Académique Documents
Professionnel Documents
Culture Documents
B10E
Power Supply Unit
Programma Products
B10 E
B10E
Weight
IMPORTANT!
Read the Users manual before using the instrument.
Testing the minimum trip voltage of a breaker
1. Connect Power Supply Unit B10E to the breaker's opening circuit
and to the spring-charging motor.
2. Set the desired test voltage using the variac.
3. Activate the trip pulse switch.
4. Repeat steps 2-3 at a higher voltage if the circuit breaker does
not trip.
When using the B10E, we recommend that the incoming power be
protected by a 16 A wall-socket fuse. The incoming current surge
occurring at certain combinations can blow the fuse if a slow-blow 10
A fuse or a quick-action 16 A fuse is used.
To minimize blowing of the wall-socket fuse, the B10E Softstart is
equipped with a device that reduces the peak current surges that can
blow this fuse. The B10E Softstart will substantially reduce but will
not fully eliminate the blowing of 10 A fuses.
Measurement section
Voltmeter digital
Range
Resolution
Inaccuracy
Current shunt
24-250 V DC
Max 1 s
2% peak-to-peak of the preset voltage
Current (A)
10
10
6.5
3
Load dependency
<6%
<3%
<2%
<2%
24-250 V AC
Max 5 A
Max 30 min
Specications B10E
Specications are valid at nominal input voltage and an ambient
temperature of +25C, (77F). Specications are subject to change
without notice.
Environment
Application eld
Temperature
Operating
0C to +50C (32F to +122F)
Storage & transport -40C to +70C (-40F to +158F)
Humidity
5% 95% RH, non-condensing
Current
(A)
12
18
Load voltage
(V)
40
30
Max load
interval (s)
60
20
120
120
240
240
12
18
6
9
90
70
200
185
60
20
60
20
Ordering information
B10E
Art.No.
Complete with:
Cable set GA-00032
Transport case GD-00182
BG-29092
CE-marking
EMC 89/336/EEC
LVD
General
Mains voltage
Power consumption
(max)
Protection
Dimensions
Instrument
Transport case
B10 E
Application example
Programma Electric AB
Eldarvgen 4
SE-187 75 TBY
Sweden
Tel
Fax
E-mail
Internet
Subject to change without notice. Extract from catalog Electrical Test Equipment Art. No. ZG-9906E R100 GEA 13466A ENG