the surface, tested with a moisture meter, exceeds 12%.
Particular requirements
General: Prepare substrates as documented in the Preparation schedule.
Preparation schedule
Substrate
Preparation method
Applicable standard
e.g. Plasterboard
Dulux Duspec PPL008

NATSPEC (Oct 13)

12

[insert date]

FINISH

Surface preparation info table


Duspec Info Sheet
PAL047
PAS028
PAC002
PBK019
PCE007
PCT040
PCC050

0671 DULUX painting

PCB031
PCF010
PCF033

Substrate group
Aluminium for powdercoat
Asbestos
Autoclaved aerated concrete
Brick and blockwork
Cement render/premixed render
Ceramic tiles
Compressed fibre cement
sheeting
Chip board
Concrete floors/paths
Concrete floors/paths

PCK032
PTL017

Cork
Decorative tiles

PTI022
PFM056

Timber
Ferrous metals (mild steel, cast
iron)
Ferrous metals (mild steel, cast
iron)
Ferrous metals (mild Steel, cast
iron)
Fibre cement sheet (7.5 mm,
9 mm primed, 6 9 mm
Villaboard)
Fibreglass
Fibrous plaster, set plaster
Bituminous coatings
Glass reinforced concrete
Hardboard, masonite
Ferrous metals (mild steel, cast
iron)

PFM005
PFM009
PFC013

PFG016
PFP021
PBC030
PGC015
PHB045
PFM069

PFE071
PLX034
PMD020
PFO036
PNF004

PCO018
PPL008
PCS063

NATSPEC (Oct 13)

Substrate title
Aluminium for powdercoat
Asbestos
Autoclaved aerated concrete
Brick/blockwork masonry
Cement render/premixed render
Ceramic tiles un-glazed
CFC sheet (Hardiflex, Hardiplank,
CFC, Express wall, Villaboard)
Chip board
Concrete floors/paths acid etch
Concrete floors/paths
commercial and industrial
Cork floor tiles
Concrete tiles, slate tiles,
terracotta tiles, ceramic tiles,
terrazzo tiles
Dressed timber
External mild steel
commercial/industrial preparation
Ferrous metals minor domestic
Ferrous metals industrial power
tool cleaning
Fibre cement sheet

Fibreglass surface
Fibrous plaster
Flintkote Bituminous coatings
Glass reinforced concrete
Hardboard, masonite
Internal mild steel
commercial/industrial prep Class2
Abrasive Blast Clean
James Hardie Preprimed Fibre
James Hardie Preprimed Fibre
Cement Eave and Soffit Lining
Cement Eave & Soffit Lining
Laminates
Laminates
Medium density fibreboard
Medium density fibreboard
Expanded polystyrene system
Meshclad E.I.F.S (External
Insulated Finishing System)
Non ferrous metals
Non Ferrous Metal Surfaces
(aluminiums/alloys/brass/bronze/c Preparation
opper)
Concrete (off form, tilt up, preOff form, tilt up, pre-cast
cast)
Plaster products
Plaster products
Pre-coated sheet steel
Pre-coated sheet steel
(Colorbond, etc)
(Colorbond, etc)
13

[insert date]

FINISH

Duspec Info Sheet


PTO058
PPP043
PEA072
PPC011
PTI026
PPM068
PPF073
PRT038
PRT037
PRT039
PTI023
PSB067
PSL035
PTI003
PTI024
PTI025
PFC027

PVR061
PWP041
PZC012
PZS070

.3.2

0671 DULUX painting

Substrate group
Timber previously oiled/stained

Substrate title
Previously oiled/stained exterior
timber
Previously painted masonry
Previously painted masonry
surface
surface
Pebblecrete (exposed aggregate) Pebblecrete (exposed aggregate)
masonry
masonry
Plastics
Acrylic/polycarbonate/polystyrene/
polyurethane/PVC
Timber
Plyboard marine
Powder coated metals
Powder coated metals for painting
Polyurethane foam (Spray
Previously painted spray
Polyurethane Foam SPF)
polyurethane foam
Roof tiles
Roof tiles clay
Roof tiles
Roof tiles concrete
Roof tiles
Roof tiles metal
Timber
Rough sawn timber
Sandstone and blockwork
Sandstone/brick/blockwork
Slate flooring
Slate flooring
Timber
Timber
Timber
Timber flooring
Timber
Timber joinery/furniture
Fibre cement sheet (7.5 mm,
Fibre cement sheet (7.5 mm, 9
9 mm Primed, 6 9 mm with
mm with recessed edges)
recessed edges)
Vermiculite
Vermiculate
Wallpaper
Wallpaper
Zinc coated steel (galvanized
Zinc coated steel galvanized steel
iron, galvanized steel)
Zinc coated steel (zincalume,
Zincanneal
zincanneal, zincseal)

PAINTING

Standard
General: To AS/NZS 2311 Section 6.
Light levels
General: During preparation of surfaces, painting and inspection, maintain light levels such that the
luminance (photometric brightness) of the surface is equal to the specified permanent artificial
illumination conditions or 400 lux, whichever is the greater.
Substrate moisture content
Requirement: Use a moisture meter to demonstrate that the moisture content of the substrate is at or
below the recommended maximum level for the type of paint and the substrate material.
Paint application
General: Apply the first coat immediately after substrate preparation and before contamination of the
substrate can occur. Apply subsequent coats after the manufacturers recommended drying period has
elapsed.
Painting conditions
General: Do not paint in dusty conditions, or otherwise unsuitable weather as follows unless the paint
is suitable and recommended for such conditions:
- Relative humidity: > 85%.
- Surface temperature: < 10oC or > 35oC.
NATSPEC (Oct 13)

14

[insert date]

FINISH

0671 DULUX painting

Priming before fixing


General: Apply one coat of wood primer (2 coats to end grain) to the back of the following before fixing
in position:
- External fascia boards.
- Timber door and window frames.
- Bottoms of external doors.
- Associated trims and glazing beads.
- Timber board cladding.
Spraying
General: If the paint application is by spraying, use conventional or airless equipment which does the
following:
- Satisfactorily atomises the paint being applied.
- Does not require the paint to be thinned beyond the maximum amount recommended by the
manufacturer.
- Does not introduce oil, water or other contaminants into the applied paint.
Paint with known health hazards: Provide personal protection, masking, ventilation and screening
facilities generally to the standards set out for spray booths, AS/NZS 4114.1 and AS/NZS 4114.2.
Sanding
Clear finishes: Sand the sealer using the finest possible abrasive (no coarser than 320 grit) and avoid
cutting through the colour. Take special care with round surfaces and edges.
Repair of galvanizing
General: For galvanized surfaces which have been subsequently welded, power tool grind to remove
all rust and weld splatter. Remove all surface contaminants then immediately prime the affected area.
Primer: Organic zinc rich coating for the protection of steel is Dulux Zincannode 202. (AS/NZS 3750.9
Type 2).
Tinting
General: Tint each coat of an opaque coating system so that each has a noticeably different tint from
the preceding coat where possible, except for top coats in systems with more than one top coat.
Services
General: If not embedded, paint new services and equipment including in plant rooms, except
chromium, anodised aluminium, GRP, UPVC, stainless steel, non-metallic flexible materials and
normally lubricated machined surfaces. Repaint proprietary items only if damaged. Seek advice from
the manufacturer.
Windows
Operation: Ensure that opening windows function correctly before and after painting.
Door Leafs
Drying: Leave doors fixed open to allow drying. Do not allow door hardware, accessories or the like to
damage the door during the drying process.
Exclusions
Exclude the following surfaces from paint systems (unless specifically requested):
- Flexible duct connections, rubber hoses and mountings and other non metallic flexible fittings.
- Wire rope and machined surfaces.
- Metals plated or specially finished for appearance, bronze, brass, copper and stainless steel (except
as specified in the Pipe identification clause of the Services worksections).
- Aluminium frames.
- Prefinished aluminium frames to windows and doors, and trim.
- Metal floor duct covers.
- Raised access floors.
- Floors.
- Fair faced brickwork, blockwork, stonework, artificial stone and exposed aggregates.
- Sprayed vermiculite.
- Floors, paving, roads unless otherwise specified.
NATSPEC (Oct 13)

15

[insert date]

FINISH

0671 DULUX painting

Timber roof structure.


