Académique Documents
Professionnel Documents
Culture Documents
Ms
Siguiente blog
Crear un blog
Acceder
TECHknitting
TECH-niques to turn HOME MADE knitting into HANDMADE knitting
F r i d a y, J a n u a r y 1 1 , 2 0 0 8
About Me
There are several versions and variations of 1x1 tubular cast on. A popular method is
Italian tubular cast on, and that is done over a knitting needle. Another method is like
a long tail cast on, and here is an excellent link, with a video. Yet a third method is
involves a provisional casting on, then picking up the loop tails, and here is a link to
that (scroll to last method).
And yet: even with all this expert, well-thought-out instruction available, and with all
these lovely methods and videos, I still (stubbornly, perhaps) prefer my own method
TECHKNITTER
WISCONSIN USA
best, a method I will call the "provisional tail" tubular cast on (to distinguish it from
the "provisional" method of the last link, above).
I find this method fast, easy to make and easy to withdraw the tail from. Like all
tubular casting on, this method creates a springy edge--as springy as if an elastic were
inserted--and has a pleasant-feeling rounded edge which stands up well to wear and
looks well.
Provisional tail tubular cast on is done in THREE PHASES:
The first phase consists of the cast on.
The second phase consists of four foundation rows: two on the front and two
on the back.
The third phase consists of the true 1x1 ribbing.
PHASE 1: CAST ON
1. (below) The first step is to knot together the casting-on yarn (the yarn for the
For ONLINE
TECHknitting
patterns--
*CLICK HERE*
together yarn ends AND operates the needle, your left hand anchors the other end of
*CLICK HERE*
both yarns, keeping them spread apart. (This will conceivably be easier for continental
knitters than for English-style.)
The hand set-up is very reminiscent of long tail casting-on, but the action is different.
Specifically, with the needle in your right hand, reach the needle's tip UNDER the
TECHknitter teaches-
*CLICK HERE*
provisional tail yarn (green) and OVER the garment yarn (blue). This will hook a loop
of blue over the needle. Withdraw the needle with the blue loop on it by moving the tip
of the needle once again UNDER the contrast yarn. The complete path of the needle is
shown by the red arrow. (To see greater detail, click any illustration, and each will enlarge to a
close-up.)
*Chronological Index
Re c e n t Po s t s
Zig-zag bands
Your steam iron: a
mighty weapon in the
fight agai...
Sewing shut hems and
facings (part 5 of
better cuf...
Negative ease and
positive ease
Knitting shut hems and
facings (part 4 of
"knittin...
2. (below) The result step 1, above, should be a single loop of blue yarn on the right
needle, anchored in place by the green provisional tail, as shown below.
To make the next blue loop, simply hook the needle tip UNDER the blue yarn,
following the path shown by the red arrow.
3. (below) Repeating steps 1 and 2 will result in blue loops over your needle,
alternating as "front side" loops and "back side" loops. In other words, there will be a
loop which has both tails stands IN FRONT of the green provisional tail, followed by a
loop with has both tail strands BEHIND the green provisional tail. In the illustration
below, the first stitch visible at the right is a "front side" loop, the second, a "back side"
loop, and so on, alternating.
As you can see, it is necessary to end with a front side loop, as back side loops (the
result of step 2, above) are not anchored.
4. (below) When you turn the work around after the cast on, you begin the first of four
foundation rows. As you can see, the first stitch on your right needle will be a back side
loop (ie: the reverse of the front side loop with which you ended in step 3). It would be
my advice to keep this stitch as a selvedge stitch, the foundation for a side seam of
chained selvedge stitches. Whatever edge treatment you choose, however, it will be
necessary to knit this first loop, in order to anchor it onto your needle. Specifically, to
work the foundation row, transfer the needle loaded with loops to your left hand, take
an empty needle in your right hand, and knit the first stitch, following the path of the
red arrow, as shown. The illustration shows continental knitting with its left-handed
yarn feed, but if you are knitting English style (throwing) the action of the right hand
and the path of the needle is identical--the only difference is that the yarn would feed
off the other hand.
