Académique Documents
Professionnel Documents
Culture Documents
DIRECTOR-GENERAL OF SHIPPING
TO CONDUCT
SIX MONTHS PRE-SEA TRAINING COURSE FOR GRADUATES ENTRY SCHEME
FOR NAUTICAL CADETS INCLUDING BASIC STCW COURSES AS
APPROVED BY THE DIRECTOR GENERAL OF SHIPPING
TABLE OF CONTENTS
1.
PREAMBLE
2.
3.
4.
5.
6.
2.1
Aims
2.2
Objectives
2.3
Scope
2.4
Application
Entry standards
3.2
Required attendance
3.3
INFRASTRUCTURE REQUIREMENTS
4.1
Physical requirements
4.2
Auditorium of hall
4.3
Chartroom
4.4
Navigation laboratory
4.5
Seamanship laboratory
4.6
Carpentry workshop
4.7
Plumbing workshop
4.8
Machine workshop
4.9
Electrical workshop
4.10
Hotwork workshop
4.11
Videos/CDs/DVDs
4.12
Computer programmes
COURSE DETAILS
5.1
Course duration
5.2
Course outline
FACULTY REQUIREMENTS
-1-
6.1
6.2
6.3
6.4
6.5
Faculty Strength
6.6
Instructor strength
7.
8.
9.
HOLIDAYS
10.
UNIFORMS
10.1
10.2
10.3
11.
QUALITY STANDARDS
12.
ASSESSMENT
13.
INSPECTIONS
14.
COST OF INSPECTIONS
15.
FEES TO GOVT.
16.
17.
PREAMBLE
This Directorate, being aware of the cyclic nature of the shipping trade and industry,
has initiated proactive and pragmatic measures to deal with the current and future
needs
of
the
industry
at
large
and
seafarers
in
particular.
Taking note of the BIMCO report and its projections for global shortage of sea-going
officers, it is felt that this void can be effectively filled in by the Indian Officers,
provided innovative training schemes are put in place such that we are able to create
qualified officers in a shorter period without any compromise on the quality and
standards
of
competence.
These measures shall be helpful in overcoming the acute shortage of officers on
Indian flag ships as well as supplement the requirements of International Shipping.
Needless to mention that it will help to generate and enhance the employment
potential for Indian Nationals as seafaring officers in the Global Shipping Industry
including
Indian
flag
ships.
In order to reduce the lead time to produce such qualified officers, it is necessary that
horizontal induction from the available human resources takes place at higher
academic level qualification. This method will help to generate qualified officers in a
shorter
period.
-2-
Taking into account the above factors, this Directorate notifies the following Graduate
Entry Scheme:
2.
Aims
To provide professionally competent NAUTICAL CADETS, with all round
proficiency and dedication to the profession, for the operation of merchant ships.
2.2
Objectives
To provide a course that trains qualified officers in a shorter period by utilising
higher academic level qualification with the technical expertise necessary for the
safe and efficient operation of merchant ships.
2.3
Scope
These guidelines are for institutes that seek approval of the Directorate General of
Shipping (DGS). The candidates who undergo this course will be eligible for the
CoC Examination conducted by DGS in the Nautical Department.
2.4
2.4
2.5
Fees:
The institute shall pay a non-refundable processing fee of Rs. 50,000/- by means
of a Demand Draft in favour of the Director General of Shipping payable at Mumbai
alongwith application for approval of the Course.
3.
Entry Standards
-3-
3.2
Required Attendance
Considering that the course is residential, attendance shall normally be 100%.
However, 90% and above is acceptable. In exceptional cases, the course in
charge may accept attendance of 75% and above, if he is satisfied that the
reason for shortfall is genuine and that the cadets performance in the course has
been good. Such cases shall be recorded & intimated to the Chairman of the
respective Academic Council.
3.3
4.
INFRASTRUCTURE REQUIREMENTS
4.1
4.2
Chartroom: Facilities shall be available for Chart work. Chart table shall be
approximately 1.15 m x 0.8 m and the minimum space in the classroom shall be
at the rate of 2m2 per student. The facilities for chart work shall be for not less
than 40 students at a time.