Concealed timber roof structure.
Timber ceiling and eaves lining.
Exterior timber sheeting.
Exterior timber stairs and decking.
Plastic finishes generally
Inside of service ducts, heat exchangers, pipes and valves.
Shower seats, store shelving, work benches.
Those parts of timber fixtures, such as insides of cupboards, not visible when doors are closed,
unless otherwise specified. Insides of bathroom cabinets are not excluded and shall be painted.
- Self-finished surface such as glass and plastic laminates.
- Door hardware, including hinges.
-

SELECTIONS

.4.1

PAINTING SCHEDULES GENERALLY

Paint system schedules


Requirement: Apply paint systems as documented in the Interior painting schedule and the Exterior
painting schedule.
General: Apply the paint system nominated for each substrate to the referenced manufacturers
Product Data Sheets (PDS) and Spec Sheets and include:
- The number and order of coats.
- The paint type for each coat.
Additional coats: Apply if necessary to:
- prepare porous or reactive substrates with prime or seal coats consistent with the manufacturer's
recommendations;
- achieve the total film thickness or texture specified; or
- achieve a satisfactory opacity, in the specified or required colour.
Painting systems
Standards: The scheduled DuluxGroup/Dulux paint systems override AS/NZS 2311 as follows:
- New unpainted interior surfaces: To AS/NZS 2311 Table 5.1.
- New unpainted exterior surfaces: To AS/NZS 2311 Table 5.2.
- Specialised painting systems: To AS/NZS 2311 clause 5.2 for the following final coats:
. High build textured or membrane finishes (B38 to AS/NZS 2311).
. 2 pack gloss pigmented polyurethane (B44 to AS/NZS 2311).
. 2 pack epoxy (B29 to AS/NZS 2311).
. 2 pack water based epoxy (B29A to AS/NZS 2311).
Paint Reference Number (PRN): The number in brackets against the individual product refers to the
Paint Ref. No. (PRN) listed in the DuluxGroup/Dulux paint type reference table (See PRODUCTS)
and AS/NZS 2311 Appendix D.
.4.2

INTERIOR PAINTING SCHEDULE

Flat and matt latex: Interior


Substrate
1st coat

2nd coat

3rd coat

Plasterboard
(low VOC system)

Dulux Wash &


Wear 101 Adv Flat
(B6b)
Dulux White Ceiling
Paint eco choice
(B6c)
Dulux Wash &

Dulux Wash &


Wear 101 Adv Flat
(B6b)
Dulux White Ceiling SD 0010
Paint eco choice
(B6c)
Dulux Wash &
SD 07468

NATSPEC (Oct 13)

16

Dulux Acrylic
Sealer Undercoat
eco choice (B16)
Plasterboard
Dulux Acrylic
(ceilings)
Sealer Undercoat
(low VOC system) eco choice (B16)
Fibrous/set plaster Dulux Sealer

Manufacturers
Spec Sheet Ref
SD 0001

[insert date]

FINISH

Substrate

0671 DULUX painting

1st coat

Binder (solvent
based) (B15)
Fibrous/set plaster Dulux Professional
(with glancing light Oil Based
issues)
Undercoat (B15)
Fibre cement
Dulux Acrylic
products
Sealer Undercoat
(low VOC system) eco choice (B16)
Timber and
Dulux 1 Step
veneers
Acrylic Primer
Sealer Undercoat
(B10a)
Concrete
Dulux Acrylic
(low VOC system) Sealer Undercoat
eco choice (B16)
Cement render
Dulux 1 Step
(low VOC system) Acrylic Primer
Sealer Undercoat
(B10a)
Vermiculite
Dulux Sealer
Binder (solvent
based) (B15)
Low gloss latex - Interior
Substrate
1st coat
Plasterboard
(low VOC system)

Dulux Acrylic
Sealer Undercoat
eco choice (B16)
Fibrous/set plaster Dulux Sealer
Binder (solvent
based) (B15)
Fibre cement
Dulux Acrylic
products
Sealer Undercoat
(low VOC system) eco choice (B16)
Timber and
Dulux 1 Step
veneers
Acrylic Primer
Sealer Undercoat
(B10a)
Concrete
Dulux Acrylic
(low VOC system) Sealer Undercoat
eco choice (B16)
Cement render
Dulux 1 Step
(low VOC system) Acrylic Primer
Sealer Undercoat
(B16)
MDF
Dulux 1 Step
Acrylic Primer
Sealer Undercoat
(B10a)
Brick and masonry Dulux Acrylic
(low VOC system) Sealer Undercoat
eco choice (B16)
NATSPEC (Oct 13)

2nd coat

3rd coat

Manufacturers
Spec Sheet Ref

Wear 101 Adv Flat


(B6b)
Dulux Professional
Matt Acrylic (B6a)

Wear 101 Adv Flat


(B6b)
Dulux Professional SD 2172
Matt Acrylic (B6a)

Dulux Wash &


Wear 101 Adv Flat
(B6b)
Dulux Wash &
Wear 101 Adv Flat
(B6b)

Dulux Wash &


Wear 101 Adv Flat
(B6b)
Dulux Wash &
Wear 101 Adv Flat
(B6b)

SD 3174

Dulux Wash &


Wear 101 Adv Flat
(B6b)
Dulux Wash &
Wear 101 Adv Flat
(B6b)

Dulux Wash &


Wear 101 Adv Flat
(B6b)
Dulux Wash &
Wear 101 Adv Flat
(B6b)

SD 1430

SD 3147

SD 3665

Dulux White Ceiling Dulux White Ceiling SD 3505


Paint eco choice
Paint eco choice
(B6c)
(B6c)

2nd coat

3rd coat

Manufacturers
Spec Sheet Ref
SD 0002

Dulux Wash &


Wear 101 Adv Low
Sheen (B7b)
Dulux Wash &
Wear 101 Adv Low
Sheen (B7b)
Dulux Wash &
Wear 101 Adv Low
Sheen (B7b)
Dulux Wash &
Wear 101 Adv Low
Sheen (B7b)

Dulux Wash &


Wear 101 Adv Low
Sheen (B7b)
Dulux Wash &
SD 0813
Wear 101 Adv Low
Sheen (B7b)
Dulux Wash &
SD 2971
Wear 101 Adv Low
Sheen (B7b)
Dulux Wash &
SD 1528
Wear 101 Adv Low
Sheen (B7b)

Dulux Wash &


Wear 101 Adv Low
Sheen (B7b)
Dulux Wash &
Wear 101 Adv Low
Sheen (B7b)

Dulux Wash &


SD 0901
Wear 101 Adv Low
Sheen (B7b)
Dulux Wash &
SD 1128
Wear 101 Adv Low
Sheen (B7b)

Dulux Wash &


Dulux Wash &
SD 1041
Wear 101 Adv Low Wear 101 Adv Low
Sheen (B7b)
Sheen (B7b)
Dulux Wash &
Dulux Wash &
SD 3284
Wear 101 Adv Low Wear 101 Adv Low
Sheen (B7b)
Sheen (B7b)
17

[insert date]

FINISH

Substrate

0671 DULUX painting

1st coat

Concrete blockwork Berger Gold Label


(low VOC system) Acrylic Block Filler
(B15)

2nd coat

Dulux Wash &


Dulux Wash &
Wear 101 Adv Low Wear 101 Adv Low
Sheen (B7b)
Sheen (B7b)

Low gloss latex (mould resistant) Interior


Substrate
1st coat
2nd coat
Plasterboard
(low VOC system)