5. (below) a. Knitting the edge stitch will anchor the first loop on your right needle, as
shown in illustration 5.
b. Once this selvedge stitch is knit, you will begin to establish a pattern, the first step of
which is to knit the front side loops--the "knit" looking loops. To knit, follow the path
shown by the red arrow.
ADDENDUM 12-12
I see from the comments that there is a certain lack of communication with steps 5 and
6. In step 5, as illustrated below, the knit-looking stitch is knit as ALL knits are knit,
that is, with the yarn held in the BACK--that is the blue yarn with the arrow hooked
around it.
6. (below) The second step in the pattern is to SLIP the "purls," the back-side loops.
Illustration 6, below, shows that the back side loop is simply being transferred from the
left needle to the right needle, while the working yarn is brought to the front, and then
held out of the way of the fabric--in the illustration, the yarn is being held below the
fabric--the point being that the "purls" are to be slipped, without involving the running
yarn in the process. In the transfer, the tip of the right needle inserts PURLWISE into
the loop to be slipped, which keeps the transferred back-side loop "open" (untwisted).
ADDENDUM 12-12:
Again, the comments show that steps 5 and 6 are, perhaps, not well communicated.
Here's the thing: AFTER you knit the knit-looking stitch (as shown in step 5), you
bring the yarn to the FRONT and THEN hold it out of the way while you slip the purllooking stitch to the right needle. When you let go of the yarn (in other words, after
you have slipped the stitch and you're done holding it out of the way) the yarn remains
on the front, yes. After step 6, however, you go back and repeat step 5, which, if you'll
recall, is a knit sort of stitch. But, you can't knit with the yarn in front of the fabric, so
you FIRST have to SWITCH the yarn to the BACK OF THE FABRIC before you can do
step 5. As stated, step 5 is then again followed by step 6, so you'd once again switch the
yarn forward to perform step 6, then switch back again for step 5, then switch forward
again for 6, and so on to the end of the row. If this addendum still doesn't clear things
up, someone write to me again in the comments, OK? Thanks!
7. Continue knitting the front-side loops, and slipping the back-side loops until you get
to the end of the row. This completes the first foundation row.
8. For the second foundation row, turn the work. Repeat steps 5 and 6. In other words,
turn the work as you did in step 4, then knit the front-side loops (which are actually the
loops you slipped in the first foundation row) and slip the back-side loops (which are
actually the stitches you knit in the first foundation row).
9. When you get to the end of the second foundation row, turn the work. You have now
established a pattern where the columns growing out of the front side loops are to be
knit, while the columns growing out of the back side loops are to be slipped. Repeat
this pattern for an additional two rows, alternating knits and slips. You should have
now worked a total of 5 rows: ONE cast on row, TWO rows of knitting the front side
loops and slipping the back-side loops, and TWO rows of knitting the stitches in the
columns growing out of the front-side loops, and slipping the stitches in the columns
growing out of the back-side loops.
PHASE 3: THE TRUE 1X1 RIBBING
Q&A
Q 1: What is all the slipping about? Why not just purl the back-side loops, instead of
slipping them?
A: The photo below shows the very edge of the tubular cast on: white stitches are cast
on over a maroon tail. As you can see, what you have actually done is cast on in the
middle of a fabric. In other words, the cast-on is a series of stockinette stitches which
lay across the provisional tail, and the loops on either side of the provisional tail are
actually the "heads" (front-side loops) and "tails" (back-side loops), of those stitches.
When you slip the back loops, you are skipping the tails, and knitting into the heads
only. When you turn and work back, you are skipping the heads, and knitting into the
tails only. By knitting and slipping, then slipping and knitting, you are knitting the
fabric out from the middle (In technical terms, you are creating two rows of "double-knitting.")
