Académique Documents
Professionnel Documents
Culture Documents
techniques to analysis
Modification History Not
applicable.
Unit Descriptor
Unit descriptor
MSL977006A
Sejarah perubahan
Tidak berlaku
Deskripsi unit
Deskripsi unit
Penerapan unit
Penerapan unit
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Prerequisite units
Informasi lisensi/peraturan
Tidak berlaku
Pra-syarat
Unit-unit pra-syarat
Kelayakan kerja
Elemen yang
menjelaskan
manfaat dari unit
kompetensi
2. Prepare samples
and standards
3. Set up instrument
and perform trial
analysis
PERFORMANCE CRITERIA
1.1. Interpret client request and/or identify sample
characteristics that may affect sample preparation and/or
analysis
1.2. Liaise with client or sample provider to review client needs,
testing requirements and sample history. if necessary
1.3. Identify analytical standards, reference materials, test
methods and enterprise procedures that may be applicable
ct the most appropriate standard test method that is consistent with
testing requirements and
1.4. instrument availability
1.5. If no standard method exists, adapt or modify a test method
to suit the sample characteristics
2.1. Log sample into instrument software
2.2. Obtain a representative analytical portion of the
laboratory sample
2.3. Prepare sample in accordance with selected test method
2.4. Prepare validation checks and/or calibration standards
for analytical portions
2.5. Use specialised procedures for ultra trace sample and
standard preparation as required
3.1. Configure the gas flow, injector, column, oven and detector
sub-systems according to the selected test method
3.2. Perform pre-use, calibration and safety checks using
enterprise procedures
3.3. Set instrumental parameters in accordance with those
specified in selected test method
3.4. Check and optimise each instrument sub-system 3.5.Select
an appropriate internal standard, if required
3.5. Conduct performance tests using (internal
standards), standards and samples
3.6. Assess instrument performance in terms of response,
resolution and run-time
2. 2. Mempersiapkan
contoh dan standar
3. 3. Menyiapkan
instrumen dan
melaksanakan analisis
3.2
percobaan
3.3
3.4
3.5
3.6
3.7
ELEMENT
PERFORMANCE CRITERIA
4. Optimise
instrument
performance
5. Perform analysis
6. Perform routine
maintenance
and troubleshoot
instruments
ELEMEN KOMPETENSI
4.Optimalisasi unjuk kerja
instrumen
5. Melaksanakan
analisis
6. Melakukan
pemeliharaan rutin
dan perbaikan
instrumen
ELEMENT
PERFORMANCE CRITERIA
6.6
6.7.
7.1.
7.2.
7.3.
7.4.
7.5.
8. Maintain laboratory
records
8.1.
8.2.
8.3.
8.4.
ELEMEN KOMPETENSI
7. Menjaga lingkungan
kerja agar tetap
aman
penanganan/persiapan
metode pengujian.
7.2 Peralatan
pelindung
diri
contoh
dan
dan
prosedur
dalam
sistem
informasi
manajemen
laboratorium.
8.2 Catatan pemeriksaan kalibrasi, penggunaan, dan
pemeliharaan
instrumen
dipelihara
sesuai
Required knowledge
Required knowledge includes:
Mencatat
dan
melaporkan
data/hasil
menggunakan
prosedur
perusahaan;
retention times, peak widths, peak asymmetry, capacity factor k' and resolution
hot direct
split/splitless
solid phase micro-extraction (SPME)
program temperature vaporisation (PTV)
gas desorption
on column
packed columns
gas inlets, septum, septum purge, injector insert, heater block, tubing materials,
column connection, split valve and vent and compatibility of connectors
gas,
seperti
pengeringan,
penggunaan
oksigen/kelembaban/penangkap
hot direct
split/splitless
on column
packed columns
computer control software for operating and optimising instrument (peak detection and
integration, drift parameters, baseline correction and instrument/integrator zero)
procedures for optimising instrument performance such as:
investigation of elution order
Evidence Guide
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction
with the performance criteria, required skills and knowledge, range statement and the
Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for
assessment and evidence required
to demonstrate competency in this
unit
Panduan penilaian
PANDUAN PENILAIAN
Panduan penilaian memberikan petunjuk tentang asesmen dan harus dibaca
terkait dengan kriteria unjuk kerja, keterampilan dan pengetahuan yang
diperlukan, batasan variable dan pedoman asesmen untuk paket pelatihan.