3rd coat

Dulux Wash &


Wear Kitchen &
Bathroom Low
Sheen (B7b)
Plasterboard (MR Dulux Professional Dulux Wash &
grade)
EnvirO2 Water
Wear Kitchen &
(low VOC system) Based Sealer
Bathroom Low
Binder (B15)
Sheen (B7b)
Fibrous/set plaster Dulux Sealer
Dulux Wash &
Binder (solvent
Wear Kitchen &
based) (B15)
Bathroom Low
Sheen (B7b)
Fibre cement
Dulux Acrylic
Dulux Wash &
products
Sealer Undercoat Wear Kitchen &
(low VOC system) eco choice (B16)
Bathroom Low
Sheen (B7b)
Concrete
Dulux Sealer
Dulux Wash &
Binder (solvent
Wear Kitchen &
based) (B15)
Bathroom Low
Sheen (B7b)
Cement render
Dulux 1 Step
Dulux Wash &
(low VOC system) Acrylic Primer
Wear Kitchen &
Sealer Undercoat Bathroom Low
(B16)
Sheen (B7b)
MDF
Dulux 1 Step
Dulux Wash &
Acrylic Primer
Wear Kitchen &
Sealer Undercoat Bathroom Low
(B10a)
Sheen (B7b)
Brick and masonry Dulux Acrylic
Dulux Wash &
(low VOC system) Sealer Undercoat Wear Kitchen &
eco choice (B16)
Bathroom Low
Sheen (B7b)
Concrete blockwork Berger Gold Label Dulux Wash &
(low VOC system) Acrylic Block Filler Wear Kitchen &
(B15)
Bathroom Low
Sheen (B7b)

Dulux Wash &


Wear Kitchen &
Bathroom Low
Sheen (B7b)
Dulux Wash &
Wear Kitchen &
Bathroom Low
Sheen (B7b)
Dulux Wash &
Wear Kitchen &
Bathroom Low
Sheen (B7b)
Dulux Wash &
Wear Kitchen &
Bathroom Low
Sheen (B7b)
Dulux Wash &
Wear Kitchen &
Bathroom Low
Sheen (B7b)
Dulux Wash &
Wear Kitchen &
Bathroom Low
Sheen (B7b)
Dulux Wash &
Wear Kitchen &
Bathroom Low
Sheen (B7b)
Dulux Wash &
Wear Kitchen &
Bathroom Low
Sheen (B7b)
Dulux Wash &
Wear Kitchen &
Bathroom Low
Sheen (B7b)

Semi gloss latex: Interior


Substrate
1st coat

2nd coat

3rd coat

Dulux Wash &


Wear 101 Adv
Semi Gloss (B8b)
Dulux Wash &
Wear 101 Adv
Semi Gloss (B8b)

Dulux Wash &


Wear 101 Adv
Semi Gloss (B8b)
Dulux Wash &
Wear 101 Adv
Semi Gloss (B8b)

Plasterboard
(low VOC system)

Dulux Acrylic
Sealer Undercoat
eco choice (B16)

3rd coat

Dulux Acrylic
Sealer Undercoat
eco choice (B16)
Fibrous/set plaster Dulux Sealer
Binder (solvent
based) (B15)

NATSPEC (Oct 13)

18

Manufacturers
Spec Sheet Ref
SD 1027

Manufacturers
Spec Sheet Ref
SD 5013

SD 4611

SD 5008

SD 4543

SD 5009

SD 5010

SD 5011

SD 5018

SD1027

Manufacturers
Spec Sheet Ref
SD 0003

SD 0815

[insert date]

FINISH

Substrate

0671 DULUX painting

1st coat

Fibre cement
products
(low VOC system)
Timber and
veneers

Dulux Acrylic
Sealer Undercoat
eco choice (B16)
Dulux 1 Step
Acrylic Primer
Sealer Undercoat
(B17a)
Concrete
Dulux Acrylic
(low VOC system) Sealer Undercoat
eco choice (B16)
Cement render
Dulux
(low VOC system) Acrylic Sealer
Undercoat eco
choice (B16)
MDF
Dulux 1 Step
(low VOC system) Acrylic Primer
Sealer Undercoat
(B17a)
Brick and masonry Dulux Acrylic
(low VOC system) Sealer Undercoat
eco choice (B16)
Concrete blockwork Berger Gold Label
(low VOC system) Acrylic Block Filler
(B15)

2nd coat

3rd coat

Dulux Wash &


Wear 101 Adv
Semi Gloss (B8b)
Dulux Wash &
Wear 101 Adv
Semi Gloss (B8b)

Dulux Wash &


Wear 101 Adv
Semi Gloss (B8b)
Dulux Wash &
Wear 101 Adv
Semi Gloss (B8b)

Dulux Wash &


Wear 101 Adv
Semi Gloss (B8b)
Dulux Wash &
Wear 101 Adv
Semi Gloss (B8b)

Dulux Wash &


Wear 101 Adv
Semi Gloss (B8b)
Dulux Wash &
Wear 101 Adv
Semi Gloss (B8b)

SD 1065

Dulux Wash &


Wear 101 Adv
Semi Gloss (B8b)

Dulux Wash &


Wear 101 Adv
Semi Gloss (B8b)

SD 3615

Dulux Wash &


Wear 101 Adv
Semi Gloss (B8b)
Dulux Wash &
Wear 101 Adv
Semi Gloss (B8b)

Dulux Wash &


Wear 101 Adv
Semi Gloss (B8b)
Dulux Wash &
Wear 101 Adv
Semi Gloss (B8b)

SD 0678

3rd coat

Manufacturers
Spec Sheet Ref
SD 4848

Semi gloss latex (mould resistant): Interior


Substrate
1st coat
2nd coat
Plasterboard
(low VOC system)

Dulux Wash &


Wear Kitchen &
Bathroom Semi
Gloss (B8b)
Plasterboard (MR Dulux Professional Dulux Wash &
grade)
EnvirO2 Water
Wear Kitchen &
(low VOC system) Based Sealer
Bathroom Semi
Binder (B15b)
Gloss (B8b)
Fibrous/set plaster Dulux Sealer
Dulux Wash &
Binder (solvent
Wear Kitchen &
based) (B15)
Bathroom Semi
Gloss (B8b)
Fibre cement
Dulux Acrylic
Dulux Wash &
products
Sealer Undercoat Wear Kitchen &
(low VOC system) eco choice (B16)
Bathroom Semi
Gloss (B8b)
Concrete
Dulux Acrylic
Dulux Wash &
(low VOC system) Sealer Undercoat Wear Kitchen &
eco choice (B15)
Bathroom Semi
Gloss (B8b)
Cement render
Dulux 1 Step
Dulux Wash &
(low VOC system) Acrylic Primer
Wear Kitchen &
Sealer Undercoat Bathroom Semi
(B17a)
Gloss (B8b)
MDF
Dulux 1 Step
Dulux Wash &
Acrylic Primer
Wear Kitchen &
NATSPEC (Oct 13)

Dulux Acrylic
Sealer Undercoat
eco choice (B16)

19

Dulux Wash &


Wear Kitchen &
Bathroom Semi
Gloss (B8b)
Dulux Wash &
Wear Kitchen &
Bathroom Semi
Gloss (B8b)
Dulux Wash &
Wear Kitchen &
Bathroom Semi
Gloss (B8b)
Dulux Wash &
Wear Kitchen &
Bathroom Semi
Gloss (B8b)
Dulux Wash &
Wear Kitchen &
Bathroom Semi
Gloss (B8b)
Dulux Wash &
Wear Kitchen &
Bathroom Semi
Gloss (B8b)
Dulux Wash &
Wear Kitchen &

Manufacturers
Spec Sheet Ref
SD 0903

SD 3410

SD 4804

SD 2797

SD 4581

SD 5014

SD 4512

SD 4522

SD 5015

SD 5016

[insert date]

FINISH

Substrate

0671 DULUX painting

1st coat

Sealer Undercoat
(B17a)
Brick and masonry Dulux Acrylic
(low VOC system) Sealer Undercoat
eco choice (B16)
Concrete blockwork Berger Gold Label
(low VOC system) Acrylic Block Filler
(B15)

