Académique Documents
Professionnel Documents
Culture Documents
253/08/13
KPC
|UK / RoI
Killeshal Precast
KERB RANGE
Garden Edgings
Special Wetcast Kerbs
Aggregate Kerbs
Natural Stone Kerbs
Channel Kerbs
Safety Kerbs
Gully Risers
Cast Iron Free Flow Lids
TRAFFIC MANAGEMENT
Sleeping Policeman
Traffic Calming
Wheel Stops
Ref: K/142
12 x 6 x 3 (300x150x914mm)
7 x 5 x 3 (178x116x914mm)
To suit Ref: K/176
Ref: K/143
6 x 5 x 3 (155x116x914mm)
Ref: K/196
Ref: K/160
KERB RANGE
Ref: K/159
10 x 5 x 3 (255x125x914mm)
7 x 5 x 3 (175x125x914mm)
Ref: K/183
Ref: K/155
HALF BATTER PRESSED KERBS
REFERENCE
914mm
457mm
301mm
10 x 5 x 3 (254x116x914mm)
K/142
7 x 5 x 3 (178x116x914mm)
K/143
12 x 6 x 3 (300x150x914mm)
K/160
6 x 5 x 3 (155x116x914mm)
K/196
REFERENCE
914mm
457mm
301mm
10 x 6 x 3 (255x150x914mm)
K/159
10 x 5 x 3 (255x125x914mm)
K/155
7 x 5 x 3 (175x125x914mm)
K/183
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given
as a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
10 x 5 x 3 (255 to 155x116x914mm)
To suit Ref: K/167
KERB RANGE
Ref: K/176
Ref: K/168
10 x 4 x 3 (254x116x914mm)
Ref: K/148
6 x 5 x 3 (155x125x914mm)
To suit Ref: K/168
Ref: K/145
10 x 4 x 3 DOUBLE BULLNOSED
(254x100x914mm)
Ref: K/167
Ref: K/152
REFERENCE
914mm
10 x 5 x 3 (254 to 178x116x914mm)
K/176
10 x 5 x 3 (255 to 155x116x914mm)
K/168
REFERENCE
12 x 6 x 3 (305x152x914mm)
K/148
10 x 4 x 3 (254x116x914mm)
K/145
6 x 5 x 3 (155x125x914mm)
K/167
10 x 4 x 3 (254x100x914mm)
K/152
457mm
301mm
914mm
457mm
301mm
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given
as a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
SPECIAL KERBS
250 x 220 x 1000mm
Ref: K/185
Ref: K/118
Ref: K/154
INTERNAL CORNER
10 x 5 (254x116x417mm)
Ref: K/151
90 EXTERNAL QUADRANT
254 x 150 x 300mm
KERB RANGE
Ref: K/130
GARDEN EDGINGS
5 x 4 x 3 WETCAST
(132x89x914mm)
Ref: K/140
SPECIAL KERBS
K/118
K/154
K/151
90 QUADRANT (254x150x300mm)
K/130
K/140
6 x 2 x 3 (152x54x914mm)
K/157
6 x 2 x 3 (152x54x914mm)
K/158
830mm
790mm
417mm
301mm
417mm
301mm
790mm
5 x 4 x 3 (132x89x914mm)
830mm
10 x 5 CORNER (254x116x417mm)
GARDEN EDGINGS
Ref: K/158
Ref: K/157
830mm
790mm
417mm
301mm
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given
as a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
Ref: K/188
Ref: K/165
Ref: K/170
Ref: K/174
175 x 100 x 1000mm
KERB RANGE
NATURAL STONE
KERBS
Ref: K/189
250 x 125 x 1000mm
Ref: K/190
Ref: K/191
REFERENCE
1000mm
380 x 90 x 900mm
K/165
K/188
REFERENCE
1000mm
K/174
K/170
REFERENCE
1000mm
K/189
K/190
K/191
914mm
900mm
300mm
914mm
900mm
300mm
900mm
300mm
914mm
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given
as a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
CHANNEL KERBS
10 x 5 x 3 (255x125x914mm)
12 x 6 x 3 (305x150x914mm)
NEW!