4.3
4.3.1
Layout
of
bridge
with
dummy
steering wheel, Echo Sounder, etc.
instrument
4.3.2
4.3.3
Steering Simulator
4.3.4
Sextant
4.3.5
Chronometer
4.3.6
4.3.7
4.3.8
Azimuth Circle
4.3.9
Bionoculars (7x50)
4.3.10
Telescope
4.3.11
panels
including
simulated
Load-line
4.3.12
Parallel Rulers
4.3.13
Set sqares
4.3.14
4.3.15
Aneroid barometer
4.3.16
4.3.17
Whirling Psychrometer
4.3.18
Glass-mounted or wall-mounted
and reading of the Draft
device
for
-4-
4.4.
4.3.19
4.3.20
4.3.21
4.3.22
A set of recent
carried on ships
4.3.23
4.3.24
4.3.25
4.3.26
4.3.27
4.3.28.
Deck logbook
4.3.29.
4.3.30.
Chronometer logbook.
4.3.31.
4.3.32.
4.3.33.
MOB Marker.
4.3.34.
Navigation Lights.
4.3.35.
4.3.36.
4.3.37.
4.3.38.
necessarily
current)
nautical
publications
4.5
(not
4.4.2.
4.4.3.
Rigging: Manila ropes (various sizes), synthetic ropes (various types and
sizes), Steel Wire ropes (various types and sizes), double and triple heave
blocks, snatch block, chain block, bottle screws and turnbuckles, Bulldog
grips, Hand Leadline, Marlin Spikes, Wooden Spikes, Pilot ladder rigged up
for rope climbing.
4.4.4.
Lifting gear: Photographs or slides or models of various types of cargo gearDerricks, Velle Derricks, Jumbo Derricks, Stulken Derricks, Cranes, Cargo
Slings, Cargo hooks, etc.
4.4.5.
-5-
tools/equipment to include:
4.5.1.
Bench vices
4.5.2
Crow bars.
4.5.3.
4.5.4.
4.5.5.
4.5.6
4.5.7.
Nail extractors.
4.5.8.
4.5.9.
4.5.10.
Masonry punches.
4.5.11.
4.5.12.
4.5.13.
4.5.14.
Jackplane.
4.6
4.7
Machine workshop: Of suitable area, provided with appropriate machines, tools and
implements, commensurate with the number of cadets under training at a time.
Equipment to include:
4.7.1.
Grinding machine
4.7.2.
4.7.3.
4.7.4.
Various spanners (open, ring, socket, ratchet, torsion, Allen keys, etc)
4.7.5.
4.7.6.
4.7.7.
4.7.8.
4.8.
Electrical Workshop: Of suitable area, provided with suitable tools, implements and
appliance,
commensurate with the number of cadets under training at a time.
Equipment to include:
4.8.1
4.8.2
-6-
4.9
4.10
4,11
4.8.3
4.8.4
4.8.5
4.8.6
Hotwork workshop : Of suitable area, suitable fitted out for gas cutting/welding and
electric are
welding practice, commensurate with the number of cadets under
training at a time. Equipment to include :
4.9.1
4.9.2
4.9.3
Hydraulic and Pneumatic Workshop : Of suitable area, provided with suitable tools,
implements and appliances commensurate with the number of cadets under training at
a time. Equipment to include :
4.10.1
Hydraulic : Basic hydraulic power pack, set of hydraulic pumps (Rotary vane,
Variables pump, Gear pump, Lobe pump) hydraulic motors, hydraulic coupling,
piping and valves. Hydraulic cylinders (Linear and Rotary actuators).
Proportion valves. Direction control valve. Flow control valve, check valve, auto
pilot unit. Hydraulic circuits on hydraulic trainer.
4.10.2
4.12
4.13
5.
5.1
COURSE DETAILS
Pre-sea Training
5.1.1.
5.1.2
-7-
training requirement. However, they are required to complete four basic Modular
Courses under STCW 95.
5.2
5.3
Compentency Course:
On completion of sea service requirement as stated in para 5.2 candidates are
required, to undertake preparatory course of 4 months duration before appearing
for their written examination.
5.4
6.
6.1
FACULTY REQUIREMENTS
Qualifications and experience of course in-charge:
6.1.1
6.1.2
6.1.3.
At least one year in the rank of Master and experience as a regular (full time)
faculty member of at least one year at Pre-Sea Cadet (degree course only) or
Competency Courses.
6.1.4.
One year as Chief Officer and experience as a regular (full time) faculty member
of atleast two years at Pre-Sea Cadet (degree course only) or Competency
Courses.
