Académique Documents
Professionnel Documents
Culture Documents
Accessories
Pulling arm system, PULL • Extension unit EXA – to be used
if additional functions are required,
e.g. presence impulse, presence
detection etc.
• Control unit CSDA-F – to be used
e.g. when the operator is installed
on fire or fume gas protected doors,
or for connection of 24 V AC to an
electric striking-plate.
• Coordination unit COOA which
ensures that rebated doors close in
correct order.
• Besam’s range of manual and auto-
Design Arm systems matic activation units.
The compact Besam PowerSwing • PUSH – Pushing arm system, where • Impulse and presence detection
is supplied for different doors and the operator is installed on the wall sensors.
customer requirements. The operator on the opposite side of the door • “Push and go” which means that
works electro-hydraulically. It opens swing. Door opening angle adjust- the door opens automatically from
with motor and closes with spring. able up to 120°. closed position if manually pushed.
The opening and closing speeds can • SAS-F – Pushing arm system, used • Programme selectors.
be varied individually. The motor, oil for fire approved doors where the • Arm stop.
pump and hydraulic unit are com- operator is installed on the wall on
bined into a compact unit mounted the opposite side of the door swing. Technical data
next to the control unit within the Door opening angle adjustable up to • Power supply: 230 V AC, 50 Hz
cover. The operator is connected to 120°. 120 V AC, 60 Hz
the door leaf with either a pushing or • SAS-F-5 – Pushing arm system, • Auxiliary voltage: 13-20 V DC
a pulling arm system. where the operator is installed on 24 V DC
the door leaf on the same side as • Power consumption: max. 230 W
Models the door swing. Door opening angle • Ambient temperature: -15° to +50°C
• PowerSwing – for single doors – adjustable up to 105°. • Recommended max. door weight:
one drive unit and one control unit • PULL – Pulling arm system where 250 kg for door leaf width 1600 mm
fitted under a standard length cover. the operator is installed on the wall • The PowerSwing meets require-
• PowerSwing-Special – for single on the same side as the door swing. ments for door weights/widths
doors – one drive unit and one con- Door opening angle adjustable up to stated in the:
trol unit fitted under a cover with 120°. - Controlled door closing,
optional length. • Shaft extensions – Allow the ope- EN 1154 size 3 – 6
• PowerSwing-2 – for double doors rator to be fitted higher on the wall - Electrically powered hold open
– two drive units with control unit or the arm lower on the door leaf. device for swing doors,
and slave control unit fitted under a EN 1155
Rights reserved for modifications of design and dimensions
cover with optional length for paral- Fire doors - Coordination unit for rebated doors,
lel operation of two doors. The PowerSwing offers fire rating EN 1158
and is approved for fire door instal- - Türschliesser mit Öffnungs-
lations by the German and Swedish automatik (Drehflügelantrieb),
authorities. DIN 18263-4 AU Grösse 3 – 6
- ANSI/BHMA A156.10, A156.19
- UL325/CUL325
- SITAC 0166/99
IAA005EI Besam 0004
Besam Export AB
Box 669
SE-261 25 Landskrona, Sweden
Tel: +46 418 514 00
Fax: +46 418 513 55
e-mail: export@besam.se
www.Besam.com