Académique Documents
Professionnel Documents
Culture Documents
Unit 1: Terminology
Terminology
3:25
TC
I/P
Heat exchanger
Manipulated variable
(saturated steam)
controlled variable
(temperature of
sterilised saline)
95C
(Flow, temperature
of saline solution)
80C
100C
30C
100 L/min
Load variable
TT
Uncontrolled variable
(Saturated steam)
Controlled
variable
Manipulated
variable
Sym: c, PV
Sym: m, CO, MV
The parameters
that
indicate
product quality or
the
operating
condition of the
process.
(L.M.
Gordon)
A process being
adjusted (controlled)
by a final control
element (such as
control valve,
damper, motor
speed).
Load variable
Set point
Sym:
Sym: r, SP, SV
All other
affecting
variable, other
than the one
being
manipulated.
(L.M. Gordon)
The desired
operating
condition.
3:25
TC
I/P
Heat exchanger
TT
Manipulated variable
(saturated steam)
Load variable
(Flow of saline solution)
80C
100C
30C
100 L/min
controlled variable
(temperature of
sterilised saline)
95C
Manipulated variable
(Saturated steam)
Merit?
Simple design. Easy to tune (for linear, fast &
short deadtime processes: flow, level &
pressure).
Demerits?
Slow recovery for slow process such as
temperature control upon load disturbance or
change in setpoint. A process with long deadtime
may exhibit oscillatory process response with
long settling time.
The Process
Saline solution at 30C is sterilized by
heating the solution in a heat-exchanger
system to 80C. The temperature of the
sterilized saline solution is maintained by
regulating the control valve of steam input
to the heat-exchanger.
Cascade control
I/P
FC
FT
FSP
Heat exchanger
TC
TT
Manipulated variable
(saturated steam)
Load variable
(Flow of saline solution)
80C
100C
30C
100 L/min
controlled variable
(temperature of
sterilised saline)
95C
Manipulated variable
(Saturated steam)
Demerits?
Controllability will be worst than SISO if both
controllers were not properly tuned.
Cp
Hs
I/P
FFC
W p T2 T1
Manipulated variable
(saturated steam)
Load variable
(Flow of saline solution)
30C
100 L/min
FTTT
Heat exchanger
controlled variable
(temperature of
sterilised saline)
95C
Merit?
Faster recovery than cascade or SISO.
Compensate for disturbances before they effect
the controlled variable.
80C
Manipulated variable
(Saturated steam)
Characteristic of feedforward
control:
Measurements of load variables online and
Utilization of computational blocks.
Demerits?
Cannot work if any of the sensors fail esp. load
variable.
Requires process model in order to design
feedforward system.
Abdul Aziz Ishak, Universiti Teknologi MARA Malaysia (2009)
Hs
I/P
W p T2 T1
+
+
FFC
TC
TT
Manipulated variable
(saturated steam)
Load variable
(Flow of saline solution)
30C
100 L/min
FT TT
Heat exchanger
80C
controlled variable
(temperature of
sterilised saline)
95C
Merit?
Feedforward control compensates for major
disturbances, while feedback control compensates
for all other disturbances.
Manipulated variable
(Saturated steam)
FC
I/P
X
FT
Manipulated variable
(saturated steam)
Wild flow
(Flow of saline solution)
FT
Heat exchanger
30C
100 L/min
controlled variable
(temperature of
sterilised saline)
95C
80C
Merit?
Keep two flow in proportion.
Demerits?
Inherits PID characteristics
Manipulated variable
(Saturated steam)
Ratio Control
multiplier
divider
Divider
BLOCK DIAGRAM
Feedback control
Y(s)
Feedback
controller
Process
Feedforward control
D
Y(s)
Feedforward
controller
Process
Cascade control
Y(s)
Primary
controller
Secondary
controller
Process II
Process I
Question
- How to ensure that the level in the tank remains at
or near the set point? Propose the following
control strategy:
- Feedback
- Feedforward
- Feedforward/Feedback