Ref: K/144
ULMA DRAINAGE KERB
(254x116x300mm)
Ref: K/195
Ref: K/187
460 x 75 x 400mm
Ref: K/111
Ref: K/156
SAFETY KERBS
Typical Safety Kerb Details
KERB RANGE
Ref: K/116
Ref: K/117
SILT BOX (250x450x310x550mm)
AND LID (65x270x400mm)
To suit:
- Ref: K/ 117
- Ref: K/116
- Ref: K/117b
Ref: K/117b
Ref: K/114
To suit:
- Ref: K/ 117
- Ref: K/116
- Ref: K/117b
Ref: K/115
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given
as a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
UNTRAPPED GULLY
UNTRAPPED GULLY (800x380x455mm)
Ref: G/1
Ref: G/1 +
G/G 104 + C/250 (G/9)
TRAPPED GULLY
TRAPPED GULLY (800x500x375mm)
Ref: G/2
Ref: G/2 +
G/R 104 + C/250 (G/9)
Ref: G/5
Ref: G/5 +
G/R 103 + C/250 (G/9)
GULLY RISERS
970x970x85mm
750x650x100mm 750x650x100mm
To suit:
To suit:
- G/5
- G/5
Ref: G/5 +
G/R 102 + C/400 (G/10)
527x527x100mm 515x395x75mm
To suit:
To suit:
- G/5
- G/1
- G/2
- G/5
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given
as a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
TRANSITION (297x462x255x1000mm)
R
Ref: K/136-2
Ref: K/136-1
Foundation details
SLEEPING POLICEMAN
200 x 220 x 200mm
red*
Ref: K/139
TRAFFIC MANAGEMENT
TRAFFIC CALMING
SPEED CUSHIONS
Widths:
- 1600mm
- 1700mm
- 1800mm
- 1900mm
SPEED RAMPS
charcoal*
natural*
WHEEL STOPS
140 x 290 x 1560mm
Lengths:
- RC-250 Speed
- 2000mm Guidance 0-10mph
- 3000mm
- RC-450 Speed
- 4000mm
Guidance 10-15mph
- RC-900 Speed
Guidance 15-20mph
Ref: COL/107a
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given
as a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
STANDARD LENGTHS:
- 914 mm
- 510 / 582 mm
- 457 mm
- 420 / 430 mm
- 301 mm
Ref: TM/101
LAYING RECOMMENDATIONS
New Construction:
Foundation to be 215mm thick
(minimum).
Construct foundation 625mm wide
from carriageway edge.
Haunching re-bar (350mmx16mm dia.)
at 425mm centers.
Re-bar to be 160mm from outside
edge of foundation and project
150mm vertically from concrete.
Re-bar not required if there is
haunching or backfill on top of the
Traffic Management Kerbs.
Traffic Management Kerbs should
be laid at 20 to 70mm above road
level.
Bedding material -1:3 cement and
sand mortar.
Backing concrete - C 7.5 concrete
extended at least to 100mm from
top edge of the kerbs.
Existing Carriageway:
Remove kerbs or road edge.
Foundation to be 215mm thick
(minimum).
Construct foundation 625mm wide
from carriageway edge.
Haunching re-bar (350mmx16mm dia.)
at 425mm centers.
Re-bar to be 160mm from outside
edge of foundation and project
150mm vertically from concrete.
The concrete foundations should
be scored to assist bonding with
the mortar.
Bedding and concrete specifications
as opposite.
Laying details
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given
as a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
60 QUADRANT
Ref: TM/110
90 QUADRANT
Ref: TM/109
INTERNAL CORNER
Ref: TM/106
90 CORNER
Ref: TM/111
Standard type 90
quadrant section
Standard type 90
quadrant section
Standard type 90
quadrant section
Standard type 60
quadrant section
Standard type 45
quadrant section
TAPERS
To allow Killeshals High Containment Kerbs to return to the normal lower
profile of the roadside kerb, a taper unit has been developed. Tapering the
Traffic Management Kerb profile to normal roadside kerb is completed in
two units. The High Containment Kerbs match to half batter and splayed
roadside kerb.
250 x 125 x 914mm
340 x 250 x 914mm
L1
R1
Ref: T/105
L2
R2
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given
as a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
10
ROAD
INTERNAL RADIUS
RADIUS
(M)
DIM AT C=0 MM
JOINT DIM
457 UNIT
JOINT DIM
301 UNIT
AT B
AT A
AT B
AT A
AT B
AT A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
13
28
19
N/A
N/A
19
13
12
13
28
14
15
11
23
11
18
19
10
21
16
24
14
27
13
30
11
33
10
36
10
39
External Radius
The table below shows the radii which can be accomplished using both standard, special and
short lengths. The radii are obtained by adjusting the joint width. These radii would more often
be used to form the inner boundaries of roundabouts.
EXTERNAL RADIUS
KERBS
JOINT DIM
914 UNIT
JOINT DIM
457 UNIT
AT B
AT C
AT B
AT C
AT B
AT C
AT B
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
10
18
11
20
1.5
N/A
N/A
N/A
N/A
11
20
13
N/A
N/A
12
N/A
N/A
15
10
2.5
11
20
15
12
23
12
18
10
19
10
-1
-1
3.5
-6
-11
21
17
-1
-2
-10
-20
24
15
-2
-3
4.5
-14
-26
27
13
-2
-4
N/A
N/A
N/A
30
12
-2
-5
N/A
N/A
N/A
33
11
-3
-5
N/A
N/A
N/A
36
10
-3
-6
N/A
N/A
N/A
39
-3
-6
N/A
N/A
N/A
RADIUS
(M)
ROAD
HIGH CONTAINMENT
Radius
To assist the engineer and project
planner, the details opposite illustrate
how various radii can be achieved.
JOINT DIM
914 UNIT
DIM AT A=0 MM
JOINT DIM
420/430 UNIT
JOINT DIM
301 UNIT
JOINT DIM
RADIUS 510/582 UNIT
(M)
AT C
AT B AT C
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given
as a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
11
KPC
|UK / RoI
Killeshal Precast