Or
Extra Master Certificate
6.2
6.3.
6.2.2
-8-
and
6.3.2.
6.4.
6.5.
6.6.
Held a rank not lower than Petty Officer in the Indian Navy or Junior Officer
(Deck dept) or Boson on merchant ship.
6.5.2.
6.5.3.
6.5.4.
6.5.5.
6.5.6.
Instructors for skills such as Carpentry, Plumbing, and Machining and Electrical
repairs are exempt from the above requirements if they possess trade
certificates from ITI or equivalent acceptable to DGS.
6.5.7.
Instructors already in the employ of DGS approved pre-sea training institutes for
three years or more on the date these guidelines become applicable, may
continue to serve as such even if they do not possess the above qualifications.
6.5.8.
Faculty Strength:
6.6.1
6.7.
6.6.2
For practicals and other work where ratio greater inter-action is necessary, the
class should be sub-divided into groups of not more than 8 cadets per
instructor.
6.6.3
6.7.2 The number of visiting faculty members, some of whom may be experts required only
for a limited number of lectures.
7.
DUTY OFFICER & DUTY INSTRUCTOR
There must be at least one Nautical Officer (Master Mariner) or Engineer Officer (MEO
Class I), if keeping duties in rotation, and one instructor designated as on duty each day
on the campus at all times during the course period.
8.
9.
HOLIDAYS
-9-
9.1.1.
9.1.2.
9.1.3.
10.
11.
UNIFORMS
10.1
10.2
Uniforms for cadets: Cadets must wear uniform at all times during training
activities ceremonial kit, day kit, games kit, boiler suits, night suits, swimming
kit, etc. The list of uniforms and other accessories that each cadet must possess
while under training in the institute is given in Annexture 2.
10.3
Uniforms for other staff: The institute may prescribe suitable uniform to be worn
by non-teaching staff.
QUALITY STANDARDS
As per DGS Order No. 2 of 2007
12.
WRITTEN EXAMINATION:
Candidates are required to appear and successfully pass in all subjects as specified for
Second Mate foreign going (i.e. six papers in the three functions).
13.
ORAL EXAMINATION:
Candidates are required to appear and successfully pass in all the three functions.
14.
CERTIFICATION:
On completion of the written and oral examination including the required modular
courses as per the requirement of the META Manual Volume I and II, candidates will
be awarded Certificate of Competency as Second Mate of a foreign going ship
(Officer in-charge of a Navigational Watch) on board ships of 500 gross tons or more
as per the provisions of regulation II/1 of STCW 1978 as amended.
15.
16.
COST OF INSPECTIONS
As per DGS order no: 2 of 2007
17.
FEES TO GOVT
As per DGS order no: 2 of 2007
- 10 -
ANNEXURE -1
Epaulettes
1.1
1.2
1.3
1.4
Engineer Officer (MEO Class I): A diamond and four stripes with purple in between.
1.5
1.6
1.7
Caps
2.1 All faculty Members: White Peak cap.
3.
2.2
Chief Officer, Senior Nautical Officer: White peak cap with one row of golden laurels.
2.3
Captain Superintendent: White peak cap with two rows of golden laurels.
Uniform
3.1
White half-sleeve shirt with epaulettes, white trousers, white belt, white socks and
black shoes.
3.2
In cold weather, black belt and black socks may be substituted for white.
3.3
White full-sleeve shirt may be worn after sunset in mosquito prone areas.
ANNEXURE -2
List of Uniform Items and Accessories for Graduate Nautical (Deck) Cadets
Courses
Nos.
1.
- 11 -
2.
3.
4.
White terycot half-sleeve with two front pockets and holes for epaulettes
5.
6.
7.
8.
9.
10.
Black terycot ties - 5 cm wide (same colour and clot as item 2) with yellow
monogram of the Institution
11.
Whit uniform peack-cap (first quality plastic) with cap band and zeri badge
(not for Sikhs)
12.
13.
14.
15.
16.
17.
18.
19.
2 pairs
20.
2 pairs
21.
2 pairs
22.
23.
24.
25.
26.
Swimming trunks
27.
28.
Black shoes
1 pair
29.
1 pair
30.
1 pair
31.
Safety gloves
1 pair
32.
33.
34.
Exercise books - No. of books, their size and No. of pages in each book to be specified
by the Institute.