This fabric is half as wide on each face as single knitting, and twice as thick. Now
stockinette is very stretchy, and, this proportion: 1/2 the number of total stitches along
a thick edge, widening out to a single thickness fabric after several rows luckily turns
out to be the correct proportion for lovely stretchy edge. If you were to purl right away,
you would not have an nice, thick edge to stretch, you would have an thin, but wider
edge, which would tend to flare and ruffle.
A: By casting on in the middle of the fabric, you are actually knitting outwards in both
directions from the middle. When you begin the true ribbing--the k 1, p 1 ribbing, you
are uniting the two sides of the fabric, with the little scrap of knitting between the two
sides thus folded into a mini-tube. (The tube is the part where the provisional tail lies,
and when you pull out that tail, you are sliding the tail out of the tube.)
Q 3: Are there any tricks to this to improve the tubular cast on further?
A: YES! As stated in the directions, you ought to cast on over a thin yarn, but in
addition, you ought to cast on over a SMALL NEEDLE. I use a needle 3 sizes smaller
than the size in which I will knit the garment. I switch to a needle 2 sizes larger after I
have knit all four foundation rows--in other words, on the first true row of knit 1, p1
ribbing. By starting with a very small needle, I get a really springy cast-on which draws
in as well as if an elastic had been inserted.
Q 4: Why are the directions for back-and-forth knitting? Why no directions for
circular knitting?
A: Casting this on by this method on a circular needle will lead to a twisted mess
where the cast-on slides over onto the cable. I find it best to make the cast-on and four
foundation rows over a straight needle (or the straight portion of a circular needle) and
then switch to a knitting in the round. At the end, I use the hanging tail to sew up the
little gap at the bottom. (BTW: it is easy to hide the tail after sewing--just run it into
the tube at the edge of the ribbing!)
If you are a purist determined to try tubular cast-on in the round, consider casting on
over double pointed needles rather than circular needles. When you join, the first
foundation round is the same as the first foundation row (steps 5 b and 6) : knit the
front-side loops and slip the back-side loops. However, the second round differs. On
the second round, you must PURL the previously slipped stitches, while slipping the
previously KNIT stitches. Repeat these two rounds once more for a total of four
foundation rounds.
Q 6: Last question: this post started with three different methods of tubular cast on:
Italian, long-tail, and provisional and you have described a fourth method in this post-provisional tail. Why are there so many ways to create tubular casting on?
A: Actually, all four methods create more or less the same final result. I prefer the
provisional tail method detailed here because it goes faster than some; because it is
more elastic than some; because experience has shown me that 4 foundation rows are
just about right, and these foundation rows are easy to work (and count!) by this
method; and because the provisional tail is in a contrasting yarn, making it easier to
find and pull out. (However, truthfully: having tried them all, all these methods for tubular cast on
make a pretty good edge. Probably the most important reason of all that I prefer this method is because
it is what I am used to! And did I mention? It is fast.)
***
This is part 8 of a series. The other parts of this series are:
How to knit better bands and cuffs, part 1: Opera and Soap Opera (November 1, 2007)
*How to knit better bands and cuffs, part 2: Why cuffs and bands are wonky, and what
to do about it (November 14, 2007)
*How to knit better bands and cuffs, part 3: Hems and facings:(November 22, 2007)
*How to knit better bands and cuffs, part 4: Knitting shut hems and facings (December
9, 2007)
*How to knit better bands and cuffs, part 5: Sewing shut hems and facings (December
23, 2007)
*How to knit better bands and cuffs, part 6: Your steam iron: a mighty weapon in the
fight against curling and flipping (December 25, 2007)
*How to knit better bands and cuffs, part 7: Zig-zag bands (December 29, 2007)
*How to knit better bands and cuffs, part 9: Tubular cast off for 1x1 ribbing (it's pretty)
(January 15, 2008)
*How to knit better bands and cuffs: the wrap-up (January 23, 2008)
--TECHknitter
(You have been reading TECHknitting on: "Tubular cast on for 1/1 ribbing")
CONTENTS 2006-2015 BY TECHKNITTING@HOTMAIL.COM
49 COMMENTS:
Anonymous said...