Tinjauan asesmen
Aspek penting dalam
asesmen dan bukti yang
diperlukan untuk
menunjukkan kompetensi
dalam unit ini
menafsirkan
permintaan
pelanggan,
metode pengujian, dan prosedur dengan
akurat;
mempersiapkan,
menyalakan,
dan
mematikan
instrumen
dengan
aman
menggunakan prosedur perusahaan;
mempersiapkan
sampel
dan
standar
kalibrasi sesuai dengan metode pengujian;
mengoperasikan
peralatan
untuk
memperoleh
data
yang
valid
dan
terpercaya;
ketertelusuran
dan dokumentasi;
Unit
kompetensi sampel
ini diasses
di tempat kerja
atau disimulasikan sesuai lingkungan kerja.
Unit kompetensi ini dapat diasses dengan:
MSL977003A
Berkontribusi
dalam
validasi metode pengujian
MSL977004A
Mengembangkan
mengadaptasi analisis dan prosedur
atau
EVIDENCE GUIDE
Resources may include:
laboratory with specialised analytical
instruments laboratory reagents and equipment
Method of assessment
PANDUAN PENILAIAN
Metode asesmen
Praktek
kompetensi
Tuntutan
membaca
dan menghitung
suatu
Perwakilanbahasa,
industri
telah memberikan
studidari
kasus
di
bawah ini untuk menggambarkan aplikasi praktis dari
unit
kompetensi
ini
dan
untuk
menunjukkan
relevansinya dalam pengaturan tempat kerja.
Pengujian lingkungan
Suatu laboratorium secara rutin menganalisis sampel
bahan pangan untuk residu pestisida. Berdasarkan
EVIDENCE GUIDE
combined with ECD and FID detectors to quantify one
or two classes at a time. Recently, the laboratory has
commissioned a new GC-MS instrument that is
capable of quantifying low level pesticides using the
SIM mode while simultaneously performing
quantification of higher concentrations using full-scan
(SIFI single ion and full ion) acquisition. The
technician sets up for a typical run of samples. He/she
uses the programmable split/splitless injector to provide
1L samples. The injection port temperature is set at
275C (isothermal) and the capillary column uses a
phase specifically designed for separation of pesticides.
The helium carrier gas is programmed with a constant
velocity of 30 cm/s. The oven temperature program is
initially set to 80C with no hold and ramped to 290C
at 20C/min with a hold of 4.5 min. The total oven
program is 15 min, with an injection to injection time
of less than 20 min. The MS method contains multiple
SIM functions overlapped by a m/z 40 to m/z 450 full
scan function and the mass spectrometer transfer line
and ion source are heated to 275C.
Pharmaceutical testing
A laboratory technician working for a major cosmetics
company is given a retail sample of a competitor's
perfume and asked to determine its composition.
He/she has to start somewhere and decides to use one
of the laboratory's GC-MS instruments to simplify the
identification process and to avoid the need for
multiple spikes. The GC-MS is already set up to
measure the company's own perfume and so the
technician uses standard instrumental parameters as a
starting point. However, he/she finds that many peaks
are not resolved and some take a long time to elute.
The technician realises that he/she should either
modify the temperature and/or pressure programming
or change columns. Sensibly, the technician chooses to
modify the easiest parameter (i.e. temperature) before
changing the column. This overcomes the problem of
slow elution but does not resolve all peaks. He/she then
varies the pressure programming which provides better
resolution but does not completely separate all peaks.
The technician then uses the instrument's spectral
matching software to identify as many peaks as
possible, including the ones that overlap.
PANDUAN PENILAIAN
digabungkan dengan detektor ECD dan FID untuk
mengkuantifikasi satu atau dua kelas pada satu waktu.
Baru-baru ini, laboratorium tersebut telah menyetujui
pembelian instrumen GC-MS baru yang mampu
mengkuantifikasi
pestisida
dalam
jumlah
kecil
menggunakan mode SIM, sementara secara bersamaan
melakukan kuantifikasi konsentrasi yang lebih tinggi
menggunakan pindaian penuh (SIFI ion tunggal dan ion
penuh). Teknisi menyiapkan sederet sampel yang lazim. Ia
menggunakan
injektor
split/splitless
yang
dapat
diprogram untuk menyediakan1L sampel. Suhu port
injeksi diatur pada 275C (isotermal) dan kolom kapiler
menggunakan fasa (diam) yang secara khusus dirancang
untuk memisahkan pestisida. Gas pembawa helium
diprogram dengan kecepatan konstan, yaitu 30 cm/s detik.
