Académique Documents
Professionnel Documents
Culture Documents
STANDARD
MS 1034:2013
Copyright 2013
DEPARTMENT OF STANDARDS MALAYSIA
STANDARDS MALAYSIA has appointed SIRIM Berhad as the agent to develop, distribute
and sell Malaysian Standards.
For further information on Malaysian Standards, please contact:
Department of Standards Malaysia
Ministry of Science, Technology and Innovation
Level 1 & 2, Block 2300, Century Square
Jalan Usahawan
63000 Cyberjaya
Selangor Darul Ehsan
MALAYSIA
Tel: 60 3 8318 0002
Fax: 60 3 8319 3131
http://www.standardsmalaysia.gov.my
E-mail: central@standardsmalaysia.gov.my
OR
SIRIM Berhad
(Company No. 367474 - V)
1, Persiaran Dato Menteri
Section 2, P. O. Box 7035
40700 Shah Alam
Selangor Darul Ehsan
MALAYSIA
Tel: 60 3 5544 6000
Fax: 60 3 5510 8095
http://www.sirim.my
E-mail: msonline@sirim.my
MS 1034:2013
Contents
Page
Scope............................................................................................................................ 1
Material ......................................................................................................................... 2
Requirements ............................................................................................................... 2
Marking ......................................................................................................................... 5
Storage ......................................................................................................................... 6
Annex A
Bibliography ............................................................................................................................... 8
MS 1034:2013
Committee representation
The Industry Standards Committee on Plastic and Plastics Products (ISC J) under whose authority this Malaysian
Standard was developed, comprises representatives from the following organisations:
Department of Standards Malaysia
Federation of Malaysian Manufacturers
Jabatan Kerja Raya Malaysia
Malaysian Association of Standards Users
Malaysian Institute of Chemistry
Malaysian Petrochemical Association
Malaysian Plastics Manufacturers Association
Malaysian Rubber Board
Ministry of Domestic Trade, Co-operatives and Consumerism
Ministry of Health Malaysia
Ministry of International Trade and Industry
SIRIM Berhad (Plastic Technology Group)
SIRIM Berhad (Secretariat)
SIRIM QAS International Sdn Bhd
The Institution of Engineers, Malaysia
The Plastics and Rubber Institute of Malaysia
Universiti Kebangsaan Malaysia
Universiti Sains Malaysia
Universiti Teknologi Malaysia
The Technical Committee on Plastics Pipes and Fittings which supervised the development of this Malaysian
Standard consists of representatives from the following organisations:
George Fischer (M) Sdn Bhd
Malaysian Plastics Manufacturers Association
Paling Industries Sdn Bhd
Perbadanan Bekalan Air Pulau Pinang Sdn Bhd
SAJ Holdings Sdn Bhd
SIRIM Berhad (Advanced Polymer and Ceramics Programme)
SIRIM Berhad (Secretariat)
SIRIM QAS International Sdn Bhd (Product Certification and Inspection Department)
SIRIM QAS International Sdn Bhd (Testing Services Department)
Suruhanjaya Perkhidmatan Air Negara
Syarikat Bekalan Air Selangor Sdn Bhd
The Institution of Engineers, Malaysia
Universiti Kebangsaan Malaysia
Universiti Teknologi MARA
The Working Group on Plastic Conduits for Telecommunication Cables which developed this Malaysian Standard
consists of representatives from the following organisations:
B & Z Plastic Industry Sdn Bhd
Beta Network Sdn Bhd
Bina Plastic Industries Sdn Bhd
Chin Lean Plastic Factory Sdn Bhd
Fibrecomm Network (M) Sdn Bhd
Malayan Electro-Chemical Industry Co Sdn Bhd
Malaysian Communications and Multimedia Commission
Malaysian Plastics Manufacturers Association
Paling Industries Sdn Bhd
PETRONAS Polymer Technology Centre
SIRIM Berhad (Secretariat)
SIRIM QAS International Sdn Bhd (Product Certification and Inspection Department)
SIRIM QAS International Sdn Bhd (Testing Services Department)
Telekom Malaysia Berhad
Universiti Malaya
Zer Plastic Sdn Bhd
ii
MS 1034:2013
Foreword
This Malaysian Standard was developed by the Working Group on Plastic Conduits for
Telecommunication Cables under the authority of the Industry Standards Committee on
Plastics and Plastics Products.
Major modifications in this revision are as follows:
a) the title has been changed to "Unplasticised polyvinyl chloride (PVC-U) conduit for
underground telecommunication cables - Specification";
b) incorporation of clause for Normative references;
c) incorporation of clause for Terms and definitions and the definition for "reprocessable
material";
d) replacement of "rework material" with "reprocessable material";
e) incorporation of carbon black content in subclause 4.3;
f)
deletion of Internal diameter, M, from Table 1 and Figure 1 since the value is redundant;
deletion of value at curves (25 mm R and 0.3T - 0.5T rad.) in Figure 1 since the value is
redundant;
j)
re-draw Figure 1;
This Malaysian Standard cancels and replaces MS 1034:1986, Specification for rigid
polyvinyl chloride conduit for underground telecommunication cables.
Compliance with a Malaysian Standard does not of itself confer immunity from legal
obligations.
iii