- 12 -
ANNEXURE -3
- 13 -
Directorate General of
Shipping Mumbai
Syllabus for
Sr. No.
- 14 -
Exam
Marks
Terrestrial Navigation
1
3 Hours
100
70
3 Hours
100
70
3 Hours
100
50
3 Hours
100
60
3 Hours
100
60
3 Hours
100
50
Part 2: Chartwork
Celestial Navigation
2
- 15 -
OUTLINE FOR THE SIX MONTHS COURSE FOR GRADUATE ENTRY DECK CADETS
Introduction
Navigation
Function
Spherical
Trigonometry
Meteorology
Celestial Navigation
Terrestrial Nav
(Chartwork)
Bridge Equipment
And Watchkeeping
Signals (Morse
Code)
Single letter Flags
GMDSS
VHF and Walkie
talkies
Cargo Handling
and Stowage
Cargo Gear, Cargo
Handling and
Stowage
Oil Tanker
Familiarisation
Course
Gas Tanker
Familiarisation
Course
Chemical Tanker
Familiarisation
Course
Lectures
6
Practicals/Numericals
0
Total
6
Lectures
Practicals/Numericals
Total
18
15
36
6
12
21
48
21
29
50
30
12
42
18
18
0
25
12
0
12
25
141
98
239
Lectures
Practicals/Numericals
Total
36
42
27
Hours
Hours
Hours
Hours
Hours
Hours
30
Hours
27
30
Hours
27
30
Hours
Ship Operation,
Safety & Care of
Persons
Practical
Seamanship
Hours
Hours
Hours
Hours
Naval Architecture
Hours
Ship Construction
Ship Stability
General
Boatwork
Shipvisits
Safety & Legislation
Hours
117
15
132
Lectures
Practicals/Numericals
Total
15
15
30
0
0
15
9
9
60
10
15
0
24
24
90
10
15
15
- 16 -
Hours
Hours
Hours
Hours
Hours
Hours
Prevention
Miscellaneous
Function
Workshop practicals
Basic Computer
Training
HRD progr.
(Tr.Circ.24/05)
TOTALS
Pollution prevention
Internal Assessment
Modular Courses
PST
PSSR
FPFF
EFA
0
103
15
193
Lectures
Practicals/Numericals
Total
10
59
69
18
24
15
Introduction
Navigation
Function
Cargo Handling
and Stowage
Ship Operation,
Safety & Care of
Persons
Miscellaneous
Function
TOTALS
Hours per day
Days Per Week
(excl.Sundays)
15
90
77
Practicals/Numericals
0
108
Total
6
141
98
239
132
15
147
90
103
193
16
77
93
385
293
678
113
18.83
Instructional Weeks
Modular courses
Joining Day/ Passing
out/
Public Holidays
Internal Tests/
Exam preparation
Written, Practical
and Orals
Examinations
Semester break
(home leave)
Hours
Hours
15
31
Lectures
6
18
18
18
15
Hours
3 days
3 days
3 days
2 days
Hours
Days
Weeks
18
18
18
15
Two
Weeks
19
2
Weeks
weeks
1
week
1
week
1
week
2
Total
26
- 17 -
weeks
weeks
Terrestrial Navigation
Paper No 1
Max. Marks 100
Capt. H. Subramaniam
Capt. H. Subramaniam
- 18 -
Principles Of Navigation
Chartwork
Capt. S. K. Puri
Capt. M. V. Naik & Capt. Varty
- 19 -
Note:
Use of scientific calculator, Nories Tables and Nautical Almanac IS
PERMITTED
Part 1: Terrestrial Navigation
Principles
(25 marks)
15
10
(25 marks)
15
10
Practicals
(10 marks)
05
05
(40 marks)
10
10
10
10
- 20 -
Celestial Navigation
Paper No 2
Max. Marks 100
Capt. H. Subramaniam
Capt. H. Subramaniam
Capt. H. Subramaniam
Capt. Joseph & Capt. Rewari
- 21 -
Note:
Use of scientific calculator, Nories Tables and Nautical Almanac IS
PERMITTED
Part 1: Principles of Navigation
(40 marks)
Question 1 (Compulsory)
Question 2a OR 2b (answer any one)
Question 3a OR 3b (answer any one)
Question 4a OR 4b (answer any one)
Part 2: Practical Navigation
10
10
10
10
(40 marks)
Question 5 (Compulsory)
Question 6a OR 6b (answer any one)
Question 7a OR 7b (answer any one)
Question 8a OR 8b (answer any one)
10
10
10
10
(20 marks)
10
10
- 22 -
1. Collision Regulations with specific emphasis on Rules: 3, 5, 7, 8, 13, 14, 15, 16, 17,
18, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30 & Annexure IV.