Suhu oven awalnya diprogram pada 80C tanpa di tahan
dan menaik secara linear menjadi 290C dengan kenaikan
20C/menit dan suhu ini dipertahankan selama 4,5 menit.
Total program suhu untuk oven adalah 15 menit, dengan
waktu injeksi ke injeksi kurang dari 20 menit. Metode MS
berisi berbagai fungsi SIM yang beririsan dengan fungsi
pindaian penuh 40 m/z sampai 450 m/z dan jalur transfer
spektrometer massa dan sumber ion dipanaskan hingga
275C.
Uji farmasi
Seorang teknisi laboratorium yang bekerja untuk
perusahaan kosmetik besar diberi sampel retail dari
parfum kompetitor dan diminta untuk menentukan
komposisinya. Ia harus segera mulai dan memutuskan
untuk menggunakan salah satu instrumen GC-MS
laboratorium untuk menyederhanakan proses identifikasi
dan menghindari perlunya spike berkali-kali. GC-MS sudah
disiapkan untuk mengukur parfum perusahaannya.
Karena itu, teknisi tersebut menggunakan parameter
instrumental standar sebagai titik awal. Namun, ia
menemukan bahwa banyak puncak tidak terpisahkan dan
beberapa puncak membutuhkan waktu lama untuk dapat
terelusi. Teknisi tersebut menyadari apakah ia harus
memodifikasi menggunakan suhu dan/atau tekanan yang
diprogram atau mengganti kolom. Secara logis, teknisi
tersebut
memilih
untuk
memodifikasi
parameter
termudah (yaitu suhu) sebelum mengganti kolom. Hal ini
mengatasi masalah elusi yang lambat, tapi tidak
memisahkan semua puncak. Ia lalu mengubah tekanan
yang diprogram untuk memberikan resolusi yang lebih
Range Statement
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work
environments and situations that may affect performance. Bold italicised
wording, if used in the performance criteria, is detailed below. Essential operating
conditions that may be present with training and assessment (depending on the work
situation, needs of the candidate, accessibility of the item, and local industry and regional
contexts) may also be included.
Codes of practice
Batasan variabel
BATASAN VARIABEL
Batasan variabel berhubungan dengan unit kompetensi secara keseluruhan.
Hal ini memungkinkan untuk lingkungan kerja dan situasi yang berbeda dapat
mempengaruhi unjuk kerja. Tulisan bercetak tebal dengan huruf miring, jika
digunakan dalam kriteria unjuk kerja, diuraikan di bawah ini. Kondisi penting
operasi yang mungkin ada pada pelatihan dan asesmen juga dapat
dimasukkan (tergantung dari situasi kerja, kebutuhan calon, aksesibilitas
terhadap
dan konteks
industri
lokal dan
regional).