2nd coat

3rd coat

Bathroom Semi
Gloss (B8b)
Dulux Wash &
Wear Kitchen &
Bathroom Semi
Gloss (B8b)
Dulux Wash &
Wear Kitchen &
Bathroom Semi
Gloss (B8b)

Bathroom Semi
Gloss (B8b)
Dulux Wash &
Wear Kitchen &
Bathroom Semi
Gloss (B8b)
Dulux Wash &
Wear Kitchen &
Bathroom Semi
Gloss (B8b)

Semi gloss water based enamel: Interior


Substrate
1st coat
2nd coat
Plasterboard

Plasterboard (MR
grade)

Fibrous/set plaster

Fibre cement
products
Timber and
veneers
(low VOC system)
Concrete

Cement render

MDF
(low VOC system)
Brick and masonry

Concrete blockwork

Zinc coated metals


(incl. HD
galvanized steel,
zincalume,
Galvabond,
zincanneal,
zincseal, zincprimed steel)
NATSPEC (Oct 13)

Dulux Acrylic
Sealer Undercoat
eco choice (B16)
Dulux Professional
EnvirO2 Water
Based Sealer
Binder (B15b)
Dulux Sealer
Binder (solvent
based) (B15)
Dulux Acrylic
Sealer Undercoat
eco choice (B16)
Dulux Acrylic
Sealer Undercoat
eco choice (B17a)
Dulux Acrylic
Sealer Undercoat
eco choice (B17a)
Dulux 1 Step
Acrylic Primer
Sealer Undercoat
(B17a)
Dulux Acrylic
Sealer Undercoat
eco choice (B17a)
Dulux Acrylic
Sealer Undercoat
eco choice (B16)
Berger Gold Label
Acrylic Block Filler
(B15)
Dulux Quit Rust All
Metal Primer (water
based) (B12a)

3rd coat

Manufacturers
Spec Sheet Ref

SD 5017

SD 5019

Manufacturers
Spec Sheet Ref
SD 2591

Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)

Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel SD 4672
Semi Gloss Acrylic
(B8b)

Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)

Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)

SD 3058

Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)

Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)

SD 2294

20

SW 5020

SD 2295

SD 5021

SD 5022

SD 5026

SD 5045

SD 5023

[insert date]

FINISH

Substrate
(low VOC system)
Shop primed or red
oxide primed
(ROZP) ferrous
metal
(low VOC system)
Non-ferrous metals
(incl. aluminium,
brass, copper, tin
plate)
(low VOC system)
Plastics (solvent
resistant types e.g.
FRP, UPVC)
(low VOC system)

0671 DULUX painting

1st coat

2nd coat

3rd coat

Dulux Quit Rust All Dulux Aquanamel Dulux Aquanamel SD 4576


Metal Primer (water Semi Gloss Acrylic Semi Gloss Acrylic
based) (B11a)
(B8b)
(B8b)

Dulux Quit Rust


All Metal Primer
(water based)
(B17a)

Dulux Aquanamel Dulux Aquanamel SD 5024


Semi Gloss Acrylic Semi Gloss Acrylic
(B8b)
(B8b)

Dulux PrepLock
Water based Stain
Blocker (B17a)

Dulux Aquanamel Dulux Aquanamel SD 5025


Semi Gloss Acrylic Semi Gloss Acrylic
(B8b)
(B8b)

Semi gloss, solvent-borne - Interior


Substrate
1st coat
Timber and primed Dulux 1 Step Oil
hardboard veneers Based Primer
Sealer Undercoat
(solvent based)
(B17)
MDF
Dulux Professional
Total Prep (B17a)

2nd coat

3rd coat

Dulux Super
Dulux Super
Enamel Semi Gloss Enamel Semi Gloss
(B3)
(B3)

Dulux Super
Enamel Semi Gloss
(B3)
Zinc coated metals Dulux Quit Rust All Dulux Super
(incl. HD
Metal Primer (water Enamel Semi Gloss
galvanized steel,
based) (B12a)
(B3)
zincalume,
Galvabond,
zincanneal,
zincseal, zincprimed steel)
Shop primed or red Spot Prime with
Dulux Super
oxide primed
Dulux Quit Rust All Enamel Semi Gloss
(ROZP) ferrous
Metal Primer (B11) (B3)
metal.
Non-ferrous metals Dulux Quit Rust
Dulux Super
(incl. aluminium,
Metal-Etch Primer Enamel Semi Gloss
brass, copper, tin
(B13)
(B3)
plate)
Plastics (solvent
Dulux PrepLock
Dulux Super
resistant types e.g. Water based Stain Enamel Semi Gloss
FRP, UPVC)
Blocker (B17a)
(B3)
Plastics (solvent
Dulux PrepLock
Dulux Aquanamel
sensitive types e.g. Water based Stain Semi Gloss Acrylic
polystyrene)
Blocker (B17a)
(B8b)

Dulux Super
SD 2171
Enamel Semi Gloss
(B3)
Dulux Super
SD 3337
Enamel Semi Gloss
(B3)
Dulux Super
SD 3340
Enamel Semi Gloss
(B3)
Dulux Aquanamel SD 3356
Semi Gloss Acrylic
(B8b)

3rd coat

Plasterboard

Dulux Aquanamel

Dulux Acrylic

Dulux Aquanamel
21

Manufacturers
Spec Sheet Ref
SD 0041

Dulux Super
SD 4855
Enamel Semi Gloss
(B3)
Dulux Super
SD 1764
Enamel Semi Gloss
(B3)

Full gloss water based enamel: Interior


Substrate
1st coat
2nd coat

NATSPEC (Oct 13)

Manufacturers
Spec Sheet Ref

Manufacturers
Spec Sheet Ref
SD 0990
[insert date]

FINISH

Substrate

Plasterboard (MR
grade)

Fibrous/set plaster

Fibre cement
products
Timber and
veneers
(low VOC system)
Concrete

Cement render

MDF
(low VOC system)
Brick and masonry

Concrete blockwork

Zinc coated metals


(incl. HD
galvanized steel,
zincalume,
Galvabond,
zincanneal,
zincseal, zincprimed steel)
(low VOC system)
Shop primed or red
oxide primed
(ROZP) ferrous
metal
(low VOC system)
Non-ferrous metals
(incl. aluminium,
brass, copper, tin
plate)
(low VOC system)
Plastics (solvent
resistant types e.g.
FRP, UPVC)
(low VOC system)
NATSPEC (Oct 13)

0671 DULUX painting

1st coat

2nd coat

3rd coat

Manufacturers
Spec Sheet Ref

Sealer Undercoat
eco choice (B16)
Dulux Professional
EnvirO2 Water
Based Sealer
Binder (B15b)
Dulux Sealer
Binder (solvent
based) (B15)
Dulux Acrylic
Sealer Undercoat
eco choice (B16)
Dulux Acrylic
Sealer Undercoat
eco choice (B17a)
Dulux Acrylic
Sealer Undercoat
eco choice (B16)
Dulux 1 Step
Acrylic Primer
Sealer Undercoat
(B17a)
Dulux Acrylic
Sealer Undercoat
eco choice (B17a)
Berger Gold Label
Acrylic Block Filler
(B15)
Berger Gold Label
Acrylic Block Filler
(B15)
Dulux Quit Rust All
Metal Primer (water
based) (B12a)

Gloss Acrylic (B42)


& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)

Gloss Acrylic (B42)


& (B9)
Dulux Aquanamel SD 4853
Gloss Acrylic (B42)

Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)

Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)

SD 2548

Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)

Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)

SD 2290

SD 5027

SD 2291

SD 5028

SD 2263

SD 1522

SD 1522

SD 5029

Dulux Quit Rust All Dulux Aquanamel Dulux Aquanamel SD 4603


Metal Primer (water Gloss Acrylic (B42) Gloss Acrylic (B42)
based) (B11a)
& (B9)
& (B9)

Dulux Quit Rust All Dulux Aquanamel Dulux Aquanamel SD 5030


Metal Primer (water Gloss Acrylic (B42) Gloss Acrylic (B42)
based) (B17a)
& (B9)
& (B9)