How incredibly generous you are with your knowledge and time.
This is the best resource for serious knitters.
Thank you.
J A N U A RY 1 2 , 2 0 0 8 AT 9 : 0 4 A M
J A N U A RY 1 2 , 2 0 0 8 AT 1 : 3 9 P M
--TECHknitter said...
Hi Heather Madrone: It IS the same as the "invisible cast on," but in this application,
you immediately start knitting on BOTH sides, instead of knitting all on one side,
pulling out the provisional tail at the end and THEN knitting the live loops. It is also
the same technique as the "disappearing loop method" for casting on from the center-TECHknitting of February 15, 2007.
As far as your technique of casting this on over a circular needle cable: that's a great
idea.
Thanks for writing.
--TK
J A N U A RY 1 2 , 2 0 0 8 AT 2 : 4 9 P M
Pamelamama said...
Thanks!
J A N U A RY 1 2 , 2 0 0 8 AT 8 : 0 4 P M
gayle said...
Thank you for this tutorial! I was just preparing to cast on a sock, so this was very
timely advice. I've been using another version of the tubular cast-on, but it's quite a lot
fiddlier than this one.
I'd been knitting for close to 40 years before I even saw ANY version of tubular cast-on
- and what a forehead-slapping moment THAT was! "Why wasn't I told about this?!?"
So thank you very much! I'm always impressed by the clarity of your tutorials.
J A N U A RY 1 3 , 2 0 0 8 AT 1 : 4 7 P M
Anja said...
I just love your intructions! Every other post is a revelation, and then the next is a
confirmation that I'm not completely clueless, the blind follower of conventional
magazine patterns.
This method is my favorite, too, and I use a 2 mm circular for "waste yarn": with two
yarns I was sometimes confused which was which. Plus the stable cable makes the
moves easier, yet it wont be in the way when I start knitting.
J A N U A RY 1 4 , 2 0 0 8 AT 4 : 4 6 A M
carioca said...
Wow. I can tell you that I've been reading knitting books for years and producing
nothing more than the occasional clumsy scarf. I hate my ugly cast-ons and even more,
my ugly cast offs... THIS, though... THIS technique is the one that makes knitting
attractive enough to actually PRACTICE... thank you so much!
J A N U A RY 1 4 , 2 0 0 8 AT 4 : 4 8 A M
carioca said...
Which, by the way, means you must teach us to cast off in matching style... :)
J A N U A RY 1 4 , 2 0 0 8 AT 4 : 4 9 A M
Anonymous said...
Q's- If I do more rows of DK before true ribbing, will it be springier? I'm using 50%
alpaca/50% wool for some baby pants and I'm having a hard time getting the right
elasticized feel to the waist band, even when I do a twisted rib for a few inches and a
graduated rib down the body.
2nd- to ensure a stretchy waist, could I use an elastic cord as the waste yarn and just
leave it and join together? Children aren't gentle with clothing, they get really stretched
out.
J A N U A RY 2 9 , 2 0 0 8 AT 3 : 3 1 P M
Carolyn said...
Is it correct (for this type of tubular cast on) that I should cast on 1/2 of the stitches
that is called for on my pattern?
S E P T E M B E R 7 , 2 0 0 8 AT 5 : 1 9 P M
Gina said...
I have done the tubular cast-on in the round on circs and it is easy as pie and looks
great.
O C TO B E R 3 1 , 2 0 0 8 AT 1 2 : 2 5 P M
Judi P said...
