Académique Documents
Professionnel Documents
Culture Documents
[ME F 342]
dmk@goa.bits-pilani.ac.in
Model Problem-6
3-D cantilever beam of L=10, h=2 & b=3, is subjected to a
load of 6500 unit.
E = 200X105.
1] Find out deflection of the free end
2] Find out maximum tensile and compressive stresses
dmk@goa.bits-pilani.ac.in
Model Problem-6
dmk@goa.bits-pilani.ac.in
dmk@goa.bits-pilani.ac.in
[KPLOT & Find out Key point numbers with GUI and Note it]
dmk@goa.bits-pilani.ac.in
Define Mesh
!DEFINE MESH SIZE
KESIZE,1,0.5
KESIZE,2,0.5
KESIZE,5,0.5
KESIZE,8,0.5
KESIZE,3,2
KESIZE,4,2
KESIZE,6,2
KESIZE,7,2
!MESH THE VOLUME
VMESH,1
!EPLOT
FINI
SAVE
dmk@goa.bits-pilani.ac.in
Solution Phase
/SOLU
!DEFINE SUPPORT
NSEL,S,LOC,X,0
D,ALL,ALL,0
NSEL,ALL
!DEFINE LOAD
NSEL,S,LOC,X,10
NSEL,R,LOC,Y,2
F,ALL,FY,-500 !Tot Load=500X13 nodes = 6500 unit
NSEL,ALL
SOLVE
dmk@goa.bits-pilani.ac.in
dmk@goa.bits-pilani.ac.in
dmk@goa.bits-pilani.ac.in
dmk@goa.bits-pilani.ac.in
dmk@goa.bits-pilani.ac.in
Model Problem-7
Plate (L=8, W=4, T =10) with a central circular hole (D=1), is subjected to
tensile load 1500 N, along length direction. E = 200X105. Using symmetry
concept in FEM, Prove that the stress concentration factor (SCF) = 3.
[Maximum stress = 3 times the Normal stress]
dmk@goa.bits-pilani.ac.in
A1
A2
ASBA,1,2
A3
Define Mesh
!DEFINE MESH
KESIZE,2,0.3
KESIZE,3,0.3
KESIZE,4,0.3
KESIZE,5,0.05
KESIZE,6,0.05
!MESH THE AREA
AMESH,3
EPLOT
FINI
SAVE
dmk@goa.bits-pilani.ac.in
A3
dmk@goa.bits-pilani.ac.in
Deformed Plot
dmk@goa.bits-pilani.ac.in
dmk@goa.bits-pilani.ac.in
dmk@goa.bits-pilani.ac.in
dmk@goa.bits-pilani.ac.in
dmk@goa.bits-pilani.ac.in
dmk@goa.bits-pilani.ac.in
Model Problem-8
2-D Hollow Cylinder of internal radius 5 and external radius 7,
is press fitted into a cylinder of internal radius 7 and external
radius 8, is subjected to an internal pressure of 10 at radius
R5. The outer cylinder is fixed at radius R8.
Determine using 1/4th solid domain:
1] Radial deflection at Rad: R5, R7 and R8
2] Hoop (Tangential) Stress at boundary
Inner Cyl: E = 200X105. Outer Cyl: E = 20X105
dmk@goa.bits-pilani.ac.in
A1
A2
/PREP7
ET,1,PLANE82
PCIRC,5,7,0,90
AGLUE,1,2 = A1 & A3
PCIRC,7,8,0,90
AGLUE,1,2
dmk@goa.bits-pilani.ac.in
A3
A1
AATT,1
ASEL,ALL
A1
ASEL,S,,,3
AATT,2
ASEL,ALL
dmk@goa.bits-pilani.ac.in
Define Mesh
ESIZE,0.1
AMESH,ALL
FINISH
dmk@goa.bits-pilani.ac.in
!Static Analysis
DL,2,1,UX,0
DL,10,3,UX,0
DL,4,1,UY,0
DL,9,3,UY,0
SFL,3,PRES,10 !SFL, Line, Lab, VALUE
DL,5,2,ALL
SOLVE
dmk@goa.bits-pilani.ac.in
Deformed Plot
dmk@goa.bits-pilani.ac.in
dmk@goa.bits-pilani.ac.in
dmk@goa.bits-pilani.ac.in
Tutorial-1
Plate (L=8, W=4, T =10) with a central circular hole (D=1), is subjected to
tensile load 1500 N, along length direction. E = 200X105.
Using symmetry concept in FEM, Determine and verify the theoretical
results in following cases (as shared with you):
Case-1] Biaxial Tension (Length and Width both subjected to 1500 N
Case-2] Biaxial Compression (Length and Width both subjected to 1500 N
Case-3] Tension on width (1500 N) Compression on Length (1500 N)
dmk@goa.bits-pilani.ac.in
Tutorial-2 (Case-1)
3-D cantilever beam of L=10, h=2 & b1 = 3 and b2 = 1 is
subjected to a load of 6500 unit.
E = 200X105.
1] Find out deflection of the free end
2] Find out maximum tensile and compressive stresses
dmk@goa.bits-pilani.ac.in
Tutorial-2 (Case-2)
3-D cantilever beam of L=10, b=3 & h1 = 2 and h2 = 1 is
subjected to a load of 6500 unit.
E = 200X105.
1] Find out deflection of the free end
2] Find out maximum tensile and compressive stresses
dmk@goa.bits-pilani.ac.in
Tutorial-3 (Case-3)
3-D cantilever beam of L=10, b1 = 3 and b2 = 1 & h1 = 2 and h2 = 1 is
subjected to a load of 6500 unit.
E = 200X105.
1] Find out deflection of the free end
2] Find out maximum tensile and compressive stresses
dmk@goa.bits-pilani.ac.in