2. Sextant. Use of a Sextant for vertical and horizontal angles. Correctable errors of a
sextant and methods of correction.
3. Marine Chronometer. Chronometer error log. Exercises on accumulated rates.
4. Wet Card Magnetic Compass. Gyrocompass, Repeaters, and Course Recorder.
5. Echo Sounder and Depth Recorder. Depths below the ship.
6. Basic working of Marine Radar.
7. Overview of use of following Bridge Equipments
a. GPS
b. AIS
c. VDR
d. Speed log
e. Auto Pilot and Course recorder
8. Watch keeping duties at anchor and at sea. Duties associated with preparing a
vessel to proceed to sea. Procedure of testing controls. Procedure of taking over
watch at sea. Recording all relevant information in Logbooks. Duties prior to arrival
port. Procedure of embarking and disembarking a pilot. Methods to call the Master
and the circumstances under which he should be called.
Part 2: Meteorology (Theory 15 hrs; Practicals 6 hrs)
9. The atmosphere: Layers, atmospheric temperature: adiabatic changes, DALR,
SALR, diurnal variation of atmospheric pressure - semi-diurnal variation,
atmospheric temperature, barometric tendency.
10. Heat: Conduction, convection, radiation; insolation; why cloudy nights are warmer
than clear-sky nights; green-house effect; the seasons; why polar regions are colder
than equatorial regions; temperature zones of the world.
11. Water vapour in the atmosphere: Humidity, absolute humidity, relative humidity,
saturation, dew point, and meteorological application to hold ventilation. Hydrological
cycle: Evaporation, condensation, precipitation; general idea of the hydrological
cycle; condensation near the ground - dew, hoar frost, glazed frost, rime; types of
precipitation - drizzle, rain, freezing rain/drizzle, snow flakes, snow pellets, sleet, ice
pellets, hail. Visibility: Mist, fog, haze, spray and their differences; judging and
reporting visibility, types of fog - radiation fog, advection fog, smog, arctic
sea-smoke, Orographic fog.
12. Clouds: Classification & description of the ten basic types of clouds; formation due to
turbulence, Orographic lifting, convection currents & frontal lifting. International Cloud
Atlas - identify various types of clouds.
13. Pressure gradient, wind and waves: Isobars, pressure gradient, Coriolis force
(geostrophic force); sea, swell, gust, squall, veering, backing; Buys Ballot's Law;
Beaufort wind scale and Beaufort weather notation; descriptive terms to use to
describe sea and swell; true and apparent wind -their meaning and difference.
14. Judging wind: Estimating direction and force of wind at sea by the appearance of the
sea and the use of the 'State of sea card'. Difference between true & apparent wind.
Exercises involving true and apparent wind.
15. Meteorological instruments Aneroid barometer: Principle, construction, corrections,
errors, maintenance and precautions. Exercises on reading the aneroid barometer
and obtaining barometric tendency. Principle, construction, corrections, errors,
maintenance and precautions for the thermometer, the wet and dry bulb hygrometer,
- 23 -
the Stevenson screen, the whirling psychrometer. Practical exercises on reading the
thermometer, the wet and dry bulb hygrometer and the whirling psychrometer.
16. The Ships Weather Code': Exercises in coding and decoding of ship's weather
reports.
Part 3: Signals and Radio Communications (Theory 30 hrs; Practicals 30 hrs).