I'm having a hard time wrapping my head around the words that go with illustration 6
in the provisional tail tubular cast-on. The words say to hold the working yarn in front
as you slip the stitch, but the only way I can get my yarn to look like the illustration is
to hold it in back. Granted, I can't hold it down below the knitting with my left index
finger the way the illustration shows, but if I use my finger like that, the working yarn
comes in front of the provisional yarn, which is not what it looks like in the illustration.
Guessing that you're not going to get my question tonight, so I'll forge ahead. I'm
further guessing that since your illustrations are so amazing, that the image is more
--TECHknitter said...
Hi Judi: Thank you for drawing attention to the inartful phrasing of the text which
accompanied the sixth illustration. The text has been corrected, and I thank you for
bringing it to my attention, that was kind. I am glad you like the method overall.
Thanks again,
--TK
J A N U A RY 2 6 , 2 0 0 9 AT 9 : 2 5 A M
Laurie said...
Could you take a look at Eunny Jang's tubular cast on video on Youtube? She describes
casting on with half the final desired number of stitches with waste yarn, knitting
several rows, then knitting with your main yarn (starting with a purl row). She notes
purl bumps to pick up and knit. But I've gone through this over and over, and the
number of purl bumps ends up being one short. Can you analyze this and tell me what
I'm doing wrong? Many thanks!
M AY 3 , 2 0 0 9 AT 5 : 0 6 P M
--TECHknitter said...
Hi Laurie; You aren't doing anything wrong. The fact is, when you pick up and knit the
purl bumps, you'll always have one fewer stitches than when you knit the knit stitches.
For the reason that this is so, you can look at the TECHkntiting post of 12/07/08,
provisional casting on, knitting up vs. knitting down. See, what you're doing with that
method of cast on is knitting the knit stitches "up," and the purl stitches "down," and
then joining them to make the tube. To solve the problem, you have to fudge a little,
preferably on the purl side.
Thanks for writing--TK
M AY 3 , 2 0 0 9 AT 1 0 : 5 8 P M
Laurie said...
Thank you! I don't understand why I (always) need permission to fudge, but I
understand what you are saying. And it helps to know that the purlside is the place to
do it.
M AY 4 , 2 0 0 9 AT 4 : 4 9 P M
sajbat said...
hi! thanks for the awesome tutorial! One question--I've read the comments about
holding the yarn in front vs. back, but I'm not sure I quite get it--when slipping the
purls do you hold the yarn in front or back? Even if you let it hang loose, that is
tantamount to holding it in back since that's where the yarn will be carried to the next
stitch, no? Or am I missing something?
J U LY 1 3 , 2 0 0 9 AT 1 0 : 2 0 P M
--TECHknitter said...
Hi Sajbat: The yarn will hang below the cast on if you leave it loose. As far as the
"front" and the back" goes, you are correct that the yarn will go to the back with the
NEXT stitch. The real point is to strand the yarn between the knit stitches, as you
correctly suspect.
--TK
J U LY 1 4 , 2 0 0 9 AT 6 : 5 1 A M
Kenny said...
Do you have a method for tubularly casting on for a 2x2 rib?
J U LY 2 7 , 2 0 0 9 AT 6 : 5 4 P M
djaj said...
This is great and looks so easy !
Just one more questions : if I need to work in garter stich, is this cast-on appropriate ?
And one more question : compared to the final number of stiches needed, how many
stiches should be casted on ?
S E P T E M B E R 2 4 , 2 0 0 9 AT 8 : 1 2 A M
--TECHknitter said...
Hi Djaj: In the tubular cast on, the very edge is a little scrap of stockinette. The next
part is a little scrap of ribbing. The overall look is that the work starts with ribbing. If
you like that look for a garter stitch garment, then it would be OK.
However, if you want a cast on edge which looks like garter stitch right from the
beginning, then consider a ROLLED EDGE (TECHknitting post of November 14, 2007-scroll to the bottom) or the EASY-PEASY REVERSE STOCKINETTE EDGE
(TECHknitting post of February 15, 2008).
