Académique Documents
Professionnel Documents
Culture Documents
26-SAMSS-083
25 March 2009
Scope............................................................. 2
Conflicts and Deviations................................. 2
References..................................................... 2
Requirements................................................. 2
Qualification.................................................... 3
Identification................................................... 3
26-SAMSS-083
Diesel Engine Oil CH-4
Scope
This Specification describes the requirements of engine oil to be used in Caterpillar
direct injection diesel engines (except 3600 series) and other makes of diesel engines
requiring API CH-4 performance level crankcase oils.
An engine oil meeting this Specification is also suitable for use in the following types of
equipment: Allison transmissions requiring C3/C4 Fluid, Caterpillar hydraulic systems
and other mobile or marine hydraulic systems where a crankcase oil of SAE 15W/40 is
suitable, diesel engines requiring API CF-4 and CG-4 performance level crankcase oils
and gasoline engines requiring API SF, SG, SH and SJ performance level crankcase oils
where SAE 15W/40 is suitable.
An engine oil meeting this specification is not suitable for use in EMD engines.
Any conflicts between this Specification and other applicable Saudi Aramco
Materials System Specifications (SAMSSs), Engineering Standards (SAESs),
Standard Drawings (SASDs) or industry standards, codes and forms shall be
resolved in writing by the Company or Buyer Representative through the
Manager, Consulting Services Department, Saudi Aramco, Dhahran.
2.2
Direct all requests to deviate from this Specification in writing to the Company
or Buyer Representative, who shall follow internal company waiver procedure
and forward such requests to the Manager, Consulting Services Department,
Saudi Aramco, Dhahran.
References
Material or equipment supplied to this Specification shall comply with the latest edition
of the references listed below, unless otherwise noted.
American Society for Testing and Materials
ASTM D874
ASTM D2896
Requirements
The oil shall be blended from high viscosity index virgin basestocks free from
suspended solids, water and other impurities and formulated to meet the following:
Page 2 of 3
Viscosity Grade
26-SAMSS-083
Diesel Engine Oil CH-4
: SAE 15W/40
: 1.6 maximum
: 12 minimum
Qualification
The supplier shall provide evidence of qualification as stipulated above together with a
1-liter sample against which all supplies of the respective product must comply within
industry accepted tolerances. Initial qualification and any subsequent formulation
changes must be approved by the Responsible Standardization Agency.
Identification
Each container shall be marked respectively as follows:
Batch Number
25 March 2009
Revision Summary
Revised the "Next Planned Update". Reaffirmed the contents of the document and reissued
with no other changes.
Page 3 of 3