Dulux PrepLock
Water based Stain
Blocker (B17a)

Dulux Aquanamel Dulux Aquanamel SD 5031


Gloss Acrylic (B42) Gloss Acrylic (B42)
& (B9)
& (B9)

22

[insert date]

FINISH

0671 DULUX painting

Full gloss, solvent-borne Interior


Substrate
1st coat
Timber and primed Dulux 1 Step Oil
hardboard veneers Based Primer
Sealer Undercoat
(B17)
MDF (interior only) Dulux 1 Step
Acrylic Primer
Undercoat (B17a)
Zinc coated metals Dulux Quit Rust All
(incl. HD
Metal Primer
galvanized steel,
(B12a) # Apply 2
zincalume,
coats #
Galvabond,
zincanneal,
zincseal, zincprimed steel)
Shop primed or red Spot Prime with
oxide primed
Quit Rust All Metal
(ROZP) ferrous
Primer (B11)
metal.
Non-ferrous metals Dulux PrepLock
(incl. aluminium,
Water based Stain
brass, copper, tin
Blocker (B11)
plate)
Plastics (solvent
Dulux PrepLock
resistant types e.g. Water based Stain
FRP, UPVC)
Blocker (B17a)
Plastics (solvent
Dulux PrepLock
sensitive types e.g. Water based Stain
polystyrene)
Blocker (B17a)

2nd coat

Dulux Super
Dulux Super
Enamel High Gloss Enamel High Gloss
(B5)
(B5)
Dulux Super
Enamel High Gloss
(B5)
Dulux Super
Enamel High Gloss
(B5)

Manufacturers
Spec Sheet Ref
SD 0039

Dulux Super
SD 1168
Enamel High Gloss
(B5)
Dulux Super
SD 0381
Enamel High Gloss
(B5)

Dulux Super
Dulux Super
SD 5069
Enamel High Gloss Enamel High Gloss
(B5)
(B5)
Dulux Super
Dulux Super
SD 3451
Enamel High Gloss Enamel High Gloss
(B5)
(B5)
Dulux Super
Enamel High Gloss
(B5)
Use water based
paints, not solvent
based.

Full gloss, epoxy primed enamel - Interior


Substrate
1st coat
2nd coat
Zinc coated metals
(incl. HD
Galvanized steel,
zincalume,
Galvabond,
zincanneal,
zincseal, zincprimed steel)

3rd coat

Dulux Duremax
Dulux Duraflex 2
GPE Zinc
High Gloss (B5)
Phosphate to 125
microns DFT (B29)

Dulux Super
SD 0385
Enamel High Gloss
(B5)
Use water based
N/A
paints, not solvent
based.

3rd coat
Dulux Duraflex 2
High Gloss (B5)

Manufacturers
Spec Sheet Ref
SI 5469

Full gloss, epoxy primed two pack Polyurethane - Interior


Substrate
1st coat
2nd coat
3rd coat
Zinc coated metals
(incl. HD
Galvanized steel,
zincalume,
Galvabond,
zincanneal,
zincseal, zincprimed steel)
NATSPEC (Oct 13)

Dulux Duremax
GPE Zinc
Phosphate to 125
microns DFT (B29)

Manufacturers
Spec Sheet Ref
Dulux Duremax
Dulux Weathermax SI 3359
GPE to 100
HBR to 75 microns
microns DFT (B29) DFT (B29c)

23

[insert date]

FINISH

0671 DULUX painting

Clear over stain on timber or veneers - Interior


Substrate
1st coat
2nd coat
Timber and timber
veneer (solvent
based system)
Timber and timber
veneer (low VOC
water based
system)

Manufacturers
Spec Sheet Ref
Cabots Cabothane Cabots Cabothane Cabots Cabothane SW 1219 (gloss)
(solvent based)
(solvent based)
(solvent based)
-or(B19) Gloss or
(B19) Gloss or
(B19) Gloss or
SW 1202 (satin)
Satin
Satin
Satin
Cabots Woodcraft Cabots Cabothane Cabots Cabothane SW 5000
Stain (B18c)
Water Based
Water Based
(B19a) Gloss or
(B19a) Gloss or
Satin
Satin

Gloss level required: [complete/delete]


Clear coat 2 pack polyurethane - Interior
Substrate
1st coat
2nd coat
Timber
(low VOC water
based system)
Timber
(low VOC water
based system)
Timber
(low VOC water
based system)

Intergrain Enviropro Intergrain Enviropro


Timberseal (B20b) Endure 2 Pack Matt
(B20b)
Intergrain Enviropro Intergrain Enviropro
Timberseal (B20b) Endure 2 Pack
Satin (B20b
Intergrain Enviropro Intergrain Enviropro
Timberseal (B20b) Endure 2 Pack
Gloss (B20b)

Clear coat single pack polyurethane - Interior


Substrate
1st coat
2nd coat
Timber and timber
veneer (low VOC
water based
system)
Timber and timber
veneer (solvent
based system)

Intergrain Ultraclear
(B39b) Gloss or
Satin Apply
10.8 m2/litre
Feast Watson
Satinproof (solvent
based) (B19)

3rd coat

3rd coat

Manufacturers
Spec Sheet Ref
Intergrain Enviropro SW 4102
Endure 2 Pack Matt SW 4050
(B20b)
Intergrain Enviropro SW 4243
Endure 2 Pack
Satin (B20b)
Intergrain Enviropro SW 3991
Endure 2 Pack
Gloss (B20b)

3rd coat

Manufacturers
Spec Sheet Ref
SW 3925 (gloss)
or
SW 3927 (satin)

Intergrain Ultraclear
(B39b) Gloss or
Satin Apply
10.8 m2/litre
Feast Watson
(Optional)
SW 1244
Satinproof (solvent Feast Watson
based) (B19)
Satinproof (solvent
based) (B19)

Two pack gloss pigmented polyurethane- Interior joinery


Substrate
1st coat
2nd coat
3rd coat
Timber
(all shop applied)

Dulux Luxepoxy 4
White Primer
(B29B) to 50
microns DFT.

Manufacturers
Spec Sheet Ref
Dulux Luxathane R Dulux Luxathane R SD 1751
(B44) to 60 microns (B44) to 60 microns
DFT.
DFT.

Clear finishing oils for timber - Interior


Substrate
1st coat
2nd coat
Timber

Timber

NATSPEC (Oct 13)

Feast Watson
Scandinavian Oil
Apply at 16 m2/litre
Feast Watson Tung
Oil (B43a) Apply
12-14 m2/litre

Feast Watson
Scandinavian Oil
Apply at 16 m2/litre
Feast Watson Tung
Oil (B43a) Apply
12-14 m2/litre
24

3rd coat

Manufacturers
Spec Sheet Ref
SW 1257

SW 1258

[insert date]

FINISH

0671 DULUX painting

Tung oil (Semi gloss finish) - Interior (Timber floors)


Substrate
1st coat
2nd coat

3rd coat

Manufacturers
Spec Sheet Ref
Feast Watson Tung Feast Watson Tung SW 1313
Oil (Commercial)
Oil (Commercial)

Timber (soft wood) Feast Watson


Maxiprime
Apply 8-9 m2/litre
Timber (hardwood) Feast Watson
Feast Watson Tung Feast Watson Tung SW 1313
Maxiprime
Oil (Commercial)
Oil (Commercial)
Apply 10-11 m2/litre
Clear single pack polyurethane - Interior (Timber floors)
Substrate
1st coat
2nd coat
Timber (floors)
(low VOC water
based system)

Timber (floors)

Manufacturers
Spec Sheet Ref
Intergrain Enviropro Intergrain Enviropro Intergrain Enviropro SW4012 (gloss)
Endure 1 (B39c)
Endure 1 (B39c)
Endure 1 (B39c)
or
Gloss, Satin or Matt Gloss, Satin or Matt Gloss, Satin or Matt SW4014 (satin)
or
SW4016 (matt)
Feast Watson
Feast Watson
Feast Watson
SW 1332
Floorproof (solvent Floorproof (solvent Floorproof (solvent
based) (B20a)
based) (B20a)
based) (B20a)
Gloss or Satin
Gloss or Satin
Gloss or Satin