Both the rolled edge and the easy-peasy have the reverse stockinette on the outside of
the garment, and reverse stockinette looks very much like garter stitch. In other words,
if you use either of these casts on, your garter stitch garment will look as if it were
garter stitch right from the beginning.
--TECHknitter said...
OK, so the thing is that you want the strands to be BETWEEN the knits and the purls.If
you can see the strands, you're carrying the yarn in FRONT or in BACK of the stitches,
rather than in the little tube that you're making--the tube is between the knits and the
purls.
S E P T E M B E R 2 7 , 2 0 0 9 AT 3 : 2 9 A M
msHedgehog said...
I do love this. It took me a couple of attempts to work out how to join it neatly into the
round, but I think I've cracked it. You have to cast on an odd number anyway, for the
reasons you explained above. I realised that means that when I want to start ribbing I
can arrange it on magic loop so that the two ends are both knits facing out towards me
in the middle of a needle, with my yarn coming from the right. Then I can slip the first
one, p1k1 all the way around to the final p, then knit two together across the gap.
Looping the tail through the bottom stitch joined up the gap beautifully without the
lumpiness of my first attempts.
O C TO B E R 4 , 2 0 0 9 AT 4 : 2 1 A M
lisa said...
Arrgh, I guess I am no tthe only one who is havin gproblems with this cast on. It looks
beautiful when you do it, but I can't seem to get it right. I have had several false starts
with a practice hat. I am having issues with steps 5 & 6. I knit the continental way. I get
the knit, but when I slip the "purl," the working yarn can either be in front of (as if I
was actually purling the stitch) or behind the loop, which creates a purl bump on the
other side. I can't figure what else to do with the working yarn while slipping the purl
stitch. I am completely confused by the picture, because there is no physical way I can
"flow" the working yarn into the position you have in the illustration. What am I doing
wrong? :(
Thank you SO much :)
O C TO B E R 3 0 , 2 0 0 9 AT 1 1 : 2 2 P M
--TECHknitter said...
Hi Lisa--I am at a loss why these pictures are confusing, but confusing they MUST be!
Perhaps ignore the pictures and try to follow the written directions?
I assume from your comment that you have gotten as far as illustration 4, yes?
OK, If you look at your needle, you should see that some stitches look like they are "on
the front" and some like they are "on the back," as shown in illustration 4. Now the
thing to do is to KNIT the knit looking ones, and then to SLIP the ones on the back--the
purl looking one-- to slip these without knitting, without purling, without twisting--just
by transferring each from the left needle to the right needle as you come to it. So, it
goes: Knit 1, slip 1, knit 1, slip 1, etc, all the way down the row.
Next, turn the work over. This time, you will KNIT the stitches on the front (the ones
you slipped last time) and SLIP the stitches on the back (the ones you knit last time).
(A brief aside: The reason you aren't purling anything on row 1 or 2 is because a purl is
the opposite of a knit, so when you flip the fabric, your knits are seen as purls.)
Anyhow, you now continue in this pattern, knitting a front-side knit, slip the following
stitch, knit a front side stitch, slip the following stitch, and so on, all the way to the end
of each row until you have worked a total of 5 rows: The cast one row, turn the work,
one row of knit, slip, knit, turn the work, a second row of knit, slip, knit, turn the work,
a third row of knit, slip, knit,turn the work, a fourth row of knit, slip, knit. Now you are
ready to go on with phase 3 from the post.
Of course, depending on whether you have created an odd number of stitches or an
even number of stitches, you might have to start off with a slip rather than a knit, but
as long as you knit the front-laying stitches and slip the back-laying ones, you should
be ok.
Write again if this doesn't help, OK?
--TK
O C TO B E R 3 1 , 2 0 0 9 AT 8 : 5 3 A M
Knit and purl the remaining foundation rows in 2x2 rib instead of 1x1. This makes for a
really nice elastic edge.