Apabila
Referensi
dibuat
untuk Codes of Practise
Codes of item,
Practise
Standar,
norma,
prosedur, dan/atau
persyaratan
perusahaan
RANGE STATEMENT
field of testing
micro-syringe, split/splitless
head space analysis
thermal desorption
on column injection
packed columns, capillary columns, support
BATASAN VARIABEL
Australian
RANGE STATEMENT
BATASAN VARIABEL
ionisation
chemical,
plasma/glow
discharge, electron impact, electro spray,
electric field d a n laser ionisation
design layout - ion cyclotron resonance
fourier transform, ion trap, magnetic-sector,
quadrupole time of flight
ion detectors - channeltron, Daly, electron
multiplier tube d a n micro-channel plate
full scan atau or selective ion monitoring (SIM)
Pengujian yang
menggunakan
instrumen GC
RANGE STATEMENT
Sample preparation
derivatisation
identification of any hazards associated with the
samples and/or analytical chemicals
grinding, dissolving, extraction, filtration, refluxing,
centrifuging, evaporation, washing and drying
solid-phase micro-extraction
determination of, and if appropriate, removal
of any contaminants or impurities or
interfering substances
ultra-trace procedures requiring high purity solvents,
clean rooms, ultra clean glassware and specialised
glassware
Instrumental parameters
organochloride pesticides)
control of starting materials, in-process materials and
final products in a wide range of industry sectors
(pharmaceuticals, biotechnology, petroleum and
manufacturing)
multi-analyte determination
testing for contaminants in food and beverages
analysis of flavour and fragrance
GC parameters:
BATASAN VARIABEL
pestisida organoklorin)
Pengendalian bahan awal, bahan pada saat
proses, dan produk akhir dalam berbagai
sektor
industri
(farmasi,
bioteknologi,
perminyakan, dan manufaktur)
Penentuan multi-analit
Pengujian kontaminan dalam makanan dan
minuman
Analisis perisa dan pewangi
Karakteristik contoh yang Karakterisitik contoh yang dapat mempengaruhi
analisis meliputi:
dapat mempengaruhi
Adanya senyawa yang tidak mudah menguap,
analisis
seperti karbohidrat
Preparasi contoh meliputi:
Preparasi contoh
konversi ke volume kecil (1L)
derivatisasi
identifikasi bahaya terkait dengan sampel
dan/atau bahan kimia
menggiling,
melarutkan,
mengekstraksi,
memfiltrasi,
merefluks mensentrifugasi,
menguapkan, mencuci dan mengeringkan
solid-phase micro-extraction
menentukan, dan bila sesuai, menghilangkan
segala kontaminan atau pengotor atau
senyawa pengganggu
prosedur ultra renik membutuhkan larutan
Parameter instrumen meliputi
Parameter instrumental
Parameter GC:
Mode injeksi (langsung, split/splitless, on
kolom)
Contoh
manual/auto (injektor volume,
kecepatan dan waktu)
Pencucian pra dan pasca sampel
Kontrol aliran gas
Program
isotermal dibandingkan dengan
suhu
Program
tekanan tetap dibandingkan
dengan tekanan terprogram
Parameter
detektor/sumber
dan
sistem
RANGE STATEMENT
MS parameters:
Common analytical
procedure and equipment
problems
Hazards
system leaks
syringe blockage or incorrect type and
inappropriate septum
column overloading
contamination of sample, gas or solvents, lines or other
system elements and out gassing of traps
overcoming problems with interfering
substances by using SIM
lack of suitable reference standards
poor separation due to inappropriate selection of
column or operating parameters (temperature and
flow)
poor sensitivity
absence of peaks and presence of ghost peaks, split
peaks or distorted peak shapes and broad solvent peaks
baseline instability and non-reproducible retention
times
electric shock
biohazards, such as microbiological organisms and
agents associated with soil, air, water, blood and blood
products, and human or animal tissue and fluids
corrosive chemicals
sharps and broken glassware
BATASAN VARIABEL
Parameter MS:
Tekanan vakum dan aliran gas
Aliran gas nebuliser
Ionisation control
interface cone alignment
Ion lens voltage
mass analyser control
Solvent delay
Scan, mass start/end, scan time dan inter-scan
Permasalahan
prosedur dan
peralatan analitik
pada umumnya
delay
Permasalahan prosedur analitik dan peralatan pada
umumnya:
Kebocoran sistem
Sengatan listrik
Bahaya
RANGE STATEMENT
Addressing hazards
Unit Sector(s)
Unit sector
hot surfaces
flammable liquids and gases
fluids under pressure sources of ignition
disturbance or interruption of services
Testing
use of MSDS
accurate labelling of samples, reagents, aliquoted
samples and hazardous materials
personal protective equipment such as gloves, safety
glasses and coveralls
use of fumehoods, direct extraction of vapours and
gases
use of appropriate equipment such as biohazard
containers, laminar flow cabinets, Class I, II and III
biohazard cabinets
handling and storage of all hazardous materials and
equipment in accordance with labelling, MSDS and
manufacturer's instructions
BATASAN VARIABEL
Permukaan panas
Cairan dan gas yang mudah terbakar
Cairan dibawah tekanan yang merupakan
sumber penyulutan
Gangguan atau interupsi pelayanan
Mengatasi bahaya
Persyaratan manajemen
kesehatan dan
keselamatan kerja (K3)
dan lingkungan
Sektor unit
Sektor unit
Pengujian
Competency field
Competency field
Co-requisite units
Co-requisite units
Bidang kompetensi
Bidang kompetensi
Unit terkait
Unit terkait