Paving paint for concrete Interior or exterior


Substrate
1st coat
2nd coat
Concrete
(solvent based
system)
Concrete
(low VOC, water
based system)

Berger Jet Dry


Non-Slip Paving
Paint (B24)
Berger Jet Dry
Aqua Tread Satin
(B24A)

Berger Jet Dry


Non-Slip Paving
Paint (B24)
Berger Jet Dry
Aqua Tread Satin
(B24A)

Clear sealer for concrete Interior or Exterior


Substrate
1st coat
2nd coat
Concrete
(domestic)
(low VOC, water
based system)
Concrete
(commercial) (low
VOC, water based
system)
Concrete
(commercial)
(water based
system)
Concrete
(commercial)
(solvent based
system)

NATSPEC (Oct 13)

Berger Jet Dry


Aqua Tread Satin
(B15a)

Berger Jet Dry


Aqua Tread Satin
(B15a)

Dulux Luxafloor
ECO2 (B29a)

Dulux Luxafloor
ECO2 (B29a)

Dulux 956/1
Acraglaze (B15a)
(Interior only)

Dulux 956/1
Acraglaze (B15a)
(Interior only)

Dulux Dureseal
ACS (B15a)

Dulux Dureseal
ACS (B15a)

25

3rd coat

3rd coat
Berger Jet Dry
Non-Slip Paving
Paint (B24)

Manufacturers
Spec Sheet Ref
SD 0643

SD 1145

3rd coat
Berger Jet Dry
Aqua Tread Satin
(B15a)

Manufacturers
Spec Sheet Ref
SD 1145

SI 3030

(Optional)
Dulux 956/1
Acraglaze (B15a)
(Interior only)

SA 2589

SI 1574

[insert date]

FINISH

0671 DULUX painting

Previously painted surfaces - Interior


Primer: [complete/delete]
Sealer: [complete/delete]
Undercoat: [complete/delete]
Substrate

1st coat

2nd coat

e.g. Painted
Plasterboard

Dulux ASU (B16)

Dulux Wash &


Dulux Wash &
Wear 101 Adv Low Wear 101 Adv Low
Sheen (B7b)
Sheen (B7b)

.4.3

3rd coat

Manufacturers
Spec Sheet Ref
SD 07451

EXTERIOR PAINTING SCHEDULES

Low gloss latex Exterior


Substrate
1st coat
Weatherboard
-hardboard
cladding
(Weathertex)
Weatherboard
-fibre cement board
cladding
(Hardiboard)
Fibre cement
products

3rd coat

Dulux
Dulux
Dulux
Weathershield Low Weathershield Low Weathershield Low
Sheen Acrylic (B7a) Sheen Acrylic (B7a) Sheen Acrylic (B7a)

Manufacturers
Spec Sheet Ref
SD 0035

Dulux
Dulux
Dulux
SD 2539
Weathershield Low Weathershield Low Weathershield Low
Sheen Acrylic (B7a) Sheen Acrylic (B7a) Sheen Acrylic (B7a)

Dulux
Weathershield Low
Sheen Acrylic (B7a)
Timber and
Dulux
veneers
Weathershield Low
Sheen Acrylic (B7a)
Concrete (OFC, tilt Dulux
slab or pre-cast)
Weathershield Low
Sheen Acrylic (B7a)
Concrete (OFC, tilt Dulux AcraPrime
slab or pre-cast)
501/1 Water Based
(High-build
Primer (B15)
performance
coating system)
Cement render
Dulux AcraPrime
(High-build
501/1 Water Based
performance
Primer (B15)
coating system)
Clay brick and
Dulux
masonry
Weathershield Low
Sheen Acrylic (B7a)
Concrete blockwork Berger Gold Label
Acrylic Blockfiller
(B15)
Concrete blockwork Dulux AcraPrime
(High-build
501/1 Water Based
performance
Primer (B15)
coating system)
Zinc coated metals Dulux
(incl. Zincalume,
Weathershield Low
Galvabond,
Sheen Acrylic (B7a)
Zincanneal,
zincseal, zinc NATSPEC (Oct 13)

2nd coat

Dulux
Weathershield Low
Sheen Acrylic (B7a)
Dulux
Weathershield Low
Sheen Acrylic (B7a)
Dulux
Weathershield Low
Sheen Acrylic (B7a)
Dulux AcraTex
AcraShield 955
Low Gloss
RollerRoller Finish
(B38a)
Dulux AcraTex
AcraShield 955
Low Gloss Roller
Finish (B38a)
Dulux
Weathershield Low
Sheen Acrylic (B7a)
Dulux
Weathershield Low
Sheen Acrylic (B7a)
Dulux AcraTex
AcraShield 955
Low Gloss Roller
Finish (B38a)
Dulux
Weathershield Low
Sheen Acrylic (B7a)

26

Dulux
Weathershield Low
Sheen Acrylic (B7a)
Dulux
Weathershield Low
Sheen Acrylic (B7a)
(Optional) Dulux
Weathershield Low
Sheen Acrylic (B7a)
Dulux AcraTex
AcraShield 955
Low Gloss
RollerRoller Finish
(B38a)
Dulux AcraTex
AcraShield 955
Low Gloss Roller
Finish (B38a)
Dulux
Weathershield Low
Sheen Acrylic (B7a)
Dulux
Weathershield Low
Sheen Acrylic (B7a)
Dulux AcraTex
AcraShield 955
Low Gloss Roller
Finish (B38a)
Dulux
Weathershield Low
Sheen Acrylic (B7a)

SD 1333

SD 0035

SD 0994

SA 0770

SA 4029

SD 0312

SD 1555

SA 2957

SD 3275

[insert date]

FINISH

Substrate
primed steel)
HD Galvanized
steel or zinc-primed
steel
Shop primed or red
oxide primed
(ROZP) ferrous
metal.
Plastics (solvent
resistant types e.g.
FRP, UPVC)
(low VOC)

0671 DULUX painting

1st coat

2nd coat

3rd coat

Dulux Professional
Galvanised Iron
Primer (B12A)
Dulux Quit Rust All
Metal Primer (B11)

Dulux
Weathershield Low
Sheen Acrylic (B7a)
Dulux
Weathershield Low
Sheen Acrylic (B7a)

Dulux
SD 5444
Weathershield Low
Sheen Acrylic (B7a)
Dulux
SD 2915
Weathershield Low
Sheen Acrylic (B7a)

Dulux PrepLock
Dulux
Dulux
SD 5047
Water Based Stain Weathershield Low Weathershield Low
Blocker (B17A)
Sheen Acrylic (B7a) Sheen Acrylic (B7a)

Semi gloss latex Exterior


Substrate
1st coat

2nd coat

Weatherboard
Dulux Professional Dulux
hardboard cladding Acrylic Primer
Weathershield
Undercoat (B10A) Semi Gloss Acrylic
(B8a)
Fibre cement
Dulux
Dulux
products
Weathershield
Weathershield
Semi Gloss Acrylic Semi Gloss Acrylic
(B8a)
(B8a)
Timber and
Dulux Professional Dulux
veneers
Acrylic Primer
Weathershield
Undercoat (B10A) Semi Gloss Acrylic
(B8a)
Concrete (OFC, tilt Dulux AcraTex
Dulux
slab or pre-cast)
Acraprime Water
Weathershield
Based (B8a)
Semi Gloss Acrylic
(B8a)
Concrete (OFC, tilt Dulux AcraPrime
Dulux AcraTex
slab or pre-cast)
501/1 Water Based AcraShield 955
(High-build
Primer (B15)
Low Gloss Roller
performance
Finish (B38a)
coating system)
Cement render
Dulux AcraPrime
Dulux AcraTex
(High-build
501/1 Water Based AcraShield 955
performance
Primer (B15)
Low Gloss Roller
coating system)
Finish (B38a)
Clay brick and
Berger Gold Label Dulux
masonry
Acrylic Blockfiller
Weathershield
(B8a)
Semi Gloss Acrylic
(B8a)
Concrete blockwork Berger Gold Label Dulux
Acrylic Blockfiller
Weathershield
(B15)
Semi Gloss Acrylic
(B8a)
Concrete blockwork Dulux AcraPrime
Dulux AcraTex
(High-build
501/1 Water Based AcraShield 955
performance
Primer (B15)
Low Gloss Roller
coating system)
Finish (B38a)
Zinc coated metals Dulux Quit Rust All Dulux
NATSPEC (Oct 13)