I'm not sure why everyone is so opposed to doing this cast-on in the round. I do it all
the time and it doesn't seem particularly hard. One note, however, to those who
attempt this: if you want to see the knit side of the fabric rather than the purl side, you
have to move the yarn in a counterintuitive fashion while knitting the foundation rows.
It is very easy to think "k1, sl1" or "p1, sl1" but in fact it must be "k1, bring yarn to front,
sl1, bring yarn to back" and "p1, bring yarn to back, sl1, bring yarn to front". This is a
pain but the end result is much prettier and all the longer strands are hidden in the
middle of the tube.
N O V E M B E R 1 3 , 2 0 0 9 AT 3 : 1 7 A M
Laundress said...
Alas! Four times I tried this method to cast on for a hat and four times I have been
unsuccessful. It does not create ribbing at all. Somehow I just can't seem to process
what are excellent instructions in a way that has the desired effect.
D E C E M B E R 3 1 , 2 0 0 9 AT 9 : 3 7 P M
Judith said...
I know I'm way out of date, but when I need a new technique I always come and see
what TECHknitter has devised.
I see there is some gnashing of teeth here in the comments, and having tried the
technique two ways I think I see an answer. As an English-style knitter, I found that in
step 6 I had to pass my working yarn in front of each slipped back side loop and then
back again to knit the next front side loop. I keep trying to teach myself to work
Continental style for ribbing as it is more efficient at transferring from knit to purl, and
maybe this is why TECHknitter hasn't had an issue here.
Also, in the instructions for step 4, the last sentence above the illustration should read:
"The illustration shows continental knitting with its LEFT-handed yarn feed, but if you
are knitting English style (throwing) the action of the right hand and the path of the
needle is identical--the only difference is that the yarn would feed off the RIGHT
hand."
O C TO B E R 9 , 2 0 1 0 AT 1 : 4 6 P M
Anonymous said...
I love this cast on. It genuinely feels like there is elastic in it. I'm struggling to
remember it and have to fully concentrate when casting on the stitches originally!
Always having an odd number also is difficult for some patterns. Would you increase
straight away so all the rib has the correct number of stitches?
N O V E M B E R 4 , 2 0 1 0 AT 6 : 4 3 A M
KT said...
I was having the same problem as sajbat and lisa. Rose Fox's description of moving the
yarn to front before slipping is right on, regardless of whether you are knitting round
or flat, continental or english. Now I'm off running - thank you TECHknitter and
commenters.
O C TO B E R 2 , 2 0 1 1 AT 7 : 1 7 P M
anna said...
I figured out the yarn needs to be in front of the work when a stitch is slipped and now
I see you amended words back in 2009 obscuring this fact.
Based upon text and pictures I had not picked up on this (and I followed the pictures
very good and concentrated) and the yarn created bumpy flows on the back of the
work, not giving ribbing but more something resembling reverse stockinette.
Now I tried it bringing it to front (when slipping) and back (when knitting) I am getting
the desired colomns. :)
I love to understand and learn about good hems and borders. Thank you very much :)
J A N U A RY 5 , 2 0 1 2 AT 9 : 5 1 A M
Anonymous said...
Hi!
Please correct instructions for illustration 6 as per the two comments above. The yarn
must be moved to the front of the work to slip the "purl looking" stitches, and in back
to knit the "knit looking" stitches. I've wasted a lot of time figuring this out, and yours
are the only instructions I've been able to find online for this 1x1 ribbed cast on.
Please correct these so others are not frustrated and discouraged! Especially knitters
not as experienced as some of us here. ;)
D E C E M B E R 9 , 2 0 1 2 AT 1 0 : 1 0 A M
TECHknitter said...
Hi Anon and others: I have added two addendums to the text, trying to do a better job
of communicating what has to happen with the running yarn between the repeats of
step 5 and step 6. If these addendums still don't clarify the motions, please write again
to alert me, OK? Thanks so much for everyone's comments and suggestions for better
text. --TK
D E C E M B E R 1 3 , 2 0 1 2 AT 8 : 4 5 P M
cbvwew said...
