Académique Documents
Professionnel Documents
Culture Documents
LAB INCHARGE
(a)Polygons using absolute, relative and polar coordinate methods and circle
Aim:
To create the simple polygons using different coordinate
methods and circle using different methods in AutoCAD.
Tools used:
Software: windows XP, AutoCAD2010.
Hardware: Pentium IV, 512 MB ram, VGA card etc.
Commands used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
(b)
Multiline figure
Aim:
To create the general multiline figure in AutoCAD.
Tools used:
Software: windows XP, AutoCAD2010.
Hardware: Pentium IV, 512 MB ram, VGA card etc.
Commands used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
DATE:
Aim:
To draw the Title Block in AutoCAD for the given dimension.
Tools used:
Software: windows XP, AutoCAD2010.
Hardware: Pentium IV, 512 MB ram, VGA card etc.
Commands used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
DRAWING OF CURVES
DATE:
(a)
involutes of triangle, square, pentagon, hexagon
and circle.
Aim:
To draw the involutes of triangle, square, pentagon, hexagon
and circle by using AutoCAD.
Tools used:
Software: windows XP, AutoCAD2010.
Hardware: Pentium IV, 512 MB ram, VGA card etc.
Commands used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
(b)
Aim:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
(c)
Spiral Curves
Aim:
To construct the B-spline and Cubic spline curves using
AutoCAD.
Tools used:
Software: windows XP, AutoCAD2010.
Hardware: Pentium IV, 512 MB ram, VGA card etc.
Commands used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
(a)
Aim:
To draw the front view, top view and end view of the given
prisms and pyramids using AutoCAD.
Tools used:
Software: windows XP, AutoCAD2010.
Hardware: Pentium IV, 512 MB ram, VGA card etc.
Commands used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
(b)
cone
Aim:
To draw the front view, top view and end view of the given
Cone using AutoCAD.
Tools used:
Software: windows XP, AutoCAD2010.
Hardware: Pentium IV, 512 MB ram, VGA card etc.
Commands used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
Aim:
To generate the orthographic views of the given isometric
projections using AutoCAD.
Tools used:
Software: windows XP, AutoCAD2010.
Hardware: Pentium IV, 512 MB ram, VGA card etc.
Commands used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
Aim:
To draw the plan of the given residential buildings using
AutoCAD.
Tools used:
Software: windows XP, AutoCAD2010.
Hardware: Pentium IV, 512 MB ram, VGA card etc.
Commands used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
Aim:
To draw the given steel truss using AutoCAD.
Tools used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
(a)
Aim:
To draw the sectional views of the given prism and cone
using AutoCAD.
Tools used:
Software: windows XP, AutoCAD2010.
Hardware: Pentium IV, 512 MB ram, VGA card etc.
Commands used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
(b)
Pyramids
Aim:
To draw the sectional views of the given prism and cone
using AutoCAD.
Tools used:
Software: windows XP, AutoCAD2010.
Hardware: Pentium IV, 512 MB ram, VGA card etc.
Commands used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
Aim:
To draw the projection of the given sectional views of the
pyramids by using AutoCAD.
Tools used:
Software: windows XP, AutoCAD2010.
Hardware: Pentium IV, 512 MB ram, VGA card etc.
Commands used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
Aim:
To draw the isometric view of the given objects using
AutoCAD.
Tools used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
Aim:
To draw the 3-D model of the given objects and obtain the 3D surface model command by using AutoCAD.
Tools used:
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.
Aim:
To draw the 3-D model of the given objects and obtain the 2D multi-views using AutoCAD.
Tools used:
Software: windows XP, AutoCAD2010.
Procedure:
Result:
Thus the given objects are drawn and plotted in AutoCAD.