Académique Documents
Professionnel Documents
Culture Documents
4676
Database version
2015.12.11.15.46
Date
04/02/2016
Comment
LINTEL BEAM RECOMMENDATION
Design Specifications
Anchor
Anchor system
Anchor
Anchorage depth
Design Data
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 1
C-FIX 1.18.0.4676
Database version
2015.12.11.15.46
Date
04/02/2016
Input data
Design method
Base material
Concrete condition
Reinforcement
Drilling method
Installation type
Annular gap
Type of loading
Base plate location
Base plate geometry
Profile type
Design actions *
NSd
kN
VSd,x
kN
VSd,y
kN
MSd,x
kNm
MSd,y
kNm
MT,Sd
kNm
0.00
0.00
-5.00
0.25
0.00
0.00
Shear Action
kN
Shear Action x
kN
Shear Action y
kN
4.04
2.50
0.00
-2.50
4.04
2.50
0.00
-2.50
Anchor no.
Force:
Tension
Compression
0.18
5.3
8.08
8.08
N/mm
kN , X/Y position ( 0 / 0 )
kN , X/Y position ( 0 / -31 )
Capacity
kN
Utilisation N
%
Steel failure *
4.04
30.93
13.1
Pullout failure *
4.04
10.67
37.9
8.08
12.77
63.2
Proof
Steel failure
(NRd,s)
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 2
C-FIX 1.18.0.4676
Database version
2015.12.11.15.46
Date
04/02/2016
NRk,s
kN
Ms
NRd,s
kN
NSd
kN
N,s
%
46.40
1.50
30.93
4.04
13.1
Anchor no.
N,s
%
Group N
Decisive Beta
13.1
N,s;1
13.1
N,s;2
NRk,p
kN
Mp
NRd,p
kN
NSd
kN
N,p
%
16.00
1.000
1.50
10.67
4.04
37.9
Anchor no.
N,p
%
Group N
Decisive Beta
1, 2
37.9
N,p;1
Pullout failure
(NRd,p)
Eq. (5.2)
Eq. (5.2a)
Eq. (5.2c)
Eq. (5.2d)
Eq. (5.2e)
NRk,c
kN
Mc
NRd,c
kN
NSd
kN
N,c
%
19.16
1.50
12.77
8.08
63.2
Anchor no.
N,c
%
Group N
Decisive Beta
1, 2
63.2
N,c;1
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 3
C-FIX 1.18.0.4676
Database version
2015.12.11.15.46
Date
04/02/2016
Action
kN
Capacity
kN
Utilisation V
%
2.50
47.20
5.3
5.00
25.54
19.6
5.00
9.36
53.4
VRk,s
kN
Ms
VRd,s
kN
VSd
kN
Vs
%
59.00
1.25
47.20
2.50
5.3
Anchor no.
Vs
%
Group N
Decisive Beta
5.3
Vs;1
5.3
Vs;2
Eq. (5.6)
Eq. (5.2)
Eq. (5.2a)
Eq. (5.2c)
Eq. (5.2d)
Eq. (5.2e)
VRk,cp
kN
Mc
VRd,cp
kN
VSd
kN
V,cp
%
38.31
1.50
25.54
5.00
19.6
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 4
C-FIX 1.18.0.4676
Database version
2015.12.11.15.46
Date
04/02/2016
Anchor no.
V,cp
%
Group N
Decisive Beta
1, 2
19.6
V,cp;1
Eq. (5.7)
Eq. (5.7a)
Eq. (5.7b/c)
Eq. (5.7e)
Eq. (5.7f)
Eq. (5.7g)
Eq. (5.7h)
VRk,c
kN
Mc
VRd,c
kN
VSd
kN
V,c
%
14.04
1.50
9.36
5.00
53.4
Anchor no.
V,c
%
Group N
Decisive Beta
1, 2
53.4
V,c;1
Utilisation N
%
Shear Loads
Utilisation V
%
Steel failure *
13.1
5.3
Pullout failure *
37.9
19.6
63.2
53.4
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 5
C-FIX 1.18.0.4676
Database version
2015.12.11.15.46
Date
04/02/2016
Utilisation concrete
Proof successful
Eq. (5.8a)
Eq. (5.8b)
Eq. (5.9)
t = 8 mm
None
Technical remarks
All data and information in the software is based on fischer products and common engineering knowledge. Please
check all the proof results against local valid standards and approvals. As fischer is not the design office, the
attached is no guarantee for incorrect input or assumptions. Any recommendations have to be approved by the
building-authority or project engineer. Results are valid only for anchor system calculated in the attached. If any
part of the system is changed, it will invalidate this report and new calculations would be required.
The transmission of the anchor loads to the supports of the concrete member shall be shown for the ultimate limit state and
the serviceability limit state; for this purpose, the normal verifications shall be carried out under due consideration of the
actions introduced by the anchors. For these verifications the additional provisions given in the current design method shall
be taken into account.
As a pre-condition the anchor plate is assumed to be flat when subjected to the actions. Therefore, the plate must be
sufficiently stiff. The C-Fix anchor plate design is based on a proof of stresses and does not allow a statement about
the stiffness of the plate. The proof of the necessary stiffness is not carried out by C-Fix.
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 6
C-FIX 1.18.0.4676
Database version
2015.12.11.15.46
Date
04/02/2016
Installation data
Anchor
Anchor system
Anchor
Accessory
Art.-No. 44887
Art.-No. 89300
Art.-No. 512609
Installation details
Thread diameter
Drill hole diameter
Drill hole depth
Anchorage depth
Drilling method
Drill hole cleaning
Installation type
Annular gap
Installation torque
Socket size
Base plate thickness
Total fixing thickness
M 10
d0 = 15 mm
h2 = 100 mm
hef = 70 mm
Hammer drilling
only blow out by hand
Push-through installation
Annular gap not filled
Tinst = 40.0 Nm
17 mm
t = 8 mm
tfix = 8 mm
Not available
t = 8 mm
df=17 mm
Attachment
Profile type
None
Anchor coordinates
Anchor no.
x
mm
y
mm
-75
75
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 7