Manufacturers
Spec Sheet Ref

27

3rd coat
Dulux
Weathershield
Semi Gloss Acrylic
(B8a)
(Optional) Dulux
Weathershield
Semi Gloss Acrylic
(B8a)
Dulux
Weathershield
Semi Gloss Acrylic
(B8a)
Dulux (Optional)
Weathershield
Semi Gloss Acrylic
(B8a)
Dulux AcraTex
AcraShield 955
Low Gloss Roller
Finish (B38a)
Dulux AcraTex
AcraShield 955
Low Gloss Roller
Finish (B38a)
Dulux (Optional)
Weathershield
Semi Gloss Acrylic
(B8a)
Dulux
Weathershield
Semi Gloss Acrylic
(B8a)
Dulux AcraTex
AcraShield 955
Low Gloss Roller
Finish (B38a)
Dulux

Manufacturers
Spec Sheet Ref
SD 07488

SD 5504

SD 07488

SD 4114

SA 0770

SA 4029

SD 3423

SD 3423

SA 2957

SD 4116
[insert date]

FINISH

Substrate

0671 DULUX painting

1st coat

(incl. Zincalume,
Metal Primer (B11)
Galvabond,
Zincanneal,
zincseal, zincprimed steel)
HD Galvanized
Dulux Quit Rust All
steel or zinc-primed Metal Primer (B11)
steel

2nd coat

3rd coat

Manufacturers
Spec Sheet Ref

Weathershield
Weathershield
Semi Gloss Acrylic Semi Gloss Acrylic
(B8a)
(B8a)

Dulux
Weathershield
Semi Gloss Acrylic
(B8a)
Shop primed or red Dulux Quit Rust All Dulux
oxide primed
Metal Primer (B11) Weathershield
(ROZP) ferrous
Semi Gloss Acrylic
metal.
(B8a)
Plastics (solvent
Dulux PrepLock
Dulux
resistant types e.g. Water Based Stain Weathershield
FRP, UPVC)
Blocker (B17A)
Semi Gloss Acrylic
(low VOC system)
(B8a)

Dulux
SD 4116
Weathershield
Semi Gloss Acrylic
(B8a)
Dulux
SD 2158
Weathershield
Semi Gloss Acrylic
(B8a)
Dulux
SD 5048
Weathershield
Semi Gloss Acrylic
(B8a)

Gloss latex exterior


Substrate
1st coat

2nd coat

3rd coat

Dulux
Weathershield
Gloss Acrylic (B9a)
Dulux
Weathershield
Gloss Acrylic (B9a)
Dulux
Weathershield
Gloss Acrylic (B9a)
Dulux AcraTex
AcraShield 955
Low Gloss Roller
Finish (B38a)

Dulux (Optional)
Weathershield
Gloss Acrylic (B9a)
Dulux
SD 0037
Weathershield
Gloss Acrylic (B9a)
Dulux (Optional)
SD 3096
Weathershield
Gloss Acrylic (B9a)
Dulux AcraTex
SA 0770
AcraShield 955
Low Gloss Roller
Finish (B38a)

Dulux AcraTex
AcraShield 955
Low Gloss Roller
Finish (B38a)
Dulux
Weathershield
Gloss Acrylic (B9a)
Dulux
Weathershield
Gloss Acrylic (B9a)
Dulux AcraTex
AcraShield 955
Low Gloss Roller
Finish (B38a)
Dulux
Weathershield
Gloss Acrylic (B9a)

Dulux AcraTex
AcraShield 955
Low Gloss Roller
Finish (B38a)
Dulux
Weathershield
Gloss Acrylic (B9a)
Dulux
Weathershield
Gloss Acrylic (B9a)
Dulux AcraTex
AcraShield 955
Low Gloss Roller
Finish (B38a)
Dulux
Weathershield
Gloss Acrylic (B9a)

Fibre cement
products

Dulux
Weathershield
Gloss Acrylic (B9a)
Timber and
Dulux
veneers
Weathershield
Gloss Acrylic (B9a)
Concrete (OFC, tilt Dulux
slab or pre-cast)
Weathershield
Gloss Acrylic (B9a)
Concrete (OFC, tilt Dulux AcraPrime
slab or pre-cast)
501/1 Water Based
(High-build
Primer (B15)
performance
coating system)
Cement render
Dulux AcraPrime
(High-build
501/1 Water Based
performance
Primer (B15)
coating system)
Clay brick and
Dulux
masonry
Weathershield
Gloss Acrylic (B9a)
Concrete blockwork Berger Gold Label
Acrylic Blockfiller
(B15) (Optional)
Concrete blockwork Dulux AcraPrime
(High-build
501/1 Water Based
performance
Primer (B15)
coating system)
Zinc coated metals Dulux Quit Rust All
(incl. Zincalume,
Metal Primer
Galvabond,
(B12A)
Zincanneal,
zincseal, zinc NATSPEC (Oct 13)

28

Manufacturers
Spec Sheet Ref
SD 2938

SA 4029

SD 5505

SD 5050

SA 2957

SD 3774

[insert date]

FINISH

0671 DULUX painting

Substrate

1st coat

2nd coat

3rd coat

primed steel)
HD galvanised
steel or zinc-primed
steel
Shop primed or red
oxide primed
(ROZP) ferrous
metal.
Plastics (solvent
resistant types e.g.
FRP, UPVC)
(low VOC system)

Dulux Quit Rust All


Metal Primer
(B12A)
Dulux Luxaprime
Zinc Phosphate
Primer (solvent
based) (B11)
Dulux PrepLock
Water Based Stain
Blocker (B17A)

Dulux
Weathershield
Gloss Acrylic (B9a)
Dulux
Weathershield
Gloss Acrylic (B9a)

Dulux
SD 3774
Weathershield
Gloss Acrylic (B9a)
Dulux
SI 1992
Weathershield
Gloss Acrylic (B9a)

Dulux
Dulux
SD 5051
Weathershield
Weathershield
Gloss Acrylic (B9a) Gloss Acrylic (B9a)

Acrylic paint system for bagged masonry Exterior


Substrate
1st coat
2nd coat
Brickwork and
concrete flush
finish (bagged or
sponged) no
texture
Brickwork and
concrete flush
finish (bagged or
sponged) slight
texture
Brickwork and
concrete flush
finish medium
texture

Dulux Sealer
Binder (solvent
based) (B15)

Manufacturers
Spec Sheet Ref
SD 1021

Dulux AcraPrime
Dulux Acratex
Dulux Acratex
501/1 Water Based AcraSand Acrylic
Acrashield (B7a)
Primer (B17A)
(2nd coat Optional)

SA 0754

Dulux AcraPrime
Dulux Acratex
501/1 Water Based Mediteranean Bag
Primer (B17A)
Finish (2 coats)

Dulux Acratex
AcraShield

SA 2266

3rd coat

Manufacturers
Spec Sheet Ref
SA 1868

Concrete,
blockwork and
cement render

Dulux Acraprime
Dulux Acratex
501/1 Water Based Contempo 959
Primer (B15)
Advance Base
Coat(B38a)
Concrete,
Dulux Acraprime
Dulux Acratex Roll
blockwork and
501/1 Water Based On 950-00 Low
cement render
Primer (B15)
Profile Texture
(B38a)
Concrete, masonry, Dulux Acraprime
Dulux Acratex
blockwork and
501/1 Water Based Acrashield 955 Low
cement render
Primer (B15)
Gloss Rolana
Finish (B38a)
Semi gloss, water-based enamel Exterior
Substrate
1st coat
2nd coat