17. Basic working knowledge of the GMSSS equipment and INMARSAT (25 hours).
VHF, VHF DSC and walkie-talkie use. (5 hours)
18. Use of the Signaling Lamp. Exercises on visual signaling using the Morse code. (18
hours)
19. Exercises on the recognition and single letter meanings of International Code Flags.
(12 hours)
Books recommended for reference
Marine Meteorology Plus Ship's Weather Code
Nautical Watchkeeping
Marine Sextant
Marine Chronometer
Marine Radar
Ship's Magnetic Compass
Regs For Prevention Of Collisions At Sea
(Rules Of The Road)
Nories Nautical Tables
Bridge Equipment & Watchkeeping
Ror Set Of Cards
Capt. H. Subramaniam
Capt. H. Subramaniam
Capt. H. Subramaniam
Capt. H. Subramaniam
Capt. H. Subramaniam
Capt. H. Subramaniam
Bhandarkar Publications
Capt. E. Fernandes
Bhandarkar Publications
- 24 -
(40 marks)
Question 1 (Compulsory)
Question 2a OR 2b (answer any one)
Question 3a OR 3b (answer any one)
Question 4a OR 4b (answer any one)
Part 2: Meteorology
10
10
10
10
(40 marks)
Question 5 (Compulsory)
Question 6a OR 6b (answer any one)
Question 7a OR 7b (answer any one)
Question 8a OR 8b (answer any one)
10
10
10
10
(20 marks)
05
15
- 25 -
Part 1: Cargo Gear Cargo Handling And Stowage (Theory 36 hours; Practicals 06
hours)
1.
Use of derricks, cranes on ships.
2.
Principal of the eductor system.
3.
Role of longshoremen, stevedores, foreman, ship's agent, supervisor.
4.
Overall procedure of loading, stowing and discharging of general cargoes.
5.
Procedure of preparing the hold for loading general cargo and bulk cargo. Necessity
and procedure for segregation of various types of dry cargoes.
6.
Various types of dunnage used. Securing of various types of cargo.
7.
Cargo sweat, ship sweat, atmospheric sweat. Precautions against cargo damage by
sweat.
8.
Unitisation of cargo by palletisation and Containerisation. Container ships.
9.
Carriage of Refrigerated Cargo.
10.
Stowage Factor and Load Density.
11.
Classification and Labeling of dangerous Goods.
12.
Procedure of keeping cargo watch in port.
Part 2: Oil, Gas and Chemical Tanker Familiarisation (30 + 30 + 30 hours each)
13.
Tank arrangements. Piping and pumping arrangements. Tank cleaning, crude oil
washing. Safety precautions, safety check lists.
14.
Pollution prevention (Marpol Annexes I and II)
Part 3: Passenger Ship Familiarisation (15 hours)
15.
NOTE: The Institutes that have formal DGS approval for the Oil, Gas and Chemical tanker
Familiarization Courses and for the Passenger Ship Familiarisation Course may issue
certificates for the respective courses. Institutes that do not have formal approval may
teach the subject concerned as per the guidelines of the respective familiarisation
courses.
Books recommended for reference
Nories Nautical Tables
Cargo Work
Seamanship - Theory and Practice
Capt. E. Fernandes
Danton
- 26 -
(50 marks)
(40 marks)
10
10
10
(10 marks)
- 27 -
Capt. H. Subramaniam
Kemp & Young
- 28 -
Note: Use of scientific calculator, Nories Tables and Hindship tables IS PERMITTED
(30 marks)
10
10
10
10
10
(20 marks)
(20 marks)
10
10
Numerical
Question 8a OR 8b (answer any one)
Question 9a OR 9b (answer any one)
Question 10a OR 10b (answer any one)
(30 marks)
10
10
10
- 29 -
- 30 -
Danton
- 31 -
(20 marks)
(30 marks)
(50 marks)
SAMPLE PAPER 2:
Safety, Legislation, Pollution Prevention Ship Operations
Duration: 3 hours
60
(20 marks)
10
10
(30 marks)
10
10
10
- 32 -
(50 marks)
10
10
10
10
10
(7 hours)
8. Air Compressor
8.1. State the safety precautions to be used while working with compressed
air.
8.2. Lists and explains hazards that can occur from compressed air
9. Advantages Of Pneumatics & Accessories Used
9.1. State the advantage and disadvantages of pneumatics
9.2. List various equipment operated by pneumatics such as pneumatics
wrench.
9.3. List the various accessories used in pneumatics.
10. Nomenclature & Symbols Used In Pneumatics
10.1.Explain nomenclature used in pneumatics as per New ISO and Old Letting
System
10.2.Describe symbols used in pneumatics. Show how they are different from
those used in hydraulics.