First of all, just Thank You. Thank You. Can't find words to say more....
... other than to ask a couple of questions: I have a pair of commercially knitted thick
wool socks that LOOK like they've used a tubular cast on, with a small piece of elastic
thread *inside* the "tube", where your cast-on yarn is, just not pulled out. As if they
used the elastic thread as the cast-on "waste" piece. So,
1) Does this sound reasonable and logical, is this likely what I'm seeing, am I
interpreting it correctly?
2) Is it worth doing with hand-knit socks? Or do "properly fitted" socks just fit well
enough that adding elastic is overkill? (I'm just starting my sock adventures, not sure
how crazy I need to get here)
3) Assuming this is something I want to do, is this type of -- what would you call it?
sock elastic? elastic thread? -- something that I could find at a full-service yarn store?
Did I say Thank You enough? Most thorough technical descriptions I've found....
J A N U A RY 2 3 , 2 0 1 3 AT 6 : 1 4 P M
TECHknitter said...
Hi cbvwew, you are welcome, and welcome to TECHknitting blog. As far as elastic
goes, yes, you can use thread elastic as the waste yarn and leave it inside, but the
trouble is connecting the two ends of the elastic: knotting them together leaves a lump,
sewing them together comes undone. Experiment and see if you like the effect. Here is
a further post with more information on elastic in socks (and yes, hand-made socks fall
down every bit as much as any other kind!)
http://techknitting.blogspot.com/2011/02/socks-falling-down-consider-elastic.html
Best, TK
J A N U A RY 2 3 , 2 0 1 3 AT 9 : 1 1 P M
sidekick! said...
I just used this cast on to start a 1x1 ribbed sweater knit from the bottom up. The cast
on edge is beautiful! Thanks for the great instructions.
J A N U A RY 2 9 , 2 0 1 3 AT 1 : 2 4 P M
Anonymous said...
I just used this cast on to start a 1x1 ribbed sweater in bulky yarn knit from the bottom
up. The cast on edge is beautiful. Thank you for the article and addenda.
J A N U A RY 2 9 , 2 0 1 3 AT 1 : 2 8 P M
Tanya said...
Hi! Thanks for this tutorial. I have a question. What do you do with the selvedge stitch.
In the pattern I am working, it won't be incorporated into a seem so I need for it to "go
away". I tried to knit it together with the neighboring stitch but when I pulled the waste
yarn from the cast on out, it unravelled. Any ideas? Thanks.
M A R C H 2 8 , 2 0 1 4 AT 1 2 : 5 9 P M
TECHknitter said...
Hi Tanya--I'm not sure I'm following what you want to do? My e-mail address is in the
sidebar--maybe write to me there and send a photo? Best, TK
M A R C H 3 1 , 2 0 1 4 AT 9 : 5 5 A M
J U N E 9 , 2 0 1 4 AT 1 1 : 5 1 A M
TECHknitter said...
Hi Sanju: Unfortunately, I do not know a 2/1 tubular cast on. Perhaps consider
working 1/1 for a few rows, switching to 2/1 thereafter? Alternatively, a hem will
preserve the 2/1 pattern right around the edge. On so small an item as a golf club sock,
a knitted-shut hem will work fine.
http://techknitting.blogspot.com/2007/12/knitting-shut-hems-and-facings-part4.html
(You'll have to cut and paste the link into your browser window, I don't know how to do
live links in the comments, sorry...)
Best, TK
J U N E 1 7 , 2 0 1 4 AT 7 : 5 7 A M
C R E AT E A L I N K
<< Home
A L L C O N T E N T C O P Y R I G H T, T E C H K N I T T I N G A N D T E C H K N I T T E R A R E R E G I S T E R E D U S T R A D E M A R K S