NATSPEC (Oct 13)

3rd coat

Dulux
Dulux
Weathershield Low Weathershield Low
Sheen Acrylic (B7a) Sheen Acrylic (B7a)

Textured acrylic paint system Exterior


Substrate
1st coat
2nd coat

Fibre cement
products

Manufacturers
Spec Sheet Ref

Dulux Acratex
Contempo 959
Advance Finish
Coat (B38a)
Dulux Acratex
Acrashield 955
Finish (B38a)

Dulux Acratex
SA 0770
Acrashield 955 Low
Gloss Rolana
Finish (B38a)

3rd coat

Dulux Professional Dulux Aquanamel Dulux Aquanamel


Acrylic Sealer
Semi Gloss Acrylic Semi Gloss Acrylic
Undercoat (B17A) (B8b)
(B8b)
29

SA 0696

Manufacturers
Spec Sheet Ref
SD 5020

[insert date]

FINISH

Substrate

0671 DULUX painting

1st coat

Timber and
veneers

Dulux Professional
Acrylic Sealer
Undercoat (B17A)
Concrete
Dulux Professional
Acrylic Sealer
Undercoat (B17A)
Cement render
Dulux Professional
Acrylic Sealer
Undercoat (B17A)
Brick and masonry Berger Gold Label
Acrylic Block Filler
(B15)
Concrete blockwork Berger Gold Label
Acrylic Block Filler
(B15)
Zinc coated metals Dulux Quit Rust All
(incl. HD
Metal Primer
galvanized steel,
(B12A)
Zincalume,
Galvabond,
Zincanneal,
zincseal, zincprimed steel)
(low VOC system)
Shop primed or red Dulux Quit Rust All
oxide primed
Metal Primer (B11)
(ROZP) ferrous
metal
(low VOC system)
Non-ferrous metals Dulux Quit Rust All
(incl. aluminium,
Metal Primer (B11)
brass, copper, tin
plate)
(low VOC system)
Plastics (solvent
Dulux PrepLock
resistant types e.g. Water Based Stain
FRP, UPVC)
Blocker (B17A)
(low VOC system)

2nd coat

3rd coat

Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)

Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)
Dulux Aquanamel
Semi Gloss Acrylic
(B8b)

Timber and
veneers
Concrete

Cement render

NATSPEC (Oct 13)

Dulux Professional
Acrylic Sealer
Undercoat (B16)
Dulux Professional
Acrylic Sealer
Undercoat (B16)
Dulux Prepcoat
Acrylic Sealer
Undercoat (B16)
Dulux Professional
Acrylic Sealer
Undercoat (B16)

SD 5021

SD 07495

SD 5041

SD 5041

SD 5023

Dulux Aquanamel Dulux Aquanamel SD 3556


Semi Gloss Acrylic Semi Gloss Acrylic
(B8b)
(B8b)

Dulux Aquanamel Dulux Aquanamel SD 5024


Semi Gloss Acrylic Semi Gloss Acrylic
(B8b)
(B8b)

Dulux Aquanamel Dulux Aquanamel


Semi Gloss Acrylic Semi Gloss Acrylic
(B8b)
(B8b)

Gloss, water based enamel Exterior


Substrate
1st coat
2nd coat
Fibre cement
products

Manufacturers
Spec Sheet Ref
SD 07476

Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
30

3rd coat

SD 5025

Manufacturers
Spec Sheet Ref
SD 5515

Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel SD 07484
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel SD 5028
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel SD 07496
Gloss Acrylic (B42)
& (B9)

[insert date]

FINISH

Substrate

0671 DULUX painting

1st coat

Brick and masonry Berger Gold Label


Acrylic Blockfiller
(B15)
Concrete blockwork Berger Gold Label
Acrylic Blockfiller
(B15)
Zinc coated metals Dulux Quit Rust All
(incl. HD
Metal Primer (B11)
Galvanized steel,
Zincalume,
Galvabond,
Zincanneal,
zincseal, & zincprimed steel)
Shop primed or red Dulux Quit Rust All
oxide primed
Metal Primer (B11)
(ROZP) ferrous
metal.
Non-ferrous metals Dulux Quit Rust
(incl. aluminium,
Etch Primer (B17A)
brass, copper, tin
plate)
Plastics (solvent
Dulux PrepLock
resistant types e.g. Water Based Stain
FRP, UPVC)
Blocker (B17A)
Full gloss, solvent borne Exterior
Substrate
1st coat
Timber and primed Dulux 1 Step Oil
hardboard veneers Based PSU
(solvent based)
(B17)
Zinc coated metals Dulux Quit Rust All
(incl. HD
Metal Primer (B11)
Galvanized steel,
(B12A) # Apply 2
zincalume,
coats #
Galvabond,
zincanneal,
zincseal, zincprimed steel)
Shop primed or red Spot Prime with
oxide primed
Dulux Quit Rust All
(ROZP) ferrous
Metal Primer (B11)
metal.
Non-ferrous metals Dulux PrepLock
(incl. aluminium,
Water Based Stain
brass, copper, tin
Blocker (B17A)
plate)
Plastics (solvent
Dulux Dulux
resistant types e.g. PrepLock Water
FRP, UPVC)
Based Stain
Blocker (B17A)
Plastics (solvent
Dulux Dulux
NATSPEC (Oct 13)

2nd coat

3rd coat

Manufacturers
Spec Sheet Ref
SD 1522

Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)

Dulux Aquanamel
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel SD 1522
Gloss Acrylic (B42)
& (B9)
Dulux Aquanamel SD 2645
Gloss Acrylic (B42)
& (B9)

Dulux Aquanamel Dulux Aquanamel SD 2987


Gloss Acrylic (B42) Gloss Acrylic (B42)
& (B9)
& (B9)
Dulux Aquanamel
Gloss Acrylic
(B42) & (B9)

Dulux Aquanamel SD 5043


Gloss Acrylic (B42)
& (B9)

Dulux Aquanamel Dulux Aquanamel SD 5044


Gloss Acrylic (B42) Gloss Acrylic (B42)
& (B9)
& (B9)

2nd coat

3rd coat

Dulux Super
Dulux Super
Enamel High Gloss Enamel High Gloss
(B5)
(B5)

Manufacturers
Spec Sheet Ref
SD 0039

Dulux Super
Dulux Super
SD 0381
Enamel High Gloss Enamel High Gloss
(B5)
(B5)

Dulux Super
Dulux Super
SD 5069
Enamel High Gloss Enamel High Gloss
(B5)
(B5)
Dulux Super
Dulux Super
SD 3451
Enamel High Gloss Enamel High Gloss
(B5)
(B5)
Dulux Super
Dulux Super
SD 0385
Enamel High Gloss Enamel High Gloss
(B5)
(B5)
Dont use Solvent
31

Dont use Solvent

N/A
[insert date]

FINISH

Substrate

0671 DULUX painting

1st coat

sensitive types e.g. PrepLock Water


polystyrene)
Based Stain
Blocker (B17A)

2nd coat

3rd coat

Based, Use Water


Based Paints

Based, Use Water


Based Paints

Manufacturers
Spec Sheet Ref

Car parking line marking


Requirement:
- Apply nominally 70 mm wide line marking for car parking spaces nominated on drawings.
Materials:
- Paint System: Dulux Roadmaster WB2, spray applied to manufacturers written recommendations.
- Colour shall be white and shall not be subject to discolouration by the bitumen from the road
surface.
Application: Unless approved all paint shall be applied by a mechanical line marking sprayer. The road
surface shall be clean and dry at the time of painting. Paint shall be applied at wet thickness in the
range of 0.35 to 0.40 mm. Bitumen shall be at least 30 days old before coating.
Standard: To AS/NZS 2890.1.
.4.4

ADDITIONAL DATA

Paint system characteristics schedule


Paint code
Characteristic

NATSPEC (Oct 13)

Requirements

32

[insert date]

Vous aimerez peut-être aussi