11. Circuit Tracing Maintenance & Fault Finding
11.1. Trace the simple pneumatic circuits
11.2. Explain the common faults occur in pneumatics and rectifications
11.3. State the care and maintenance of pneumatic system
12. Pneumatic Equipment & Accessories
12.1.Demonstrate ability clean system compressed air filters
12.2.Demonstrate ability to overhaul pneumatic tools / equipment such as
pneumatic torque wrench
Fitting Work Shop
Practical (7 hours)
- 34 -
13.3.Identify various nuts and bolts, studs and demonstrates their use.
13.4.Demonstrate use of grinding machine and drilling machine on the above
job.
13.5.Demonstrate the ability to make internal threads by using appropriate tap
13.6.Identify the parts of the lathe machine and demonstrates the safety
precautions to be observed while working on lathe machine
Welding Shop
Practical (7 hours)
- 35 -
Plumbing Shop
Practical (12 hours)
16.
Plumbing
16.1 Identify plumbing hand tools such as pipe wrench, dies, pipe benders,
hacksaw, pipe vice, spanners, etc.
16.2 Identify leak stopping material such as Teflon, sealant, araldite, jubilee
clips, etc. and demonstrate their use.
16.3 Demonstrate procedures to cut threads on pipes by selecting
appropriate die.
16.3 Demonstrate the ability to identify different pipes, pipe material and
methods to join the pipes.
16.5 Identify various taps, cocks and valves used in sanitary system
demonstrate ability to repair them.
16.4 Identify various plumbing accessories such as T joint, socket, reducer,
adapter, etc. used in pipe fitting and demonstrate its use.
16.5 Cut the gasket as per sketch by selecting appropriate material and tools.
16.6 Join the pipes as per drawing by using appropriate tools and
accessories.
16.7 Make fitting of working water closets / wash basin.
16.8 Demonstrate ability to identify water showers, mixers, and their repair.
16.9 Demonstrate the ability to clear choked pipes by using appropriate tool /
choke clearing material.
Carpentry Shop
Practical (12 hours)
17 Carpentry
17.1 Identify carpentry hand tools (chisel, jack plane, augur, mortise gauge,
etc.)
17.2 Identify various woods and plywood, veneers and wood treatment
materials.
17.3 Identify various wood jointing materials such as Fevicol, nails, screws,
etc.
17.4 Demonstrate the ability to make various wood jointing methods such as
mortise joint, dovetail joints, scarf joint, etc.
17.5 Demonstrate the ability to make a wooden box as per drawing by using
appropriate tools, wood jointing method and wood jointing material /
adhesives and a cement box.
17.6 Use clamps to stop a leak.
- 36 -
Computers
Theory - 6 hours classroom
Practical: (18
hours)
1. Basic Hardware Familiarisation
1.1. Handling the computer and its peripherals.
1.2. Booting. Common start-up errors and remedies. Connecting keyboard,
mouse, monitor, power cables, UPS to the computer and checking all
connections.
1.3. Keyboard layout and functions of different keys.
1.4. Proper shut down of PC, precautions to avoid an improper shut down.
1.5. Identifying the different hardware parts in the PC.
1.6. Determining the configuration of the PC.
2. Operating System
2.1. The Windows Operating System
2.2. Handling files and folders. Creating, opening, renaming and deleting files and
folders. Performing searches for specific files and folders.
2.3. Using common keyboard shortcuts to speed up operations.
2.4. Using Windows help.
2.5. Installing / uninstalling software.
2.6. Copying and burning of CDs.
2.7. Using Winzip software.
2.8. Internet and using a browser like Explorer.
2.9. Using email application program
2.10.Antivirus software and removal of virus from PC.
3. MS-Word
3.1. Creating and saving documentation in MS-Word.
3.2. Opening, finding, renaming files and folders.
3.3. Using Page Setup, Print Preview and Print commands.
3.4. Using Paragraph options, Bullets and Numbering
3.5. Format text using various options in Formatting Toolbar.
3.6. Checking spelling and grammar in the document.
3.7. Using Headers and Footers.
3.8. Inserting symbols and pictures.
3.9. Creating tables in MS-Word.
4. MS-Excel
4.1. Creating workbooks, working with rows, columns, cells and worksheets.
4.2. Inserting pictures and graphics.
4.3. Formatting of cells.
4.4. Using conditional formatting on data in cells
- 37 -
To
1.All Maritime Training Institutes,
2.All Academic Council
3.Nautical Adviser to the Government of India
4.Chief Surveyor with the Government of India
5.Computer Cell
6.Guard File
7.Sr.PS to DG(S) for information
- 38 -